Please help solving error 1322 while installing Labview 6i

Since I've upgraded my computer with Windows 2000 professional, and interupted once the install, I can't install Labview 6 anymore.
I get error 1322 from the installer, even when i install plain Labview files (no ivi, nidaq etc.)
Darren's solutions doesn't work
Please help

Ronald,
First of all let's make sure that we have a clean computer, that is I suppose you don't have more NI software on it so you may want to check that in your hard drive you don't have any National Instruments folder under the Program Files directory. And best of all you may want to check your Windows Registry, NOTE: This is very delicate so you must be careful. Go to Start >> Run.. type: "regedit" and enter, first of all make a backup copy of this file... then browse through: HKEY_LOCAL_MACHINE >> SOFTWARE >> National Instruments.... you should not have this folder if you haven't install LabVIEW... so you may delete it... "ONLY THIS FOLDER (National Instruments)"..., once you finish close the registry.... and reboot the computer... once back re-check all what
we have done here.... and if everything is ok then let's proceed again to install LabVIEW... if you get the same error please try to install LabVIEW (plain files again, not any driver) in another machine to know if the CD is damaged or not... this type of installation problem Ronald can also be better troubleshoot by phone, the information to contact us is at... www.ni.com/ask , and if there is a need to call us then tell the person in the line about this procedures that you have already tried.
Good luck!...
Nestor Sanchez
Applications Engineer
National Instruments
Nestor
National Instruments

Similar Messages

  • Please help with error message while trying to update i tunes

    Errors occurred while installing the updates, if the problem persists, choose tools, download only and installing manually

    When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar.
    ... that's an unusual one.
    could you possibly send us a screenshot of the error message box? for instructions, see the following user tip:
    hudgie: Taking screenshots to help with problems

  • How do  I solve error 1334 while installing Acrobat 11

    While installing acrobat11 standard I receive error 1334. How can I solve this?

    http://msdn.microsoft.com/en-us/library/aa372835(v=vs.85).aspx
    1334
    The file '[2]' cannot be installed because the file cannot be found in cabinet file '[3]'. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
    Are you using an AIP installation?
    Are you using a DVD?
    Are you connecting to a network resource?

  • Error 1326 while installing labview 6 on windows 2000

    I am trying to install LabVIEW 6 on a windows 2000 system. I get an error 1326.Error getting file security
    C:\WINNT\system 32\comctl32.ocx GetLasterror:5

    I think this is a MS error code. Have you made sure that you have administrator privileges?
    Jeremy

  • Help! Error messages while installing the trial version of Indesign.

    I got about 100 error messages that I needed to "contact my vendor to get a compatible version of (some such).InDesignPlugin" when installing the trial version of inDesign CC. There were literally dozens, one right after the other. Not sure what I need to do.

    Nevermind, I just made inDesign force quit, then restarted it and it worked.

  • PLEASE HELP SOLVE ERRORS

    Hi I'm new to Java & trying to create a simple calculator program by reading in three integers but I'm not exactly sure how to do it, I have attempted it below but keep getting errors, if anyone could tell me how to correct my code so I can read in the integers a,b,c when prompted to input them.
    My code and the errors are below
    //import ;
    public class quadratic {
         public static void main( String args[] ) {
         double a, b, c;
    System.out.println("\nA simple calculator program");
    System.out.println("\n\nPlease enter a value for A");
    a=(int)System.in.read();
    System.out.println("\n\nPlease enter a value for B");
    b=(int)System.in.read();
    System.out.println("\n\nPlease enter a value for C");
    c=(int)System.in.read();
    Errors:
    A:\>javac quadratic.java
    quadratic.java:26: unreported exception java.io.IOException; must be caught or declared to be thrown
    a=(int)System.in.read();
    ^
    quadratic.java:29: unreported exception java.io.IOException; must be caught or
    declared to be thrown
    b=(int)System.in.read();
    ^
    quadratic.java:32: unreported exception java.io.IOException; must be caught or
    declared to be thrown
    c=(int)System.in.read();
    ^
    3 errors
    Thanks for any help.

    "System.in" is an InputStream and the "read" method can throw an IOException so you need to catch it. You should also probably check that the String read from System.in is an integer before you cast to (int).
    e.g.
    String s;
    try {
    a = Integer.parseInt(System.in.read());
    } catch (NumberFormatException nfexc) {
    ... code to handle non-integer ...
    } catch (IOException ioexc) {
    ... code to handle when an IO error occurs ...

  • I purchased mountain lion, but after numerous attempts until my fingers all gone numb, i simply cannot install it on my imac. i get this error message: "an error occurred while installing OS X, you cannot install OS X on this disk......". please help.

    I purchased mountain lion, but after numerous attempts until my fingers all gone numb, i simply cannot install it on my imac. i get this error message: "an error occurred while installing OS X, you cannot install OS X on this disk......".
    please help!
    imac specs:
    IMAC 24 inch Mid 2007
    Intel 2.4 GHz 2 duo
    4GB SDRAM
    OS X lion 10.7.4
    200 GB Harddrive space free

    Tell us more about the disk and partition onto which you are trying to install Mountain Lion:
    Open Disk Utility (in Applications > Utilities). The left column should show your disk with its partition(s) indented below it:
    How is the disk (top level container) formatted according to Disk Utility:
    * What Partiton Map Scheme? (Should be "GUID Partition Table".)
    * How many partitions? (Should be 1 unless you have a Boot Camp partition.)
    How is the partition (lower level container) formatted according to Disk Utility? (Should be "Mac OS Extended (Journaled)".)
    Message was edited by: markwmsn
    (image inserted)

  • Run time error while installing Labview 8.6.1 in Vista x64

    hai friends,
               i got an error( Run time error) while installing Labview 8.6 software. this software has bought from NI. it shows the error path as setup.exe. this software i had tried to install in vista x64. but when i am installing the same software in windows xp, it is installing fine...so what was the problem for this error. how to solve it, please help me....

    Thank You Mr.Jason Daming,
    Same error what post Mr.muks referred in the last reply....
    When the installation begins an error occurs (after the acceptance of licence step in the installation procedure) with the title on the error window "Microsoft Visual C ++ Runtime Library " and displays the program set up path with these statements " This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
    while installing the same Labview in windows XP..... it is installing fine... but in vistax64 only i am facing this kind of problem...

  • Get Error -An error occurred while installing the extension "Lastpass". Not just Lastpass, ANY extension I try to install HELP!

    I am getting an error - An error occurred while installing the extension “Lastpass”. Not just Lastpass, ANY extension I try to install. I just updated to Mavericks 10.9.1. Safari version 7.0.1. This is super frustrating. I was going to try to delete the extentions.plist and I cannot find that. I reset Safari. I tried just sropping files into the extentions folder, that doesn't work. Can someone please help?

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked
    Allow user to administer this computer
    Then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password dialog will open. You’re not going to reset a password.
    In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
    Select your username from the menu labeled Select the user account if it's not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Error while installing LabVIEW on Linux

    Getting Error while installing LabVIEW on Linux and unable to use VISA.
    Please check the installation Log i Have attached.
    nilesh
    Attachments:
    Installation Log LV2012 Linux.txt ‏25 KB

    I could not find a trail version for LINUX. 
    Its only available for Windows and mac.
    Will it possible for you to give just the C++ library and include files??

  • HT1338 An error occurred while installing the updates.(103) Someone can help me? My os x version is 10.8.2

    hi Guys
    Im trying to make the update on my IMAC and i always get an error saying: an error occurred while installing the updates ( 103 )
    Thanks and hope some one can help me
    Cheers

    It would be helpful to know to what update you are referring. For now try this:
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Download and install OS X Mountain Lion Update v10.8.3 (Combo).

  • TF255424: An error occurred while installing SharePoint Products. (SharePoint 2012)

    I want to install both SQL Server and Team Foundation Server on the same machine. Operating system of my server machine is Microsoft Windows Server 2008 R2 Service Pack 1. I first install Microsoft SQL Sever 2012 Enterprise edition without any error. After
    that i tried to install Microsoft Team Foundation Server 2012. Team Foundation Server configuration got complete. Microsoft SharePoint Foundation 2010 installed successfully but while configuring SharePoint extension i am getting the following error.
    "TF255424: An error occurred while installing SharePoint Products. For more information, open Event Viewer and review the application log. You might need to manually install Windows SharePoint Foundation 2010."
    Please help.
    [Info   @12:19:36.259] 
    [Info   @12:19:36.259] +-+-+-+-+-| Environment |+-+-+-+-+-
    [Info   @12:19:36.260] Environment: FullEnvironment
    Setup: 
    InstallPath: C:\Program Files\Microsoft Team Foundation Server 11.0\
    IsTfsExpress: False
    ToolsPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Tools
    ApplicationTierPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Application Tier
    BuildTierPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Tools
    ProxyPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Version Control Proxy
    SetupUser: ETS-WEBAPP\tfsadmin
    WebServicePath: C:\Program Files\Microsoft Team Foundation Server 11.0\Application Tier\Web Services
    LicenseEdition: PID_RANGE_VL
    SystemTfsTemp: C:\Windows\Temp\TFSTemp
    SharePointInstallTemp: C:\Windows\Temp\TFSTemp\WSSInstall
    InstalledLanguages: System.Collections.Generic.List`1[System.Int32]
    InstalledLanguagesString: 1033;
    OS: 
    MachineName: ETS-WEBAPP
    HostName: ETS-WEBAPP
    IsClientOS: False
    IsServerOS: True
    IsDomainController: False
    IsMachineInWorkgroup: False
    IsMachineInDomain: True
    IsHomeEdition: False
    IsUnsupportedEdition: False
    Version: Server2008R2
    MajorVersion: 6
    MinorVersion: 1
    ProcessorCount: 4
    ServicePackMajor: 1
    ServicePackMinor: 0
    IsOSPostTfsRelease: False
    VisibleMemoryMB: 12287
    AdjustedMemoryGB: 12
    Iis: 
    IsInstalled: True
    PreviouslyFailedConfig: False
    RequiredIisFeaturesInstalled: True
    OS: 
    MachineName: ETS-WEBAPP
    HostName: ETS-WEBAPP
    IsClientOS: False
    IsServerOS: True
    IsDomainController: False
    IsMachineInWorkgroup: False
    IsMachineInDomain: True
    IsHomeEdition: False
    IsUnsupportedEdition: False
    Version: Server2008R2
    MajorVersion: 6
    MinorVersion: 1
    ProcessorCount: 4
    ServicePackMajor: 1
    ServicePackMinor: 0
    IsOSPostTfsRelease: False
    VisibleMemoryMB: 12287
    AdjustedMemoryGB: 12
    Sql: 
    SqlInstance 0: 
    Name: MSSQLSERVER
    FullName: ETS-WEBAPP
    Edition: Enterprise Edition
    Version: 11.0.2100.60
    IsWow64: False
    LCID: 1033
    IsExpressEdition: False
    IsFullEdition: True
    IsSupported: True
    IsSharePointSupported: False
    IsUpgradable: False
    WindowsServiceName: MSSQLSERVER
    SharePoint: 
    IsInstalled: True
    IsProvisioned: False
    IsAdminDbConfigured: False
    IsAdminSiteConfigured: False
    IsRunningSiteOnWebAppPort: False
    Version: 14.0.6029.1000
    WssAdminUrl: http://ets-webapp:17012/
    WssSiteUrl: http://ets-webapp/sites
    ReportingServices: 
    IsInstalled: True
    DefaultInstance: 
    InstanceIdentifier: ETS-WEBAPP
    HostName: ETS-WEBAPP
    InstanceName: MSSQLSERVER
    ReportServerInstance: Microsoft.TeamFoundation.Admin.ReportServerInstance
    IsConfigured: True
    ReportWebServiceUris[0]: http://ETS-WEBAPP:80/ReportServer
    ReportManagerUris[0]: http://ETS-WEBAPP:80/Reports
    Instances[0]: 
    InstanceIdentifier: ETS-WEBAPP
    HostName: ETS-WEBAPP
    InstanceName: MSSQLSERVER
    ReportServerInstance: Microsoft.TeamFoundation.Admin.ReportServerInstance
    IsConfigured: True
    ReportWebServiceUris[0]: http://ETS-WEBAPP:80/ReportServer
    ReportManagerUris[0]: http://ETS-WEBAPP:80/Reports
    PowerTools: 
    IsBackupToolConfigured: False
    [Info   @12:19:36.260] 
    [Info   @12:19:36.260] +-+-+-+-+-| Configuration Plan |+-+-+-+-+-
    [Info   @12:19:36.260] - ContainerTask (ContainerNode) : root
    - ConditionalTask (ConditionalNode) : Provisioning SharePoint
    - ContainerTask (ProgressNode) : Configure SharePoint
    - ConfigureSharepointProvision (ConfigureNode, 208) : Configuring the SharePoint Products
    SqlInstance = ETS-WEBAPP
    AdminSiteAccountName = Domain\tfsuser
    PasswordSupplied = *****
    SiteUrl = http://ets-webapp/
    AdminPort = 17012
    TfsServiceAccount = Domain\tfsuser
    - ContainerTask (ProgressNode) : Extending SharePoint
    - ConfigureSharepointUploadData (ConfigureNode, 209) : Uploading solutions and templates ...
    - ConfigureResetSPTimer (ConfigureNode, 214) : Resetting Sharepoint Timer Service ...
    - ConfigureIisReset (ConfigureNode, 801) : Resetting IIS ...
    - ConfigureMarkFeature (ConfigureNode, 140) : Marking feature configured status
    FeatureType = SharePointExtensions
    IsConfigured = True
    - ConfigureWssHealthCheck (ConfigureNode, 210) : Check if sharepoint is responsive
    SiteUrl = http://ets-webapp/
    - ConditionalTask (ConditionalNode) : SharepointEntries
    - ContainerTask (ProgressNode) : Configuring Services
    - ConfigureAddSharePointEntries (ConfigureNode, 207) : Configuring SharePoint application entries
    SharepointRootUri = http://ets-webapp
    SharepointAdminUri = http://ets-webapp:17012/
    DefaultSharePointPath = sites
    ApplicationTierUri = http://ets-webapp:8080/tfs
    ApplicationTierServiceAccount = NT AUTHORITY\NETWORK SERVICE
    - ConfigureAddAccountToLocalWss (ConfigureNode, 800) : Add account to WSS farm admin group
    Account = NT AUTHORITY\NETWORK SERVICE
    AdminUrl = http://ets-webapp:17012/
    UseRetainedSettings = False
    [Info   @12:19:36.260] 
    [Info   @12:19:36.260] +-+-+-+-+-| Running root: root |+-+-+-+-+-
    [Info   @12:19:36.260] 
    [Info   @12:19:36.260] +-+-+-+-+-| root |+-+-+-+-+-
    [Info   @12:19:36.260] Starting Node: CONTAINER
    [Info   @12:19:36.261] NodePath : Container
    [Info   @12:19:36.261] Node returned: Ignore
    [Info   @12:19:36.261] Completed root: Ignore
    [Info   @12:19:36.261] -----------------------------------------------------
    [Info   @12:19:36.261] 
    [Info   @12:19:36.261] +-+-+-+-+-| Running Provisioning SharePoint: Provisioning SharePoint |+-+-+-+-+-
    [Info   @12:19:36.261] 
    [Info   @12:19:36.261] +-+-+-+-+-| Provisioning SharePoint |+-+-+-+-+-
    [Info   @12:19:36.261] Starting Node: CONDITION
    [Info   @12:19:36.261] NodePath : Container/Conditional
    [Info   @12:19:36.261] Node returned: Ignore
    [Info   @12:19:36.261] Completed Provisioning SharePoint: Ignore
    [Info   @12:19:36.261] -----------------------------------------------------
    [Info   @12:19:36.262] 
    [Info   @12:19:36.262] +-+-+-+-+-| Running Configure SharePoint: Configure SharePoint |+-+-+-+-+-
    [Info   @12:19:36.262] 
    [Info   @12:19:36.262] +-+-+-+-+-| Configure SharePoint |+-+-+-+-+-
    [Info   @12:19:36.262] Starting Node: CONTAINER
    [Info   @12:19:36.262] NodePath : Container/Conditional/Progress
    [Info   @12:19:36.262] Node returned: Ignore
    [Info   @12:19:36.262] Completed Configure SharePoint: Ignore
    [Info   @12:19:36.262] -----------------------------------------------------
    [Info   @12:19:36.262] 
    [Info   @12:19:36.262] +-+-+-+-+-| Running ConfigSPProvision: Configuring the SharePoint Products |+-+-+-+-+-
    [Info   @12:19:36.263] 
    [Info   @12:19:36.263] +-+-+-+-+-| Configuring the SharePoint Products |+-+-+-+-+-
    [Info   @12:19:36.263] Starting Node: CSPPROVISION
    [Info   @12:19:36.263] NodePath : Container/Conditional/Progress/CSPPROVISION
    [Info   @12:19:36.263] 
    [Info   @12:19:36.263] +-+-+-+-+-| SharepointProvision::ConfigureDatabase |+-+-+-+-+-
    [Info   @12:19:36.263] Configuring the SharePoint Products database ...
    [Info   @12:19:36.263] SharePoint Products::ConfigureDatabase
    [Info   @12:19:36.263] GrantLogOnAsAService is called. User name: tfsuser [Info   @12:19:36.269] Checking if Authenticated Users group is a member of Users group.
    [Info   @12:19:36.272] sid = S-1-5-4
    [Info   @12:19:36.272] sid = S-1-5-11
    [Info   @12:19:36.272] sid = S-1-5-21-1481031050-1694664162-2121907377-513
    [Info   @12:19:36.272] sid = S-1-5-21-1529747324-2324938602-2105273467-1015
    [Info   @12:19:36.272] Authenticated Users group is a member of Users group.
    [Info   @12:19:36.300] C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\bin\stsadm.exe
    [Info   @12:19:36.300] -o setconfigdb
    [Info   @12:19:36.300] -databaseserver ETS-WEBAPP
    [Info   @12:19:36.300] -farmuser domain\tfsuser
    [Info   @12:19:36.300] -farmpassword ********
    [Info   @12:19:36.300] Process starting: fileName=C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\bin\stsadm.exe arguments=-o setconfigdb -databaseserver ETS-WEBAPP -farmuser domain\tfsuser -farmpassword ****************
    [Info   @12:20:04.869] Process finished: fileName=C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\bin\stsadm.exe arguments=-o setconfigdb -databaseserver ETS-WEBAPP -farmuser domain\tfsuser -farmpassword **************** exitCode=-1
    in 28566 ms
    [Info   @12:20:04.869] 
    [Info   @12:20:04.869] WARNING: SharePoint no longer customizes Integrated Authentication security settings. This Web application may be using Kerberos, which can require manual configuration. See "http://support.microsoft.com/?id=832769" for
    more information.
    [Info   @12:20:04.869] 
    [Error  @12:20:04.869] An error occurred while getting information about the user tfsuser at server telenor.com.pk: Access is denied
    [Error  @12:20:04.869] 
    [Info   @12:20:04.869] ReturnCode=-1
    [Info   @12:20:04.874] Node returned: Error
    [Error  @12:20:04.874] TF255424: An error occurred while installing SharePoint Products. For more information, open Event Viewer and review the application log. You might need to manually install Windows SharePoint Foundation 2010. 
    [Info   @12:20:04.874] Completed ConfigSPProvision: Error
    [Info   @12:20:04.874] -----------------------------------------------------
    [Info   @12:20:04.880] Execution results:
    [Info   @12:20:04.880] Overall result: Failure
    [Info   @12:20:04.880] Nodes completed: 1
    [Info   @12:20:04.880] Nodes succeeded: 0
    [Info   @12:20:04.880] Nodes skipped: 0
    [Info   @12:20:04.880] Nodes with errors: 1
    [Info   @12:20:04.880] Nodes with warnings: 0
    [Info   @12:20:04.880] Number of error messages: 1
    [Info   @12:20:04.880] Number of warning messages: 0
    [Info   @12:20:04.880] Number of info messages: 0
    [Error  @12:20:04.881] Activity failed.
    [Info   @12:20:04.881] Configuration failed. Unconfiguring.
    [Info   @12:20:04.885] Setting the IsConfigured flag for feature SharePointExtensions to False.
    awias

    looks like here is the your problem "An error occurred while getting information about the user moss.service
    at server telenor.com.pk: Access is denied"
    try to add the user into the managed account via powershell. the user you trying to configure it.
    or change the user to some body else here is culprit account "telenorpk\moss.service"
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Error occurred while installing the application: Invalid device specified

    Error occurred while installing the application: Invalid <device> specified i am getting this error on windows. How to solve that.

    Hi there.
    I know this is an old post, but I fell here having this same problem for some weeks now, and i just figured my issue. Hope it help others:
    My iPhone is connecting automatically with my itunes on computer. Not really sure what type of connection or wireless sync, but the fact is that it IS connecting.
    For some weird reason it gets Flash Builder crazy and it cannot find the right device anymore. Even when I get my iPhone connected by cable, it says that it found the device, but doesn`t publish to it. The Flash Builder says that it was published, but nothing gets installed, and the debugger cannot connect.
    MY SOLUTION (for now): Turn off the phone wi-fi, so it gets out of my home network. works like a charm and I finally can test on my device again.
    Really hope this helps.

  • Can't Install. An error occurred while installing Adobe AIR

    I can't install Adobe AIR. I'm getting the infamous error:
    "An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator."
    I'm the administrator of the computer.
    I'm running Windows 7 Ultimate 32-bit.
    I've tried the right-click-run-as-administrator solution and I'm getting the same error.
    I've read Troubleshoot AIR installation | Windows and none of the solutions worked.
    I'm installing the latest AIR version (I've tried older versions too)
    I've tried Microsoft Install and Uninstall Fix It and AIR doesn't appear on the list of programs.
    Here is my install log:
    [2012-04-13:11:31:20] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2012-04-13:11:31:20] Commandline is:
    [2012-04-13:11:31:20] No installed runtime detected
    [2012-04-13:11:31:42] Relaunching with elevation
    [2012-04-13:11:31:42] Launching subprocess with commandline c:\users\mmazza\appdata\local\temp\aira62d.tmp\adobe air installer.exe -ei
    [2012-04-13:11:31:42] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2012-04-13:11:31:42] Commandline is: -stdio \\.\pipe\AIR_5604_0 -ei
    [2012-04-13:11:31:42] No installed runtime detected
    [2012-04-13:11:31:43] Starting silent runtime install. Installing runtime version 3.2.0.2070
    [2012-04-13:11:31:43] Installing msi at c:\users\mmazza\appdata\local\temp\aira62d.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    [2012-04-13:11:31:45] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2012-04-13:11:31:45] Rolling back install of c:\users\mmazza\appdata\local\temp\aira62d.tmp\setup.msi
    [2012-04-13:11:31:45] Rollback complete
    [2012-04-13:11:31:45] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2012-04-13:11:31:45] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2012-04-13:11:31:45] Runtime Installer end with exit code 7
    [2012-04-13:11:31:47] Runtime Installer end with exit code 7
    Hope someone can help. Thanks.

    Chris, thanks for your help. Here's the log:
    === Logging started: 4/16/2012  11:16:05 ===
    Action start 11:16:05: INSTALL.
    Action start 11:16:05: FindRelatedProducts.
    Action ended 11:16:05: FindRelatedProducts. Return value 1.
    Action start 11:16:05: ValidateProductID.
    Action ended 11:16:05: ValidateProductID. Return value 1.
    Action start 11:16:05: SetSHAREDADDINFOLDER.
    Action ended 11:16:05: SetSHAREDADDINFOLDER. Return value 1.
    Action start 11:16:05: CostInitialize.
    Action ended 11:16:05: CostInitialize. Return value 1.
    Action start 11:16:05: FileCost.
    Action ended 11:16:05: FileCost. Return value 1.
    Action start 11:16:05: CostFinalize.
    Action ended 11:16:06: CostFinalize. Return value 1.
    Action start 11:16:06: MigrateFeatureStates.
    Action ended 11:16:06: MigrateFeatureStates. Return value 0.
    Action start 11:16:06: InstallValidate.
    Action ended 11:16:06: InstallValidate. Return value 1.
    Action start 11:16:06: SetARPINSTALLLOCATION.
    Action ended 11:16:06: SetARPINSTALLLOCATION. Return value 1.
    Action start 11:16:06: InstallInitialize.
    Action ended 11:16:07: InstallInitialize. Return value 1.
    Action start 11:16:07: ProcessComponents.
    Action ended 11:16:07: ProcessComponents. Return value 1.
    Action start 11:16:07: UnpublishFeatures.
    Action ended 11:16:07: UnpublishFeatures. Return value 1.
    Action start 11:16:07: RemoveRegistryValues.
    Action ended 11:16:07: RemoveRegistryValues. Return value 1.
    Action start 11:16:07: RemoveDuplicateFiles.
    Action ended 11:16:07: RemoveDuplicateFiles. Return value 1.
    Action start 11:16:07: RemoveFiles.
    Action ended 11:16:07: RemoveFiles. Return value 0.
    Action start 11:16:07: InstallFiles.
    Action ended 11:16:07: InstallFiles. Return value 1.
    Action start 11:16:07: DuplicateFiles.
    Action ended 11:16:07: DuplicateFiles. Return value 1.
    Action start 11:16:07: WriteRegistryValues.
    Action ended 11:16:07: WriteRegistryValues. Return value 1.
    Action start 11:16:07: RegisterUser.
    Action ended 11:16:07: RegisterUser. Return value 1.
    Action start 11:16:07: RegisterProduct.
    Action ended 11:16:07: RegisterProduct. Return value 1.
    Action start 11:16:07: PublishFeatures.
    Action ended 11:16:07: PublishFeatures. Return value 1.
    Action start 11:16:07: PublishProduct.
    Action ended 11:16:07: PublishProduct. Return value 1.
    Action start 11:16:07: InstallExecute.
    MSI (s) (EC:04) [11:16:09:069]: Product: Adobe AIR -- Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.air\OpenWithProgids.  System error 5.  Verify that you have sufficient access to that key, or contact your support personnel.
    Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.air\OpenWithProgids.  System error 5.  Verify that you have sufficient access to that key, or contact your support personnel.
    Action ended 11:16:09: InstallExecute. Return value 3.
    Action ended 11:16:10: INSTALL. Return value 3.
    Property(S): ARPINSTALLLOCATION = c:\Program Files\Common Files\Adobe AIR\
    Property(S): SHAREDADDINFOLDER = c:\Program Files\Adobe\Flash Player\AddIns\airappinstaller\
    Property(S): UpgradeCode = {8DA920D5-C41C-42E0-BF31-87BA49984EE4}
    Property(S): UC8DA920D5C41C42E0BF3187BA49984EE4 = {FDB3B167-F4FA-461D-976F-286304A57B2A}
    Property(S): Resources = c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\
    Property(S): Version = c:\Program Files\Common Files\Adobe AIR\Versions\1.0\
    Property(S): Versions = c:\Program Files\Common Files\Adobe AIR\Versions\
    Property(S): AIR = c:\Program Files\Common Files\Adobe AIR\
    Property(S): CommonFilesFolder = c:\Program Files\Common Files\
    Property(S): TARGETDIR = c:\
    Property(S): SourceDir = c:\users\mmazza\appdata\local\temp\air5438.tmp\
    Property(S): Manufacturer = Adobe Systems Incorporated
    Property(S): ProductCode = {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    Property(S): ProductLanguage = 1033
    Property(S): ProductName = Adobe AIR
    Property(S): ProductVersion = 3.2.0.2070
    Property(S): REINSTALLMODE = amus
    Property(S): ARPSYSTEMCOMPONENT = yes
    Property(S): REBOOT = Suppress
    Property(S): ALLUSERS = 1
    Property(S): SecureCustomProperties = ARPSYSTEMCOMPONENT;REINSTALLMODE;SHAREDADDINFOLDER;UC8DA920D5C41C42E0BF3187BA49984EE4
    Property(S): MsiLogFileLocation = C:\Users\mmazza\AppData\Local\Temp\MSI46b03.LOG
    Property(S): PackageCode = {496CC99A-E905-4C30-B3F0-14CB137CACAC}
    Property(S): ProductState = -1
    Property(S): PackagecodeChanging = 1
    Property(S): CURRENTDIRECTORY = C:\Users\mmazza\Downloads
    Property(S): CLIENTUILEVEL = 3
    Property(S): MSICLIENTUSESEXTERNALUI = 1
    Property(S): CLIENTPROCESSID = 1156
    Property(S): VersionDatabase = 200
    Property(S): VersionMsi = 5.00
    Property(S): VersionNT = 601
    Property(S): WindowsBuild = 7600
    Property(S): ServicePackLevel = 0
    Property(S): ServicePackLevelMinor = 0
    Property(S): MsiNTProductType = 1
    Property(S): WindowsFolder = c:\Windows\
    Property(S): WindowsVolume = c:\
    Property(S): SystemFolder = C:\Windows\system32\
    Property(S): System16Folder = C:\Windows\system\
    Property(S): RemoteAdminTS = 1
    Property(S): TempFolder = C:\Users\mmazza\AppData\Local\Temp\
    Property(S): ProgramFilesFolder = C:\Program Files\
    Property(S): AppDataFolder = C:\Users\mmazza\AppData\Roaming\
    Property(S): FavoritesFolder = C:\Users\mmazza\Favorites\
    Property(S): NetHoodFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
    Property(S): PersonalFolder = C:\Users\mmazza\Documents\
    Property(S): PrintHoodFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
    Property(S): RecentFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\Recent\
    Property(S): SendToFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\SendTo\
    Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
    Property(S): CommonAppDataFolder = C:\ProgramData\
    Property(S): LocalAppDataFolder = C:\Users\mmazza\AppData\Local\
    Property(S): MyPicturesFolder = C:\Users\mmazza\Pictures\
    Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
    Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
    Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
    Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
    Property(S): DesktopFolder = C:\Users\Public\Desktop\
    Property(S): FontsFolder = C:\Windows\Fonts\
    Property(S): GPTSupport = 1
    Property(S): OLEAdvtSupport = 1
    Property(S): ShellAdvtSupport = 1
    Property(S): Intel = 6
    Property(S): PhysicalMemory = 3325
    Property(S): VirtualMemory = 4304
    Property(S): AdminUser = 1
    Property(S): MsiTrueAdminUser = 1
    Property(S): LogonUser = mmazza
    Property(S): UserSID = S-1-5-21-823518204-1563985344-842925246-12804
    Property(S): UserLanguageID = 1033
    Property(S): ComputerName = RGPROWS1015
    Property(S): SystemLanguageID = 1033
    Property(S): ScreenX = 1024
    Property(S): ScreenY = 768
    Property(S): CaptionHeight = 22
    Property(S): BorderTop = 1
    Property(S): BorderSide = 1
    Property(S): TextHeight = 16
    Property(S): TextInternalLeading = 3
    Property(S): ColorBits = 32
    Property(S): TTCSupport = 1
    Property(S): Time = 11:16:10
    Property(S): Date = 4/16/2012
    Property(S): MsiNetAssemblySupport = 4.0.30319.1
    Property(S): MsiWin32AssemblySupport = 6.1.7600.16385
    Property(S): RedirectedDllSupport = 2
    Property(S): MsiRunningElevated = 1
    Property(S): Privileged = 1
    Property(S): USERNAME = d
    Property(S): DATABASE = c:\Windows\Installer\446fe3.msi
    Property(S): OriginalDatabase = c:\users\mmazza\appdata\local\temp\air5438.tmp\setup.msi
    Property(S): UILevel = 2
    Property(S): ACTION = INSTALL
    Property(S): ROOTDRIVE = c:\
    Property(S): CostingComplete = 1
    Property(S): OutOfDiskSpace = 0
    Property(S): OutOfNoRbDiskSpace = 0
    Property(S): PrimaryVolumeSpaceAvailable = 0
    Property(S): PrimaryVolumeSpaceRequired = 0
    Property(S): PrimaryVolumeSpaceRemaining = 0
    Property(S): INSTALLLEVEL = 1
    Property(S): SOURCEDIR = c:\users\mmazza\appdata\local\temp\air5438.tmp\
    Property(S): SourcedirProduct = {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    Property(S): ProductToBeRegistered = 1
    MSI (s) (EC:04) [11:16:10:707]: Product: Adobe AIR -- Installation failed.
    MSI (s) (EC:04) [11:16:10:720]: Windows Installer installed the product. Product Name: Adobe AIR. Product Version: 3.2.0.2070. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
    === Logging stopped: 4/16/2012  11:16:10 ===
    I've tried to delete the HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.air\OpenWithProgids key, but I got the message "Cannot delete. Error while deleting key"

  • Fb 4.7 air sdk 15.0.0.349 Error occurred while installing the application

    Hi
    Im using fb 4.7 air sdk 15.0.0.349 with Macosx 10.9.4, xcode 6.1 (ios simulator 8.1) and i keep getting the following response when debugging with ios simulator:
    Error occurred while installing the application:
    Session did end with error (null)
    Can you help?  Is this a bug being fixed yet?
    Thanks.
    zed0784

    Sorry i was refering to my other post. I am on FB 4.7, AIR 15 SDK 15.0.0.356, Xcode Version 6.1 (6A1052d) with the same problem on Mavericks on my MacPro and Yosemite on my MacBook Pro. My App (which uses Feathers and Starling) didnt work at all and even got rejected for Testflight testing because is was crashing immediately on iOS 8.1. I found out that this was related to the new compiler so "-useLegacyAOT yes " solved that problem.
    But the problem that i cannot test in iOS simulator at all still persists. (Session did end with error (null))

Maybe you are looking for