Please help this is driving me nuts!!

I have the 8320 with os 4.5 and have only had it for a few days,I am trying to download app world but I can't. It wont let me download to desktop,it says;downloads via USB are not enabled for this product and when I try and download it through my blackberry browser it says my device does not meet the system requirements that are needed to support blackberry app world.??? I don't no what to do,please help.

Hi and Welcome to the Forums!
The second symptom you describe is the most telling -- see this page:
http://na.blackberry.com/eng/services/appworld/download.jsp#tab_tab_system_requirements
Make sure you fully meet all requirements -- you might have to contact your carrier to be sure since one of the requirements involves them. I suggest contacting them and asking them very specifically if your current service plan allows you access to AppWorld.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Someone please help this thing driving me nuts lol

ok here is the problem,,, i got my ipod shuffle for xmas, was working good until something crashed on my harddrive i had to format harddrive , now itunes is not seeing that i have a ipod, my computer is because when i plug it in says "to safely remove hardware". I think lost all music on it which is fine as long as i can get it to work again.. i tried to use the ipod updater and it just says initializing and doesnt do anything else.. when i clici on the battery to see if it is charged nothing at all happens, but on the front the green light lights up when i push a button... i know surely it cant be the battery as i have only used this for less than a month and then only used it on 4-5 occasions b4 i had all these problems..

Hi and Welcome to the Forums!
The second symptom you describe is the most telling -- see this page:
http://na.blackberry.com/eng/services/appworld/download.jsp#tab_tab_system_requirements
Make sure you fully meet all requirements -- you might have to contact your carrier to be sure since one of the requirements involves them. I suggest contacting them and asking them very specifically if your current service plan allows you access to AppWorld.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I have an iphone 4. since upgrading the software the info i update in my iphone doesn't sync with my calendars and contact in Entourage, or anywhere on my macbook pro. please help, this is driving me nuts.

How can i transfer the new info on the iphone back onto my computer. it used to do it no problems, now nothing!

On the MacBook, go to System Preferences > Security & Privacy > Privacy > Advanced > Disable remote control

ICloud is registered to old iTunes account, how can I delete this account off my phone? It won't let me log out or delete icloud and I can't remember my password or security questions. Please help as its driving me nuts!

Hi there Apple Community!
I have a problem with my iCloud - it is registered to my old iTunes account (old work e-mail that doesn't work anymore) and I can't remember my password or security questions, argh.
Can someone help me delete my iCloud from my phone without restoring my phone as its driving me nuts!
Many thanks in advance.

Paulini88!!! wrote:
Hi there Apple Community!
I have a problem with my iCloud - it is registered to my old iTunes account (old work e-mail that doesn't work anymore)
Then update it to new email address. Creating a new AppleID is usually not a good thing as anything on your old account will not be transferred to your new account.
See this -> Change your Apple ID - Apple Support
and I can't remember my password or security questions, argh.
So reset them...
See this -> If you forgot your Apple ID password - Apple Support
Can someone help me delete my iCloud from my phone without restoring my phone as its driving me nuts
Restoring it will not delete it.
You need to turn it off (Settings > iCloud - Delete account then re-enable it with updated AppleID.
This is the ONLY way you can do it.

How do i filter recordsets using session variable??? Please help this is driving me mad...!!

I am having the same problem as user "Gabe the animator" in a post sent in 2007.
"my recordset that drives a dynamic table won't filter results based on a session variable. I know session variables are working because I have the session variable echo on the page (dragged-n-dropped my session variable from the Bindings panel to my page), and that works fine. So why can't I filter my recordset with the same session variable???"
here is the code:
<?php require_once('Connections/mockconn.php'); ?>
<?php
session_start();
?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
if(!session_id()){
session_start();
$colname_info = "-1";
if (isset($_SESSION['email'])) {
$colname_info = $_SESSION['email'];
mysql_select_db($database_mockconn, $mockconn);
$query_info = sprintf("SELECT name, last_name, email, password FROM registration WHERE email = %s", GetSQLValueString($colname_info, "text"));
$info = mysql_query($query_info, $mockconn) or die(mysql_error());
$row_info = mysql_fetch_assoc($info);
$totalRows_info = mysql_num_rows($info);
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>home</title>
</head>
<body>
<div id="info">hello <?php echo $row_info['']; ?></div>
<?php
if (isset($_SESSION['email'])) {
          echo 'your email: '.' '. $_SESSION['email'] .' '.'good job';}
                    ?>
</body>
</html>
PLEASE PLEASE HELP.... I have been at this for day's...
how do I get the record set to filter based on the value of the session variable

Sorry I forgot to mension the error I am getting?
( ! ) Notice: Undefined index: in C:\wamp\www\mock\home.php on line 59
Call Stack
Time
Memory
Function
Location
1
0.0093
389024
{main}( )
..\home.php:0
Why is this error coming up?

Please help this is driving me mad!!!!!!!

Guys,
I really need your help!!!
when my computer is running at stock speeds or overclocked to 2.4ghz as per my sig my raid array works fine and boots into windows. But as soon as i over clock over 2.4ghz my raid array dissapears, i know my chip can go higher because before i moved to a raid array i ran it at 2.5 ghz 250x10 HTT @ 4, mem on a 166 divider with no problems. BTW i have updated to sygar's 1.9 modded bios (that rocks mate gj) The momory is 2x512 of corsair value select which runs in my machine at 2.5 3 3 6 think its rated at 3 3 3 8 though.
Can anyone help me i want the most from my chip but i also want to use my raid array.
Please help as i am sure this should be possible

Well.... more than likely when you are overclocking, you are pushing your PCI bus speeds way out of whack. Many controller type cards (built in or not) don't like having the PCI bus more than 3-4Mhz faster than 33Mhz. Use the clockgen utility or whatever program you like to see what your PCI bus speed is at your current settings, then look and see what it would be at 2.5Ghz.
Good luck!
Merrell

Camera Raw (8.7.1) is lagging, adjustment brush esp erratic, running on a Macbook Pro (Yosemite 10.10.1) Please help it's driving me nuts!

Hi, Camera Raw keeps stalling / freezing and then doing erratic catch up. It's driving me mad and has made production levels practically zero. Please help!

In a nutshell: Yosemite is a work in progress and full of bugs. Apple doesn't get a major release right until the dot five update or so. Yosemite has a long way to go till it gets to OS X 10.10.5.
Many users have been advised to downgrade to Mavericks.

I lose firefox when it updates mcafee is allowing full access can get firefox 3.5 it asks me to update which I do but then when I go into it again it goes back to 3.5 saying need update. Please help me its driving me nuts

Hi. We had Firefox 5 (I think) but when it updates itself we lose connection. I contact Mcafee who said that Firefox is not being blocked by Firewall but has full access and to contact you.
Have gone into the old version we had 3.5 (which I CAN access) and it tells me for safety to install new version which I do but then I cannot get into it. Hope this makes sense as am PC idiot. Please help. Thanks

http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Can anyone please tell me why the "Do you want to restart your computer now" window keeps popping up every two minutes? Please help! Its driving me nuts?

Hi all.
I need some help. I have recently installed a new Hard Drive in my Macbook and have re-installed Snow Leopard. Since doing so there have been a few things that haven't been quite the same.
1) Certain buttons decided they didnt want to work anymore. These being the Space Bar, the Tab key, all four arrow keys, Caps lock, Volume up, Eject, and a few others.
After putting up with this for a couple of weeks and looking at numerous forums, they all of a sudden came back to life (Hence why I'm actually able to type this message) THEN, they packed up again. Then started again, then packed again, and so on. They seem to have a mind of their own.
Please... does anyone know whats going on? Is it a hardware prob? Is it something to do with the way Ive installed the Hard Drive? Have I forgotten to do something?
2) Ever since my buttons initially came back to life, the "Do you want to restart you computer?" window keeps popping up every couple of minutes.
It's the window that says "Restart, Sleep, Cancel, Shut Down"
It's driving me insane and I can't help but think that the two probs are related.
If anyone out there has any ideas at all, they would be most welcome.
Many thanks in advance
MadDogSnaps

Have you tried reinstalling the original drive? Same symptoms with it?

Please help, this is driving me crazy

I bought a new song just to use as a ring tone on my iphone and it wont let me create it.
I made sure i'm signed in, have the view ringtone setting enabled, and
have the latest version of itunes.
the error i get is " This song cannot be made into a ringtone
nothing hurts by various artists can no longer be made into a ringtone" and this happened with any song i purchase from itunes

pls consider stating the actual specific issue in the Title of your post - people tend NOT to take the time to read a post that says 'Has this happened to you?' or the like - so your more likely to be viewed if you be more specific. Generic 'help, how do you fix this?' type titles are getting old for the rest of us as well. Thanks.

PleASE PLEASE HELP THIS IS DRIVING ME MAD

This should be so simple, all I have is a java class which I need is used
to ax a oracle db and returns a recordset.
1st q do I need to reg this class or does web logic look in a specific area
and reg them automatically.
2nd question I have a jsp page that simply imports java.sql when access the
page I get an error
stating it does not recognise Recordset, as thou it has not imported the
Java.sql??????????????????

"Manuel" <[email protected]> wrote:
This should be so simple, all I have is a java class which I need is used
to ax a oracle db and returns a recordset.
1st q do I need to reg this class or does web logic look in a specific area
and reg them automatically.
2nd question I have a jsp page that simply imports java.sql when access the
page I get an error
stating it does not recognise Recordset, as thou it has not imported the
Java.sql??????????????????
Recordset is new to me.
I generally use ResultSet to get the data.
import java.sql.ResultSet;

Installed iOS 5.0 and wifi will not stay up on my phone and only way to reset it is power reset my wireless router? Please help this is driving me mad!!!!

Have iPhone 4 just installed iOS 5.0.1 and wifi will not
Stay up on my phone even though router is 10 feet away
And cannot recover wifi except by resetting router never. Asks for
PW etc? Plus battery life is reduced on this iOS?

Try a SMC reset:
http://support.apple.com/kb/HT3964
Try a NVRAM/PRAM reset:
http://support.apple.com/kb/HT1379
If no joy, take it back, and take full advantage of your warranty!
You also may want to let Apple know about this as well:
http://www.apple.com/feedback//
I wish you the best

Hi everyone. I am trying to download ML on my iMac and when I click the download button, I am asked for my PW which I provide and then the ML icon launches in launchpad but nothing takes place. Have been trying for 2 days and this is driving me nuts. Help

Hi everyone. I am trying to download ML on my iMac and when I click the download button, I am asked for my PW which I provide and then the ML icon launches in launchpad but nothing takes place. Have been trying for 2 days and this is driving me nuts. Help

Yes it does and there is an indication that the software is downloading but after a few hours, it just stops without any error message. Everything simply disappears and I need to start over again. I have a superfast connection so it should no be this slow. Everything worked fine on my MBP and I am in the same place. Any ideas

W henever I try to open an Adobe file I get this message: Adobe Reader could not open ....because it is either not a supported file or because the file has been damaged. This is driving me nuts. Can I purchase somethine from Adobe that will allow me to op

Whenever I try to open an Adobe file I get this message:
Adobe Reader could not open ..... because it is either not
a supported file type or because the file has been damaged
(for example, it was sent as an e-mail attachment and wasn't
correctly decoded). This is driving me nuts !! Is there an Adobe
product that I can purchase that will make my Adobe Reader
work??? Right now it is useless to me and I have an important
download taht was sent as an Adobe download file and after
I downloaded the file Adobe Reader refuses to open it.
Please Help!!!!

I am having the same problems!!! How can a person get help from ADOBE? Or do I cancel and find a different program for converting.

This is driving me Nuts routing question

Okay...here is what i am trying to do:
I am trying to use a hardware device, as an efects unit. I want to be able to apply the resulting processed outgoing signal, to my master mix.
I am following the instruction in the manual for the Hardware unit, which is an effects unit that also functions as VST plug in. I have discovered that the VST part of it, simply allows you to control the dials via a software interface, but that the hardware unit itself, still has to be routed in and out of Audition.
Here is my hook up so far:
I have a dry vocal track in track 1 on my multi tracker.
It is routed to Bus A
Bus A, is routed to outgoing port 3 on my sound card, which carries sends the track to the hardware effects unit.
The processed track comes back through the SPDIF In, on my sound card.
Thus, Track 3 on my multi track window, takes In the SPDIF
Track 3 is also routed out to the Master track
Herre is the net reswult:
The signal gets processed correctly. The wet version comes into track 3 as expected. I can record it onto track 3, if I wish.
But despite the fact that track 3 is routed OUT to the Master, the Master track does not seem to hear track 3. Thus, I cannot rout the processed track to the master mix for mixdown.
My goal is to be able to create a mixdown which would include the processed sound from track 3, but I can't figure out how to make the processed sound go to the Master track, so that it can becoem part of the mix.
Here is a picture of the audition mixer window. Please scroll to the far right of this picture, as I have a dual monitor and the left side is is what i am typing..the right side is the mixer pic.
(ignore track 2...it does nothing)
www.musicfusion.us/collabs/route.JPG
This is driving me nuts. Any help would be very much appreciated.
Thanks you

>But despite the fact that track 3 is routed OUT to the Master, the Master track does not seem to hear track 3. Thus, I cannot rout the processed track to the master mix for mixdown.
Assuming that I've understood you correctly:
AFAIK, that's quite correct; you can't add a live source to a mixdown. You can determine what you hear by altering the overall monitoring settings (Audition mix, external), but I'm pretty sure that you can't add a 'live' anything to an actual mixdown
process, simply because this is based on file manipulation. So, you have to record it first. And anyway, even if you could do what you want, the timing would be all over the place.

Please help this is driving me nuts!!

Similar Messages

Maybe you are looking for