Please help: Strange error occurs when loading courseware

Hi all,
We have developed numerous training packages using Captivate 5. For the most part they seem to work nicely, however, three of our users (out of hundreds) have reported the following error (please view attached screenshot).
One user is using Firefox (dont know browser or flash version),
Second User is using Internet Explorer 8.0.7601 with a flash version of 10.2.1.53
Third user tried both IE and Firefox and has a flash version of 10.2.15.1
I myself am using IE 8 with a flash version of 10.2.153 and am not able to replicate the error.
I have done a search on the forums trying to see if anyone else has come accross the same error and found the following thread: http://forums.adobe.com/message/3269584 However we are not using the aggregator for our projects, and although we do use a preloader, the vast majority of our users are not experiencing problems. For those users who are having difficulties two of them seem to be able to open some modules but not others (yet the same pre loader is used throughout all our courseware).
One interesting observation that I have had is that for one user the error only occurs on modules that are using a table of contents (in overlay mode) and they are able to open all other modules. Yet, for one of the other users the error is occuring on all modules, even those without a table of contents.
I can't figure out what may be causing the problem because each user is experiencing the error under slightly different circumstances (In terms of flash versions, browsers and whether or not the module has a table of contents or preloaders).
Has anyone else experienced the above error. If so did you figure out what was causing the problem?
thanks!

Hi,
Would it be possible to share that swf file, so that i will try from my end and see whether i can reproduce the issue?
You can e-mail to my address [email protected]
Thanks,
Vikranth.

Similar Messages

Please help - strange error message when trying to download i tunes

Hi
When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar. I have tried all thr suggestion on the web, deleted i tunes and quicktime, deleted temp folders and even changed the settings in myconfig, but what ever i do i still get the same message!
HELP PLEASE

When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar.
... that's an unusual one.
could you possibly send us a screenshot of the error message box? for instructions, see the following user tip:
hudgie: Taking screenshots to help with problems

Please help: strange error message when trying to burn cds

I have been trying to burn an itunes playlist onto cds and I have never had trouble doing this before, but just this afternoon I have started getting an error message and the disc will automatically eject itself immediately following the initializing stage.
The error message I receive is this: "The attempt to burn a disc failed. The device failed to calibrate the laser power for this media."
What does this mean? What can I do to fix the problem? Thank you in advance!!
(Additional information in case this is helpful: The discs are Maxwell CD-R audio cds with 700mb/80min capacity, and my itunes is version 7.3.1. The playlist is long -- spanning multiple cd lengths -- but I have never encountered a problem with that before, so I don't think that is causing the error.)

Same here.Although i've had this problem since febuary of this year.
Just upgraded to 7.4 and it still does'nt work.Its not an uncommon problem,there has been hundreds of threads about this and thousands of users with the same problem,apple don't seem to want to recognise or solve the problem.Disgraceful behaviour on their part.
I've simply had enough now so i've contacted these...
http://www.bbc.co.uk/consumer/tvand_radio/watchdog/contactindex.shtml
...people.Hopefully they can make apple sit up and take notice of this problem,although i have my doubts.I suggest you do the same if you to have had enough of apple's simply dreadful customer service and faulty software.
Sorry i could'nt be of any help to you but i can assure you that are not alone in this.

Error message: An error occurred when loading the content. Please try again later

Why do some radios do not work on the Apple TV as iTunes, there is no problem ...?
Error message: An error occurred when loading the content. Please try again later
Thanks

Having this problem today. You Tube and other internet parts of the apple tv works. I just can't access my iTunes tv shows.

An error occurred when loading the Cube ; Analysis services 2012

Hi All
We are facing issue on our SQL Analysis services 2012 (11.0.3381.0) on windows 2008 R2.
All cubes are not getting loaded on server. When we restart services some times 2/8 cubes some times 4/8 cubes and some times all cubes get loaded. We are not sure what could be reason for such in consistency. Below are the logs
Failed to load server plug-in extension defined in assembly System. The following error(s) have been raised during the plug-in initialization. Loading of the System assembly failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException;Could
not load file or assembly 'msmdspdm, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. Strong name validation failed. (Exception from HRESULT: 0x8013141A)
Strong name validation failed. (Exception from HRESULT: 0x8013141A). Enumeration of types or functions through reflection in managed code failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException.
OLE DB or ODBC error: Query timeout expired; HYT00.
LOGS :
(12/6/2013 7:45:12 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the Claim Industry Summary Metrics Current. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:42 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:44 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:45 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:55 AM) Message: Service stopped. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210001)
(12/6/2013 7:47:04 AM) Message: The Query thread pool now has 1 minimum threads, 40 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingShort thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingLong thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The Processing thread pool now has 1 minimum threads, 64 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x000000000000001f now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000003e0 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x0000000000007c00 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000f8000 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:11 AM) Message: The flight recorder was started. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210005)
(12/6/2013 7:47:11 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
Thanks
Saurabh Sinha
http://saurabhsinhainblogs.blogspot.in/

Hi Saurabh,
Please elaborate your scenario or OLAP Server environment with more detail. What's the method you used to load the SSAS cube?
For this issue, I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com), so that a dedicated Support Professional can assist you in a more efficient manner.
Regards,
Elvis Long
TechNet Community Support

Error occurs when loading transaction data from other model

Hello Experts, I am trying to validate my transformation file and I can see peculiar behaviour of the transformation file. Even though the transformation file is not complete/ complete with all the mappings, i am getting the same error as above.
I can see options, mapping and conversion sections are validating successfully and throwing the above error.
Incomplete Transformation File
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 10
ROUNDAMOUNT=
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
Validating the transformation files
Validating options...
Validation of options was successful.
Validating mappings...
Validation of mappings was successful.
Validating conversions...
Validation of the conversion was successful
Creating the transformation xml file. Please wait...
Transformation xml file has been saved successfully.
Begin validate transformation file with data file...
[Start test transformation file]
Validate has successfully completed
ValidateRecords = YES
Error occurs when loading transaction data from other model
Validation with data file failed
I am getting the same error with complete transformation file also. Please let me know where I am doing the mistake or is it a system error?
Thanking you
Praveen

Hi,
By
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
you want CUSTOMER to receive a fixed string "NO_CUST"?
If so use,
*MAPPING
CUSTOMER = *STR (NO_CUST)

Error occurs when loading transaction data from other cube

Hi Gurus,
I'm currently working on a Transformation File for loading Transactional Data from BW to BPC but a error message is displayed "Error occurs when loading transaction data from other cube". I have already checked permissions for my user, double checked my transformation file and the dimensions, made all conversion files needed and the message has not changed.
Can anybody help me to solve this problem?!
Thanks a lot & Best Regards,
HH

Hi,
Here, the Transformation File & Conversion File. I have already tested both with another different InfoCube and they work but no for the one needed.
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
Category=*NEWCOL(ACTUAL)
P_0BASE_UOM=0BASE_UOM
P_0BUS_AREA=0BUS_AREA
P_0COSTCENTER=0COSTCENTER
P_0FUNDS_CTR=*NEWCOL(null)
P_0GL_ACCOUNT=0ACCOUNT
P_0LOC_CURRCY=*NEWCOL(MXN)
P_0MATL_TYPE=*NEWCOL(null)
P_0VENDOR=0VENDOR
P_DataSrc=*NEWCOL(UPLOAD)
P_ZMATERIAL1=0MATERIAL
P_ZMATERIAL2=*NEWCOL(null)
P_ZMATL_CLASS=*NEWCOL(null)
P_ZMATL_TESP=*NEWCOL(null)
P_ZRATIO=*NEWCOL(KF_inpmdInt)
Time=0CALMONTH
SIGNEDDATA=0TOTALSTCK
*CONVERSION
Time=Time_conv.xls
EXTERNAL     INTERNAL
201101          2011.JAN
201102          2011.FEB
201103          2011.MAR
201104          2011.APR
201105          2011.MAY
201106          2011.JUN
201107          2011.JUL
201108          2011.AUG
201109          2011.SEP
201110          2011.OCT
201111          2011.NOV
201112          2011.DEC
Thank you for taking at glance to the files.
Best Regards,
HH

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1

Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

An error occurred when loading

when i try to play netflix on apple tv it say "an error occured when loading, try again later"

Hi Saurabh,
Please elaborate your scenario or OLAP Server environment with more detail. What's the method you used to load the SSAS cube?
For this issue, I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com), so that a dedicated Support Professional can assist you in a more efficient manner.
Regards,
Elvis Long
TechNet Community Support

"Error occurs when loading transaction data from other model" - BW loading into BPC

Hi Experts,
I'm having a problem with my data loading from BW, using the standard Load InfoProvider Selections data manager package.
If I run for a period without data it succeeds (with warning) but if there is data to be extracted I get the following error:
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other model
model: AIACONS. Package status: ERROR
As it runs ok when there isn't data it appears there is something preventing the movements of data out of the cube itself, rather then a validation issue.
Has anyone encountered similar or have any ideas as to the problem?
Best,
Chris

Hi Vadim,
It's not specific to the transformation file as I have tried with others for the same BW cube and get the same result.
We get a warning when we try and validate the transformation file:
"Error occurs when loading transaction data from other model".
This only appears in the validation pop up and doesn't throw up any warnings about the transformation file itself. The validation log says:
Validate and Process Transformation File Log
Log creation time
3/7/2014 16:09
The result of validation of the
conversion file
SUCCESS
The result of validation of the
conversion file with the data file
FAIL
Validation Result
Validation Option
ValidateRecords = NO
Message
Error occurs when loading transaction data from other model
Reject List
I can't find any errors anywhere else.
Best,
Chris

Linkage error occured when loading javaclass into InterfaceMapping

Hi All,
i created java file having input xml and output xml file,i made it as one .jar file ,i imported that one into IntegrationRepository in importedArchive,when i call that .class file into InterfaceMapping iam getting this error, Linkage error occured when loading javaclass . how to solve this one
regards,
jasmine

Hi Prateek,
iam using jdk1.4.2
still iam not able to activate the interfacemapping ,iam getting this error
Linkage error occurred when loading class JavaMapping (http://myxmlnamespace, 21279630-c687-11dd-9b90-db1010109e85, -1)
here JavaMapping is my java class name
while activating the interfacemapping iam getting this error.
regards,
jasmine

Linkage error occurred when loading class MyClass

Hi
I have written one simple class name MyClass and i have created jar file and i imported into import archive... but in interface mapping while i am testing i am getting the <b>"<b>Linkage error occurred when loading class MyClass"</b></b> error.... why i am getting this error
Thanks & Regards
Ravi Shankar B

Here it goes:
Symptom
The LINKAGE_ERROR error occurs during the mapping.
The trace contains "java.lang.NoClassDefFoundError: Illegal name":
Other terms
XI 30, Mapping, Linkage Error
Reason and Prerequisites
As of the jdk 1.4.2_05 from Sun, this program error occurs during the mapping in the runtime or during testing in the Repository. This error may also occur in conjunction with jdks of other vendors or other versions.
Solution
The error is corrected with Support Package 5 for Support Package 03 for the XI TOOLS 3.0 software component.
Import the corresponding archive SAPXITOOL03P_5.SCA for SAP Exchange Infrastructure XI 3.0 as described in the Netweaver 04 Support Package Stac Guide.
You will find the archive and the guide in the SAP Service Marketplace under the alias "SP stacks -> SAP NetWeaver -> SAP NetWeaver 04".
Regards
Vijaya

PLEASE HELP! Error Message When Trying to Publish Site

No matter how many of these errors I fix (edit the file and re-upload it onto the site), Muse comes up with a new error every time I try and publish. How can I resolve this issue, so I can publish my updated site. It should not be a problem with the files considering I have been able to publish the same files in the past...something is wrong with Muse itself.
PLEASE HELP!!@

Business Catalyst does not support special characters in file names (i.e. "&"). Through normal paths of placing or importing files, Muse will automatically alter the file names during publish to remove the special characters. The one exception path I'm aware of is an .oam file from Edge, where Muse doesn't have enough knowledge of what all is within the .oam package to safely alter the file names.
When the error occurs, is it always for a file that contains a special character in the file name?
How many files are being uploaded?
If you click "Resume" does the Publish process:
A) Proceeds and completes
B) Puts up the same dialog for the same file
C) Puts up a similar dialog, but for a different file
D) Other?
Thanks.

Error occurs when loading videos

Please help! everytime i try to load or convert a video to my ipod, an error pop up and says "itunes has generated errors and will be closed" this also occurs after i buy videos from itunes...meaning that i ended up buying a video without actually getting it. could someone provide info please?

hi omar!
sorry for the delay.
let's try to enlist some additional technical help. we'll get a crash log from itunes, and send it to so someone who can interpret crash logs.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
in Windows XP: This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
on Windows 2000: try searching for the "Dr Watson" folder to locate it. (it's been a while since i used Windows 2000.)
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
generate the crash, collect the crash log, and send it to this email address
in the email:
(1) state the precise version number of itunes that you're using. (go into your "Help > About iTunes" to doublecheck.)
(2) include the URL to this thread so that the person who gets the email has some context, but also give as much information about the context of the crashing as you can.
love, b

HT201210 please help with error occured 3194

Please I would like to update my iphone 4 to ios 6.0.1 but i tried and keeps saying error occured 3194 ...i would like to resore my iphone factory mode..or about to sale...apple stuff keeps breaking on me please... help...

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

Please help: Strange error occurs when loading courseware

Similar Messages

Maybe you are looking for