Please Help! Store loads, but layout is spaced wrong.

Can anyone please tell me if this is a browser or iTunes error. Any ideas? Please help!
http://att.macrumors.com/attachment.php?attachmentid=193582&d=1252612490

The repeat setting can be found from the Nano's Now Playing screen. While playing a track, swipe to the left to bring up additional controls including the repeat and shuffle settings. See page 21 of your iPod's User Guide for more assistance on the repeat setting.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
If it's a 7G Nano, you should only need to tap the Now Playing screen to bring up these additional controls.
B-rock

Similar Messages

PLEASE HELP, iPhone bricked, but not in the 'usual' ways

I have a horrible problem with my iPhone, which usually I have been able to fix most iPhone problems. I've seen a lot of issues as I used to administer a 200 strong iPhone4 fleet, but this has me stumped!
I have an iPhone4 GSM. Up until yesterday it was running iOS 5.1.1, and wanted to upgrade to iOS 6, not jailbroken.
I upgraded iTunes to the latest 10.7.0.21 (x64) and did a full backup/transfer purchases.
Then I hit restore and it upgraded to iOS6.
Then I restored from my backup. At this point everything was working perfectly. I have completed the iOS6 welcome wizard thing and was using my iPhone, iOS6 was working.
Next i synched my apps, music, etc back to my phone. AGAIN everything was working, my apps were back, everything was great!
I decided to do what I usually do last, and that is 'restore from backup' the phone again from the same back to restore icon layouts etc. (I nice little trick I always use).
This is where my problem is. Now my battery was at about 89% (it was without a doubt between 85-90%.)
I watched the restore start, I went and got some coffee and came back a few minutes later. iTunes seemed like it had completed the restore. But my phone was off, tried to wake it up with the home button, nothing. So I waited about a minute just incase it was busy doing something, but it wasn't.
After a minute I just tried to power it on normally just with the sleep button, held it for just 2 seconds or so and the silver apple logo came on.. for about 7 seconds.. then turned off again, nothing.
Tried it again and the same thing happened.
After the second appearance of the silver apple logo, I have been unable to get ANYTHING to happen again (no Silver apple logo, nothing)
I then tried to reset with holding home and sleep together (I waited 60 seconds, nothing).
Tried putting it into DFU mode, nothing.
Tried putting it into recovery mode (both ways), nothing.
I thought it was a power issue, seen that before so I left it on charge overnight on my wall charger, with no change this morning.
Please help, I don't know what to do!! Has anyone got any suggestions.
Thanks in advance
DJLayZ

Try this. First, remove battery and hold the power button down for about 10 seconds, then replace the battery and hold down command-option-p-r while hitting the power button. Hold those keys until you hear the start up chime three times, then release the keys. Any better?

Please help me load an .flv video that has been embeded onto a web page

Hello there,
I was hoping someone on this forum could please help me with one specific problem that I am having. I would like to embed the a flash player into an html page, and load the video from a service that has the streaming video provided.
This is the context of the situation...
We have created a site that was to be used on a showroom floor (no internet connection) and loaded the .flv videos at the local root level for the site.
Now however, we would like it to be an online site. I have been able to use the flash "jw player"to load videos to play using the shadowbox javascript, but when I try to embed it onto a page and have it play, it isn't working and I am not sure why.
Below is the code that is currently working to load the videos on the local root level.
Might someone have any ideas on what I need to replace to have it load the videos from the streaming service?
I would greatly appreciate any assistance that could be provided. I can also provide a URL if it would help.
I would GREATLY appreciate any assistance provided.
<script type="text/javascript" src="swfobject.js"></script>
<script type="text/javascript">
swfobject.registerObject("player1","9.0.98","expressInstall.swf");
</script>
<object id="player1" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" name="player" width="640" height="380">
<param name="movie" value="player.swf" />
<param name="allowfullscreen" value="true" />
<param name="allowscriptaccess" value="always" />
<param name="flashvars" value="file=assets/videos/Bob_Peebler.flv&image=images/videoStatic_Peebler.jpg" />
<object type="application/x-shockwave-flash" data="player.swf" width="640" height="380">
<param name="movie" value="player.swf" />
<param name="allowfullscreen" value="true" />
<param name="allowscriptaccess" value="always" />
<param name="flashvars" value="file=assets/videos/Bob_Peebler.flv&image=images/videoStatic_Peebler.jpg" />
<p><a href="http://get.adobe.com/flashplayer">Get Flash</a> to see this player.</p>
</object>
</object>

Hello,
Thanks a lot for the reply. However, I am pretty confident that the jw player supports the streaming video option, but as I mentioned that I was able to use it as a popup using the shadowbox javascript before. After doing a bit of investigating on how the videos are hosted, I am using "progressive download" method for these videos.
I think the problem is that the player.swf is hosted on my website server - and the videos are then hosted on the media hosting service. I think that the player needs to be located on the media hosting service, and then embedded onto the page along with where to point to the .flv video. Does that sound right?
If so, the paramater I am using to embed the player as I mentioned in my original post is simply:
<param name="movie" value="player.swf" />
does the "value" then have to change to the http:// address for the video player.swf that would then be hosted on my video hosting service?
Little help?
Please let me know if there is anything I can provide to clarify the issue.
Thanks
M

Store loads but Shopping Card has connection issue

iTunes stores loads and I can browse and add songs to my cart, but I am unable to access the cart due to a connection reset. *** is goin on?

It seems like something is wrong with your connection. It would mean that your connection to the apple iTunes server has been dropped, try contacting your ISP about this issue.

Please help. store connection issues.

Error Message: iTunes could not connect to iTunes store. Please check network connection and try again.
Specs: MacBook, 10.4.11, iTunes 7
Additional Information: Another computer with iTunes 9.2 can connect to store just fine. Also, there aren't any proxies enabled and I can access the internet from the MacBook.
Please help.

Read this support article:
http://support.apple.com/kb/TS1713
I have found that often jiggling the connector or snapping it gets it to work.
Ciao.

Please help Ipod charged but just does not come on

I have a new Ipod Nano which is a gift . I have charged it on my laptop which has windows however it displays only when plugged into my lap top, once disconnected post charging it does not come on , please help.

So he is going to upgrade his Acer computer running Windows 7 to Snow Leopard that will fix his problem. How will he install it?
Other than on their website, in the online store, and on the back of the box itself, Apple did not let you know the minimum specifications? Were they supposed to send you a Christmas card with the information? Please don't tell me that when you buy software you don't read the minimum specifications first.
That said, unless you want to upgrade iLife and the same time and purchase iWorks, you can buy the Snow Leopard retail disk for $29 and it will install just fine, assuming that your computer meets the minimum specifications. You might want to post back here with information on your computer just to make sure.
If you are like me and don't use all the applications in iLife and iWorks I word forgo the box set (which is a good price) and buy the apps you want from the Mac App Store. That way if you have no used for Garageband you can buy iPhoto and Pages from iWorks and move on. Need a spreadsheet? You can buy Numbers.

Please help us! How to correct this wrong!

My program throws an unexpected exception as following:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x77C015B5
Function=GetFileVersionInfoSizeW+0x224
Library=D:\WINDOWS\system32\VERSION.dll
Current Java thread:
     at net.csetech.hc.icaocsr.IcaoCsr.ids_Init(Native Method)
     at net.csetech.hc.icaocsr.IcaoCsr.main(IcaoCsr.java:73)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.intellij.rt.execution.application.AppMain.main(AppMain.java:78)
Dynamic libraries:
0x00400000 - 0x0040B000      D:\j2sdk1.4.2_08\bin\java.exe
0x7C900000 - 0x7C9B0000      D:\WINDOWS\system32\ntdll.dll
0x7C800000 - 0x7C8F4000      D:\WINDOWS\system32\kernel32.dll
0x77DD0000 - 0x77E6B000      D:\WINDOWS\system32\ADVAPI32.dll
0x77E70000 - 0x77F01000      D:\WINDOWS\system32\RPCRT4.dll
0x77C10000 - 0x77C68000      D:\WINDOWS\system32\MSVCRT.dll
0x08000000 - 0x08138000      D:\j2sdk1.4.2_08\jre\bin\client\jvm.dll
0x77D40000 - 0x77DD0000      D:\WINDOWS\system32\USER32.dll
0x77F10000 - 0x77F56000      D:\WINDOWS\system32\GDI32.dll
0x76B40000 - 0x76B6D000      D:\WINDOWS\system32\WINMM.dll
0x10000000 - 0x10007000      D:\j2sdk1.4.2_08\jre\bin\hpi.dll
0x00390000 - 0x0039E000      D:\j2sdk1.4.2_08\jre\bin\verify.dll
0x003B0000 - 0x003C9000      D:\j2sdk1.4.2_08\jre\bin\java.dll
0x003D0000 - 0x003DE000      D:\j2sdk1.4.2_08\jre\bin\zip.dll
0x00970000 - 0x00977000      D:\IntelliJ-IDEA-4.5\bin\breakgen.dll
0x02DC0000 - 0x02DCF000      D:\j2sdk1.4.2_08\jre\bin\net.dll
0x71AB0000 - 0x71AC7000      D:\WINDOWS\system32\WS2_32.dll
0x71AA0000 - 0x71AA8000      D:\WINDOWS\system32\WS2HELP.dll
0x02E10000 - 0x02E17000      D:\VSS\icaocsr\jicaocsr.dll
0x02E20000 - 0x02EBA000      D:\VSS\icaocsr\csrsdk.dll
0x02EC0000 - 0x02F58000      D:\VSS\icaocsr\ID_Star.dll
0x02F60000 - 0x02FC5000      D:\VSS\icaocsr\CamConj.dll
0x77C00000 - 0x77C08000      D:\WINDOWS\system32\VERSION.dll
0x02FD0000 - 0x0301E000      D:\VSS\icaocsr\FireCamJ.dll
0x77F60000 - 0x77FD6000      D:\WINDOWS\system32\SHLWAPI.dll
0x74AD0000 - 0x74AD8000      D:\WINDOWS\system32\POWRPROF.dll
0x77920000 - 0x77A13000      D:\WINDOWS\system32\SETUPAPI.dll
0x76080000 - 0x760E5000      D:\WINDOWS\system32\MSVCP60.dll
0x73DD0000 - 0x73ECE000      D:\WINDOWS\system32\MFC42.DLL
0x5FD00000 - 0x5FD0D000      D:\WINDOWS\system32\MFC42LOC.DLL
0x76C90000 - 0x76CB8000      D:\WINDOWS\system32\imagehlp.dll
0x59A60000 - 0x59B01000      D:\WINDOWS\system32\DBGHELP.dll
0x71A50000 - 0x71A8F000      D:\WINDOWS\system32\mswsock.dll
0x662B0000 - 0x66308000      D:\WINDOWS\system32\hnetcfg.dll
0x71A90000 - 0x71A98000      D:\WINDOWS\System32\wshtcpip.dll
0x76BF0000 - 0x76BFB000      D:\WINDOWS\system32\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation total 576K, used 287K [0x10010000, 0x100b0000, 0x104f0000)
eden space 512K, 56% used [0x10010000, 0x10057d38, 0x10090000)
from space 64K, 0% used [0x10090000, 0x10090000, 0x100a0000)
to space 64K, 0% used [0x100a0000, 0x100a0000, 0x100b0000)
tenured generation total 1408K, used 0K [0x104f0000, 0x10650000, 0x14010000)
the space 1408K, 0% used [0x104f0000, 0x104f0000, 0x104f0200, 0x10650000)
compacting perm gen total 4096K, used 1245K [0x14010000, 0x14410000, 0x18010000)
the space 4096K, 30% used [0x14010000, 0x141474a0, 0x14147600, 0x14410000)
Local Time = Mon Oct 31 09:46:57 2005
Elapsed Time = 0
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
Please help and explain this mistake for me. Thank for fromt reply.

Dir sir,
Our program use Native Method in Java with some code in C++ as bellow:
* Class: net_csetech_hc_icaocsr_IcaoCsr
* Method: ids_Init
* Signature: ()I
JNIEXPORT jint JNICALL Java_net_csetech_hc_icaocsr_IcaoCsr_ids_1Init
(JNIEnv *env, jobject obj) {
     if(CSRInit(0) != CSR_OK)
          return 1;
     else
          CSR_DEVICE_STATUS st;
          char revision[STR_SIZE];
          if(CSRGetStatus(revision,&st) != CSR_OK)
               return 1;
          else
               CSR_DEVICE_TYPE tp;
               if(CSRGetDeviceType(&tp) != CSR_OK)
                    return 1;
               if(CSRSetDeviceCallback(CSR_CALLBACK_WINDOW,
                    GetActiveWindow(), NULL, NULL, 0) != CSR_OK)
                    return 1;
     return 0;
* Class: net_csetech_hc_icaocsr_IcaoCsr
* Method: ids_ReadMRZonICAOdocument
* Signature: (Ljava/lang/String;)I
JNIEXPORT jint JNICALL Java_net_csetech_hc_icaocsr_IcaoCsr_ids_1ReadMRZonICAOdocument
(JNIEnv *env, jobject obj, jstring tiffImage) {
     const char *image = env->GetStringUTFChars(tiffImage, 0);
     CSRHANDLE               img;
     CSRImageParameter     para;
     CSRSetDefaultImageParameter(&para);
     para.ImageType = CSR_RAWGRAY;
     para.LightType = CSR_IR;
     para.ExposureTime = 50;
     para.UseShading = FALSE;
     if(CSRCreateImage(&para,&img) != CSR_OK)
          return 1;
     if(CSRAcquire(img) != CSR_OK)
          CSRFreeImage(img);
          return 1;
     BYTE*     binimg;
     DWORD     binimglength;
     if(CSRBinarizeImage(img,&binimg,&binimglength) != CSR_OK)
          CSRFreeImage(img);
          return 1;
     CFile file(image,
          CFile::modeCreate|CFile::typeBinary|CFile::modeWrite);
     file.Write(binimg,binimglength);
     jclass cls = (jclass)env->GetObjectClass(obj);
jfieldID fid;
fid = (jfieldID)env->GetFieldID(cls, "icaoLines", "[Ljava/lang/String");
     BYTE                    *IcaoLines;
     WORD                    Formatcheck;
     UINT                    LinesRead;
     LINE_COORDINATES     *Coords;
     int                         result = 0;
     if(CSRReadIcaoDocument(binimg,binimglength,&IcaoLines,
          &Coords,&Formatcheck,&LinesRead) != CSR_OK)
          result = 1;
     else
          BYTE *pLine = IcaoLines;
          jstring jIcaoLine = env->NewStringUTF("");
          jobjectArray jIcaoLines = env->NewObjectArray(
               LinesRead,cls,jIcaoLine);
          for(UINT i=0; i<LinesRead; i++)
               jIcaoLine = env->NewStringUTF((const char*) pLine);
               env->SetObjectArrayElement(jIcaoLines,i,jIcaoLine);
               pLine += strlen ((const char *)pLine)+1;
          env->SetObjectField(obj, fid, jIcaoLines);
     CSRFree((void**)&IcaoLines);
     CSRFree((void**)&Coords);
     CSRFreeImage(img);
     return result;
* Class: net_csetech_hc_icaocsr_IcaoCsr
* Method: ids_Disconnect
* Signature: ()I
JNIEXPORT jint JNICALL Java_net_csetech_hc_icaocsr_IcaoCsr_ids_1Disconnect
(JNIEnv *env, jobject obj) {
     if (CSRCleanup()!=CSR_OK)
          return 1;
     else
          return 0;
And our program is running on Windows XP Professional.
Our program has problem only with Init Function and we try to increase VM memory but our program is still failure.
If we don't use java environment, but using Visual C++ 6.0, our program has no problem.
However, we must process more complex.
Thank for Reply.
Regards.

Please help, I don't know WHAT is wrong......... (games troubleshooting)

OK, so one night I was playing the game Lode Runner, Bejeweled, and Pacman. It was fully charged. I played until 10% was left. Then, I set it on my iHome. The next night, I can't get the game to fit the screen. Like a 1/2 in. from the left if you have the click wheel in your right hand. I turned it off for 24 hours and that didn't work. I need your help. Only the games I bought do that. Not the others, just those. Please help.

I got it fixed, so if it ever happens to you, restore your iPod at the iPod page under Summary.

ITunes store loads, but only shows a white screen. Help?

I have a Mac and the most up to date version of itunes. Whenever I try to open the itunes store, the "accessing itunes store" bar loads all the way, but nothing ever pops up, its just an empy white screen.
My internet connection is perfectly fine as well, and I've restarted my computer multiple times.
Also, I'm running 10.6.8, Snow Leopard, but I don't necessarily want to upgrade to Lion or Mountain Lion.
Help?

Hello lxjoseolexl,
I found an article with steps you can take when you are not able to connect to the iTunes Store. I recommend following the steps in the section titled "Troubleshooting on a Mac" in this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thank you for using Apple Support Communities.
Best,
Sheila M.

(Please Help) making buttons clickable (layout done in photoshop)

I am a newbie to all of this. I been trying to learn html/css
and I am still learning it but I needed a quick way to get my
website up and running. So, I created my layout in photoshop, I
sliced it and imported it anything dreamweaver. I made the content
area editable. Now I have 10 buttons that needs to be clickable. I
was on my index.html page and use the hotspot tools to try and make
them clickable. Indeed it did on my index page. Was I suppose to
use the hotspot tools or was I suppose to select the image, replace
it and then link it (when I tried that way at first, it messed the
page and had boxes and lines everywhere, like the page was broken
up, I really dont know what I did wrong there)
My problem is that how do I make all 10 pages of my website
buttons clickable without having to go to each page, like the about
page, services page, contact page, etc.... and using the hotspot on
all 10 pages?
Do I have to make it as a template or something?
Here is a picture of the problem...What did I do wrong or how
to fix the problem?
http://i39.tinypic.com/2ltmuzs.jpg

So many problems, so little time. First and most importantly,
I admire your courage to "forge ahead", but you need to start with
the basics (some of the dreamweaver tutorials, template pages, etc.
and learn slowly and methodically.) A well functioning site is far
more important than a graphically pleasing site...
There are many apparent problems based on your jpg, but can't
address any without seeing the code.
Buttons: If they are separate slices, they don't need image
map "hot spots" to link them. Simply select one, and assign a link
to it via the properties window. If you saved your entire "header
graphic" as all one piece, and placed it into your page, that would
be when you would want to assign "hot spots" to each section of the
graphic, but if they are separate pieces, there is no need for the
hot spots.
Templates: Yes, a template is the best way to ensure each
page functions and has the same links as the rest. If you dont have
a template set up, you will need to assign all of your links
separately to each page of your document. To create a template, you
first need to create one good, functioning page, then save as
template. Once a template, you'll need to assign which areas you
want to be editable (usually the "content area"). The advantage of
a template is also that if you need to make a global change to all
of the pages somewhere down the road, the change will automatically
update itself on all pages. After the template is created, create a
"New page from Template".
By the looks of your jpg image, you have a whole host of
other problems with the way the page is set up - if you're using
tables to compile, you aren't using them well. The more complicated
you try to slice up a single table, the likelyhood of problems like
you're showing multiplies exponentially - keep it simple.
Experiment with "nested tables" to see if that helps, but DON"T
OVERDO... If you're using css - do some reading, or try to begin
with one of the Dreamweaver template pages to start, then slowly
modify and test as you go - it's tricky at first.
For that matter, if you don't have any "rollover" effect or
anything else going on in the top area, you may be far better off
saving it as one piece and image mapping the "hot spots" for your
links, and it won't break apart the way you're showing.
Keep trying, but take it slow - take a course or purchase a
tutorial dvd - it is well worth the investment and will save you
countless hours of frustration and "stabbing in the dark"...
Hope that helps - don't be in such a hurry to get your site
"live" - take your time and it will get easier...

Can someone please help me load 10.4?

Have not used this laptop in a few years and pretty dumb when it comes to Macs.
So I've got 10.2.8 and want to install 10.4 but after I hit the install icon it tells me to restart then once rebooted, nothing.
Could someone please dumb it down for me and help me install it.

First, you need the retail Tiger package with the installer DVD. Has a black label with large gray "X".
Insert DVD in the optical drive and restart the computer. After the chime press and hold down the "C" key. When the gray startup screen appears wait for the spinning gear then release the key.
Your machine will need to have a DVD drive and at least 256 MBs of installed RAM plus at least 10 GBs of free space on the hard drive.
Be sure to use Disk Utility to repair the hard drive and permissions before attempting the upgrade or you will run the risk of having to erase the drive if the installation fails.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.5.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. Note that Disk Warrior will not work on Intel Macs.

Please help with Load Variables / ASP

Hello,
I am using Load Variables to retreive a variable from an ASP
page, (which uses a response.write) to output the variable
getfile.onRelease = function()
myData = new LoadVars();
myData.onLoad = function(success){
if(success) {
getfile_txt.text = this.strString;
} else {
getfile_txt.text = "error";
myData.load("sendFile.asp");
stop();
the problem is that the output says "undefined", but when I
access the .asp page through my web browser I get the expected
result of the variable which is "Test1.Doc"
if any1 can help with this, i would be massivley thankful,
thanks.

p.s strString is the variable that I am trying to pass from
the ASP page.

Please help to load image in the database

Hi to all. ....
I need to save image file in the database thru forms ...
I have some image file in the application server and I need to load it in the database in a Blob col..
Any help ... ??
Thank's in advance

Hi!
Your forms version is very important.
If you use forms 10g and you want to load the image on the client, you need webutil.
If you use forms 6 or you want to load the image from the application server to
a image item in your form, you can use the read_image_file forms build-in:
read_image_file ( 'x:\path\image.jpg.', 'JPG', 'block.image_item' );On forms 10g this will be executed on the server and the filename and path has to be
a physical place on your servers harddisk.
The image item has to be an item of type image and must be assinged to a blob colum in your table.
Regards

Please help: Course loads very slow and takes almost 100% cpu and 1.08 GB memory

The total page number is 129. We used Captivate 5.5. We have several Webpage widgets and a few videos. I tried to take out the web widgets and the videos, however, the course still loads very slow.
I would really appreciate if someone can give somve suggestion.
Thank you very much.

Captain Ibuprofen, we actually continued having the slowness problem in the past week. Then one of our developers found out the reason: as same as yours, caused by the page number widget. I wish we would have seen your response earlier. But yeah, so now we took out the page number widget and everything goes normal.
Also thanks for the tips on using the cpInfoCurrentSlide variable when adding the slide number. Thanks Andy.

PLEASE HELP IPOD FREEZE; BUT REAAALLY FREEZE

My ipod is freezed, i can reset it it actually turns on, but 1 or 2 seconds later, is freezed again... i can´t do anything, i reset it connected to the PC, to the power, i reset it, again, and again, and then twice in a row... it wont get into disk mode... any button y press during the 1 or 2 seconds... makes it freeze even quicker... i dont know how to do... it was working well... pleasee help me!!

Gurdok wrote:
i can´t do that because ipod doesn´t even get recognized... it freezes before windows/itunes, detect it...
Can you try with the iPod in forced disk mode?
Putting iPod into disk mode.

Please Help! Store loads, but layout is spaced wrong.

Similar Messages

Maybe you are looking for