PLEASE HELP THIS SIMPLE MAN WITH A VERY SIMPLE QUESTION

Hi and thank you for looking.
I am not musically inclined, challenged in fact. However I am making an iDVD and putting music to my slideshows but the program only lets me put 1 song for an entire group of pictures resulting in hearing the same song OVER AND OVER.
My question for all you experienced garage band people is, is it possible to put a few songs together in garage band and then save them all as 1 song and then export it out to itunes so that I can put it into iDVD?
Remember I have very little knowledge in using garage band so you may have to dumb it down for me but I am quite experienced with iDVD and iTunes now.
Thanks for ANY and all help
Mac

Well, I won't explain all of GB in one post (look at the introductory videos on Apple's GB website), but yes, it's very easy to do that:
• Create a new project and put your slide show video in the video track.
• drag all the songs you want to use into the timeline, they will all get their own music track (note that you can't use DRM protected songs from the iTunes store that way).
• Cut them wherever you want (using the Apple-T command) and move them around as you like.
• If you want the songs to fade into each other, you'll have to use volume curves (look for "curves" in the Help menu).
• When you like the result, share your project to iTunes (either the whole video, or just the audio which you later add in iPhoto or iDVD or iMovie).

Similar Messages

Please help this clueless beginner with out.print syntax....

Please help a clueless beginner out!!!! :-)
I'm trying to build a dynamic table that functions as a calendar...(see http://www.oreilly.com/catalog/javacook/chapter/ch18.html for the basic idea and code structure).
Here's the problem...I want to make each date inside of the table a hyperlink to a new page. I figured out how to create the hyperlinks, but I CAN'T figure out how to create hyperlinks that pass variables to a new page.
Here's the code that works:
// Fill in numbers for the day of month.
for (int i = 1; i <= daysInMonth; i++)
out.print("<td>");
out.print("<a href=newpage.jsp>");
out.print(i);
out.print("</a>");
out.print("</td>");
Here's the code that DOESN'T work....but can serve as pseudo-code for what I want to do:
// Fill in numbers for the day of month.
for (int i = 1; i <= daysInMonth; i++)
out.print("<td>");
out.print("<a href=newpage.jsp?year=<%= yy %>&month=<%= months[mm] %>&date=<%= i %>>");
out.print(i);
out.print("</a>");
out.print("</td>");
<%= yy %>, <%= months[mm] %> are defined elsewhere in the code, and I want to use the current value of "i" from the loop.
So, if everything works like I want, the table will get created, and if yy=2002 and mm=January, then the hyperlinks will look like:
for day 1:
"/newpage.jsp?year=2002&month=January&date=1"
for day 2:
"/newpage.jsp?year=2002&month=January&date=2"
...for day 31:
"/newpage.jsp?year=2002&month=January&date=31"
Can someone please point me in the right direction? Is it even possible to do what I want? (I assume it is...but maybe I can't use out.print???)
Thanks!

Hi. The expression "<%=some_Java_expression %>" is the JSP tag, that returns string value to HTML code. You should use it in HTML block like:
<%String myname="Ivan"; %>
<body>
<p>My name is: <%=myname %></p>
But You tried to use it inside the string expression and it generated some code like this:
<a href="newpage.jsp?year=<%=yy%">...
, didn't it?
It invokes method out.print(" ... "), that prints this string value (but in the HTML block). So You tried to print something inside the print method. You should rewrite Your code like this:
for (int i = 1; i <= daysInMonth; i++)
out.print("<td>");
out.print("<a href=newpage.jsp?year="+yy+"&month="+months[mm]+"&date="+i+">");
out.print(i);
out.print("</a>");
out.print("</td>");
I used the + operator to join Your code for link tag with the values (yy, months[mm], i.
I hope it helps You,
bye.</a>

Please Help ! Simple question !

Hi all,
Please anybody tell me why the following line
<input type="text" name="price" value="<%=myBean.getPrice()==0.0?"":myBean.getPrice()%>">gives me the error:
incompatible types for ?: neither is a subtype of the other
second operand: java.lang.String
third operand : float
out.print(myBean.getPrice()==0.0?"":myBean.getPrice());
^
1 error
I am doing this in JSP.
Please help and reply soon.
Please reply soon.................
Waiting for your reply !
Thanks
amitindia

Like annie said, change the method to return a String (doubt if you want this)
or
<%=myBean.getPrice()==0.0?"":""+myBean.getPrice()%>

Someone PLEASE answer this simple question

what are the technical specs on the line input for the audigy 2 zs? high/low impedance? voltage level? anything please, creative has no really DETAILED specs on their products.
thanks
L_E

Reasonably sure it's high impedance, designed for 2v peak-peak (ie. -v peak to +v peak), with the playback volume control an analog attenuator which affects recording, and the recording volume control digital with a x2 multiplier (i.e. 0dB is approx at 50% position).
One thing this means is that a "too-hot" signal can be attenuated to match the 2Vp-p ADC range to prevent digital clipping of it.
Yes, CL has a reluctance to say more than necessary about internal details.
-Dave
[email protected]

Please answer this simple question: it plays an important role

How to write query to retreive the latest record by using PN-BEGDA , PN-ENDDA, SYDATUM,.
I know using RP-PROVIDE.......other method using query i require
it is urgent

Hi Ramana,
Try this one this will give the latest record in terms of time ok. sy-uzeit : display the current time ok..
data: time like sy-uzeit.
time = sy-uzeit + 80.
Here 80 is SECONDS OK..
select * from PAnnnn where begda = time.
Reward points if helpful
Kiran Kumar.G.A

Should be the bluetoot symbol grayed out when the bluetooth is turned "ON"or it should be highlighted in white like rest of the active symbols are? Please unswer this simple question clearly. Thank you.

My blutooth symbol on the new i-Pod 2 is grayed out when the option is turned "ON". Shouldn't be highlighted white like the rest of the symbols are?

when blue tooth is turned off in settings, the symbol does not show at all. when BT is turned on in settings, but there is no connected device, it will show the symbol gryed out. When BT is on, and connected to an active device, it will show as bright white.

I am having a problem with pop pups and small windows with ads constantly opening up on my safari?? Thought that macs didn't get virus? this looks like one- any experts around? please help me fix it with your instructions? really don't know what to do...

Hi everyone,
I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanks

Those are not viruses. You have probably installed some malware:
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

Please help this: JNLP association extensions confict with arguments

Hello, Please help this:
I use <argument> tag to transfer some parameters to JWS application.
I also use <associatio> tag to associate a specila file(such as .zzz) to JNLP. But when I doulbe click .zzz file, my application only get "-open" and file path as argument, those parameters in <argument> tag in my jnlp are lost!
What should I do

..Is this a bug for JWS? No.
..association extensions tag conflicts with <argument>?Quoting the 'JNLP Specification', section 3
'JNLP file', part 5 'Descriptor Information', under
association element/mime-type attribute
"An application making such a request
should be prepared to have its main
method invoked with the arguments
-open filename and -print filename
instead of any arguments listed with
the application-desc element."

Someone please help a complete beginner with Enterprise Manager!

Question moved from
Someone please help a complete beginner with Enterprise Manager!
Please be gentle with me, I'm absolutely new to all this. We don't have a proper DBA and I've been tasked with the role. There is no-one else in the company with oracle experience and we don't have any support. Until now I've just used enterprise manager to manage the database, but now I have a problem..
We are using Windows Server 2003 and Oracle 10g. I (stupidly) installed some network monitoring software on our server (PRTG network monitor). I almost immediately uninstalled it and all components/registry settings, but it seems to have thrown something out regards the OEM web interface.
We used to access the OEM GUI through http://<hostname>:5500/em, but after installing/uninstalling the network monitor software the OEM webpage would only stay up for a few minutes, before saying 'Internet Explorer cannot display the webpage'. Restarting the DBconsole in services fixed the problem, but again, only for a few minutes.
Spent all day yesterday looking at logfiles (they didn't make much sense to me), but seemed to be saying access was denied to the server ('actively denied it'). Lots of googling led me to believe I needed to reconfigure OEM by dropping and recreating it using:
emctl stop dbconsole
emca -deconfig dbcontrol db
emca -repos recreate
during this process I was asked for various passwords and a port number? I didn't even know what to use as the port number but guessed it was 5500 ?!? (probably wrong). As it didn't work I used the default port number that I found somewhere on the web.
However now I am even deeper in the **** as this didn't work either, (some error about listnener?) and I have now lost the DBConsole in windows services. Obviously the OEM web console doesn't work at all now
I would be eternally grateful for some patient, beginners help here..I can post whatever log files are necessary - I just need to know what I'm supposed to be doing and where to start..
We used to log on to the OEM as 'SYSTEM', but nowhere in the process does it seem to ask me for the password for that (its asked me for SYS and SYSMAN)
It could be that I'm going about this completely wrong, but with only a days experience in all this its pretty hard to know what I'm doing really!
As you can tell I'm in way over my head..I just need OEM web interface to work!
Thanks in advance

ok, thanks to helpful comments from other people in my initial thread (posted in general database forum), after rebuilding the console/repository I now have EM up and running. But there are more problems..
Firstly I have an error at the very top of the screen:
java.lang.Exception: Number of responses does not match queries
Also, the 'Host CPU' and 'Active Sessions' are blank and say 'No Data Is Currently Available' beneath them
my emagent.trc file contains this error, repeating with different thread IDs every 30 seconds...
(error = 10061)
2012-04-30 17:19:28 Thread-4376 ERROR pingManager: nmepm_pingReposURL: Cannot connect to http://hostname:5500/em/upload/: retStatus=-1
2012-04-30 17:19:59 Thread-1448 WARN http: snmehl_connect: connect failed to (hostname:5500): No connection could be made because the target machine actively refused it.
Help!

Please help I just accidentally deleted a very very important note from my "Notes" on my iPhone 4s. How can I get it back? Is there a "Trash" file somewhere for deleted notes? Thank you, Susan

Please help I just accidentally deleted a very very important note from my "Notes" on my iPhone 4s. How can I get it back?
Is there a "Trash" file somewhere for deleted notes?
Thank you,
Susan

Had you never backed up the phone before? When you saw the iTunes logo and cable, the device was in recovery mode. The data was already lost. The only way to recover from that is to restore the device, which will delete all of your data. You will only be able to restore to your last backup, whenever that was. Sorry this happened, but this highlights the importance of doing regular backups. The backup is the only protection you have against a problem like this.

Someone please help this is getting irritating!

how do I fix the system overload erra audio engin was not able to process all required data? someone please help this is getting irritating!

You have a few options:
1- Increase the Buffer Size in the Logic Devices Preferences to the maximum (1024)
2- Freeze some Tracks with CPU intensive plugins
3- Buy a faster computer
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

I can't forcequit firefox and shutdown my computer, nor can I open up any other programs or applications. Does anyone know how to fix this? please help this poor soul.

I can't forcequit firefox and shutdown my computer, nor can I open up any other programs or applications. Does anyone know how to fix this? please help this poor soul.

You can force quit applications
>Force quit
if that does not work you can force quit a computer shut down by hold the power button for an extended period.

I have an ipod 2g , The keyboard won't work! Or at least some of it's letters and numbers won't. please help i'm stuck with emojis

i have an ippd touch 2g , a part of my keyboard won't work , i can type letters but i can't type numbers . please help i'm stuck with emojis keyboard

Try restarting the iPod by holding down the lock and home button together and then slide the power button to turn it off and then wait 10 seconds and start it up again. If it is not a reset issue then it may be a hardware issue. Is your iPod damaged or have you dropped it recently? If it is a hardware problem then you may not be able to fix it. If your iPod has multitasking options like the new iOS devices, close out the app and then try again, it should reset your device to letters instead of emojis.

I have windows 7 and every time I try to play or add a song. It says itunes has stopped working. Please help this is frustrating.

I have windows 7 and every time I try to play or add a song. It says itunes has stopped working. Please help this is frustrating.

a further message box states that Data Execution Prevention has closed the program.
Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

Please help me to fix my problem in security question, I've really totally forgot the answer, this is the second time

Please help me to fix my problem in security question I've really forgot the answer,
Please let me know how to fix this, thank you

You set the answers to the security questions so that nobody else can access the iPad without knowing those answers. It's a security thing. You need to get your head around the importance of these answers. If we put all your data in a safe and gave you a password to open it, would you forget it? Twice? That is exactly what you have done.
Restore. The fate of your data is uncertain.

PLEASE HELP THIS SIMPLE MAN WITH A VERY SIMPLE QUESTION

Similar Messages

Maybe you are looking for