Please Help to Proof Read?
Hey,
Just wondering if someone can read all my tutorials or at least a couple and tell me which ones.
I just want to know if they are understandable and make sense.
www.mcbaingames.com/tutorials
the tutorials are about flash related so i would love for an expert to read some then note down some tips i could add to make them easier to read.
-some tutorials are uncompleted which will only have white as the page
Thanks to whoever takes the time to help.
Hi Janesb,
There are number of reasons due which this issue may occur.
If the file is password protected or you dont have the rights to change the file. Also if the file has corrupted fonts. Also you may have intermittent Internet connection.
You may try to test with a sample pdf document and try to convert it
Regards,
Ajlan Huda.
Similar Messages
-
PLEASE HELP - how to read a crash report
Please help!
I recently wiped my mid 2010 MacBook Pro clean and rebooted from scratch. I used Time Machine to get my material back up and running and it works fine except it crashed on occasion (1-4x p/week) - I am a professional DJ and I fear it will crash during a gig (fortunately it hasn't yet). I am clueless as to what is happening, however I have copied the crash report and am posting it below. Any and all help would be GREATLY appreciated.
As for specs, I am running OS X 10.9.1 with an i7 2.66 processor, 8 GB of memory, and a 750 GB hard drive.
Thanks in advance!
Anonymous UUID: 49E3B62D-9B24-8BC5-09FB-33DAA0CA5C29
Mon Mar 3 21:17:23 2014
panic(cpu 0 caller 0xffffff7f9b77cfac): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0x0a2910de 0x00100000 0x00000000, BAR0 0xd2000000 0xffffff812d4ac000 0x0a5480a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff810a413140 : 0xffffff8019422f69
0xffffff810a4131c0 : 0xffffff7f9b77cfac
0xffffff810a413290 : 0xffffff7f99ef853d
0xffffff810a413350 : 0xffffff7f99fc4d9e
0xffffff810a413390 : 0xffffff7f99fc4dfc
0xffffff810a413400 : 0xffffff7f9a2495be
0xffffff810a413530 : 0xffffff7f99fe8d41
0xffffff810a413550 : 0xffffff7f99eff08d
0xffffff810a413600 : 0xffffff7f99efcbae
0xffffff810a413800 : 0xffffff7f99efdaf6
0xffffff810a4138e0 : 0xffffff7f9adfaba2
0xffffff810a413920 : 0xffffff7f9ae0a55f
0xffffff810a413940 : 0xffffff7f9ae3851b
0xffffff810a413980 : 0xffffff7f9ae3857b
0xffffff810a4139c0 : 0xffffff7f9ae0fff5
0xffffff810a413a10 : 0xffffff7f9addbd3e
0xffffff810a413aa0 : 0xffffff7f9add7cc7
0xffffff810a413ad0 : 0xffffff7f9add5816
0xffffff810a413b00 : 0xffffff80198cb873
0xffffff810a413b90 : 0xffffff80198cd76f
0xffffff810a413bf0 : 0xffffff80198cb28f
0xffffff810a413d40 : 0xffffff80194b6008
0xffffff810a413e50 : 0xffffff8019426bb1
0xffffff810a413e80 : 0xffffff80194139b5
0xffffff810a413ef0 : 0xffffff801941e003
0xffffff810a413f70 : 0xffffff80194c921d
0xffffff810a413fb0 : 0xffffff80194f3e26
Kernel Extensions in backtrace:
com.apple.driver.AppleMuxControl(3.4.12)[A4934A66-0E30-36E9-984A-650481102449]@ 0xffffff7f9b76f000->0xffffff7f9b781fff
dependency: com.apple.driver.AppleGraphicsControl(3.4.12)[661E3C87-5B97-3272-88FF-B9BA9B6E2 4ED]@0xffffff7f9b767000
dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f99d24000
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f99aba000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f99e54000
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f9b76a000
com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f99ea7000->0xffffff7f9a116fff
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f99aba000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f99e97000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f99e54000
com.apple.nvidia.classic.NVDANV50HalTesla(8.1.8)[3666E0FC-87C7-3329-BD8C-2F1ADE D100A4]@0xffffff7f9a121000->0xffffff7f9a3cdfff
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f99ea7000
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f99aba000
com.apple.GeForceTesla(8.1.8)[7DAF283F-6FD3-3783-B3CC-D23964F1B9B8]@0xffffff7f9 adba000->0xffffff7f9ae84fff
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f99aba000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f99e97000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f99e54000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f99ea7000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000019200000
Kernel text base: 0xffffff8019400000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 1827669571313
last loaded kext at 253114324646: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f9b87f000, size 65536)
last unloaded kext at 313525964965: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f9b87f000, size 57344)
loaded kexts:
com.serato.usb.kext 2.3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.14.11
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.5.3fc1
com.apple.GeForceTesla 8.1.8
com.apple.driver.AppleMikeyDriver 2.5.3fc1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelHDGraphics 8.1.8
com.apple.driver.AppleIntelHDGraphicsFB 8.1.8
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.driver.DspFuncLib 2.5.3fc1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleHDAController 2.5.3fc1
com.apple.iokit.IOHDAFamily 2.5.3fc1
com.apple.iokit.IOSurface 91
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x857F, 0x483634353155363446373036364700000000
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x857F, 0x483634353155363446373036364700000000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST750LX003-1AC154, 750.16 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Internal Memory Card Reader
USB Device: Hub
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:Quadi_414,
some 15-inch Mid 2010 MacBook Pros are known to have a defective NVIDIA GPU. Your GPU panic suggests that yours could be one of them. Apple had a gratis servicing program for this defect for three years from the date of purchase; they still offer the servicing program, but it is no longer guaranteed to be gratis. -
Please Help with Adobe Reader as I can't open it on most of my downloads?
I can't open my downloads from Adobe Reader.
Some are ok most can't open. Please Help.
Thanks,
Jerry
[Removed personal information]
Message was edited by: siniousWhich OS? Which Reader version?
What exactly you mean by downloads? downloaded pdf files? -
hello, hopefully i have post the correct forum.
all my computer file even ie/firefox or chrome, when i try to open all file open with adobe, but can't not even open, so i need to uninstall the adobe reader 10 and everything goes to normal.
but i need the adobe reader on my computer, please anyone can help me to go back normal and re install the adobe
i know i did something wrong and all my exe.file can't read and somehow now it working but not the adobe
sorry, i don't kno how to explain
please help me to re install adobe reader
thank you so muchAre you using Windows 7 or Vista?
If so, recreating the user profile may help to resolve the issue. -
Please help me Newbye reading an hwx binary - ascii
Hi all,
I'm a newbie in labview and i need to convert, extracting one-by-one , the
hex elements present in a binary file,
working on them by some formulas and assigning them into an array or, better
, writing them to a spreadsheet file !
I've already read the example "read binary file" in the examples of labview
help but there isn't any kind of extraction of data whose I'm interested
(one by one extraction and conversion)
Thank you all so much in advance
Please help me.I'm not sure why you want to do one by one extraction. Since File I/O is fairly slow, you'd be better off reading the entire file at once as in the example. This creates an array that you can then manipulate in any way that you want. Many functions operate on either arrays or scalars or you can input an array into a for loop for item by item conversion. You're also welcome to use the Read Characters From File function. You would use this in a loop and specify a constant number of characters to read. Connect the mark after read to a shift register (right side of the loop). The other side of the shift register gets wired to the pos mode input. Terminate the loop when EOF is detected.
As far as ouput, there is the Write to Spreadsheet file function for comm
a or tab separated text files or you can use ActiveX to write an Excel file directly. Search the examples for the use of both of these. -
Please Help in Buffered Reader getting error.....
Getting error
java.lang.NumberFormatException: For input string: ""
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Integer.parseInt(Integer.java:468)
at java.lang.Integer.parseInt(Integer.java:497)
at charread.main(charread.java:18)
import java.io.*;
class charread
InputStreamReader ir=new InputStreamReader(System.in);
BufferedReader br=new BufferedReader(ir);
public void main()throws IOException
InputStreamReader ir=new InputStreamReader(System.in);
BufferedReader br=new BufferedReader(ir);
System.out.println("enter a character");
char p=(char)(br.read());
System.out.println("entered character = "+p);
System.out.flush();
System.out.println("enter a number");
String s=br.readLine();
int n=Integer.parseInt(s);
System.out.println("enter a number = "+n);
Please Help.....JoachimSauer wrote:
First you read a single character, then you read the rest of the line.
You probably entered a character and pressed enter.
read() returned the character, readLine() returned the rest of the line, which is an empty String. And empty String can't be converted to an int.
It's probably the easiest approach to just replace read() with a readLine() and take the first character of that String (after verifying that there is a character and optionally that there's only one character in that String).Alternatively you can call readLine() after you read the char.
However this is merely a quick fix and I am concerned about other aspects of your program.
InputStreamReader ir=new InputStreamReader(System.in);
BufferedReader br=new BufferedReader(ir);The alternative to wrapping a BufferedReader around an InputStream is to use a Scanner, contrast the above example with the one below:
Scanner sin = new Scanner(System.in);
System.out.flush();Calling flush in this situation in unnecessary.
int n=Integer.parseInt(s);Place the following code in a try/catch block every single time you parse a String from a user into an Integer in case an Exception occurs, e.g. user enters a word or letter.
Integer n = null;
while(n == null) {
try {
String s = br.readLine();
n = Integer.parseInt(s);
} catch(NumberFormatException e) {
System.out.println("Please enter an Integer");
}Finally onto Class naming conventions, Class names begin with a capital letter, variables and methods begin with a lower case letter.
class charreadAvoid naming methods "void", especially with a return value of null. Or one might think, well in my case anyway that this is the entry point into your application.
public void main()Mel -
Please help! Storage reading faulty on ipad2. Can't update to iOS 7.0.4!
Please Help! I have literally deleted all apps and pics from my ipad2 with the intention of updating to iOS7.0.4 It says I need 3.5GB to successfuly update ios but after clearing all removable apps and media I only have 2.6GB. What on earth is using all my storage?! There are no apps or pics stored on my ipad jet something is using 11.2gb! Can anyone help please?
Locard wrote:
... but after clearing all removable apps and media I only have 2.6GB. What on earth is using all my storage?! ...
See Here > http://osxdaily.com/2013/07/24/remove-data-storage-iphone-ipad/
Locard wrote:
... the intention of updating to iOS7.0.4 It says I need 3.5GB to successfuly update ios ...
Do the Update using iTunes on your Computer.
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch -
Photoshop CS6 Trial "Installer Failed To Initialize" on Vista. Please help I have read other posts!
I've read through countless posts on different sites and still can't find a fix to this. I've been having a hard time trying to figure out what advice actually applies to me. After extracting all the files and I run the setup I get about 75% through before I get the Installer failed to initialize message. After looking at the PDapp data It seems clear what the problem is, but I have no idea how to fix it. The fatal/error messages are as follows:
[FATAL] Setup - Adobe Application Manager executable does not exist at the location: C:\Users\Tanner\AppData\Local\Adobe\OOBE\PDApp\core\PDApp.exe
[FATAL] Setup - Unable to launch PDApp. File missing
[ERROR] Setup - Error in deleting folder C:\Users\Tanner\AppData\Local\Adobe. Error Code:145
Please, any help would be great.first thing to do is to re-download ps cs6 in case your dl was corrupted.
if you have no other cs6 programs installed, run the cleaner before trying to re-install: http://www.adobe.com/support/contact/cscleanertool.html -
Please help with Overdrive reader
I use Overdrive to read digital books from my library. After changing to a new iPhone, I was not able to download any books using the Adobe ID. The message I get is "This Adobe ID has been authorized too many times". Does anyone know why this happened and how I would get pass it?
Thanks!You can only have up to 6 devices authorized at any one time.
If you still have access to another device you no loger use, deauthorize it, and this should free up a slot for the iPhone.
If you can't do that, or it it doesn't free up a slot
Adobe Live Chat: http://www.adobe.com/support/chat/ivrchat.html,
or as a slight short cut try http://helpx.adobe.com/contact.html?product=digital-editions&topic=using-my-product-or-ser vice
Choose topic ‘'Signing into my Account' , and then click on 'I still need help';
then you should see 'Chat with an Agent' at the bottom of the page.
Depending on screen resolution, you may need to scroll down a bit to see the Chat with an Agent' bit, just under 'Ask our Experts'.
'Ask our experts' will indeed just lead you back to this forum.
Sometimes you will get ‘Sorry! All agents are busy— please check back soon.’
Don’t refresh the page, just hang on and it should eventually go to ‘Chat Now, and agent is available’.
They can reset your authorizations, and then you must reauthorize any devices you still need.
(Unfortunately, Adobe haven’t got round to an admin website for viewing and editing authorizations.)
Some of the representatives haven't been properly trained and don't know what to do (and claim there is nothing they can do);
in that case the only way seems to be to give up that chat and try another session hoping for a properly trained representative.
If your problem is with another device using Overdrive, Bluefire, Aldiko or similar third party app, it is recommended not to mention that app when on the chat, just mention that you have run out of authorizations (E_ACT_TOO_MANY_ACTIVATIONS) . Thanks to AJP_Bear for that tip.
~ -
Please help me in reading the ascii file in encoded format
hi ,
iam trying to read the ascii file and i need to encode the text file, can u suggest me what arre the different methods are availble for me to encode the text file, please suggest me which is the effiecient method tto use?This question has been answered before, please search the forums in future.
You could do something like this, it probably not the most efficient though.
If you don't need to do it in code then the native2ascii does this conversion see: http://java.sun.com/j2se/1.4.2/docs/tooldocs/windows/native2ascii.html
public static void convert(String vsFile) throws IOException
File f = new File(vsFile);
FileReader fr = new FileReader(f);
char[] buf;
int bytesRead = 0;
int startAt = 0;
String content = "";
do
buf = new char[512];
bytesRead = fr.read(buf, 0, 512);
startAt += bytesRead;
String tmp = new String(buf);
content += tmp;
while (bytesRead == 512);
FileOutputStream fout = new FileOutputStream(f);
OutputStreamWriter out = new OutputStreamWriter(fout, "UTF-8");
out.write(content.trim());
out.flush();
out.close();
} -
[Solved]please help with btrfs read only filesystem
Yesterday I deleted a snapshot using the command
sudo btrfs subvolume delete /snapshot-2014-**-**
in which the snapshot-... is a snapshot I created eariler. But a few hours later I suddenly found that the file system became read-only. I reboot and the message stuck at mounting /dev/sda1 and failed, into an emergency shell, saying something like "no subvolume is find". I tried to mount /dev/sda1 using a rescue usb stick but still failed...
I have been using the same command to create and delete snapshots for several months without problem, but this time... I don't know what was I doing wrong, maybe I mistyped something this time?
So... How could I recovery the filesystem? I've searched for a bit but cannot find any satisfied result.
EDIT: I re-installed the system.
Last edited by Frefreak (2014-09-27 10:39:45)LoBo3268715 wrote:Just gonna take a stab at what you want to do here but I assume you want to switch to the ATI card correct? using open source drivers? Google around for vgaswitcharoo. It can be a royal PITA but I got it working with my intel integrated card and ATI mobility 5650. Also there is a package in the AUR for this. https://aur.archlinux.org/packages.php?ID=51704
Yes, that's exactly what I'm trying to achieve. Thanks for the advice, I will explore all the possibilities with vga_switcheroo -
Ichat video error 8 -- Ralph, please help, I have read the prior posts!
I am trying to video chat with another 10.5.2 machine. We are both using recent Airport Extreme Base Stations. I am connecting via Cox cable modem, RCA 6G24, the other computer is on a DSL modem. When trying to connect, we receive the error 8 message. The other computer has Parallels connected, but we have disabled both the Guest and NAT accounts in the Network sharing tab. Neither machine has internet sharing enabled. We have connected a few times with video, but the majority of the time, we receive the error message below. Any help would be greatly appreciated. One interesting note, we are able to connect for a video chat using an older ibook with 10.4.11 installed on the DSL side and the 10.5.2 machine on Cox cable. We are usually unable to connect 10.5.2 to 10.5.2. Any help would be greatly appreciated.
The abbreviated version of the message follows:
Date/Time: 2008-03-23 15:39:42.755 -0400
OS Version: 10.5.2 (Build 9C7010)
Report Version: 4
iChat Connection Log:
2008-03-23 15:39:08 -0400: AVChat started with ID 3783672204.
2008-03-23 15:39:08 -0400: kevinjosephrice1: State change from AVChatNoState to AVChatStateWaiting.
2008-03-23 15:39:08 -0400: 0x9291970: State change from AVChatNoState to AVChatStateInvited.
2008-03-23 15:39:15 -0400: 0x9291970: State change from AVChatStateInvited to AVChatStateConnecting.
2008-03-23 15:39:15 -0400: kevinjosephrice1: State change from AVChatStateWaiting to AVChatStateConnecting.
2008-03-23 15:39:29 -0400: 0x9291970: State change from AVChatStateConnecting to AVChatStateEnded.
2008-03-23 15:39:29 -0400: 0x9291970: Error -8 (Did not receive a response from 0x9291970.)
2008-03-23 15:39:29 -0400: kevinjosephrice1: State change from AVChatStateConnecting to AVChatStateEnded.
2008-03-23 15:39:29 -0400: kevinjosephrice1: Error -8 (Did not receive a response from 0x9291970.)
Video Conference Error Report:
10.855543 @SIP/SIP.c:2719 type=4 (900A0015/2)
[SIPConnectIPPort failed]
Video Conference Support Report:
0.687790 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
7.737749 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
7.744280 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
8.854961 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@[rip]:16402 SIP/2.0
Via: SIP/2.0/UDP [lip]:16402;branch=z9hG4bK4df426d77401783d
Max-Forwards: 70
To: "u0" <sip:user@[rip]:16402>
From: "0" <sip:user@[lip]:16402>;tag=627540858
Call-ID: d3044424-f910-11dc-8df4-9fc4ccab4012@254-56-3-160
CSeq: 1 INVITE
Contact: <sip:user@[lip]:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 773
v=0
o=kjrice 0 0 IN IP6 lip
s=0
c=IN IP6 lip
b=AS:2147483647
t=0 0
a=hwi:288:2:2000
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:964228453
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 15:640:480:640:480:15
a=fmtp:123 imagesize 0 rules 15:640:480:640:480:15
a=rtpID:2253875979
9.355536 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@[rip]:16402 SIP/2.0
Via: SIP/2.0/UDP [lip]:16402;branch=z9hG4bK4df426d77401783d
Max-Forwards: 70
To: "u0" <sip:user@[rip]:16402>
From: "0" <sip:user@[lip]:16402>;tag=627540858
Call-ID: d3044424-f910-11dc-8df4-9fc4ccab4012@254-56-3-160
CSeq: 1 INVITE
Contact: <sip:user@[lip]:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 773
v=0
o=kjrice 0 0 IN IP6 lip
s=0
c=IN IP6 lip
b=AS:2147483647
t=0 0
a=hwi:288:2:2000
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:964228453
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 15:640:480:640:480:15
a=fmtp:123 imagesize 0 rules 15:640:480:640:480:15
a=rtpID:2253875979
10.356086 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@[rip]:16402 SIP/2.0
Via: SIP/2.0/UDP [lip]:16402;branch=z9hG4bK4df426d77401783d
Max-Forwards: 70
To: "u0" <sip:user@[rip]:16402>
From: "0" <sip:user@[lip]:16402>;tag=627540858
Call-ID: d3044424-f910-11dc-8df4-9fc4ccab4012@254-56-3-160
CSeq: 1 INVITE
Contact: <sip:user@[lip]:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 773
v=0
o=kjrice 0 0 IN IP6 lip
s=0
c=IN IP6 lip
b=AS:2147483647
t=0 0
a=hwi:288:2:2000
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:964228453
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 15:640:480:640:480:15
a=fmtp:123 imagesize 0 rules 15:640:480:640:480:15
a=rtpID:2253875979
Video Conference User Report:
0.000000 @:0 type=5 (00000000/16402)
[Local SIP port]
0.000041 @:0 type=5 (00000000/16402)
[Local SIP port]
10.946797 @Video Conference/VideoConferenceMultiController.m:1474 type=5 (00000000/0)
[IP And Port Data With Caller IP And Port Data: Obtained 200 bytes of local IP and port data (5 entries). Remote data was 0 bytes (0 entries).
[]Hi,
Thanks for not including the Binary Images part.
This log indicates your have called out and iChat has moved to the SIP Invite part.
At this point it is waiting and repeating that SIP invite (after the Visible invite is accepted).
It is using the "right" ports at your end.
It says the other end is responding at least to the visible invite and potentially this is also on port 16402.
However it does not progress.
See he has two computers on the DSL modem how has he got the ports open for iChat for these two computers ?
I would suspect that he may have the Airport in Bridge mode (Joined and Existing Network or set it NOT to share an IP) but the modem is doing DHCP and Port Forwarding and the ports are not pointed to the new computer.
Worse case is he has both devices doing DHCP and at his end he is getting Error 4
4:53 PM Monday; March 24, 2008 -
Please help with file reading component
i am currently writing a program in which i need to have a JTable
which displays data from a text file which can be selected from an
option via a JList. I can get the info from the file into the JTable
but for some reason which i can't figure out! the file reading method
which i have written to read the data in the text file keeps reading the text file twice so i am getting duplicate data in the JTable. it may
be easier to understand with the code i have supplied for the ListListener and the file reading method. the text file which is to be read contains data in the form - aName%anAddress%aBirthdate%aGender
here is the code:-
//class listening for JList selection
class ListListener implements ListSelectionListener{
public void valueChanged(ListSelectionEvent e){
try{
//send the selected index to file reading method
readFile(fileList.getSelectedIndex());
catch(IOException exception){
JOptionPane.showMessageDialog(
PeopleJTable3.this,
"File not found", "Error",
JOptionPane.ERROR_MESSAGE);
}//end of valueChanged
//method to read a file given a specific index
public void readFile(int fileNumber)throws IOException{
BufferedReader keyboard = new
BufferedReader(new InputStreamReader(System.in));
PrintWriter screen = new PrintWriter(System.out, true);
//declare variables to enable separating the data in the file
String fileName, name, address, birthdate, gender, line;
int i=0;
int lineLength,firstPercent,secondPercent, thirdPercent;
PersonRecord[] group = new PersonRecord[20];
final char PERCENT = '%';
if(fileNumber == 0){
fileName = new String("datafile.txt");
//create filereader to read a byte stream from a file
//oparameter has name of file;
FileReader fr = new FileReader("datafile.txt");
//create buffered reader object takes stream of characters
//from filereader
BufferedReader in = new BufferedReader(fr);
line = in.readLine();
// while (line != null){
while( !line.equals("0")){
//find second percentage
firstPercent = line.indexOf(PERCENT);
int a = firstPercent + 1;
while(line.charAt(a) != '%'){
a++;
//find third percentage
secondPercent = a;
int b = secondPercent + 1;
while(line.charAt(b) != '%'){
b++;
thirdPercent = b;
//extract the name
name = line.substring(0,firstPercent);
//extract the address
address = line.substring(firstPercent + 1, secondPercent);
//extract the D.O.B.
birthdate = line.substring(secondPercent + 1, thirdPercent);
//extract overdraft amount;
gender = line.substring(thirdPercent + 1, line.length());
String[] tabEntry = {name,address,birthdate,gender};
//add this row to JTable
people.addRow(tabEntry);
line = in.readLine();
screen.println(i);//this was used to check that the
//file was actually being read twice
//from this method
i++;
}//end while loop
in.close();
}//end readFile
if you can tell me why this read the file twice that would be fantastic!
Cheers
iainoh, that is right... the valueChanged() method will get called twice when you use a mouseclick, but if selecting from the keyboard it will only be called once. I'm not sure why it does that either, but what camickr suggested will fix it.
Here is my substitution using the StringTokenizer..
// you will need to import the class
import java.util.StringTokenizer;
// this will actually read the entire file until EOF
while( (line = in.readLine()) != null )
StringTokenizer st = new StringTokenizer( line, "%", false );
// make sure there are at least 4 tokens in this line to read
while( st.countTokens() == 4 )
name = st.nextToken();
address = st.nextToken();
birthdate = st.nextToken();
gender = st.nextToken();
String[] tabEntry = {name,address,birthdate,gender};
//add this row to JTable
people.addRow(tabEntry);
} //end while loopHere's the link to the StringTokenizer's API http://java.sun.com/j2se/1.3/docs/api/java/util/StringTokenizer.html
good luck,
.kim -
Kernel Panic! Please help me to read it out :(
Hey!
Since about 1 month i have near daily a kernel panic with my MacBook Air.
Interval Since Last Panic Report: 64584 sec
Panics Since Last Report: 3
Anonymous UUID: 8ED21CCA-9465-417B-B4BE-EC1E750F6F60
Mon Feb 20 15:33:28 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff8000546df0, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef8007f50890, CR3: 0x0000000009901000, CR4: 0x0000000000000660
RAX: 0xffffff8007bc4700, RBX: 0x0000000000000000, RCX: 0x0000000003000000, RDX: 0xffffff8006d59270
RSP: 0xffffff8054893f00, RBP: 0xffffff8054893f20, RSI: 0x0000000000000000, RDI: 0xffffff8006d59270
R8: 0x0000000000000001, R9: 0xffffff8054893f00, R10: 0x00007fff8405667a, R11: 0xffffff80002d8220
R12: 0x00000000000002d0, R13: 0xffffff80005a8e70, R14: 0x000000000000007d, R15: 0xffffef8007f50880
RFL: 0x0000000000010282, RIP: 0xffffff8000546df0, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffef8007f50890, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8054893bc0 : 0xffffff8000220702
0xffffff8054893c40 : 0xffffff80002c266d
0xffffff8054893de0 : 0xffffff80002d7a1d
0xffffff8054893e00 : 0xffffff8000546df0
0xffffff8054893f20 : 0xffffff80005a8f8b
0xffffff8054893f70 : 0xffffff80002aeb80
0xffffff8054893fb0 : 0xffffff80002d8383
BSD process name corresponding to current thread: coreservicesd
Mac OS version:
11D50b
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
Kernel UUID: 7B6546C7-70E8-3ED8-A6C3-C927E4D3D0D6
System model name: MacBookAir2,1 (Mac-F42D88C8)
System uptime in nanoseconds: 8397892010362
last loaded kext at 7343897956542: com.apple.iokit.IOAVBFamily 1.0.0d22 (addr 0xffffff7f80817000, size 36864)
last unloaded kext at 7416820462908: com.apple.iokit.IOUSBMassStorageClass 3.0.1 (addr 0xffffff7f807e8000, size 69632)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.ApplePlatformEnabler 2.0.4d2
com.apple.driver.AGPM 100.12.42
com.apple.driver.AppleHDA 2.1.7f9
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.GeForce 7.1.8
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.AppleLPC 1.5.3
com.apple.driver.AppleBacklight 170.1.9
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AirPortBrcm43224 500.36.11
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleUSBOHCI 4.4.5
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.3.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.1
com.apple.driver.AppleIntelCPUPowerManagement 167.3.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.3
com.apple.driver.DspFuncLib 2.1.7f9
com.apple.nvidia.nv50hal 7.1.8
com.apple.NVDAResman 7.1.8
com.apple.driver.AppleHDAController 2.1.7f9
com.apple.iokit.IOHDAFamily 2.1.7f9
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOBluetoothSerialManager 4.0.3f12
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc6
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.3f12
com.apple.driver.AppleUSBBluetoothHCIController 4.0.3f12
com.apple.iokit.IOBluetoothFamily 4.0.3f12
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.driver.XsanFilter 403
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IO80211Family 412.2
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.3
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookAir2,1, BootROM MBA21.0075.B05, 2 processors, Intel Core 2 Duo, 2.13 GHz, 2 GB, SMC 1.34f8
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/BuiltIn0, 1 GB, DDR3, 1067 MHz, 0x80AD, N/A
Memory Module: BANK 0/BuiltIn1, 1 GB, DDR3, 1067 MHz, 0x80AD, N/A
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.36.11)
Bluetooth: Version 4.0.3f12, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD TS128B, 121,33 GB
USB Device: Built-in iSight, apple_vendor_id, 0x8505, 0x24400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8216, 0x06110000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0224, 0x04600000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
I hope you can help me in order to fix it
best regards from germanyPlease help me to fix it... it makes me craaazy
-
Very confused Mini DVI to Video Converter - please help!
I have a iBook G4 that I use as my home ents hub, I purchased a DVI to Video converter which worked well for about a week until one day my Mac started recognising it as a VGA adapter.
When the adapter's plugged in the only options in the displays preferences panel are for VGA resolutions, no PAL or NTSC settings and I get a squiggly black screen on my TV.
The adapter works perfectly well with my friend's identical iBook and on his iMac too.
The mini DVI port on my mac works fine when hooked up to a VGA monitor.
HELP!!!! Until I get this fixed I'm stuck watching Lost on a 12" screen, which *****.I have the exact same problem. For years my iBook has output happily to the tv via the Mini-VGA -> Composite/SVIDEO adaptor. Suddenly it stopped working and recognizes the adaptor as a VGA-Monitor.
I've tried resetting the PMU, flashing the PRAM and NVRAM, "shoving" the cable into the socket, deleting com.apple.windowserver.plist files...
Please help...
Maybe you are looking for
-
TS3212 Tried to dowload and install ITunes multiple times-can't get it to work
I have followed instructions to take out ITunes then download-won't install message MSVCR80.dll missing-can you help??
-
DVDRW/CDR Drive no longer recognizes data on data disks!
After installing itunes 10, any dvdr I put in my disk drive is recognized as an audio cd, even though it is a burned data disk with avi's on it? Now when i open it, it shows it as containing 1 file named Track01.cda. Short of uninstalling the softwar
-
I decided to take the plunge with my 2011 macbook pro (model 8.2, 8gb of ram, Mavericks 10.9.1) and do the optical drive swap out. After some hassle, I got it booted up. I put the OS on my ssd (120gb Crucial m500), then I used migration assistant to
-
I need to delete a password that is saved in FireFox. What can I do?
I saved my son's PIN in the FAFSA site. Now when I try to log into my own account through the same site, at the time I clear my son's password out of the blank and add my own PIN, when I click "next", it inserts my son's PIN at the end of mine, and I
-
Needed to copy the share from one server to share in another server
Hi , Needed to copy the data from one share named as xyz in the server 1 to the another share abc in another server 2. Share xyz data should be copied to the share abc which has already different data in it .We need to copy all the data from the shar