Please Help stop Texts

Does anyone knoe how to stop texts from 11=801=222=2269 I finally went to a android phone after years of just a simple phone but since have got over 100texts from this number and have not even had the phone 24hours yet ,any help would be great

Hi, shawnmax!
Lets take a look into this for you so you can begin enjoying your new Android device! Did you use Mobile Email on your previous device? If you are still receiving these text, please try to reply with the word STOP to disable these messages. If they persists, please send me (AdamE_VZW) a direct message for further assistance.
Thanks,
AdamE_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Please help- adding text/titles to a clip

I hope someone here can help me!
I seem to have this problem continuously, and have previously worked around it, but it's giving me the s**ts.
Here's the scenario- I want to add text OVER a clip, not on black.
Sounds simple right?
NOPE! I do the preview- yup it's over the clip.
I click add, or drag it, or click the tick in the preview.
As it's rendering- yup, shows it over the clip.
But as soon as it STOPS- all of a sudden it's just text on black.
I've tried using different sorts of titles (from music to subtitles, everything) but the exact same thing happens- preview is fine, as it renders it looks fine, but it ends up being text on black. (Yes, I have 'on black' unchecked).
I also tried adding it in different ways, ie adding at the playhead or dragging it in- no difference.
Am I missing something vitally obvious here? How can I get my text OVER the clip?

Hi
a. to add text - the text tool has to know where. Just placing playhead will not
work. The text tools orients after clip cuts. You need to do a cut where the text
is supposed to start.
b. I guess that deleting pref file might get iMovie to behave.
Not knowing the origin to Your problem - General approach when in trouble is as follows:
Many possible origins. Most common:
• Free space on internal (start-up) hard disc if it is less than 10Gb should rather have 25Gb
• Hard disc is untidy: Repair Permissions, Repair Hard disc (Apple Disc Util tool)
• Delete iMovie pref file - or rather start a new user/account - log into this and re-try
• Third party plug-ins that doesn't work OK
• Program miss-match: iMovie 5.0.2, Mac OS X.4.11 AND QuickTime 7.4 - is OK
iMovie pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named: com.apple.iMovie.plist
While iMovie is NOT RUNNING - move this file out to desk-top.
Now restart iMovie.
Yours Bengt W

Please help with text boxes

Can somebody help me wit hmy problem. I have a fom with many tables in it, some cells of the table are text boxes or at least they were when I developed it. Now I need to edit some of the cells and for some reason I cannot do it as the cell is not a text box but became (untitled<draw>) I cannot change its type back to text. Can some one advise what to do whitouh retyping text again in the new cell.
Many thanks in advance

You are welcome!
I have a preference for Javascript (just get in the syntax zone) and use it for most things (except dates).
As you know:
this = current object
rawValue = accesses the value of object
From an Excel point of view FormCalc is similar and has inbuilt function like sum(), Max(), etc. Syntax is $ for current object and you don't need the rawValue. This is very handy when summing a column in a repeating table. Also FormCalc is excellent for working with time and dates. (not that you can't work around in Javascript, but it is heavier).
Adobe have a very good reference for FormCalc at http://www.adobe.com/go/learn_lc_formCalc_82 and I would recommend that to you. I think it comes from the LC help file, but is easier to use.
From a performance point of view, you can either have FormCalc in the calculate event of an object, which looks back at other fields (this will fire each time one of these fields changes). Alternatively you can have the FormCalc in the exit event of a field, which pushes a calculation/value forward to another object.
Functions are handy if you have a script that you are using several times in a form. You write the script in a "script variable" and then call it in the objects events. HOWEVER, script variables are available in Javascript only.
One last thing is that if you have a constant (like VAT), then rather than including "* 0.21" in all of your calculations, use a global variable in the Form / Properties / Variables tab. currentVat = 0.21. Then in your calculations would be "* currentVat.value". If the VAT rate changes then you only have to change it in one location.
In summary FormCalc is more akin to Excel; just watch the syntax.
Good luck,
Niall

Please help with text

I have the newest software, im seriously irritated with the fill in text. Everyday I use the word shiit, minus the extra I. and it allways wants to put the words shut or shot. I dont think ive EVER even used those words. this has gone on ever since I updated months ago. Is there any way to stop it from doing this? it drives me nuts!
Message was edited by: msonia03

Apparently, the dictionary has sh*t-for-brains..
Try this (it looks insane, but works).
Settings > General > Keyboard > International Keyboards > Add New Keyboard > select Japanese Ten Key and add.
Back out of Settings and go back to General > Keyboard > (you will now see a new choice) Edit User Dictionary > "+" > Word > type in that word > Save
You now will be able to use that word using the English keyboard without correction. Why this hidden feature requires enabling a Japanese dictionary (and only Japanese) is a question only Apple can answer...
Message was edited by: modular747

Please Help with text parsing problem

Hello,
I have the following text in a file (cut and pasted from VI)
12 15 03 12 15 03 81 5 80053 1 1,2,3 $23.00 1 ^M
12 15 03 12 15 03 81 5 84550 1 1,2,3 $15.00 1 ^M
12 15 03 12 15 03 81 5 84100 1 1,2,3 $15.00 1 ^M
12 15 03 12 15 03 81 5 83615 1 1,2,3 $15.00 1 ^M
12 15 03 12 15 03 81 5 82977 1 1,2,3 $15.00 1 ^M
12 15 03 12 15 03 81 5 80061 1 1,2,3 $44.00 1 ^M
12 15 03 12 15 03 81 5 83721 1 1,2,3 $15.00 1 ^M
12 15 03 12 15 03 81 5 84439 1 1,2,3 $44.00 1 ^M
12 15 03 12 15 03 81 5 84443 1 1,2,3 $40.00 1 ^M
12 15 03 12 15 03 81 5 85025 1 1,2,3 $26.00 1 ^M
12 15 03 12 15 03 81 5 85008 1 1,2,3 $5.00 1 ^M
this method reads the text from a file and stores it in a ArrayList
    public ArrayList readInData(){
        File claimFile = new File(fullClaimPath);
        ArrayList returnDataAL = new ArrayList();
        if(!claimFile.exists()){
            System.out.println("Error: claim data - File Not Found");
            System.exit(1);
        try{
            BufferedReader br = new BufferedReader(new FileReader(claimFile));
            String s;
            while ((s = br.readLine()) != null){
                     System.out.println(s + " HHHH");
                    returnDataAL.add(s);
        }catch(Exception e){ System.out.println(e);}
        return returnDataAL;
    }//close loadFile()if i print the lines from above ... from the arraylist ... here is waht i get ...
2 15 03 12 15 03 81 5 80053 1 1,2,3 $23.00 1 HHHH
HHHH
12 15 03 12 15 03 81 5 84550 1 1,2,3 $15.00 1 HHHH
HHHH
12 15 03 12 15 03 81 5 84100 1 1,2,3 $15.00 1 HHHH
HHHH
12 15 03 12 15 03 81 5 83615 1 1,2,3 $15.00 1 HHHH
HHHH
12 15 03 12 15 03 81 5 82977 1 1,2,3 $15.00 1 HHHH
HHHH
12 15 03 12 15 03 81 5 80061 1 1,2,3 $44.00 1 HHHH
HHHH
12 15 03 12 15 03 81 5 83721 1 1,2,3 $15.00 1 HHHH
HHHH
12 15 03 12 15 03 81 5 84439 1 1,2,3 $44.00 1 HHHH
HHHH
12 15 03 12 15 03 81 5 84443 1 1,2,3 $40.00 1 HHHH
HHHH
12 15 03 12 15 03 81 5 85025 1 1,2,3 $26.00 1 HHHH
HHHH
12 15 03 12 15 03 81 5 85008 1 1,2,3 $5.00 1 HHHH
HHHH
I see the ^M on the end of the lines ... but i dont understand why im getting the blank lines
in between each entry ... I printed "HHHH" just to help with debugging ... anyone have any ideas why i am getting the extra blank lines?
thanks,
jd

maybe its a FileReader deal.. Im not sure, maybe try using InputStreams. This code works for me (it reads from data.txt), give it a try and see if it works:
import java.io.*;
public class Example {
     public Example() throws IOException {
          BufferedReader b = new BufferedReader(new InputStreamReader(new FileInputStream("data.txt")));
          String s = "";
          while ((s = b.readLine()) != null) {
               System.out.println(s);
          b.close();
     public static void main(String[] args) {
          try {
               new Example();
          catch (IOException e) {
               e.printStackTrace();
}

Please help. Text fields launch email for XML data

Let me start by saying I have only been using LiveCycle for two days. I did buy a book and have exhaustuvley searched for a solution....with that said....
After completing almost the entire form, somehow or other I managed to make all the text fields but one initiate email of xml data as soon as you try to type in them in PDF preview or reader or pro.
I added a new text field for test and it does NOT do the same thing. I can't for the life of me figure out how to turn this off.
Issue:
When checking pdf preview, if I click inside a text field to type, it stops the preview and launches an email window with a blank XML file. It does the same thing if I open the file in Reader or Pro.
Solution I am looking for:
My form is nearly complete and i would hate to have to start all over. Basically, I do NOT want the text fields to initiate an email of the form data. I just want the user to be able to type in them as required. In my opinion this should only happen with the "email form" button.
Thanks,
Joe
[email protected]

funny, i found a workaround. after nearly 3 hours and finally posting here, in 15 minutes i found something. I still would like to know
what caused this if anyone knows.....
Fix:
By selecting the text field and changing object type to "Text" then changing it back to "TextField" then save, it now works fine. Of course I had to do it on all 25 fields but way better than redoing all the custom fields i created.

Hi, please help about text and divided/summed cells

Here's my problem: I need that the text in a cell exceeds the right border of it, and this work ok by default.
But when you sum or divide even only a pair of cells, in all the cells of that column the text is forced into the borders.
I need to make a sheet of my guests (I work in a hotel), and the plan is this:
- every column is a day of the calendar
- every room has a row, to text in the Name of the guest and some useful info about the room type, a different color for different travel agency etc. Note that for me is very useful to read easily that info, and so the fact that the text goes in the next cells is a must have.
For the next season I was managing to complete this registry adding a new row for each room, where to put in some numerical info, for doing sums of the people I have in day per day ect.
So I was plannig to divide every cell of the second row in two cells, one for the adults in the room, one for the kids, in order to have the sum.
But when I had the second row and divide the cells the text in the upper row is forced into the cell, and also all the text in that column.
Anyone who can help me?
Thank you in advance,
Stefano

Here's an example, with three different ways to shot the daily total.
Totals for Jan 1 are shown in the three footer rows. Each is independent of the others, and only one would be used in practice.
Form A is a simple sum of the column: =SUM(B)
Form B separates the integer and fractional parts of the total, then recombines them into a text string:
=INT(SUM(B))&"A "&ROUND(100*(SUM(B)-INT(SUM(B))),0)&"C"
Form C does a similar separation, but treats the SUM result as a text string:
=LEFT(SUM(B),LEN(SUM(B))-3)&"A "&RIGHT(SUM(B),2)&"C"
Note that the daily counts are entered as # of adults, decimal, # of children (using two digits)
Formulas will accommodate any number of adults, and up to 99 children (total). For a higher total, revisions to the entry method (one more digit after the decimal—2.001 in place of 2.01) and to Form B (replace 100 with 1000) OR Form C formulas (replace SUM(B),2 with SUM(B),3 ).
Regards,
Barry

Please help--some text not displayed.

I used to be able to use Reader with no issues but suddenly only the basic text is viewable--Title blocks, big fonts, etc are hidden in solid black rectangles--other computers display these pages fine. Not sure if this began before or after I updated to version 9--but I cant download version 8 to see if this is the problem. Support refered me here for answers but II posted a few days ago but my questions was ignored. Please advise. Thx.

Hello Suruchi,
Please follow the steps below.
1) First wrap the 3rd element(some static text) in an individual sub form.
2) Then wrap all these 3 main elements in a parent sub form of type flowed.
3) Now on sub form of 2nd element, write the Javascript in Initialize event as below.
if ( this.parent.text.rawvalue == " " )
this.presence = "hidden";
4) Finally on sub form of 3rd element, write the Javascript in Initialize event as below
if ( this.parent.text.rawvalue == " " )
this.presence = "hidden";
Note: Here text.rawvalue in Javascript is the value of 1st element which is a text field.

Please Help -- Dynamic Text Wont Load :-(

Hi Gang,
I've just written a quick mail form in Flash8Pro/PHP - the
user enters their contact details & a message, and it sends it
off to the specified email address.
The feature works fine for the most part, but there's one
little problem. The dynamic text field that confirms the message
has been sent successfully isn't working properly. I'm using the
following php code to send dynamic text back to the flash document
saying the message has gone through OK:
print "sendresult=Message Sent!";
where sendresult is the name of the dynamic text field's
variable.
The strange thing is that the code works fine if the
sendresult dynamic text field is inserted into the main flash
document. It's only when I put the sendresult field into the movie
clip that holds the flash mail form (including the button with the
loadvariablesnum command), that the text won't update at all. I've
tried:
print "_root.enquirypage.sendresult=Data Sent!"
and
print "enquirypage.sendresult=Data Sent!", but neither of
those make any difference.
Any suggestions? Anybody know what's causing this problem?
Any help would be very very appreciated - I know I could probably
get around this by just setting the visibility of the dynamic text
field on & off when necessary and keeping it in the main flash
doc, but I'll be using this feature quite a lot and I'd really like
a proper/versatile solution. In case it's necessary, the
actionscript that sends the message off to the php is just:
loadVariablesNum ("form.php", 0, "POST");
Many thanks in advance gang,
- Jay

Your code loadVariablesNum ("form.php", 0, "POST"); will load
your variable sendresult in level 0 - the main timeline. If you put
the text field inside a movie clip it expects a local variable in
that movie clip.
Use _level0.sendresult or _root.sendresult as the dynamic
field's variable.
Or, instead of loadVariablesNum you could use loadVariables,
like this:
_root.enquirypage.loadVariables("form.php", "POST");
or, if you make the call from a button inside the movie clip:
this.loadVariables("form.php", "POST");
/uamg

Please help: Stop i Motion problem

Hi,
I'm aware that this is a Motion forum but souldn't find one on here for StopiMotion. If anyone can help me, or point me in the right direction , I'd be very grateful.
My problem is this: Today I used StopiMotion (on an almost brand new Powerbook with at least 10 GIG space) for the first time to make a stopframe animation, for which I normally use Framethief instead.
Foolishly I presumed that, like Framethief, StopiMotion would save each captured frame individually all in a filder in documents. Foolishly I also (was in a pressured situation) didn't pay attention to where it was saving the project to or what it was saving it as. Because I thought it's saving prcess would be the same as framethief at no point did I actually save the project (as in 'save as..'). However, we did preview it successfully at a couple of points during the process. As it needed to render in order to let us preview this leads me to believe that it must have been saved somehow and that the file must exist somewhere.
The problem is that at the end of the process the software froze and I had no choice but to force quit. I then looked in documents for the file but could find nothing that resembled it. What exactly would i be looking for: a Stopimovie movie file or many individual frames? Or would it have been autosaved as a temp file? And where would it save to by default? Does it sound as though my project will have been autosaved?
Thank you for your time and please forgive my stupid questions.
C.

Are you referring to Boinx software iStopMotion?
The reason ask is that that company has a wonderful support line.
http://www.istopmotion.com/
Just post the question and let them respond.
My guess is that these are sequenced graphic files, because unless you set preferences for a movie capture, the files would be sequential.
best wishes
David
go zags

Please, help with text field on form

Hello,
I am creating a form. I have a text field where the person will type a number into text field and I need it to also enter in another text field. For example, the person enters 23 into text field 12, I also need the entry of text field 12 to show up in text field 63. Is this possible? I'm VERY new to this, so a step by step response would be greatly appreciated!
Thank You!!!
Debby

This requires a script as you have to first verify that the denominator is not blank or zero, or you'll get an invalid operation.
Something like this should work as the custom calculation script of your field:
var s1 = this.getField("Text2").valueAsString;
var s2 = this.getField("Text3").valueAsString;
if (s1!="" && s2!="" && Number(s2)!=0) event.value = Number(s1)/Number(s2);
else event.value = "";

Please help with text problem

I am new to photoshop. While going through one of the basic video tutorials, I came to the section where is says to add text. I followed instructions, but can't see what I type. My cursor looks different than the one in the video when I click into the layer with the text tool too. I have a small square dot. The video shows a normal text cursor, as you'd find in Illustrator.
If I type something and click enter, it replaces the name of the layer, but is still not visible in the image. The layer displays as a text layer. What am I doing wrong? Thanks.
Chris.

You mentioned you are new to Photoshop. When using the Type tool if, instead of clicking, you click with a tiny drag to the click you will see this symbol:
Just delete it and try again. Good luck and welcome to Photoshop

Please help with Text Manipulation

I am trying to display text in a fixed frame in Reports 9i.
Example:
Assuming Fixed Display Text Area in Report = 5 lines x 100 characters
Text field in database has capacity of 4000 characters(which is free form text entered by user and can contain tabs/carriage return etc)
How do I read from the database text field to display only the text that would fit in the fixed frame on the report. And I need to display the remaining text in the subsequent pages of the report.
Ideally 5 lines of text would mean 500 characters, but this can vary based on existence of tab spaces or carriage returns.

Hi,
You'll want to post here instead:
Reports
-Ron

Please help! Text format disappear after upgrade to vs2005

Post Author: oim
CA Forum: General
So I upgraded my VS2003 crystal version 10 C# code to VS2005 but the compiler gave me this error: 'CrystalDecisions.Shared.ExportFormatType' does not contain a definition for 'Text' the ExportFormatType enum now only has NoFormat = 0, CrystalReport = 1, RichText = 2, WordForWindows = 3, Excel = 4, PortableDocFormat = 5, HTML32 = 6, HTML40 = 7, ExcelRecord = 8, How do I get the Text format back? Thanks a lot!

Try deleting the .plists for Adobe Acobat.
Quit the application.
You need to look in your user Library/Preferences for the .plist. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Preferences. Move the .plist(s) to your desktop.
Open the application and test. If it works okay, delete the plist(s) from the desktop.
If the application is the same, return the .plist(s) to where you got them from, overwriting the newer ones.
If you prefer to make your User library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I have to use it again after every update. I have also been informed that if you drag the user library to Finder it will remain visible.

Unwanted folder is saved with documents. Please help stop this?

Every time I save a Pages document, a folder appears with QUICKLOOK, index.xml and buildVersionHistory.plist. This is in addition to the normal saved document and its backup.
There must be a way of switching this off but Applecare has been no help so far.

There is a checkbox to 'Save all new files as packages' (or words to that effect) in the General pane of Pages Preferences. Note that these packages will look just the same to you in the Finder, but (should the need arise) though they can be uploaded to an iDisk in the Finder they cannot be uploaded using a browser unless you zip them first (since the http protocol can't handle folders). Also if you are going to email them as attachments it probably best to zip them first.

Please Help stop Texts

Similar Messages

Maybe you are looking for