Please help. stuck at Lenovo logo

I bought the IdeaPad K1. Three weeks back. it was with 3.1 honeycomb. It use to freez i told my friend and he followed some website and downloded OTA updates and installed one of them went well. Today they added some new update , he tried and now the tablet gets stuck at Lenovo logo and goes infinit restarts...

I have the same problem after I wake up one night. Now my k1 stuck on infiniti loop to reboot. Can someone from Lenovo help?

Similar Messages

Lenovo H500s stuck at Lenovo logo boot loop

I've never had an easy use with this PC eversince I purchased it. It first rejected Windows 7 to be installed due to BIOS incompatibility which I had been warned before. I flashed the new BIOS version shared across the forum that worked for some people, it worked for me too.
 
Then just yesterday when I turned it on, it went into Lenovo logo for few seconds then restarted. It kept repeating the boot loop before I ran the power down to shut it completely. Already ran a system diagnose but found nothing. This already occurred before when I had to perform a windows fresh reinstallation for a constant fix, it runs normally for couple of weeks till yesterday when the problem came back.
 
Any ideas on what to do in this situation ?

Hi Warnbroom,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system stuck at Lenovo logo in your Lenovo H500s laptop.
Try to remove the hard drive(HDD) and check for the issue if the system is able to boot to BIOS.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Table Yoga 10 stuck at Lenovo logo.

I tried to recover it by pressing the Power+Volume button, it showed a chinese menu which I choose the second option with 2 "M"s it rebooted after like 5 seconds and stuck again in the same Lenovo logo, I'm kind of lost, any help would be appreciated.

Hi Warnbroom,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system stuck at Lenovo logo in your Lenovo H500s laptop.
Try to remove the hard drive(HDD) and check for the issue if the system is able to boot to BIOS.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

[LENOVE G460] Stuck at Lenovo Logo Screen when a Boot-able USB plugged in

The subject says it all.
I was thinking of doing a Live Install of a Linux Distribution using a Bootable USB.
So I plugged the Boot-able USB and then Power the Laptopn ON and then press F2 to enter the BIOS SETUP
But even after a few minutes the screen doesn't even budge from the Lenovo Logo... It just says "Entering Setup..."
First I thought something was wrong with my Boot-able USB so I checked it by using another laptop and TADA!!!! I managed to enter the bios setup screen, change the boot order and then start the Linux Installation without any problem.
And then I decided to do it again on the Lenovo G460 and then... The same Stuck at The Lenovo Logo Screen happened again.
Could Anyone shed some light on this problem?
Thanks XD

Hi Warnbroom,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system stuck at Lenovo logo in your Lenovo H500s laptop.
Try to remove the hard drive(HDD) and check for the issue if the system is able to boot to BIOS.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

LENOVO G50-30 stuck at lenovo logo and cant even enter bios

Hello
I yust got my lenovo G50-30 and wanted to install win 7 on it. after the first BsoD I went to bios and changed the AHCI to legacy mode. Got the same BsoD. After that I changed the Os mode from win 8 to win 7 ... loaded the factory default settings and putted from AHCI to legacy mode again.
After that the laptop turns on, but it stucks at lenovo logo. I cant access the bios anymore to make any other changes. If I insert a win7 instalation disc, it start to spin but with no sucess. also cant acess the boot options anymore.
Any help greatly apreciated

I suggest removing battery and AC, holding the power button for more than 15 seconds to reset the BIOS back to default settings then see if the issue remains.
Make sure to post the results.
Good luck.

G500 stuck on lenovo logo

g500 stuck on lenovo logo intermittently sometimes boot to windows sometimes stops on lenovo logo bios updated

Hey computerworld,
It could be some device that is connected to the USB port of your laptop or the broken USB port itself. Try to disconnect any USB connected device like mouse and try to boot up. If it does not help, remove the battery from laptop and try again. Let me know what happened.
Microsoft Certified IT Professional (MCITP)

Lenovo K910 Stuck on Lenovo logo

I have lenovo with recovery and oryginal software(4.2.2). Today I want to enter to recovery CWM. I restart phone and make mistake. Instead to push volume+ I pushed volume+ and volume- together. Now i stuck on lenovo logo, i try diffrent combination of buttons but still I have logo of lenovo. What shuld I do ?

Press combination of Power + Volume down button after a vibration release the power button keep holding the Volume button its should entering the recovery mode.. good luck.

G500S Stuck in Lenovo Logo Screen

I have a g500s which runs with Win7. Last month it got stuck in the logo screen i tried the flee-power process but it did not work so i took it to the service center and they said they have to change the keypad since it was causing the issue, my laptop is still in warranty so i got it changed for free. i could use the laptop without any issue for one week. and the problem starts again and this is really getting annoying.
when i press ctrl+alt+del it restarts thats the only thing i can do, and the recovery key doesn't work.
i have tried the flee power.

hi lipokjmr,
Welcome to Lenovo Community Forums!
If the system get's stuck in the Lenovo Screen,
It means that a hardware cannot be initialized.
Since the system is still under Warranty I suggest you call Lenovo Technical Support and Report that the problem showed up again, they may look for other Parts that is causing the Issue or it may be a diff Part Failing.
Hope this helps
CHeers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Black screen after stuck in lenovo logo

When I was shutting my computer down, the lights and the power didn't turn off so I forced it to shutdown. The next day I tried booting it up, and I was stuck in the lenovo logo for a while. When the lenovo sign is gone the screen is.just black no log in option whatsoever. My.laptop is the lenovo u410

hi pezza1979,
Welcome to the Forums.
Your issue might be similar to this thread.
Can you try the following:
1. Follow this guide on how to enable Legacy Safe Mode
2. When done, try to boot the machine in Safe Mode. If everything's working fine on Safe Mode, perform a clean boot and observe the machine in normal mode.
If same problem, try to disable graphics switching:
3. Boot into the BIOS by pressing F2 on bootup or by pressing the OneKey Recovery button > BIOS Setup
4. In the BIOS, navigate to the Configuration Tab and set Switchable Graphics to UMA Only.
- LInk to picture
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Please help stuck in recovery mode

Hi can someone at apple please help me. I was updating my ipod to ios 8.3 when it was half way done i accidentally shut it of. Now my ipod is stuck in recovery mode. When i try updating it via itunes i tried to update it however it keeps saying that it will take over 500 hours and i also have a very good inter net connection and now i dont know what to do. someone please help me!!!!

Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Please help - Stuck with JTable???

Hi everyone, i have had this problem now for ages and really wanna solve it - hope u can help!
I have a Jtable and basically column 3 has a value in it, column 4 is editable and takes in a value that the user enters. I need to take the value from column 3 and multiply it by the number entered into column 4 to update column 5 with the result.
I have looked over and over the API for this and saw working examples, however i am using my own table model class and finding it hard to adapt these examples to work with my code, below is my table model class and the method i have written to try undertake this piece of functionality, can anyone help me get this working - dukes!!
class ResultSetTableModel extends AbstractTableModel {
protected Vector columnHeaders;
protected Vector tableData;
protected Vector rowData;
private Connection con;
private int column_count;
int QTY_COLUMN = 4;
private double value;
private JTable table;
public void fillTableModel (ResultSet result) throws SQLException {
     ResultSetMetaData rsmd = result.getMetaData();
     int count = rsmd.getColumnCount();
     columnHeaders = new Vector();
     tableData = new Vector ();
     for (int i = 1; i <= count; i++)
          columnHeaders.addElement(rsmd.getColumnName (i));
          //System.out.println(rsmd.getColumnName(i));
     columnHeaders.addElement("Qty");
     columnHeaders.addElement("Total");
     while (result.next())
          rowData = new Vector (count);
          int row = 0;
          for (int i = 1; i <= count ; i++)
               rowData.addElement (result.getObject(i));
          rowData.addElement("4");
          rowData.addElement("0.00");
          tableData.addElement (rowData);
     result.close();
     fireTableDataChanged();
public int getColumnCount ()
     return columnHeaders.size();
public int getRowCount ()
     return tableData.size();
/*public Object getValueAt (int row, int column)
     Vector rowData = (Vector) (tableData.elementAt (row));
     return rowData.elementAt (column);
public Object getValueAt(int row, int col){ //This is the method i have written
     int sum = 0;
     if(col == 5) {
     try {
          sum = Integer.parseInt((String)getValueAt(row, 3)) * Integer.parseInt((String)getValueAt(row,4));//Need to take a user input here instead of a value - i think!
     catch (Exception e)    { //Sum above not working as column 5 displays the number 4 in each row
          sum = 4;
     return (new Double(sum));
     else {
          Vector rowData = (Vector) (tableData.elementAt (row));
          return rowData.elementAt (col);
public boolean isCellEditable (int row, int column )
     return (column == QTY_COLUMN);
public String getColumnName (int column)
     return (String) (columnHeaders.elementAt (column));
public void emptyColumn(int column){
     int rowCount = tableData.size();
     for (int i = 0; i < rowCount; i++)    {
          Vector rowData = (Vector)tableData.elementAt(i);
          rowData.setElementAt("", column);
     fireTableDataChanged();
public void setValueAt(Object value, int row, int column) {
         ((Vector)tableData.elementAt(row)).setElementAt(value, column);
         fireTableCellUpdated(row, 5);
}Can anyone please help and yes im desperate, he he
Thanks in advance

Here's something:import java.awt.*;
import java.util.*;
import javax.swing.*;
import javax.swing.table.*;
public class Test extends JFrame {
    public Test () {
        getContentPane ().setLayout (new BorderLayout ());
        getContentPane ().add (new JTable (new TestModel ()));
        setDefaultCloseOperation (EXIT_ON_CLOSE);
        setTitle ("Test");
        pack ();
        setLocationRelativeTo (null);
        show ();
    public static void main (String[] parameters) {
        new Test ();
    private class TestModel extends AbstractTableModel {
        private java.util.List data;
        public TestModel () {
            data = new ArrayList ();
            data.add (new Pair (3, 4));
            data.add (new Pair (1, 7));
            data.add (new Pair (2, 9));
            data.add (new Pair (6, 5));
            data.add (new Pair (8, 0));
        public int getRowCount () {
            return data.size ();
        public int getColumnCount () {
            return 3;
        public Object getValueAt (int r, int c) {
            Pair pair = (Pair) data.get (r);
            int value;
            switch (c) {
                case 0:
                    value = pair.a;
                    break;
                case 1:
                    value = pair.b;
                    break;
                default:
                    value = pair.a * pair.b;
                    break;
            return new Integer (value);
        public Class getColumnClass (int c) {
            return Integer.class;
        public boolean isCellEditable (int r, int c) {
            return c < 2;
        public void setValueAt (Object wrappedValue, int r, int c) {
            Pair pair = (Pair) data.get (r);
            int value = ((Integer) wrappedValue).intValue ();
            switch (c) {
                case 0:
                    pair.a = value;
                    break;
                case 1:
                    pair.b = value;
                    break;
            fireTableRowsUpdated (r, r);
        private class Pair {
            public int a;
            public int b;
            public Pair (int a, int b) {
                this.a = a;
                this.b = b;
}Kind regards,
  Levi

Please Help stuck on apple boot logo

I am stucked at the apple boot logo and i can't disable filevalut to go in safe mode. When i've pressed cmd p r and went in utility disk it seems that i have free on the macintosh hd only 16.3 MB so i have to go in safe mode to delete some files and reboot the system. Anyone can help me?

I can't help, I'm afraid. My suggestion is that you re-post your message with a different title, including that you cannot get into Safe Mode. It would also be good to include the year and model (e.g., Mid-2010 MacBook Pro) so folks know more about what you are dealing with.
One thought I have is to replace your hard drive with a larger one, install your original OS X on that new HDD and arrange to access your current drive via USB so you can get the files off of it. But there may be another way -- though you clearly need a larger hard drive in your computer.
Phil

Please HELP, Stuck on grey screen with Old Apple Logo in it

Hi , my computer froze today and when I tried to reboot the hard drive starts but stays on a grey screen with a small folder in the middle with an Apple logo in it.
What should I do, all suggestions welcome!

Hi, and welcome to Apple Discussions.
Here are links to a couple of articles on recovering from the flashing question mark folder:
http://docs.info.apple.com/article.html?artnum=58042
http://www.bombich.com/mactips/openfirmware.html
I hope something there helps.

Zen X-Fi 2----PLEASE HELP STUCK ON ZEN SCREEN

my player is stuck on the ZEN screen and I cant do anything----any suggestions

try resetting it
Push the little button on the lower side of the player with something pointy like the plug of the headphones.
picture: http://media.generationmp3.com/lebel...2/DSCF7769.JPG

Incompatibe type error can some please help stuck in rut

found : double
required: javax.swing.JTextField
TotalIncomeField = (num1 + num2 + num3);
try {
double num1 = Double.parseDouble(LoansField.getText());
double num2 = Double.parseDouble(WagesField.getText());
double num3 = Double.parseDouble(OtherField.getText());
double num4 = Double.parseDouble(RentField.getText());
double num5 = Double.parseDouble(FoodField.getText());
double num6 = Double.parseDouble(OtherField2.getText());
String op1 = (String)LoanComboBox.getSelectedItem();
String op2 = (String)WagesComboBox.getSelectedItem();
String op3 = (String)OtherComboBox.getSelectedItem();
String op4 = (String)RentComboBox.getSelectedItem();
String op5 = (String)FoodComboBox.getSelectedItem();
String op6 = (String)Other2ComboBox.getSelectedItem();
//Below I am adding the loans, wages & other field so that it total correctly incompatible type error found below (1).
(1) TotalIncomeField = (num1 + num2 + num3);
(2) TotalSpendingField = (num4 + num5 + num6);
//Here above I am adding the rent, food & other field so that it total correctly incompatible type error found above (2)
double result = 0;
if (op1.equals("Weekly"))
result = num1 * 4.3333333;
else if (op1.equals("Monthly"))
result = num1;
else if (op1.equals("Yearly"))
result = num1 / 12;
else if
(op2.equals("Weekly"))
result = num2 * 4.3333333;
else if (op2.equals("Monthly"))
result = num2;
else if (op2.equals("Yearly"))
result = num2 / 12;
else if
(op3.equals("Weekly"))
result = num3 * 4.3333333;
else if (op3.equals("Monthly"))
result = num3;
else if (op3.equals("Yearly"))
result = num3 / 12;
TotalIncomeField.setText(String.format("%.2f",result));
if
(op4.equals("Weekly"))
result = num4 * 4.3333333;
else if (op4.equals("Monthly"))
result = num4;
else if (op4.equals("Yearly"))
result = num4 / 12;
else if
(op5.equals("Weekly"))
result = num5 * 4.3333333;
else if (op5.equals("Monthly"))
result = num5;
else if (op5.equals("Yearly"))
result = num5 / 12;
else if
(op6.equals("Weekly"))
result = num6 * 4.3333333;
else if (op6.equals("Monthly"))
result = num6;
else if (op6.equals("Yearly"))
result = num6 / 12;
TotalSpendingField.setText(String.format("%.2f",result));
} catch (NumberFormatException ex) {
}

TotalIncomeField is a JTextField object reference, not a numeric value holder. What you may want is to put the string representation of the calculation into the CONTENTS of the JTextField. There is a setText method for that.
TotalIncomeField.setText(theText);
I'll assume you can work out how to turn the calculation into a string representing that calculation.
SIGH SIGH SIGH
Thanks for CROSSPOSTING this, you dolt.
http://forum.java.sun.com/thread.jspa?threadID=780703

Please help. stuck at Lenovo logo

Similar Messages

Maybe you are looking for