Please help, someone please, this is a big issue
2nd g-thouch owner.................
ok, well I have been downlowding my songs, right, for about a week now. But i dont use itunes to get my songs,I use MP3 Rocket to get all my songs and then I put the songs that i got onto the itunes. well I did that, plus I put artwork on it, so it has a pic for the ipod touch
well now this week, when I put them on itunes and downlowed, and I went to find the artwork tab, it dident show the tab that i would be putting the artwork in,then when i try to find it, it seems like its not there any more. but I did with the rest of them that i have before, so now like 15 of my songs dont have artwork on it because it doesent show a artwork tab when I look for it, so now i dont want to keep doing this with my rest of my songs, because my ipod touch is basicly ment to have a artwork on it , because thats the most thing it can stand out
please help, i like to have someone that knows to fix this problem and knows what there doing please,
please help, i dont want this happinning with the rest of them.
please and ty
if you have any Q's regarding this Question please dont hesitate to ask, but if you know how to fix it, please please send me a post
If these are WAV files, there is no artwork tab because WAV files do not have artwork tags.
Similar Messages
-
Can somebody please help me with this? Security code issue; very small code
Hi All, Iam a Unix admin and trying to learn Java/weblogic. I have a JSP and iam trying to run on my weblogic 81 Service Pack version 3.
My following code failed to work and giving me some security exceptions. Then in my weblogic console i saw
Domain Wide Security Settings > Anonymous Admin Lookup Enabled
The above checkbox is disabled. When i enabled, it worked. I talked to my company "Security" folks and they do not allow this checkbox to be enabled. they are saying fix your code problem......
if somebody can please let me know what a probable fix would, that be great and very helpful.
try{
Environment env = new Environment();
javax.naming.InitialContext ic = new InitialContext();
MBeanHome home = (MBeanHome) ic.lookup(MBeanHome.LOCAL_JNDI_NAME);
DomainMBean dom = home.getActiveDomain();
Set s = home.getMBeansByType("ServerRuntime");
ServerRuntimeMBean srmb = (ServerRuntimeMBean) s.iterator().next();
WebLogicObjectName on = new WebLogicObjectName(home.getDomainName()+":Location="+srmb.getName()+",Name="+srmb.getName()+",Type=ServerConfig");
//WebLogicObjectName on = new WebLogicObjectName(Name="+srmb.getName()+",Type="ServerConfig",Domain="+home.getDomainName()+",Location="+srmb.getName()+");
ServerMBean server = (ServerMBean) home.getMBean(on);
ClusterMBean cluster = null;
if( server != null)
cluster = server.getCluster();did i asked such a dumb question? ... :)Well, yes, sort of. The problem description "My following code failed to work and giving me some security exceptions" doesn't have nearly enough details. Such as, what exceptions, what is it supposed to do, what did it do instead, that sort of thing.
-
hello,
i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed
-
My safari keeps closing unexpectedly and when it does it tells me that it quite while using the .GameHouseBeachParty.so plugin. I have no idea what this means! Can someone please help me fix this?
You have the Flashback trojan.
Check out the replies in this thread for what to do;
https://discussions.apple.com/message/18114958#18114958 -
Hi, I'm stuck at step 9. I don't see my external harddrive when I want to save the DMG backup file. Can you please help me with this? I'm desperate to make this backup! Big thanx in advance!
http://support.apple.com/kb/HT1553Repair permissions and restart your computer. If this does not work, zap the pram. You should now see your external hard drive.
-
When attempting to start iTunes, I get the following: "The iTunes library file cannot be saved. An unknown error occurred (-50)." Can someone please help me get this fixed?
Same problem here since latest update. As usual poor support from Apple with no answer or fix for this bug.
-
My husband and I both have iPhones on the same account. When he did his update yesterday, he chose both his number and my number during set up. Now he is getting my messages, too. Can someone please help me fix this?
What do you mean he chose his and your number during setup. Chose them for what? Is you number showing up in the Settings>Messages>"You can be reached by imessage at" section? If it is he needs to remove it.
Cheers,
GB -
ever since i put a child lock on my Mac its never been the same .. now i cant even open my yahoo mail without it wanting me to reinstall this, can someone please help me work this out
What "child lock" are you talking about?
Do you mean you set up a Managed account (Parental Controls), or some other software?
For Parental Controls, select the account in Users & Groups and uncheck the "Enable parental controls" checkbox. -
Hi, I need someone to help me change the login screen. The computer I have is a macbook, its second hand and probably around 3-4 years old. The previous owner had the login screen has a lego or something. Could someone please help me change this??
computerilliterate52 wrote:
hi all, i hope someone is very computer litterate about java that is i have a dell 2400 pc windows xp 2, well since msn isnt downloading anymore java updates we all have to download a compatible one to our computer i use explorer and i can play www.iwin.com online games, yet when i go on to the msn browswer it wont load the games all i see is it just trying to load and load nothing said and nothing done. what could be wrong it works on ie and not msn browser? i have zone alarm, i have avg spyware tester and spyblaster, but i thought it may of kept me from downloading all this yet it worked on IE please help and i dont have flash player either it wont seem to work any and i mean any help is welcome.i tried to change the browser settings and did all that stuff i am on broadband DSL and they dont seem to know they say that isnt there job its msn's so i asked them and they said no it is quest broadband since i am with them i just get the run around i have IE 6.0 ihave java plug in 1.4.2. o3 yet it says not verified, i have java 1.6.o o1 i have java plugin 1.6.0 01 i have that twice ? dont know why. and java envirinmemet i have the right stuff cuz like i said it plays or works on explorer not msn browserer bar. i see no picture's in center of the page as it tries to load it is a blank page any help thank you i have been trying going on 3 weeks now thanksI agree with the other posters; try Firefox. It sounds like a bit of a mess and what you may need is an onsite PC tech to do some maintenance on your PC.
Also, learning to properly use punctuation (particularly periods) might not be a bad idea. As it is, your post was very hard to read.
Good luck! -
I have buy 4s it's unlocked and its working ok with different carriers in Bahrain, but in Pakistan I try to use different carriers's sims but its showing sim is not valid , not compatible? any one please help me out this?
Try restoring the iPhone to factory settings. If you are having difficult restoring, put the iPhone into Recovery Mode and see if that then works:
http://support.apple.com/kb/ht1808
If not, or if a restore to factory settings does not fix the problem, then your iPhone may have a hardware problem. You can only get the iPhone serviced by Apple in Canada, so you will have to take the iPhone there or send it to someone you know in Canada who can get the iPhone serviced and send it back to you. The only option for getting service in Pakistan would be to pay some unauthorized repair shop to attempt a repair, after which Apple will no longer provide any service even in Canada.
Regards. -
Please help me with this error: "Apple application support was not found... Error 2"
Can anyone please help me with this error: "Apple application support was not found... Error 2"
I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
"Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
Thank youiTunes "Apple Application Support is required... Error 2" and possible fix.
I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
If it helps you please like this so others can find it. -
Hi Everyone...Please help me with this query...!
Please Help me with this doubt as I am unable to understand the logic...behind this code. It's a begineer level code but I need to understand the logic so that I am able to grasp knowledge. Thank you all for being supportive. Please help me.
//Assume class Demo is inherited from class SuperDemo...in other words class Demo extends SuperDemo
//Volume is a method declared in SuperDemo which returns an integer value
//weight is an integer vairable declared in the subclass which is Demo
class Example
public static void main(String qw[])
Demo ob1=new Demo(3,5,7,9);
//Calling Constructor of Demo which takes in 4 int parameters
SuperDemo ob2=new SuperDemo();
int vol;
vol=ob1.volume();
System.out.println("Volume of ob1 is " + vol);
System.out.println("Weight of ob1 is " + ob1.weight);
System.out.println();
ob2=ob1;
}Can someone please make me understand --- how is this possible and why !
If the above statement is valid then why not this one "System.out.println(ob2.weight);"
Thanks Thanks Thanks!u see the line wherein I am referencing the objectof
a subclass to the superclass...right? then why we
can't do System.out.println(ob2.weight)?You need to distinguish two things:
- the type of the object, which determines with the
object can do
- the type of the reference to the object, which
determines what you see that you can do
Both don't necessarily have to match. When you use a
SuperDemo reference (obj2) to access a Demo instance
(obj1), for all you know, the instance behind obj2 is
of type SuperDemo. That it's in reality of type Demo
is unknown to you. And usually, you don't care -
that's what polymorphism is about.
So you have a reference obj2 of type SuperDemo.
SuperDemo objects don't have weight, so you don't see
it - even though it is there.So from ur explanation wat I understand is - Even though u reference a subclass object to a superclass, u will only be able to access the members which are declared in the superclass thru the same...right
? -
Well, i was on my laptop now and all of a sudden a pop up message appeared and said "your download is complete" so i went to go check it out and it was 'MacProtector'. i cant delete it and it keeps opening unwanted web pages, please help me sort this out someone?
Refer to: http://cantalktech.com/2011/05/08/mac-protector/.
-
Please help me with this SQL query
I am practicing SQL queries and have come across one involving fetching data from 3 different tables.
The three tables are as below
<pre>
Country
location_id country
loc1 Spain
loc2 England
loc3 Spain
loc4 USA
loc5 Italy
loc6 USA
loc7 USA
</pre>
<pre>
User
user_id location_id
u1 loc1
u2 loc1
u3 loc2
u4 loc2
u5 loc1
u6 loc3
</pre>
<pre>
Post
post_id user_id
p1 u1
p2 u1
p3 u2
p4 u3
p5 u1
p6 u2
</pre>
I am trying to write an SQL query - for each country of users, display the average number of posts
I understand the logic behind this that we first need to group together all the locations and then the users belonging to one country and then find the average of their posts.
But, i'm having a difficulty in putting this in SQL form. Could someone please help me with this query.
Thanks.select
country.country,
count(*) Totalpostspercountry,
count(distinct post.user_id) Totaldistincuserspercountry,
count(*)/count(distinct post.user_id) Avgpostsperuserbycountry
from
country, muser, post
where country.location_id = muser.location_id
and muser.user_id = post.user_id
group by country.country
The output is like this for your sample data - hope this is what you were looking for :)
COUNTRY,TOTALPOSTSPERCOUNTRY,TOTALDISTINCUSERSPERCOUNTRY,AVGPOSTSPERUSERBYCOUNTRY
England,1,1,1,
Spain,5,2,2.5, -
Just updated to iCloud, but I can't find the 'purchased' list on the iTunes store on my iPhone. There's no button for it on the toolbar or under the 'more' option. Want to play/download my puchased music via iCloud on my iPhone.... Help someone please?!
Hi again Limons,
just got your last reply per mail, re: 'presently only available in the USA.'
Unfortunately, you're right. Just found this article: http://www.digitalmusicnews.com/stories/061011icloud
seem like it's going to be a while before this gets sorted out . . .
Frustrating outcome to my question, but thanks a lot for helping me sort out what the problem was :-)
All the best to you.
Maybe you are looking for
-
I want to run a simple member formula but fix it on only entities that have a certain attribute: "Comp". I have a BSO cube partitioned with an ASO cube with the following member formula: ================================================ In BSO: IF("Re
-
Logic Pro 9.0.2 won't upgrade to 9.1
I've downloaded and tried to upgrade 3 times. The install says all good but it's not. This is crazy or maybe I am. Someone please tell me what I'm doing wrong. As you see I'm not real new to this. I have a version One manual. This is embarrasing. I d
-
Had iTunes on PC/Windows with music on Ipod. Moved to MacBook Pro, but now when I attempt to sync from Ipod to MacBook (and hopefully to Ipad) I get message that Ipod isn't associated and my only option is to delete music on Ipod. HELP.
-
Friends Just wanted to check if there is a bpm 64 bit enterprise version and 32 bit one separate or is there is universal installer which can be used for both 64 and 32 bit? Thanks
-
Because my Acer computer with Vista crashed twice, I changed from Thunderbird to Yahoo mail <[email protected]> (I live in Canada so why the "uk", I do not know). I upgraded Firefox to version 4. For the past week I am told that I must activate my Ja