Please Help ------SVRMGR -ERROR - ORA-12538

PPL,
I am getting "MESSAGE 4505 NOT FOUND,NO MESSAGE FILE FOR PRODUCT=RDBMS,FACILITY=MGR ERROR WHILE TRYING TO RETRIEVE TEXT FOR ERROR ORA-12538" ...Can anyone help me with this ? I cannot connect to SVRMGR from cmd prompt.

I wonder why you use CHAR in the first place, why not VARCHAR2(1)?
You have to put Y and N between quotes:
create table mytab (
Financial_Aid_Requested VARCHAR2(1) NULL
CONSTRAINT CK3APPLICATION_INFO
CHECK (Financial_Aid_Requested IN ('Y','N'))

Similar Messages

Please Help - "page error" / a system error occurred

I am very basic with Coldfusion Developed websites and pretty awesome on HTML and PHP. While working on a website I made an HTML change and added a line to a page. All works well on the test website/server but after uploading the changed page the page went offline/errored a day later.
I have an error receipt and am hoping to resolve this issue with some insight from a good Coldfusion Developer or Programmer.
PLEASE HELP, see error below.
A system error occurred: http://www.mix.co.zm/mix_schools.cfm?
Error - struct
Detail    Note: If you wish to use an absolute template path (for example, template="/mypath/index.cfm") with CFINCLUDE, you must create a mapping for the path using the ColdFusion Administrator. Or, you can use per-application settings to specify mappings specific to this application by specifying a mappings struct to THIS.mappings in Application.cfc. <br> Using relative paths (for example, template="index.cfm" or template="../index.cfm") does not require the creation of any special mappings. It is therefore recommended that you use relative paths with CFINCLUDE whenever possible.
Message    Could not find the included template components/mix_documents2.cfm.
MissingFileName    components/mix_documents2.cfm
StackTrace    coldfusion.tagext.lang.IncludeTag$NoSuchIncludeTemplateException: Could not find the included template components/mix_documents2.cfm. at coldfusion.tagext.lang.IncludeTag.setTemplate(IncludeTag.java:349) at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:360) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:94) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:79) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62) at coldfusion.CfmServlet.service(CfmServlet.java:200) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at com.intergral.fusionreactor.filter.FusionReactorFilter.i(FusionReactorFilter.java:566) at com.intergral.fusionreactor.filter.FusionReactorFilter.c(FusionReactorFilter.java:258) at com.intergral.fusionreactor.filter.FusionReactorFilter.doFilter(FusionReactorFilter.java: 164) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
TagContext    Error - array
1    Error - struct
COLUMN    0
ID    CFINCLUDE
LINE    15
RAW_TRACE    at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15)
TEMPLATE    D:\hshome\mixnet\mix.co.zm\mix_schools.cfm
TYPE    CFML
TagName    CFINCLUDE
Type    MissingInclude

With LR closed move the preferences file to the Trash as described at the below link. You will lose your Preferences settings, so you may want to record them if unsure what you have changed from the default settings.
http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom
DO NOT RESTART LR!
Next uninstall LR and then completely shutdown your system and turn the power OFF. Your catlog(s) will not be removed, so no worries.
Restart your system and reinstall LR using the latest version download available (LR5.4, LR4.4).
What version of LR and OS X are you using?

Hello apple.help me network iphone 4 use ios7.12 error network.acoount icloud apple please help support errors no service network.thank you

hello apple.help me network iphone 4 use ios7.12 error network.acoount icloud.apple please help support errors no service network.thank you
<Personal Information Edited by Host>

tran ngoc nhan,
Viết bằng tiếng mẹ đẻ của bạn?
Tôi đoán Việt Nam?
Chúng tôi có thể dịch!
Nói cho tất cả vấn đề của bạn!
Cung cấp cho nhiều chi tiết!
Nếu không Việt Nam, dịch này ở đây!
https://translate.google.com/
Write in your native language?
I guess Vietnamese?
We can translate!
Tell all your problem!
Give much detail!
If not Vietnamese, translate this here!
https://translate.google.com/
CCC

Please help: Case Statement - ORA-01722: invalid number Error

Hi All,
I'm trying to use Case statement to recode Cancelled statuses into two groups
'Reject' if the difference between first date and last date is less than 29 and
'Accept' if the difference between first date and last date is greater than 30
Here is my 'test' data:
STATUS     FIRST_DATE     LAST_DATE
Transfer     10/08/2011     10/09/2011
Mover     10/08/2011     15/09/2011
Cancel     10/08/2011     16/09/2011
Cancel     10/08/2011     5/09/2011
Here is the syntax
select a.*,
(CASE WHEN a.STATUS ='Cancel' THEN (round(a.LAST_DATE-a.FIRST_DATE))
ELSE 0
END) CAN_DAYS,
(CASE WHEN 'CAN_DAYS' >29 THEN 'Reject'
WHEN 'CAN_DAYS' <30 THEN 'Accept'
END) Reject_Accept
from test a
The first CASE statement works fine and gives me this
STATUS     FIRST_DATE     LAST_DATE     CAN_DAYS
Transfer     10/08/2011     10/09/2011     0
Mover     10/08/2011     15/09/2011     0
Cancel     10/08/2011     16/09/2011     37
Cancel     10/08/2011     5/09/2011     26
but the second CASE produces ORA-01722: invalid number Error. It is something to do with the CAN_DAYS data type, Oracle doesn't see it as Numeric i think.
The result i want to see would be
STATUS     FIRST_DATE     LAST_DATE     CAN_DAYS Reject_Accept
Transfer     10/08/2011     10/09/2011     0
Mover     10/08/2011     15/09/2011     0
Cancel     10/08/2011     16/09/2011     37 Accept
Cancel     10/08/2011     5/09/2011     26 Reject
Could someone please help me to fix the syntax?
Thank you in advance,

This seems to give you your desired results...
with test as
( select 'Transfer' as status, to_date('10/08/2011') as first_date, to_date('10/09/2011') as last_date from dual union all
    select 'Mover'             , to_date('10/08/2011')              , to_date('15/09/2011')               from dual union all
    select 'Cancel'            , to_date('10/08/2011')              , to_date('16/09/2011')               from dual union all
    select 'Cancel'            , to_date('10/08/2011')              , to_date('05/09/2011')               from dual
select status
     , first_date
     , last_date
     , CAN_DAYS
     , CASE
          WHEN CAN_DAYS =   0 THEN NULL
          WHEN CAN_DAYS < 30 THEN 'Reject'
          WHEN CAN_DAYS >= 30 THEN 'Accept'
        END Reject_Accept
from ( select status
               , first_date
               , last_date
               , CASE
                    WHEN STATUS ='Cancel' THEN round(LAST_DATE-FIRST_DATE)
                    ELSE 0
                  END CAN_DAYS
            from test
;

Need help for error ORA-06550

0 down vote favorite
Can any body please help I am getting below error for the code.
ORA-06550: line 20, column 33:
PLS-00306: wrong number or types of arguments in call to '||'
ORA-06550: line 20, column 12:
PL/SQL: Statement ignored
...condition1: if I put value explicitly in my parametrize cursor then it is not reaching till 2nd FOR loop. and after printing 'Inside' statement is executed. Condition2. If I put variable as parameter then it is giving above mentioned error.
DECLARE
/* First cursor */
CURSOR get_tables IS
SELECT DISTINCT * FROM src_table_list tbl ;
/* Second cursor */
CURSOR get_columns(v_table_name varchar2) IS
SELECT SUBSTR (SYS_CONNECT_BY_PATH (column_name, ','), 2) csv
FROM (SELECT column_name , ROW_NUMBER () OVER (ORDER BY column_name ) rn,
COUNT (*) OVER () cnt
FROM USER_TAB_COLUMNS where table_name = v_table_name)
WHERE rn = cnt
-- and col.sn = v_sn
START WITH rn = 1
CONNECT BY rn = PRIOR rn + 1;
BEGIN
FOR i IN get_tables LOOP
dbms_output.put_line( 'Inside ' );
FOR j IN get_columns(i.table_name) LOOP
dbms_output.put_line('SELECT '|| j ||'FROM'||i.table_name||' ;' );
dbms_output.put_line( ' ' );
END LOOP;
END LOOP;
END;
/

Hi,
j is a cursor and you need to specify the column name <b>j.csv</b>
Also you need to add space before and after literal 'FROM':
DBMS_OUTPUT.put_line ('SELECT ' || j.csv || ' FROM ' || i.table_name || ' ;');Please read SQL and PL/SQL FAQ
When you put some code please enclose it between two lines starting with {noformat}{noformat}
i.e.:
{noformat}{noformat}
SELECT ...
{noformat}{noformat}
Regards.
Al
Edited by: Alberto Faenza on Dec 1, 2012 4:27 PM

Please Help! ERROR: Application Server failed. when Refreshing

Please help on this below issue. Thanks.
We have a requirement that using ASP.NET (C#), we need to open saved .rpt file (saved with data and the rpt file is assigned to the web page as query string) and let the users refresh themselves with latest data by clicking at refresh icon of the CrystalReportViewer. But it throws 'The Report Application Server failed' error message. What could cause this message. below is the piece of code we are using to configure the report.
private void ConfigureCrystalReports()
string reportPath = Server.MapPath("Reports
SEMS0001_UBS.rpt");
this.CrystalReportSource2.ReportDocument.Load(reportPath);
CrystalReportViewer1.Visible = false;
SetDBLogonForReport(this.CrystalReportSource2.ReportDocument);
int i = 0;
foreach (ParameterField field in this.CrystalReportSource2.ReportDocument.ParameterFields)
field.HasCurrentValue = true;
//this.CrystalReportSource2.ReportDocument.Refresh();
CrystalReportViewer1.ParameterFieldInfo = this.CrystalReportSource2.ReportDocument.ParameterFields;
CrystalReportViewer1.Visible = true;
public void SetDBLogonForReport(ReportDocument reportDocument)
Tables tables = reportDocument.Database.Tables;
connectionInfo.ServerName = "server"; //ConfigurationManager.AppSettings["DBServer"];
connectionInfo.UserID = "user"; //ConfigurationManager.AppSettings["DBUser"];
connectionInfo.Password = "passwd"; //XsiteWinRpt.ConnUtil.GetOnlyPasswordOfConnString(); //ConfigurationManager.AppSettings["DBPassword"];
//foreach (CrystalDecisions.Shared.IConnectionInfo connection in reportDocument.DataSourceConnections)
// connection.SetConnection(ConfigurationManager.AppSettings["DBServer"], "", ConfigurationManager.AppSettings["DBUser"], ConfigurationManager.AppSettings["DBPassword"]);
// connection.SetLogon(ConfigurationManager.AppSettings["DBUser"], ConfigurationManager.AppSettings["DBPassword"]);
foreach (CrystalDecisions.CrystalReports.Engine.Table table in tables)
TableLogOnInfo tableLogonInfo = table.LogOnInfo;
tableLogonInfo.ConnectionInfo = connectionInfo;
table.ApplyLogOnInfo(tableLogonInfo);
//reportDocument.Database.Tables[0].ApplyLogOnInfo(tableLogonInfo);

Attaching full code ... Our case is the RPT files are stored wih default parameters and saved data. We need to let users just refresh the rpt files with latest db data and overwrite with the same rpt files. But this code keep showing The application server failed mesg. when the refresh icon of viewer is clicked.
Attaching the code as it is not properly attached in my previous reply ...
=======================
Begin - aspx.cs code
=======================
using System;
using System.Data;
using System.Data.OleDb;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.CrystalReports;
using CrystalDecisions.Shared;
using CrystalDecisions.Web;
public partial class _Default : System.Web.UI.Page
    private ConnectionInfo connectionInfo = new ConnectionInfo();
    protected void Page_Load(object sender, EventArgs e)
        if (!IsPostBack)
            //ConfigureCrystalReports();
    protected void CrystalReportViewer1_Init(object sender, EventArgs e)
        ConfigureCrystalReports();
    private void ConfigureCrystalReports()
        string reportPath = Server.MapPath(@"Reports\Report1.rpt");
        this.CrystalReportSource1.ReportDocument.Load(reportPath);
        CrystalReportViewer1.Visible = false;
        SetDBLogonForReport(this.CrystalReportSource1.ReportDocument);
        foreach (ParameterField field in this.CrystalReportSource1.ReportDocument.ParameterFields)
            field.HasCurrentValue = true;
        //this.CrystalReportSource1.ReportDocument.Refresh();
        CrystalReportViewer1.ReuseParameterValuesOnRefresh = true;
        CrystalReportViewer1.Visible = true;
    public void ReportDocument_RefreshReport(object sender, EventArgs e)
        try
SetDBLogonForReport(this.CrystalReportSource1.ReportDocument);
CrystalReportViewer1.ReuseParameterValuesOnRefresh = true;
            this.CrystalReportSource1.ReportDocument.SetDatabaseLogon("user", "passwd", "server", "");
            foreach (ParameterField field in this.CrystalReportSource1.ReportDocument.ParameterFields)
                field.HasCurrentValue = true;
                field.AllowCustomValues = true;
                //field.EnableNullValue = true;
            this.CrystalReportSource1.ReportDocument.Refresh();
                   this.CrystalReportSource1.ReportDocument.SaveAs(@"C:\Inetpub\wwwroot\XsiteRpt\Reports\Report1.RPT", true);
        catch (Exception ex)
            Msg.Text = ex.Message;
    public void SetDBLogonForReport(ReportDocument reportDocument)
        Tables tables = reportDocument.Database.Tables;
        connectionInfo.ServerName = "server"; //ConfigurationManager.AppSettings["DBServer"];
        connectionInfo.UserID = "user"; //ConfigurationManager.AppSettings["DBUser"];
        connectionInfo.Password = "passwd"; //XsiteWinRpt.ConnUtil.GetOnlyPasswordOfConnString(); //ConfigurationManager.AppSettings["DBPassword"];
        foreach (CrystalDecisions.CrystalReports.Engine.Table table in reportDocument tables)
            TableLogOnInfo tableLogonInfo = table.LogOnInfo;
            tableLogonInfo.ConnectionInfo = connectionInfo;
            table.ApplyLogOnInfo(tableLogonInfo);
=======================
End - aspx.cs.code
=======================
=======================
Begin - Assemblies
=======================
<assemblies>
                    <add assembly="CrystalDecisions.Web, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Shared, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.ReportSource, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Enterprise.Framework, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.CrystalReports.Engine, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/><add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
      </assemblies>
=======================
End - Assemblies
=======================
=======================
Begin - aspx
=======================
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Xsite.aspx.cs" Inherits="_Default" %>
<%@ Register Assembly="CrystalDecisions.Web, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
    Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
    <title>Refresh Report</title>
    <link href="/aspnet_client/System_Web/2_0_50727/CrystalReportWebFormViewer3/css/default.css"
        rel="stylesheet" type="text/css" />
    <link href="/aspnet_client/System_Web/2_0_50727/CrystalReportWebFormViewer3/css/default.css"
        rel="stylesheet" type="text/css" />
</head>
<body>
    <form id="form1" runat="server">
    <div>
        <asp:Panel ID="PanelMsg" runat="server">
        <br />
        <asp:Label ID="Msg" runat="server" Font-Bold="False" Font-Names="Verdana" ForeColor="Navy"></asp:Label>
        <br />
        </asp:Panel>
        <asp:Panel ID="PanelViewer" runat="server">
        <CR:CrystalReportViewer ID="CrystalReportViewer1" OnReportRefresh="ReportDocument_RefreshReport" runat="server" AutoDataBind="True"
            EnableDatabaseLogonPrompt="False" EnableParameterPrompt="False" ReuseParameterValuesOnRefresh="True" HasRefreshButton="True" Height="820px" OnInit="CrystalReportViewer1_Init" ReportSourceID="CrystalReportSource1" ShowAllPageIds="True" Width="1215px" />
        <CR:CrystalReportSource ID="CrystalReportSource1" runat="server">
        </CR:CrystalReportSource>
        </asp:Panel>
    </div>
    </form>
</body>
</html>
=======================
End - aspx
=======================

Please help! Error -48 can't sync, tried everything!!

Hi
as above really, I have had my ipod 20gb clickwheel nearly 4 years and no problems, all of a sudden itunes has come up with this error message. I cannot take off or put songs onto the ipod, or move them around in playlists etc, but when not connected to my pc the ipod itself works fine.
Please help, I have tried most things such as unistalling itunes, error-checking the disk in my computer etc.
Has anyone got any other suggestions? I don't really want to restore the ipod as some of my music is not backed up, I manage it manually it that helps??

Use this microsoft installer cleanup tool to get reid of itunes, then quicktime.
http://support.microsoft.com/kb/290301
Then try a fresh iTunes install.

PLEASE HELP! Error Message When Trying to Publish Site

No matter how many of these errors I fix (edit the file and re-upload it onto the site), Muse comes up with a new error every time I try and publish. How can I resolve this issue, so I can publish my updated site. It should not be a problem with the files considering I have been able to publish the same files in the past...something is wrong with Muse itself.
PLEASE HELP!!@

Business Catalyst does not support special characters in file names (i.e. "&"). Through normal paths of placing or importing files, Muse will automatically alter the file names during publish to remove the special characters. The one exception path I'm aware of is an .oam file from Edge, where Muse doesn't have enough knowledge of what all is within the .oam package to safely alter the file names.
When the error occurs, is it always for a file that contains a special character in the file name?
How many files are being uploaded?
If you click "Resume" does the Publish process:
A) Proceeds and completes
B) Puts up the same dialog for the same file
C) Puts up a similar dialog, but for a different file
D) Other?
Thanks.

Please Help! Error message: Incorrect serial number, The serial number you entered is not valid. Click OK to retry serial number.???

My old PC crashed and died, and I am unable to deactivate the licence of Photoshop Elements 7.
I re-installed Photoshop Elements 7 via a trial download from Adobe website onto my new PC, Windows 8.1 single language.
My serial number is not accepted.
Error message: 'Incorrect serial number, The serial number you entered is not valid. Click OK to retry serial number'.
Customer help care is not helpful and keep ending my chat before I get a solution.
Can someone please help me and let me know how I can rectify this problem!!!

Thank you Benjamin MItchley. I reviewed the chat log and I can confirm that they are correct we do not provide installation support for Photoshop Elements 7 due to the age of the software title. Photoshop Elements 7 also does not support activation so there is no risk that you were unable to deactivate the software on your previous computer.
I am showing the serial number under your account was provided from an equipment manufacturer. It is possible there may have been a customized installer for that version. Have you contacted the computer manufacturer to obtain the installation files for the copy of Photoshop Elements 7 included with your computer?
Since you did not migrate/transfer over any files it is unlikely there is a software issue preventing the installation. You can try running the CC Cleaner Tool to ensure that no corrupt licensing files may be preventing the installation process. You can find details of the use of the CC Cleaner Tool at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

Connect by - sql help : getting error ORA-01489: result of string concatena

here is an sql query and I am trying to cook a decode but since there are many columns invloved when I am trying to run this I am getting the following error:
ORA-01489: result of string concatenation is too long
Any kind of help is appreciated, I need to get this going otherwise I am dead :(
Regards
Rahul
SQL:
select sys_connect_by_path(c.decode_prep,'-') decode_prep
from (select 'DECODE(BIAPPS_11.'||substr(b.all_cols,instr(b.all_cols,',',1,a.rn)+1,instr(b.all_cols,',',1,a.rn+1)-instr(b.all_cols,',',1,a.rn)-1)||','||'RAHULKALRA.'||substr(b.all_cols,instr(b.all_cols,',',1,a.rn)+1,instr(b.all_cols,',',1,a.rn+1)-instr(b.all_cols,',',1,a.rn)-1)||',''1'',''0'')' decode_prep, rownum curr, rownum -1 prev
from (select rownum rn
from dual connect by rownum <=
(select (length('ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM,CSCN_HIER1_CODE,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,SET_ID,TENANT_ID,X_CUSTOM')
- length(replace('ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM,CSCN_HIER1_CODE,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,SET_ID,TENANT_ID,X_CUSTOM',',')))+1 total_cols
from dual)) a, (select ','||'ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM,CSCN_HIER1_CODE,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,SET_ID,TENANT_ID,X_CUSTOM'||',' all_cols from dual) b) c
start with curr = 1
connect by prior curr = prev
order by length(sys_connect_by_path(c.decode_prep,'-')) desc
same as above sql only difference is here I am pulling the first record from the result set which above query returns :
select ltrim(replace(decode_prep,'-','||'),'||') decode_prep
from (select sys_connect_by_path(c.decode_prep,'-') decode_prep
from (select 'DECODE(BIAPPS_11.'||substr(b.all_cols,instr(b.all_cols,',',1,a.rn)+1,instr(b.all_cols,',',1,a.rn+1)-instr(b.all_cols,',',1,a.rn)-1)||','||'RAHULKALRA.'||substr(b.all_cols,instr(b.all_cols,',',1,a.rn)+1,instr(b.all_cols,',',1,a.rn+1)-instr(b.all_cols,',',1,a.rn)-1)||',''1'',''0'')' decode_prep, rownum curr, rownum -1 prev
from (select rownum rn
from dual connect by rownum <=
(select (length('ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM,CSCN_HIER1_CODE,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,SET_ID,TENANT_ID,X_CUSTOM')
- length(replace('ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM,CSCN_HIER1_CODE,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,SET_ID,TENANT_ID,X_CUSTOM',',')))+1 total_cols
from dual)) a, (select ','||'ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM,CSCN_HIER1_CODE,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,SET_ID,TENANT_ID,X_CUSTOM'||',' all_cols from dual) b) c
start with curr = 1
connect by prior curr = prev
order by length(sys_connect_by_path(c.decode_prep,'-')) desc)
where rownum = 1
Edited by: Mac_Freak_Rahul on Nov 28, 2012 1:31 AM : in the first sql ')'
removed after desc in the last line so now this query will run and throw an error.

Clearly your error is because the string concatenation you are doing with sys_connect_by_path is exceeding the 4000 bytes permitted by SQL.
In that case you need to concatenate your data into a CLOB datatype, for which you'll need a CLOB aggregation function...
create or replace type clobagg_type as object
text clob,
static function ODCIAggregateInitialize(sctx in out clobagg_type) return number,
member function ODCIAggregateIterate(self in out clobagg_type, value in clob) return number,
member function ODCIAggregateTerminate(self in clobagg_type, returnvalue out clob, flags in number) return number,
member function ODCIAggregateMerge(self in out clobagg_type, ctx2 in clobagg_type) return number
create or replace type body clobagg_type is
static function ODCIAggregateInitialize(sctx in out clobagg_type) return number is
begin
    sctx := clobagg_type(null) ;
    return ODCIConst.Success ;
end;
member function ODCIAggregateIterate(self in out clobagg_type, value in clob) return number is
begin
    self.text := self.text || value ;
    return ODCIConst.Success;
end;
member function ODCIAggregateTerminate(self in clobagg_type, returnvalue out clob, flags in number) return number is
begin
    returnValue := self.text;
    return ODCIConst.Success;
end;
member function ODCIAggregateMerge(self in out clobagg_type, ctx2 in clobagg_type) return number is
begin
    self.text := self.text || ctx2.text;
    return ODCIConst.Success;
end;
end;
create or replace function clobagg(input clob) return clob
deterministic
parallel_enable
aggregate using clobagg_type;
SQL> select trim(',' from clobagg(ename||',')) as enames from emp;
ENAMES
SMITH,ALLEN,WARD,JONES,MARTIN,BLAKE,CLARK,SCOTT,KING,TURNER,ADAMS,JAMES,FORD,MILLER
SQL> ed
Wrote file afiedt.buf
1 with t as
2    (select 'PFL' c1, 0 c2,110 c3 from dual union all
3     select 'LHL', 0 ,111 from dual union all
4     select 'PHL', 1, 111 from dual union all
5     select 'CHL', 2, 111 from dual union all
6     select 'DHL', 0, 112 from dual union all
7     select 'VHL', 1, 112 from dual union all
8     select 'CPHL', 0, 114 from dual union all
9     select 'WDCL', 1, 114 from dual union all
10     select 'AHL' ,2 ,114 from dual union all
11     select 'NFDL', 3, 114 from dual)
12 --
13 -- end of test data
14 --
15 select trim(clobagg(c1||' ')) as c1, c3
16 from (select * from t order by c3, c2)
17 group by c3
18* order by c3
SQL> /
C1                                     C3
PFL                                   110
LHL CHL PHL                           111
DHL VHL                               112
CPHL AHL NFDL WDCL                    114

Urgent ..Please Help .Geting error URI too long

I have a jsp page and it has a text area. When I am inputing shorter
text it works fine but when I am putting longer text I am
having an error that "Get is not defined" and in the http server error
log I am getting URI too long error.
The text area when submitted...supposed to invoke a servlet which(the servlet) will do some error checking on the input text.
How can i overcome this limitation of http server ?
Please help ...
Thanks.

I tried with post method but still get the error.
Here is my jsp code..
<form name="inputnews" method="post" action="validation">
<table>
<tr>
<td width="600"><img src="//www.ibm.com/i/c.gif" width="600" height="4" alt=""/>
</td>
</tr>
and here is the servelet(name validation) code:
public void doPost(
     javax.servlet.http.HttpServletRequest req,
javax.servlet.http.HttpServletResponse resp)
     hrows javax.servlet.ServletException, java.io.IOException
          System.out.print("i am in post");
          HttpSession session = null;
          String flag3 = "";
          String check = "checkok";
          Info info = null;
          String category = req.getParameter("category");
          String title = req.getParameter("title");
          String content_area = req.getParameter ("content_area");
*** the content_area is the text area where user put long input
Anything i am missing here ?

Please help app error 523

ive got a bb pearl 9105 and everytime i turn it on its come up with error messages then comes up with a white screen that says error 523. i cant plug it into my comp as the charge port is broken and cant get rid of the error messages to activate the bluetooth.
anyone could any ideas?? ive tried reseting it, taking battery, sim,memory card out and nothings doing the trick...please help...

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB24395 "Error 523", "App Error 523", or "JVM 523" appears on the BlackBerry smartphone
Unfortunately, the actual remedy may well require connection to your computer...but with the port broken, that won't be possible. So you won't be able to fix this without seeking formal hardware-level support.
If you remain in warranty, you should seek out support via that channel. If you have no warranty, then you would seek out a local (to you) shop with qualified BB hardware technicians who can give you a proper diagnosis and estimate.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Please help! error -61399, how to create custom vi for every input in project explorer

Please help! I have been trying whole night but couldn't get through it.
I am creating custom vi to simulate cRIO inputs on development computer. ( FPGA target>>execute vi on>> development computer>>custom vi) I then follow tutorial creating test benches:
Tutorial: Creating Test Benches (FPGA Module)
but when I run fpga vi I get error -61399, input item/node is not supported (input item/node is my input which I've added from project explorer).
The closest I got in my research on why this error is occuring- I have not connected all inputs/outputs in project explorer to custom vi. I followed tutorial exactly step by step but still I couldn't get through it.
Please help! Please help!
In order to do further investigation, I converted custom vi to a state machine , please find attachment. Having highlight execution on, it clearly demonstrates that input in cRIO are not being selected as a result default cases execute.
Please find attached modified custom vi with state machine, fpga vi, and original custom vi.
Best regards
Ta
Attachments:
custom vi.vi ‏32 KB
inverter.vi ‏16 KB
original custom vi.vi ‏22 KB

Solution:
You will see this error if no Custom VI has been selected or the Custom VI has not been configured for every I/O item that you are using in your FPGA code???
I think that's exactly where I'm stuck!
How do I configure it for inputs??? My attachement show that I have done everything being asked in tutorial!
Thanks!

Please Help unknown error

I just finished redesigning my website www.thelostsheepcompany.com and I did a preview in browser from Muse to check out the functionality and layout and everything worked seamlessly. however once I published it, it now comes up with this error: MuseJSAssert: Error calling selector function: Error no such interface supported on the contact us page (Contact Us) and the ministry registration page (Ministry Registration). I have no idea why this is happening. PLEASE HELP!!!

Hello,
It could be because of many reasons like conflict of any code with the form etc. If you have the back up file from the time when it was giving issue, we can check it for you and let you know the exact issue.
Regards,
Neha

Please help : small error

I have this piece of code . I am getting error that
use of loop variable 'i' is invalid.
Please help
CREATE OR REPLACE procedure A
is
v_commit_count number(10);
v_wf_id number(8):= 20001;
v_atlanta_operator number(8);
cursor c1 is
select * from customer_query_progress;
type temp_c1 is table of customer_query_progress@slpmig1%rowtype
index by binary_integer;
t2 temp_c1;
procedure do_bulk_insert is
begin
forall j in 1..t2.count
insert into customer_query_progress@slpmig1 values t2(j);
commit;
t2.delete;
k:=0;
end do_bulk_insert;
begin
select value into v_commit_count from t2_system_parameter where name='batch_size';
select value into v_atlanta_operator from t2_system_parameter where name='atlanta_operator';
for i in c1 loop
k:=K+1;
t2(k).customer_query_id:=i.CUSTOMER_QUERY_ID;
t2(k).last_modified:= i.LAST_MODIFIED;
t2(k).PROGRESS_SEQNR := i.progress_seqnr;
t2(k).OPEN_QUERY_IND_CODE:=i.OPEN_QUERY_IND_CODE;
t2(k).WORK_FORCE_ID:=v_wf_id;
t2(k).OPEN_DATE:=i.open_date;
t2(k).RESPONSE_DUE_DATE:=i.RESPONSE_DUE_DATE;
t2(k).PROGRESS_TEXT:=i.progress_text;
t2(k).ACTION_DATE:=i.action_date;
t2(k).ACTION_TEXT:=i.action_text;
t2(k).ATLANTA_OPERATOR_ID:=v_atlanta_operator;
t2(k).RESOLUTION_TEXT:=i.resolution_text;
if mod(k,v_commit_count)=0 then
do_bulk_insert;
end if;
end loop;
do_bulk_insert;
end;

You have to declare and initialize k (to zero, I think):
CREATE OR REPLACE procedure A
is
k pls_integer := 0;
Regards,
Gerd

Please Help ------SVRMGR -ERROR - ORA-12538

Similar Messages

Maybe you are looking for