Please help this is really annoying..
Two itunes, two PC's, one Ipod.
how can i transfer songs on my ipod from a different pc to a new pc with a different itunes.
There is no way to get music from iPod to iTunes (without third-party software). However, you can go iTunes to iTunes. Do you have any way of getting files from one computer to another other than your iPod? (maybe you have a flash drive, cd's, home network, etc.)
Similar Messages
-
like it says thats what happens. I load a page and i get a message saying "2" its annoying because i have to press okay to contuie. plz help.
This is caused by the InternetEngine - Powering Applications! extension. If you uninstall that extension it should stop this happening.
https://support.mozilla.com/kb/Uninstalling+add-ons -
I have updates on my iPad but when I try to perform the updates it will not continue the process. It starts then it fails I have 16 updates. This is so annoying because every time I look at my iPad I see those stupid update messages. Please help I'm about to lose it!
Are you connected to wifi? Are the updates for the apps for ios 7.0.3? If they are then try updating your ipad then going in and updating your apps.
-
pleas ehelp me fix this problem I am unable to update my Iphone or Ipad because of this.
Hi, I get the same error EVERY time iTunes updates.
I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
My Question:
Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
Thank You,
Steve -
Please help this is quite annoying for me
Hi,I have been having problems when I go to sync my Ipod It says it is copying some of my songs, about the last however many I have purchased since a couple of months ago. I am curious as to why it is only the recent songs that are copied, but anyways then they end up duplicated on my Ipod but not in Itunes. I have been deleting them off of my Ipod manually but every time I buy a new song and resync it there is just that many more duplicates I will have to delete. I am just wondering if there is a way to stop it from copying songs and making duplicates on my Ipod, possibly without having to restore my Ipod. Thanks
Providing the songs play in iTunes on the computer
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I've tried Turning off "Show All Music" and then swiping left on the song to delete it, but it wont give me the option to delete the songs. Please help. (this is iOS.7 btw) It only does this for some of the songs, but the rest of them I can delete. This is really annoying, please help me ASAP. Thank yall for your time
I've tried Turning off "Show All Music" and then swiping left on the song to delete it, but it wont give me the option to delete the songs. Please help. (this is iOS.7 btw) It only does this for some of the songs, but the rest of them I can delete. This is really annoying, please help me ASAP. Thank yall for your time
-
How can I cancel my adobe subscription? I am in the trial period and cannot get any assistance online. This is really annoying.
Hi tokhouse,
Please refer to the help document below:
Cancel your membership or subscription | Creative Cloud
In case of any issues, please contact the support:
Contact Customer Care
Regards,
Sheena -
Please help this is very unusual!
Ok this is really annoying. My IPhone battery was low today so I hooked it up to my computer, for some reason I don't use the wall charger very much. When I hooked it up today, ITunes said it couldn't read the phone and recommended I do a restore. I did and now it seems I have lost the photos and video I had on there, I'm not sure if they were being synced to ITunes or not. I restored and it gave me the usual prompt if I wanted to set up the phone as a new phone or restore the backup from my old phone, and I said restore. After several minutes where ITunes appeared to be doing nothing, I disconnected the phone and reconnected it again, mostly to get ITunes to respond to my keyboard commands. From ITunes, I was able to get VoiceOver turned on, allowing me to use the phone. It was asking me the same thing ITunes was asking me, whether I wanted to set it up as a new phone or restore from backup. I said restore from ITunes, and it said connect to ITunes. I then pulled the cable and reconnected the phone again, but still can't get past this screen. How can I use my phone again? What could have caused ITunes to not recognize the phone? I hooked it up to the computer before I started the IOS update on Friday night, and when it was done it worked as it has always done. On the bus today I did reset my data usage and call time statistics but that didn't seem to do anything. Also, ITunes complained that there was no sim card, but I haven't let anyone touch the phone in several days, and I know I didn't take the sim card out. Can anyone help?
Update, I had to set the phone up as a new phone. After that, it synced to ITunes and complained that it couldn't read the phone, but it had shut off the compact voice which I was glad of. However, is there a way to get my messages, call history, and voicemail back? That part is as if it was a new phone. When I reset statistics, it said current period was 0 minutes, but lifetime was like 4 hours, which sounds right. How do I get this information and my recent calls back? Another problem I am having is the auto-lock setting has been set to default, despite it being different on my phone. Also, when it copied my apps, it just put them in a random order, not the order I wanted them in. Is there a way that I can quickly restore all this? I can restore apps to their correct places by moving them, but that takes quite some time, and still doesn't solve my other problems. Can anyone help? Does anyone have an idea what I should do in the future if this happens? What causes it in the first place?
-
Please help I'm really trying to learn it as fast as possible? I've posted the file with all my screen shots going through the enitre process of me creating the LSMW file.
First, I will try to address the iPod issue: If youve tried EVERYTHING on the website, your only other option is probably to contact Apple, I recommend by phone, and informing them of the problem. You are covered by warranty and therefore they are liable to assist you. Try that and come back with a status update
Now I will address your attitude about it:Its absolutely understandable to be upset over something like this, especially with such an expensive product, but you are generalizing far to much. You may think Apple is being unproffesional by not warning potential buyers of the iPods common faults, but do you really think they would? they are out to sell these things, they arent going to point out the bad in their product. And not all iPods have problems, in fact only a fraction do. That gopes for the rest o Apples products as well. You are too hasty assuming all Apple products are junk, and one of many reasons as to why that is unfair of you is becuase you dont own any other Apple products. -
everytime I open qt pro i have to enter the registration code. This is really annoying. Does anyone know how to rectify this problem?
This procedure will check for files in your home folder that are locked or have a wrong owner. It makes no changes and will not, in itself, solve your problem.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
find . -flags +uchg,uappnd -o ! -user $UID
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
Post any lines of output that appear below what you entered — the text, please, not a screenshot.
If any personal information appears in the output, edit before posting, but don’t remove the context. -
I can't forcequit firefox and shutdown my computer, nor can I open up any other programs or applications. Does anyone know how to fix this? please help this poor soul.
You can force quit applications
>Force quit
if that does not work you can force quit a computer shut down by hold the power button for an extended period. -
I have windows 7 and every time I try to play or add a song. It says itunes has stopped working. Please help this is frustrating.
a further message box states that Data Execution Prevention has closed the program.
Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes? -
Please help this: JNLP association extensions confict with arguments
Hello, Please help this:
I use <argument> tag to transfer some parameters to JWS application.
I also use <associatio> tag to associate a specila file(such as .zzz) to JNLP. But when I doulbe click .zzz file, my application only get "-open" and file path as argument, those parameters in <argument> tag in my jnlp are lost!
What should I do..Is this a bug for JWS? No.
..association extensions tag conflicts with <argument>?Quoting the 'JNLP Specification', section 3
'JNLP file', part 5 'Descriptor Information', under
association element/mime-type attribute
"An application making such a request
should be prepared to have its main
method invoked with the arguments
-open filename and -print filename
instead of any arguments listed with
the application-desc element." -
I can't make in app purchases on clash of clans every time I try it tells me to come here. This is really annoying! So how do I solve this problem?
I understand it is from the App Store. That is part of iTunes. You still need to contact them for assistance, or you can try Express Lane, https://expresslane.apple.com/GetproductgroupList.action
-
every time i try to type in my credit card info to pay for an application, this "Apple Support: Tips for Protecting Your Info" internet page comes up and I cannot purchase anything. I can just download the free ones. This is really annoying! How do I stop this?
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Maybe you are looking for
-
How to get the filename of document that opened my app
Hope that makes sense. I'm relatively new to OS X programming and have built a small Cocoa app (not a document-based app). I've associated a file type (.myFileType) with my application. If I double-click a file with that file type, it opens my app au
-
I have a mid-2010 MacBook 13" White Unibody and it's less than a year old; In the past couple of days I've been noticing some slightly worrying changes in my magsafe. It appears that in some positions it will refuse to charge my MacBook, I noticed so
-
I have HD footage that has a frame rate of 23.98 fps. Can I edit Final Cut Express 4.0.1 without it converting the frame rate to 25fps? There's no setting in the Esy Setup for 24fps, so I am assuming it will have to re-render everything to 25fps ever
-
Doesn't close properly the anonymous user's session.
Hello experts. We are implementing the anonymous user in Portal, according to the following link: http://help.sap.com/saphelp_nw04s/helpdata/en/1e/e19f58136e654d9709befa464314f2/frameset.htm We have used the notes: 709354, 837898 and 728106 And the o
-
Customize default toolbar using Adobe Customization Wizard 9?
I'm trying to add the Select Tool, Hand Tool, and Fit Width Tool to my standard build. I've looked through the Direct Editor portion pretty extensively and didn't see anything promising. Did I miss something? What is the preferred method of deploying