Please HELP!!! Signed Applet .. Printing Problem..
Hi.. I wrote a signed applet that would send info to the client's printer.. I have it working in the appletviewer.. but when I try to send something throught the IE, it complains about missing java.awt.print package.. anyone had any problems with printing .. Please help..
give more detail!
Similar Messages
-
Please Help - signed applet wierdness
I have a signed applet. Signing works fine.
I get the following error:
Exception occurred during event dispatching:
java.lang.StackOverflowError
at java.io.FilePermission$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.io.FilePermission.init(Unknown Source)
at java.io.FilePermission.<init>(Unknown Source)
and so on... (about 5 pages worth).
This occurs on the following line:
KeyPairGenerator keygen = KeyPairGenerator.getInstance("RSA");
Please note that when I run this not in the plug in (just unit testing) it works fine. I have included all the necessary jars etc (note that it is not a class not found error). The signing works fine, the applet is trusted and can do trusted things.
Please help, I have been stuck on this for quite some time, and it is getting quite urgent. I am getting more and more dismayed with the problems that seem to be inherent with the java plug in.Hi,
I am getting the same problems as yours...using Plugin 1.3.0 i get the same error, even though no problem when debugging-running outside the sandbox...
Did you get how to do, please?
Thank you!
Marzio
([email protected]) -
Please help! urgent printer problem.
I was using my printer in the mourning, and i got a paper jam. so i removed the paper, however after that nothing else wuld print. i just shut it off because i had to go to school. when i came home i tried various options, but it still had a jam. i removed and replaced the ink cartridges, i made cure the carriage could slide back and forth, i shut the printer on and off. However, the yellow light, and power button continue to blink on and off. when i attempt to print, it slowly takes a paper up, but it doesnt even print on it. and then it just spits it out. My printer is an HP officejet pro 8000 wireless. plz help
Hope that you have better luck than I have had, I just got told that I can pay more than I originally paid for my printer to have something fixed that is HP issue. But since I did not get to them within the year, even though I tried and tried to get them to help I am out of luck.
But what it sounds like is that you have a piece of paper stuck in one of the sensor areas that is causing the printer not to function properly. Take out your paper, and open the back and insure that there is not a small piece of paper not stuck in there somewhere that is causing your issue -
Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens
Hi Glenn,
Kindly try out the steps mentioned in the link below and see if you are able to serialize your software.
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Try Solution 2: Clean up cached user login information.
Please share the results after performing the steps.
Thanks,
Atul Saini -
Everytime I open firefox, all words or letters below the toolbar half inch to 3 inch from right to left are not clickable(not working). but they are working or clickable on google crhome or internet explorer. please help to resolve this problem. thanks!
The '''''Yahoo! Toolbar''''' and the '''''Babylon''''' extension have been reported to cause that problem. They seem to invisibly extend downward over the top of the web page display area. Disable or uninstall those add-ons.
*See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*See --> http://kb.mozillazine.org/Uninstalling_toolbars
*See --> https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020 monochrome)
I had the exact same problem
It turns out I was using a 20 foot USB cable between the printer and the Airport Extreme and the signal had become to weak to work. Try using nothing more than a 6 foot cable or try a new cable -
Please help me in Printing a text file :-(
Hi,
I have asked this question 3 times, but I didnt get any reply. Can someone please help me in printing a text file to a printer using java. I am able to print it but the problem is the whole file is printed in a messy way. Is there any method in java that prints the text file exactly how it is?
Thank u very much.JavaWorld has a series of articles on how to print using Java: http://www.javaworld.com/javaworld/jw-10-2000/jw-1020-print.html
-
hello,
i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed
-
Dear sirs,
Could you please help me on my problem with my apple ID
I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,
My account have 50$ and still didn't buy anythingYou need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100546) -
I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1
I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated. -
Hi,
A few songs from my old purchase is not available for download. It shows as purchased but I can't download it. Please help me resolve this problem, what do I need to do to enable download for all my purchased songs/movies etc.
- AvinashThe purchases are probably hidden:
http://support.apple.com/kb/ht4919 -
I cannot install Itunes and Icloud on my Sony Vaio Laptop - Window 7. Error says " computer/system not modified". Please help me with this problem.
Hello there, jag123059.
The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Urgent, Please help me in this problem.I am getting problem while installation
I am using Windows 8 in my system. I am trying to install Sql Server in system . Everything is fine, but finally when i click on install button i am getting the following error .
please help me quickly. I well be thankful to you.Triple post meanwhile:
http://social.msdn.microsoft.com/Forums/en-US/7fafa499-ca1e-42f7-a117-73df924d9847/urgent-please-help-me-in-this-problemi-am-getting-problem-while-installation?forum=sqlsetupandupgrade
http://social.msdn.microsoft.com/Forums/en-US/a1c7978c-2f84-495f-a8b6-9e9fe46654d7/getting-problem-while-installing-sql-server-2012?forum=sqlsetupandupgrade
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Could you please help me with the problem. I have macbook with retina with mac os 10.7.4 ann want to update it to mac os 10.7.5. I had been waiting for 2 hours to do it and had tried 3 times but it appeared that it was impossible. What should I do?
You can download the standalone updates:
OS X Lion Update 10.7.5 (Client Combo)
OS X Lion 10.7.5 Supplemental Update -
Urgent Please help with a Conferencing problem in CUCM 6.1
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
We have a configuration of CUCM 6.1. We have 24 voice ports (FXO) configured in H 323 registered with the call manger. A CUE 3.2 configured for IVR and mail box. Gateway is a Cisco 3845 and the IOS version is 12.4(15) T10
The problem is whenever a conference is configured with an outside number the FXO port is not releasing after the call disconnects. It is not FXO disconnect problem. This happens only when a conference is taking place. There is no problem with any other outside or inside calls.
I am attaching the configuration of Gateway. Please help me with the problem, I am very much thankful for you that.The Family pack covers upto 5 computers, other Install Disc cover one computer only.
-
Z10 not working at all please help in solving this problem
Z10 has been stuck in "Preparing Blackberry HUB" mode for hours despite several restarts and battery pulls. Five swipe solution to restarting HUB only results in screen flashing on and off. Frustrated. Any ideas appreciated. Phone calls too not working, cant receive email, text messages or launch applications although preview screen seems to be working.
Have reviewed other threads for solution with no success. Would rather not use security wipe option.
Please help in sloving this problemI would start with a Security Wipe:
To perform a Security Wipe please follow the instructions below. Be sure and use BB Link to make a full backup before proceeding with the wipe:
http://www.blackberry.com/btsc/KB33591
Once the wipe is complete you can restore your backup. Keep in mind that data in the backup may be the source of the original problem and restoring it may restore the problem, as well. To alleviate this I recommend not restoring the Settings portion of the backup.
If that doesn't work then use an autoloader to reload the OS:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!
Maybe you are looking for
-
my phone has stopped connecting to my gmail account.When I click on the mail button it opens and the a message appears that says the user name and password for "imap.gmail.com" is incorrect. My information is correct under settings I have even delete
-
Is it possible to have bookmarks that will auto-login to two different gmail and facebook accounts?
Right now I have separate user accounts for my wife and I, merely for the reason of keeping our bookmarks separate. Its forced us to come up with the usual workarounds for sharing iTunes, iPhoto, etc, and multi-users for us is only useful for keepin
-
How can I change my icloud email address on my pc?
How can I change my icloud emil address on my pc.
-
I get the following error message when trying to load Itunes: ' There was a problem with this windows installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.' Its a very vagu
-
Hi In Erec we have a Standard Job search Webdynpro Component HRRCF_C_SEARCH_UI Where we can search for the Jobposting based on Parameters like Functional Area, Corporate Title, Country, Location and Contract type, When we search based on Country and