Please Help! Small dot on my screen

There's a small dot/spot on my screen i thought it's a dust or soemthing but it looks like a small pixel dot. What is that? how can i get red of it?
Notice; am not using the glossy screen

Sounds like a stuck or dead pixel. Unfortunately, if this is the case, it is irrevocable, albeit minor, damage to the screen. Usually it is nothing you did or could have prevented; it just happens. If you se several, Apple might replace the screen, but they surely won't for one or two. Yes, I know it is annoying, but thats just one of the downsides to an LCD screen.
Read more about dead/stuck pixels on wikipedia:
http://en.wikipedia.org/wiki/Stuck_pixel
http://en.wikipedia.org/wiki/Dead_pixel
Don't forget to mark threads and replies as helpful or solved if this information is useful to you.

Similar Messages

HT4061 HI... i want to replace my front screen of 4S. Please help me to identify original screen with fakes?

i want to replace my front screen of 4S. Please help me to identify original screen with fakes?

Apple does not sell parts.
Either get the entire device replaced under Out of Warranty exchange or take your chances with non-oem parts.

Hello please help me my MacBook Pro screen when desktop switching fingers pressing 3 distorts a bit, with him?

hello please help me my MacBook Pro screen when desktop switching fingers pressing 3 distorts a bit, with him?

First, remove Comodo. You don't need it, and it sounds like it is causing a problem.
The other symptoms sound like you have adware installed. Comodo might have detected some components of that adware, or it might not have, but whatever the case, you should NEVER allow any anti-virus software to quarantine or delete files from your computer. See: How to remove infected files.
Regarding the adware, see my Adware Removal Guide.
(Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.)

PLEASE HELP ME! ( IMAC ERROR SCREEN AT START UP )

Hello everyone i have a massive problem that has been scaring me for the past months i have called applecare but they seem to not have the right answer i just hope that one of you people can help me.
i own a imac 27 inch 2011 model and just from couple of months ago i kept getting errors at the grey screen but before the error to appear a little grey screen scrolls from the top but anyway i cannot get a picture of it as my phone takes a while for the camera to appear but once my computer restarts itself ( because of the error ) a message pops up saying " Your computer was restarted because of a problem." i clicked on show details and everything you see below is exactly what is on the message pop up box ( please note that the stars indicate where the details of the error start and end )
*****START*****
Interval Since Last Panic Report: 148012 sec
Panics Since Last Report:          2
Anonymous UUID:                    DA9904ED-1814-4D1F-B45C-E4AB702C22BB
Tue Dec 20 17:12:29 2011
panic(cpu 4 caller 0xffffff80002c266d): Kernel trap at 0xffffff7f818f234b, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000004300000007, CR3: 0x000000002c4da020, CR4: 0x00000000000606e0
RAX: 0x0000004300000006, RBX: 0x0000000000000002, RCX: 0xffffff7f818f5922, RDX: 0xffffff80255ecd40
RSP: 0xffffff81c96cb9a0, RBP: 0xffffff81c96cb9f0, RSI: 0x000000008020690c, RDI: 0xffffff8026fee208
R8: 0x0000000000000000, R9: 0x000000000ffff084, R10: 0xfffffe800d0108b0, R11: 0x000000000001b6e0
R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0xffffff80253bbc30, R15: 0xffffff80251c60a8
RFL: 0x0000000000010282, RIP: 0xffffff7f818f234b, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000004300000007, Error code: 0x0000000000000000, Faulting CPU: 0x4
Backtrace (CPU 4), Frame : Return Address
0xffffff81c96cb660 : 0xffffff8000220702
0xffffff81c96cb6e0 : 0xffffff80002c266d
0xffffff81c96cb880 : 0xffffff80002d7a1d
0xffffff81c96cb8a0 : 0xffffff7f818f234b
0xffffff81c96cb9f0 : 0xffffff7f818f59b1
0xffffff81c96cba30 : 0xffffff7f818f3a0e
0xffffff81c96cba70 : 0xffffff8000344787
0xffffff81c96cbac0 : 0xffffff800039ca0d
0xffffff81c96cbb30 : 0xffffff800039e213
0xffffff81c96cbcd0 : 0xffffff800033f4c7
0xffffff81c96cbda0 : 0xffffff800033f672
0xffffff81c96cbdd0 : 0xffffff8000563f3f
0xffffff81c96cbe10 : 0xffffff8000563fe0
0xffffff81c96cbe40 : 0xffffff8000531453
0xffffff81c96cbe70 : 0xffffff8000561124
0xffffff81c96cbf60 : 0xffffff80005ca468
0xffffff81c96cbfb0 : 0xffffff80002d7f39
      Kernel Extensions in backtrace:
         com.logmein.hamachi(1.0)[4F10A12D-34FD-ACB0-81FB-036809497AFC]@0xffffff7f818f10 00->0xffffff7f818f6fff
BSD process name corresponding to current thread: hamachid
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 10498414190
last loaded kext at 9863914126: com.parallels.kext.prl_hypervisor          7.0 14920.689535 (addr 0xffffff7f818f9000, size 380928)
loaded kexts:
com.parallels.kext.prl_hypervisor          7.0 14920.689535
com.logmein.hamachi          1.0
com.parallels.kext.prl_usb_connect          7.0 14920.689535
com.apple.filesystems.autofs          3.0
com.apple.driver.AudioAUUC          1.59
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AGPM          100.12.42
com.apple.driver.AppleMikeyDriver          2.1.3f7
com.apple.kext.ATIFramebuffer          7.1.4
com.apple.driver.AppleIntelHD3000Graphics          7.1.4
com.apple.driver.AppleHDA          2.1.3f7
com.apple.driver.AudioIPCDriver          1.2.1
com.apple.driver.AppleMuxControl          3.0.16
com.apple.ATIRadeonX3000          7.1.4
com.apple.driver.AppleBluetoothMultitouch          66.3
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.driver.AirPort.Atheros40          501.58.1
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.5d4
com.apple.driver.AppleLPC          1.5.3
com.apple.driver.AppleBacklight          170.1.9
com.apple.driver.AppleIRController          312
com.apple.driver.AppleUSBCardReader          3.0.1
com.apple.iokit.SCSITaskUserClient          3.0.1
com.apple.driver.AppleUSBHub          4.5.0
com.apple.iokit.IOAHCIBlockStorage          2.0.1
com.apple.BootCache          33
com.apple.iokit.AppleBCM5701Ethernet          3.0.8b2
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.driver.AppleUSBEHCI          4.5.5
com.apple.driver.AppleAHCIPort          2.2.0
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleUSBUHCI          4.4.5
com.apple.driver.AppleACPIButtons          1.4
com.apple.driver.AppleRTC          1.4
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.4
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          167.1.0
com.apple.security.quarantine          1
com.apple.nke.applicationfirewall          3.2.30
com.apple.driver.AppleIntelCPUPowerManagement          167.1.0
com.apple.kext.triggers          1.0
com.apple.driver.AppleAVBAudio          1.0.0d11
com.apple.iokit.IOSurface          80.0
com.apple.iokit.IOBluetoothSerialManager          4.0.1f4
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAVBFamily          1.0.0d22
com.apple.driver.AppleHDAHardwareConfigDriver          2.1.3f7
com.apple.driver.DspFuncLib          2.1.3f7
com.apple.iokit.IOAudioFamily          1.8.3fc11
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.IOBluetoothHIDDriver          4.0.1f4
com.apple.driver.AppleMultitouchDriver          220.62.1
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.driver.AppleHDAController          2.1.3f7
com.apple.iokit.IOHDAFamily          2.1.3f7
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.iokit.IO80211Family          411.1
com.apple.driver.AppleSMC          3.1.1d8
com.apple.driver.IOPlatformPluginFamily          4.7.5d4
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.3
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.driver.AppleThunderboltEDMSink          1.1.3
com.apple.driver.AppleThunderboltEDMSource          1.1.3
com.apple.kext.ATI6000Controller          7.1.4
com.apple.kext.ATISupport          7.1.4
com.apple.driver.AppleIntelSNBGraphicsFB          7.1.4
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.driver.AppleThunderboltDPOutAdapter          1.5.8
com.apple.driver.AppleThunderboltDPInAdapter          1.5.8
com.apple.driver.AppleThunderboltDPAdapterFamily          1.5.8
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController          4.0.1f4
com.apple.iokit.IOBluetoothFamily          4.0.1f4
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.iokit.IOUSBMassStorageClass          3.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.1
com.apple.driver.AppleFileSystemDriver          13
com.apple.driver.AppleUSBMergeNub          4.5.3
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.driver.XsanFilter          403
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.0.1
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.7
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.driver.AppleThunderboltNHI          1.3.2
com.apple.iokit.IOThunderboltFamily          1.7.4
com.apple.iokit.IOAHCISerialATAPI          2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.1
com.apple.iokit.IOUSBUserClient          4.5.3
com.apple.iokit.IOEthernetAVBController          1.0.0d5
com.apple.iokit.IONetworkingFamily          2.0
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IOAHCIFamily          2.0.7
com.apple.iokit.IOUSBFamily          4.5.5
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.TMSafetyNet          7
com.apple.security.sandbox          165.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331
com.apple.iokit.IOStorageFamily          1.7
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.4
com.apple.iokit.IOPCIFamily          2.6.7
com.apple.iokit.IOACPIFamily          1.4
Model: iMac12,2, BootROM IM121.0047.B1D, 4 processors, Intel Core i7, 3.4 GHz, 16 GB, SMC 1.72f2
Graphics: AMD Radeon HD 6970M, AMD Radeon HD 6970M, PCIe, 2048 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.58.4-P2P
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST32000541AS, 2 TB
Serial ATA Device: APPLE SSD TS256C, 251 GB
Serial ATA Device: OPTIARC DVD RW AD-5690H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: EyeTV Hybrid, 0x0fd9, 0x0018, 0xfa120000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
*****END*****
please help me! any help will do! ANY!! ( if you are going to comment about restoring then please is there a way to stop it from deleting everything? because i have lots of important stuff on my imac)
Thanks for any help in advance.

Ok,
Firstly, I reccomend starting your machine in Safe Boot, and seeing if it occurs again. You can do this by holding the shift key immediately as the machine starts up. If you notice that it never occurs in this mode, it is likely a temporary issue. You may like to backup, and then run a clean install of your OS. If the issue still occurs then follow the steps below.
Repair disk permissions. Open disk utility app, select Macintosh HD, and then repair permissions. Then go ahead and follow the following steps.
Check peripheral devices first
Skip this section if you have no peripheral devices.
Power off your Mac.
Disconnect all peripheral devices and Ethernet cables until all you have connected to your Mac is a display, keyboard, and mouse or trackpad.
Power on your Mac and start from the external hard disk.
Use the Apple applications on your external hard disk to surf the web, view QuickTime movies, email, print, scan, sync iOS devices, and other things. Continue using your Mac for the amount of time it would usually take for the kernel panic to occur.
If the kernel panic does not occur: Power down your Mac and connect one peripheral at a time; repeat the above steps until you find the peripheral causing your kernel panic.
If the kernel panic does occur: Proceed to check the internal RAM and third party hardware.
Check internal RAM and third-party hardware
Power off your Mac.
Reseat your Apple RAM, and remove third party RAM and third-party hardware. If you do not have the Apple RAM that came with your system, reseat the third-party RAM.
Power on your Mac and start from the external hard disk.
Use the Apple applications on your external hard disk to surf the web, view QuickTime movies, email, print, scan, sync iOS devices, and other things. Continue using your Mac for the amount of time it would usually take for the kernel panic to occur.
If the kernel panic does not occur: Your third-party RAM or internal third-party hardware may need to be replaced.
If a kernel panic does occur: Bring your Mac to a Genius at an Apple Store, or an Apple Authorized Service Provider for service and support. Be sure to ask that, if the hard disk needs reformatting or replacing, they contact you about escalating your case to a special data recovery service. If you plan to visit an Apple Retail store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Software troubleshooting
Reinstall Mac OS X v10.6 (or, for Mac OS X v10.5, perform an archive and install) on your internal hard disk.
Start from the internal hard disk.
Run Software Update.
Install all updates until Software Update reports "Your software is up to date."
Download and install any third-party software updates before reinstalling third-party software, especially drivers and kernel extensions.
Examples include:
Virtualization software – Parallels, VirtualBox and VMware
Drivers for display cards – ATI and nVIDIA
See if this helps, and get back to me,
Nathan

PLEASE HELP!!! Black Screen with white curser at startup...

at startup after grey screen fan turns on and screen turns black with a white curser in the upper left. Then one line of text shows saying something to do with single user mode failed with a bunch of other text. (sorry I didn't write it down) It then vanishes for a minute with just the white curser remaining and repeats.
Ran hardware test... everything OK
I have repaired permissions which took almost an hour of CD.
I tried repairing disk failed " Invalid Key Length, volume check failed" twice.
I am currently running os off external backup HD.
I tried doing a archive and install but said I could not because the my os software(10.4.11) was newer than my original CD (10.4), is that correct?
I do not know what to do? Please help!!!!

You will need to reinstall OS X, but you cannot do an Archive and Install until you repair the drive. See the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Please help Excite 10 AT305-T16 screen not working

Hello my Excite 10 AT305-T16 WAS stuck on the lock screen. I reset it to factory settings by holding the "+" and power button. I was sure that this would have resolved the issue with my tablet but it didn't. I am still unable to use the screen of my tablet. The only thing I can do is power it off, by holding the power button. I'm not sure what to do with it now. other than continue to power it on and off even though there hasn't been a change in what's happened. Please help, I would like to be able to use it again.
P.S. I have never spilled anything on it, or dropped it.

It sounds like you'll need to contact customer support and set up a repair.
You can call (800) 457-7777.
- Peter

Please help!! Iphone 4 screen issue

starting last month a yellow spot on the left side of the screen started to get brown . It happened suddenly.Its increasing in size in a longitudinal way . I didn't drop the phone and never had any damage . So what can i do now? Please help .......

bring your phone in for evaluation.

Please help : small error

I have this piece of code . I am getting error that
use of loop variable 'i' is invalid.
Please help
CREATE OR REPLACE procedure A
is
v_commit_count number(10);
v_wf_id number(8):= 20001;
v_atlanta_operator number(8);
cursor c1 is
select * from customer_query_progress;
type temp_c1 is table of customer_query_progress@slpmig1%rowtype
index by binary_integer;
t2 temp_c1;
procedure do_bulk_insert is
begin
forall j in 1..t2.count
insert into customer_query_progress@slpmig1 values t2(j);
commit;
t2.delete;
k:=0;
end do_bulk_insert;
begin
select value into v_commit_count from t2_system_parameter where name='batch_size';
select value into v_atlanta_operator from t2_system_parameter where name='atlanta_operator';
for i in c1 loop
k:=K+1;
t2(k).customer_query_id:=i.CUSTOMER_QUERY_ID;
t2(k).last_modified:= i.LAST_MODIFIED;
t2(k).PROGRESS_SEQNR := i.progress_seqnr;
t2(k).OPEN_QUERY_IND_CODE:=i.OPEN_QUERY_IND_CODE;
t2(k).WORK_FORCE_ID:=v_wf_id;
t2(k).OPEN_DATE:=i.open_date;
t2(k).RESPONSE_DUE_DATE:=i.RESPONSE_DUE_DATE;
t2(k).PROGRESS_TEXT:=i.progress_text;
t2(k).ACTION_DATE:=i.action_date;
t2(k).ACTION_TEXT:=i.action_text;
t2(k).ATLANTA_OPERATOR_ID:=v_atlanta_operator;
t2(k).RESOLUTION_TEXT:=i.resolution_text;
if mod(k,v_commit_count)=0 then
do_bulk_insert;
end if;
end loop;
do_bulk_insert;
end;

You have to declare and initialize k (to zero, I think):
CREATE OR REPLACE procedure A
is
k pls_integer := 0;
Regards,
Gerd

Please help my iphone got white screen and stopped working

i restored to default factory setting and errased every thing even the operating system and i got white screen and i tried to restore it but i didnt successd i connected it to the itunes and when it is recognized by itunes but after connecting this messege came out " unknown erroe 1604"
i tried many ways but no hope to get my iphone work , i think the bootloader is corrupted any help please?

See this post:
http://discussions.apple.com/thread.jspa?threadID=1153287&tstart=135

Please help!! x100e blue screen issue

Hey everyone,
I'm new on here, trying to help out my sister who's in school and so far failing miserably!
She has a x100e and developed the blue screen issue.
I did a bunch of reading on it- but have never seen an error message.
I formatted the hard drive for her (it needed it anyways) hoping that would help. It didn't. It also lost the wi-fi, I had to download a new driver from lenovo to get the wi-fi working again. It is now working, but still has the blue screen.
Any help? I wanna give it back to her but proving to be useless.
Thanks for any and all help!

How will anyone help you w/o error message on the top of blue screen and problem signature description?
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Please help - do I have a screen saver virus?

I have my screen saver set to display pics from iPhoto. All of the sudden the pics are now becoming fuzzy and random foreign objects are showing up, covering and distorting the pics. How can this be fixed? Do I have a virus?
Message was edited by: Kurko

Hello, Leopard came with pictures installed for some reason or another. If they are coming up with iPhoto, in the screensaver mode, delete them. They will be found in your Pictures and All Documents folder, along with some music Apple so kindly gave us. In iPhoto you can chose the slide show and resolve this issue without deleting the "pictures." I don't think the previous poster was incorrect, just brief. "Completely impenetrable", wonder what Freud would think of this terminology. (Just kidding, don't get angry life's too short for all that) This is an answer, and I hope you take it with the good spirit in which it is intended. I post here to help, and try to add humor if applicable. The solution is in iPhoto, set up a slide show. Delete unnecessary photos if you like.
Hope all is well,
Ray

Please help with bypassing bootup selection screen. MB:MSI Z68A-GD80

Hi Guys,
I was wondering if you could help me bypass the boot-up selection choices screen and go directly into Windows.
My MB is MSI Z68A-GD80. I want to remote control this pc, but with the selection boot option screen keeps coming up after rebooting, it might not work.
Is there a setting somewhere to disable this and go directly to Windows? I tried different setting in the Setting menu, but not working.
Thanks in advance!
Rich

Enter BIOS 'Settings', 'Boot', enter (red arrow) UEFI & disable, enter & either leave alone or disable as to preference (blue arrow), USB HardDisk set as desired, etc. Then, in the 'Boot Option Priorities' (white arrow pointing at 1 thru 8 boot list in this example), start at the bottom & disable as you go upward until you have only set for #2 as example, CD/DVD drive, & for #1 boot device, your OS HDD. Hit the 'F10' key & the 'Enter' key & it should be set correctly to what you want.

Please help: When running video software, screen goes crazy

I am experiencing the following issue and have already taken my computer (under warranty) to the Genius Bar where they say nothing shows up as being wrong. They want to do further testing but I can't part with the laptop till the work week is over tomorrow night.
In the meantime, does anyone have a clue?
Here are videos of what's happening:
http://s320.photobucket.com/albums/nn347/Rainbocarnage/?action=view&current=VID_ 20110616_155456.mp4
http://s320.photobucket.com/albums/nn347/Rainbocarnage/?action=view&current=VID_ 20110616_115826.mp4
I comes on gradually with an all over "blink" and flicker before it freezes up and goes crazy. This only happens, so far, when I use a program called CatDV which is a footage cataloguing software I need at work.
Any ideas or suggestions? The genius bar did quick diagnostics and said everything passed and I updated all software/system updates already.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Please help me. I have a deadly white screen.

I kept my i touch in my back pocket. not thinking anything of it because I have done it before with no problems. Now when I turn it on I have a white screen. I have tried reseting it, and pluging it in. If you have any idea of what i can do please help me.

Ah, the White Screen of Death. To resurrect:
http://www.iphlogger.com/2009/how-to-fix-the-ipod-touch-white-screen-of-death.ph p

PSE 8 Editor will not launch-Please HELP!

I purchased PSE 8 and installed it to my computer, which meets all system requirements.
After everything was installed, I opened and Adobe ID account. When the welcome screen appears and I click on "Edit" the screen says "Launching Editor" for about 3 seconds, stops, and then nothing happens. I read the "Read Me" section that comes with the software and it mentions a problem with the Editor Launcher having trouble initializing. The instructions are to click "Edit" from the welcome screen, then click SHIFT+ALT+CTRL (or whatever order, I've tried everything) and then click "YES" for rebuilding editor launching preferences. Well, when I click "Edit" and SHIFT+ALT+CTRL, NOTHING happens!!!! I don't get any kind of response.
I have unistalled, reinstalled... I am so frustrated. I have used PSE 3 in the past and have never had any trouble. I have already wasted 2 hours on this program and I haven't even used it!
Please help me,
MarieAntoinette1234 (And my screen name sucks!)

Unfortunately, there are many reasons why the PSE Editor might crash, and often it is hard to diagnose quickly the reason for the crash. Here are some steps you can take to try to fix the problem:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Troubleshooting_Editor_cra shes

Please Help! Small dot on my screen

Similar Messages

Maybe you are looking for