Please help:System keeps rebooting after Bios flash update

Hello,
Ok for starters I have the K9A2 CF motherboard,4GB of ram,My last Bios was 1.8.
I was flashing to 1.9 using the bios flash tool and a usb 1GB stick.The Bios flash went without errors and I rebooted.After this I booted back up.It gets to the 512Mb on the screen then poof,the system reboots automatically and keeps doing so thereafter unless I shut the PC off.How can I restore my Bios or fix this issue.This is not good as I  cant even get to the post screen before it reboots to change anything.
Thanks,
K9A2 CF board
Windows Vista 64
4GB  Corsair ram
80GB Stata HD
200GB IDE HD
DVD-RW Drive

Quote from: soldat32 on 06-August-09, 05:16:16
CPU Type   QuadCore AMD Phenom, 2500 MHz (12.5 x 200)AMD Phenom X4 9850 Quad Core Processor HD985ZXAGHBOX - Black Edition, Unlocked 2.50GHz, 4MB Cache, 2000MHz (4000 MT/s) FSB, Agena, Quad-Core, Retail, Socket AM2+, Processor with Fan
No errors were found in my memory.My PSU seems to be working fine.My VGA is a XFX Nvidia 9600GT with 512mb.
Have you tried that?:
Quote from: Svet on 06-August-09, 03:52:32
Try with your second stick alone in the same DIMM slot.
Quote from: soldat32 on 06-August-09, 05:16:16
CPU Type   QuadCore AMD Phenom, 2500 MHz (12.5 x 200)AMD Phenom X4 9850 Quad Core Processor HD985ZXAGHBOX - Black Edition, Unlocked 2.50GHz, 4MB Cache, 2000MHz (4000 MT/s) FSB, Agena, Quad-Core, Retail, Socket AM2+, Processor with Fan
Its 125W CPU.
Can you shows picture of your board? Is it V2? Is there a heatsink over mosfets?:

Similar Messages

  • PC Keeps rebooting after Toshiba Bluetooth update

    After being notified by the Toshiba program to update a Bluetooth application I'm not able to get in to windows.
    After installing the update I keep getting a message that there's a problem in windows and need to reboot.
    Unfortunately rebooting just gets me back to the same error message.
    Anyone knows a solution?

    Re: User Profile Cannot be Loaded ( The User Profile Service failed the sign-in )
    Hi,
    I had almost same problem, see stated above subject.
    I cannot sign-in since I had a password then I dont have any administrator, this started during everytime i opened it it states Line 0 (File"C:\Google\googleupdate.a3x") error then I try fixing it by following these instructions
    Follow below steps to get rid of this error
    Press Win+r,
    type regedit and enter.
    Now press ctrl+f,
    type googleupdate.lnk
    and hit find.
    Windows registry search and show detect entries under
    HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Run
    and
    HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\Run
    path just delete it and hit find to found next.
    After that I cannot signin when I attempt to login
    Please help .

  • 6710b keeps rebooting after bios upgrade

    I flashed the bios of my 6710b notebook.  Now I get the message "The bios failed to complete the update.  Please ensure that you follow the correct proceedures and try again.  This may require two sequential updates to complete the process." The machine continually recycles giving me the same message.  I have downloaded the bios but I can never get to it on the CD or flash drive because the machine restarts before it can initialize.  I tried using the Windows key + B. I also tried removing the CMOS battery.  Does anyone have any other suggestions?

    Removing the CMOS battery will not help. That option went away about six years ago.
    You can download the BIOS softpaq, extract it  and put it on the usb flash drive by using a different Windows PC.   
    Follow the instructions in the document on the following HP URL.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=nl&lc=nl&dlc=nl&docname=c02693833
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • 13.3 Macbook Pro Retina Keeps rebooting after recent iTune updates

    This morning after I installed the new iTune updates (11.2.?), the macbook pro just flashed with some color stripes and then screen went black. I need to long hold reboot key to turn it off and turn it back on.
    My iPhone was connecting with the Macbook during the update. I am not sure if this is connected to the issue. I unplugged iPhone and rebooted the Macbook. But right after I log in, the color stripe things came again and the macbook went dead. Now it is stuck in this status. I think I need to bring it to the apple store and have the "genius" guys fix it
    updates: I waited for a while and reboot it. Now it seems working...

    This morning after I installed the new iTune updates (11.2.?), the macbook pro just flashed with some color stripes and then screen went black. I need to long hold reboot key to turn it off and turn it back on.
    My iPhone was connecting with the Macbook during the update. I am not sure if this is connected to the issue. I unplugged iPhone and rebooted the Macbook. But right after I log in, the color stripe things came again and the macbook went dead. Now it is stuck in this status. I think I need to bring it to the apple store and have the "genius" guys fix it
    updates: I waited for a while and reboot it. Now it seems working...

  • KT4V-L rebooting after bios

    My system keeps rebooting after the bios screen, before windows loads. ?(  ?(
    XP2600+ (333 fsb)
    PC2100 DDR - 512mb
    32mb x2/x4 AGP
    I'm NOT overclocking,
    Could it be the AGP card, don't know if it's 1.5v or 3.3v?
    Could it be memory - perfectly fine in my previous system?
    Could it be a power issue - again, fine b4?
    Faulty mobo or processor?
    PLEASE HELP!!!!
    Thanks
    Craig

    Hi..
    Interesting... Could be many resons..
    1) VGA - NOT VGA.. If it was 3.3V AGP then u cant plug it into the slot.. And even if u did, it will not initalize
    2) Memory - Not likely.. But cannot be compleatly ruled out.. What sort of memory do u have.. Generic???
    3)Power - Quite possible.. This new VIA and NVIDA chips eat up power.. Check out the articles written by BAS to c whether u system has enough power
    http://www.msi.com.tw/program/service/forum/index.php?threadid=1515&boardid=16&styleid=1&sid=51dff848cbbfeaf7aba02fb2086ac1a0
    http://www.msi.com.tw/program/service/forum/index.php?threadid=1135&boardid=16&styleid=1&sid=51dff848cbbfeaf7aba02fb2086ac1a0
    4) Faulty Processor/MB - Unlikly, though cannot be ruled out
    5) FAULTY COOLING - Highly probable.. Check whether u have installed the cpu cooler properly..
    6) Cable Connection - Check the cable connections
    Hope this information helps
    Regards
    Rasika

  • System keep rebooting

    my system keep rebooting after i start a game and the voltage warning of +3.3V keeps alerting me.. and i dunno what to do with it.. can anyone help me ?? is it that its time i should change the PSU? thanks!!:huh:

    Quote from: Surv1v0r on 01-June-06, 23:08:21
    You need to provide more information about your system - particularly the Power Supply Unit (PSU) & Motherboard (MoBo) - until you do, you aren't going to get anywhere.
    Read some of the details on other people's postings and signatures and try again.
    mobo is k7N2 Delta series
    PSU is 400W
    1.5GB of RAM PC2700 DDR
    AMD 2500+
    GeForce 6600GT
    showing this blue screen
    STOP: 0x000007E (0xC0000005, 0x00000000, 0xF78BEACC, 0xF78BE7CC)
    dunno what it is..
    something to do with video adapter.. thats what i read..

  • NF980-G65 not responding after BIOS Flash

    Before we start I do admit this is my first computer build and I have a feeling that I will have to RMA this board because of the M-Flash disaster.
    Mobo: NF980-G65
    CPU: AMD Phenom II X6 1090T
    RAM: G.SKILL Ripjaws Series 4GB (2 x 2GB) F3-12800CL7D-4GBRM
    Power Supply: CORSAIR Professional Series AX1200
    HD: Crucial RealSSD C300 CTFDDAC128MAG-1G1 2.5" 128GB
    Video: Onboard for the time being
    Basically after fidgeting with the bios for 2-3 hours I found that I was running version 1.1 so I made an attempt to update my bios to 1.4 because in 1.3 they added support for 6 core processors.  Well after I forced flash it wont display video at all or power any USB devices.  I believe the error message before I flashed it was something like ROM ID miss match?  Any suggestions?

    I do just have one quick question.  I was planning on using the >>MSI HQ Forum USB flasher<< to update my BIOS on the new board that I am receiving after the RMA.  However I noticed that in the Preconditions & System Requirements it said that Quote
    The main precondition for using the tool is a working & healthy Windows installation on the system that needs the BIOS flash.
    Is there anyway to update the BIOS on the board with no windows install on that system?  The problem is that I cant install windows because the board won't recognize my CPU.  Any recommendation would be great... Thanks again for your help!

  • Please Help! I tried to upgrade Flash Player, but have older computer

    Please Help! -- I tried to upgrade FLASH PLAYER, but I have an older MAC laptop OS X 10.4 = Version 4.1.3 (4533.19.4). 
    I need to UPGRADE Flash Player; however it's not available -- Recently, I cannot watch some videos or access particular websites.
    I'm a teacher, and CAN'T AFFORD to buy  a new computer at this time.
    > Can Adobe Corp. please help by offering an expanded range of UPGRADE support ??

    Unfortunately, if you're running OS 10.4, odds are that your Mac is a PowerPC model (-About This Mac will let you know for certain), and the newest version that will run on your system is Flash Player 10.1.102.64 and 9.0.289.0 (126 MB)
    That's a direct link to the download, you can right click (or control+click) and save it to your downloads folder. Expand it with Stuffit Expander and run the 10.102.64 installer.
    That's the best that can be hoped for because if your Mac is PowerPC, and I suspect it is, even Apple no longer supports it since September of 2009. The next OS X version (10.5) won't run the latest Player either. You'd need an Intel Mac with 10.6.3 or newer to use Flash Player 11.8.800.94.
    PowerMax does have some really good deals on "pre owned" Macs. I've bought three from them myself over the years.

  • Iphone keeps rebooting after slide to power down?

    Help! My 4S iphone keeps rebooting after slide to power down?

    iPhone 4s.
    iOS 5.1.1
    When USP charging cable is connected to both the live wall charger and iphone,
    the iPhone will succesfully 'Slide to Power Off'.
    When the USB cable is not connected the following:
    1. Hold down power button until "Slide to power off appears".
    2. Slide the slider.
    3. Iphone gets the spinny wheel.
    4. Screen goes dark for a second.
    5. Apple logo then appears and the iphone eventually turns back on.
    6. No Apps are installed on this 4S.
    7. Restored on iTunes several times, No change.
    8. Changed USB Cable, No change.
    9. Cleaned Connector port w/ brand new, Clean, soft tootbrush, No change.
    10. Blown clean air into the connetor, No change.
    Any New developments / suggestions?????????????

  • Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • How do I cancel the distance between the numbers? I'm having trouble copy phone numbers from the phone book and send it via SMS This problem I've found in the Arabic language, numbers appear in reverse Please help System 6.0.1

    How do I cancel the distance between the numbers?
    I'm having trouble copy phone numbers from the phone book and send it via SMS
    This problem I've found in the Arabic language, numbers appear in reverse
    Please help
    System 6.0.1

    MPEG-4 should not be used in FCP unless it is converted first or optimized in the application.
    Trash your preferences. Trash your project render files. Switch off background rendering. Do not re-render. Export your projects.
    Ignore the last frame and first frame indicators.

  • Please Help , I Need semicolon ; after TABLESPACE "MFEED_DATA"

    Hi All,
    please Help , I Need semicolon ; after TABLESPACE "MFEED_DATA"
    as I am getting ; like below example
    select dbms_metadata.get_ddl('TABLE', 'A') || ';' As Result
    from dual;
    CREATE TABLE "MFEED"."A"
    (     "A" NUMBER
    ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
    TABLESPACE "MFEED_DATA"
    regards,

    Hi,
    well, I don´t know if this works for any table, but I tried two of mine and it was ok:
    select substr(dbms_metadata.get_ddl('TABLE', '<table_name>'), 1,
    length(dbms_metadata.get_ddl('TABLE', '<table_name>') || ';')-4)|| ';' As Result
    from dual;
    If the string gets too long, you must use dbms_lob - functions for string manipulation, but for "normally sized" tables, it should work.
    Regards,
    Gerd
    Message was edited by: Gerd
    OK, Jens has the perfect solution - forget mine!
    gerd_99

  • Please help.  Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

    Please help.  Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

    Sara,
    Please see my answers in bold below.
    What browser are you using? Try clearing the cache, or using a different browser. N/A
    Are you converting from within Reader, or directly via the ExportPDF website. Within Reader.I disabled the OCR and this did not work either. Try converting from within Reader, and disable OCR as detailed in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel.
    Are you on a networked computer? Make sure that there aren't any firewall/proxy settings that are preventing you from uploading files to the Internet. Not having problems uploading the file--that works fine.
    Make sure the file is within the file-size limit of 100 MB. It is <40.
    I get the error message, "File failed to be converted using Adobe ExportPDF online."
    Thanks for your help in advance.

  • HT202157 My Apple TV keeps rebooting after it did the up date

    My Apple TV keeps rebooting after the new roads were down down

    The update didn't apply correctly, you will need to restore
    Restore your Apple TV (2nd and 3rd generation) - Apple Support

  • Firefox keeps crashing after the recent update. how can i fix this, its doing my head in.

    firefox keeps crashing after the recent update. how can i fix this, its doing my head in.

    Hello, Please make sure to get a fresh copy of Firefox from
    http://www.mozilla.org/en-US/firefox/all
    Have a nice day

Maybe you are looking for