Please help, trying to Batch Capture in CS4

I am very new at this and I have been looking at the help guide for hours to no avail. I am trying to batch capture from a Mini DV camcorder, I logged all of the clips and batch captured them, but once it is finished all of the files say Media Offline in both preview screens and the status when I scroll over is Capture Failed, even though it says it is finished. I don't know what else to do. Am I doing something wrong?

Ok, sorry for being so unhelpful I just don't know where to start...
How/where did you log your footage?
What do you mean log? Just shooting it?
What are your capture settings (post a screenshot, if you like)?
Posted screenshot
Are you able to connect to the camera from the Capture panel?
Yes
Can you control it?
Yes.
Do you see a preview as you shuttle?
I can see it sometimes, then sometimes it will not show. It always looks like it does in the shot with the lines through it. If it disappears I have to turn the camera off and back on to see it
Did you use the same camera to shoot this footage?
Yes
Will the tape playback in the camera itself?
Yes
Are you positive the footage on the tape isn't HDV?
I am using regular DV tapes on a regular DV camera, so I’m pretty sure it isn’t...

Similar Messages

Cant connect with a PC please help trying to do Christmas CHAT.

Mac is set up with ISIGHT/ICHAT
PC is set up with LOGICTECH Quickcam Fusion/AOL Instant messenger.
So we can text message and we can even do an audio chat. But when it comes to Video it does not go through. When I(the mac) invite the PC, the PC sees the invitation and will accept. My window will even say that it has started the video chat but I cant see them, only myself.
When they invite me I never get the invitation and they just sit on there side.
They are in a hotel...could this be a factor with some firewall.
Any ideas. Please help. We are trying to set this up to video chat with my father for Christmas. four days to go.
thanks jack

Hi bibbo,
Ok Networking basics 101
DHCP. Dynamic hosting by a networking device.
This can be the ISP server, your modem or a router if you have one as well. As both Macs and PCs can "Share this internet Connection" then technically then can be (do this) as well.
Lets presume that you have just a modem and your computer.
Lets presume you Mac is in default settings where it expects to use - or have sent to it - an IP from a DHCP server.
You can look this up on a Mac.
Go to System Preferences > Network.
In the second drop down select the connection method you are using to the modem (built in Ethernet or Airport for wireless).
Then click on the TCP/IP tab.
This should have a drop down that will confirm it is "Using DHCP"
This will mean that it is.
The type of IP shown under that will say if the modem is in bridge mode (by showing a Public IP) or a local private IP.
How to tell ?
Local devices start with certain numbers
192.168.xxx.xxx
10.xxx.xxx.xxx
172.16.xxx.xxx - 172.32.xxx.xxx
Further down the same info screen is the DNS server info if added
And the "router" IP.
This "Router" IP is the IP of the modem if it fits in to one of those three groups above.
If it shows the same number at the top spot as when you go here then the device is in Bridge mode and it is allowing the ISP issued IP to come through to your computer.
Tell us the info you see in this part of System preferences.
<hr>
Next.
The "ROUTER" IP if in a Local number as shown above is likely to be the default for accessing it's set up pages in a web browser.
A Linksys modem is likely to be 192.168.1.1
A Netgear is likely to be 192.168.0.1
This page is likely to be helpful if you device is listed.
IF it is click on it.
On the next page click on iChat.
This will tell you the defaults (if they have not been changed) to use.
It will go on to ell you how to set Port Forwarding.
DO NOT DO THAT AT THIS STAGE.
Tell us what you can find out.
Is there anything in the Port Forward settings ?
Does the device have UPnP in any of the menus ? and is it Enabled ?
Does it have Port Triggering as an option and is anything set there ?
<hr>
Re 1)
Back on the Mac go to System Preferences > Sharing
In here you will find the Firewall tab.
Click on It.
Does it say it is on ?
In the list are the Presets which may have ticks next to them (Even if the Firewall is Off) due to thinks set in the Services tab.
There is no Preset for the iChat login port, the AV ports or the Jabber ports. (there is a hangover preset from panther for Bonjour but the ports are on the wrong protocol and it misses one)
If the Firewall is On and you have not set the ports then you will need to.
The Instructions are here at the second pic.
Re NAT.
NAT is Network Address Translation.
It is the way your modem tells what data goes to which IP that is in use on the LAN it is controlling if it is the DHCP server. (it can also do it if you are Static i.e. No DHCP server and Manually given IPs).
Some devices like an Apple Airport Base Station NAT all data and do not require you to point it anywhere.
Most devices require that you point the data in some sort of way.
Port Forwarding is the oldest and most common.
This requires that you state which port the data should arrive on from the ISP side and which port is should go to on the LAN side listing an IP do go as well.
Generally this means that a port (say 5190 for iChat) can only be open for one IP (hopefully your computer).
Port Triggering also uses NAT.
DMZ (Demiltarised Zone) is an extreme form of Port Forwading that opens all the ports to one IP address but still uses NAT.
UPnP (Universal Plug and Play does not use NAT.
Read the whole of my page 4 for more info and guides on where to look.
10:41 PM Wednesday; December 27, 2006

PLEASE help me with Batch Output Filenames

Hi All,
I batch output hundreds of clips every day. And I'm stuck having to rename all of my files because Compressor appends the destination folder's name to the filename after Batch output. Can someone help me figure out how to retain the ability to output to my destination, but not have the destination folder name added to the file name. I spend more time renaming files than working!!!
Please help!
Thanks.

Prior to loading the batch, create a Custom Destination. In the process of creating your Custom Destination, you'll be given the option (in the Inspector) of what Compressor will call the output files, so make sure to use something like Source Media and nuke any appendages.
When you know choose the Destination for your Encodes, so long as you set a pre-defined destination - that is, something that is set prior to the import of your files - you won't have all that junk added to your file name.
Another handy thing that I do when I do mass encodes to to use Compressor's Default Setting and Default Destination settings - available under Preferences - to speed things up. With a default setting and destination set, I simply import my files (Compressor automatically adds the setting and destination for each file), save my batch, if necessary, then submit. I then adjust the Preferences settings for the next batch, then import those files. And so on...
Basically, as much as possible, the idea is to setup your targets (Destinations and Settings) ahead of time.
But be mindful: All this won't work without pre-set (usually Custom) Destinations and Settings. Thinking you can do this after you've imported your files is not the way to go...

Please help: DVC pro 50 capturing to QT to FCP

Hi,
What are the capture specs for best quality DVCPRO50? The DVCpro tapes will be capured elswhere and the client will deliver us a external drive with the files on it.
Offcourse they should be in best quality and not neccesarilly have to be re-rendered in FPC studio. So what's best?
- Uncompressed Quicktime files? Or are they way to heavy?
- Or uncompressed avi's? Not previewable... and heavy?
- Or Quicktime DV pal? Downgrading Quality. So i guess not.
- Or another codec wich is superb in quality for DVCPRO and light to handle
- Or the new QT H264?
Please help

I'm in the midst of a huge doc that was shot on dvc pro 50. The original editor dropped by the wayside, but they had rented a deck and captured all the material as dvcpro50. I inisisted that they back up the 2 disks of material and I've been editing away happily.
DVCpro50 is a digital format and if captured in it's native format, it's as good as it can possibly be.

Please help : how can i capture streaming tv on os x mavericks?

please help : can anyone help me to download streaming tv to my hard drive so i can watch it later? my os x is 10.9.3
thanks before for helping me.....

Have you already turned off the top two choices under the Parameters > Finder tab?
Killing window animation is the top check box under the Parameters > General tab.

Please Help, Issues when batch processing Multi Frame images in Fireworks

I hope someone will know how to do this and tell me where I am going wrong.
Objective 1
I have a large number of images that all have the exact same number of frames (4) and are all exactly the same size that I want to get resized, cropped and water marked (when I say 'watermarked I mean have my websites logo pasted in a specificlocation on each frame, I have my websites logo as a seperate .png file which I copy from).
Current Process
I create a command which will crop the image then paste my companys url/log onto the first frame, move it to the correct location on the frame then copy it again and then paste it onto each of the other frames, the command then resizes the image tot he exact proportions I want.
I start a batch process and use my command, making sure that I also export from the .png to animated gif (and I edit the settings to make it 256 animated gif).
Error 1
The process described above resizes and crops my images however it does NOT put the watermark in the correct place, it seems to put it int he right place on the first frame and then in a different place on all the followingn frames thus giving the effect of the watermark jumping around. Which is obviously NOT what I want.
Question 1
Please let me know what process I should be following to correct the Error 1 above.
Objective & Question 2
I want to do exactly the same thing as shown above but this time the files have a varying number of frames (from 2 to 45 frames (or instances as CS4 seems to call them)). Is there a way to paste my logo to the to the exact same location on ALL frames?
Other information
I have tried WHXY Paste extension and I can not see how to use that to solve the issue. I have also tried 'Paste in Place' however I can not see how to use the Paste In Place extension as it is not appering in my list of commands.
Many thanks in advance for your help.
Andy

Andy, you could start a batch process which will do most of the things you are asking for. THe batch process can be done using Fireworks. The right way to start is going to Archivo / Procesar por Lotes and then follow all the different option this tool has to offer. Yes, I know I gave you the names in Spanish but that is the way I use Adobe Fireworks.
I hope this was usefull for you!
Best regards,
Frank Meier | Curso Arreglos Florales

Urgent please - help trying to diagnose an issue?

Hi folks,
I've been burning DVDs for 7 years now and I've run into an issue I can't quite diagnose (and one I've NEVER experienced).
In short, I've had 4 clients in the last month come back because their discs were skipping at alternate points.
I'll describe what I use and what's happening.
I transfer video tapes (VHS, camcorder etc..) to DVD for clients - no issues there
I edit in FCP, export a .mov (non-self-contained) then take that file and use Bitvice to create the m2vs (sorry...I don't use compressor b/c it's terrible at
using all 4 cores whereas BV does it automatically).
create my DVD build in DVD SP with the templates I created a long time ago
burn using Toast Titanium 10 - usually at full DVD 8x's speed.
I use Maxell DVD-Rs - the same brand I've used for years...no problems. Also I've used discs from different carousels over the last month so I don't think it's a bad batch of discs. These discs have been flawless for me.
For the last client, I made 3 box sets of 3 discs each. Only 1 box set - ALL 3 discs, had skipping issues. The other 2 complete sets are fine. I have 2 burners in my 2009 Mac Pro.
I can't, for the life of me, figure out why discs are skipping. I've been verifying each burn in Toast with no apparent issues.
She's returning the skipping box set for me so I can somehow analyze what's going on.
At first, I thought maybe my bitrate was too high - max of 5.8 + the audio - so it should be fine) BUT, if my BR was the issue, why won't the other discs skip?
Maybe it's my burners? Maybe a sign of skipping discs is a DVD burner showing signs of a fail?
ANY help would be so grateful b/c it's the Christmas rush and I'm about to burn 12 discs x 2 for another client. The builds are ready, but I'm scared to start burning.
It's one thing to fix an issue for a client, but for a brand new client, it's far from professional to have skipping discs.
I'd buy new burners in a heartbeat if I knew they were the issue.
My process as been flawless in the past
Cheers,
Keebler

Hi Keebler - sorry to hear you're having probs.
There are lots of reasons why discs skip - bitrate is just one. Did you use AC3 audio? Are there any other files on the disc besides the VIDEO_TS folder?
When you get the discs back, check the surface very carefully, and try them in lots of different players too - you may find it is a player issue, not a disc issue. Remember, you are burning DVDs and for the most part they will work almost everywhere, but it is not 100% guaranteed. Only a DVD-Video disc, professionally replicated and produced is able to boast 100% compatibility with the spec... and even then there are some players where they don't work too well!
Have you added labels or anything like that (I sincerely hope not...)?
Did you leave 'Lossless Linking' checked when building? You should do so if you are not making a master for replication, but just making a file for Toast.
Have you tried burning from within DVDSP? Toast is very very good, but it does allow you to push the boundaries a little. For example, many times DVDSP has complained to me about disc capacity, but Toast never does. It'll let you burn just that little bit more, and this might be a problem in some players.
Did you leave the AUDIO_TS folder in place? Strictly speaking it isn't required but the DVD Spec says it ought to be there, and some players will check for it, I believe. It is always empty when making a video based DVD - it is there because audio DVDs are also part of the spec and would use this folder.
Are you certain your media is good? Have you tried any other brand?
Have you cleaned your burner recently? I don't think this will be the issue as it would probably fail to burn if it was dirty... but you never know!
FWIW I know Bitvice is very good, and often recommend it, but have you tried Compressor recently? I know it doesn't use all the cores, but it is much better than it used to be. You should have a look at the latest version.
Finally, have you spoken to the guys at Bitvice? It is unusual for there to be a problem, but if there is an issue with encoding they will know how to fix it and are able to give you the best advice. You might find a call to them saves you time and effort and keeps you sane! Roger Andersson is very knowledgeable and I find him great at supporting his product.

Please help-Trying to compress to Mpeg-2 for Convention, also resizing issues

Hello,
I just recently finished making an AMV in Adobe Premiere 5.5, and I am having trouble trying to figure out how to compress it into an Mpeg-2 source for a competition/convention.
I also have these massive black borders on the side of my video that I know is probably due to improper resizing on my part, and although I have tried to remedy this with a new avisynth script of the exported uncompressed AVI (before compressing to MPEG-2), whenever I try to run the avisynth script in either VirtualDubMod or TMPGEnc (the converting program recommended by: http://www.animemusicvideos.org/guides/mpegforcons/) it crashes, although the original video does work.
This is the avisynth script I have created for the post-video:
FFVideoSource("C:\Users\Freeman\Desktop\Fight the Power.avi")
FFCopyrightInfringement("C:\Users\Freeman\Desktop\Fight the Power.avi")
AssumeFPS("23.976")
SSRC(48000)
LanczosResize(720,352)
AddBorders(0,64,0,64)
per the recommendations from the guide listed below
I do not know if the resizing I have set up in the new avisynth script will fix my resizing issues, and I would like to improve that as much as possible, so if someone could clarify for me, that would be greatly appreciated.
You may also notice some audio issues throughout the video, however on further playback this never appears to happen in the same place. I believe this is caused by poor audio quality, and I have a friend of mine working on setting up a lossless source that I will try to recompress with the video before friday, however if someone else might know what is causing this, any advice would be greatly appreciated.
Here is the current MPEG-2 I have, however for obvious reasons, I do not consider it acceptable as of yet:
http://www.megaupload.com/?d=IIKYWRXF
The original export from Premiere is Microsoft AVI Uncompressed, and then attempted to convert to MPEG-2 (I tried multiple settings, they all have the same sizing issues), and as I said before, no matter what I try to do with the avisynth script, it crashes.
I have even tried taking out every line from the new avisynth script except for the first two detailing the location of the video and audio, however this does nothing, it still crashes.
I had to convert all my original source avisynth scripts to AVI files (that are massive, as I am editing from 52 episodes of Fullmetal Alchemist: Brotherhood), and so editing the original scripts is impossible at this point, because to my knowledge, that would mean I would have to reconvert them all to AVI, which took over 16 hours, and then that would probably make me have to re-edit this entire video (which if you look at it, based on length and how much work I've put into it: is impossible, especially given the time constraints).
So anything that I can do to fix this will have to be done to the export from Premiere, unless there is a way to work with the AVI's that I made from the avisynth scripts.
The source is primarily 16:9 DVD (Fullmetal Alchemist) and very few parts from a 4:3 DVD (Naruto). (You can recognize these parts in the video, it is whenever someone is rowing in a boat during the lyrics "Row Row")
The avisynth script for all the fullmetal alchemist DVD's is as follows:
mpeg2source("F:\DVD RIPS\Music Video Rips\Brotherhood\Disc 1 (1-7)\MainMovie\FMA_BROTHERHOOD_P1_D1\FMAB 1-7.d2v", cpu=4)
ConvertToYV12()
Spline36Resize(848,480)
#TTempSmooth()
FastLineDarkenMod()
LSFmod(strength=120)
LUTDeRainbow()
And the avisynth script for the one Naruto DVD is as follows:
mpeg2source("F:\DVD RIPS\Music Video Rips\Random\Row Row\MainMovie\ROW ROW\VTS_01_1.d2v")
TFM()
TDecimate()
Spline36Resize(848,636)
Crop(0,78, 0,-78)
These recommendations came from what I could figure out from:
http://www.animemusicvideos.org/guides/avtech31/
If anyone is curious, the song is "Libera me from Hell", and it is 44100 from what I could tell when I ran it in WINAMP (I converted it from mp3 to wav through WINAMP, if there is a better way that I am unaware of, please let me know).
I know this is extremely long, and thank you anyone who has taken their time to look through it, it is greatly appreciated.
The deadline for this is friday (5/20/11), so I need help with this ASAP and thanks,
Dexter

Dexter,
Those "black borders," if they are visible in the Program Monitor, are most likely due to a mis-match between the Source Files and the Sequence Preset.
If they are only showing up upon Export, then there is likely a mis-match between your Sequence and your Export, and could be either with the Aspect Ratio, or if using non-square pixels, the PAR (Pixel Aspect Ratio).
I'll defer any commens on AVISynth to the experts here.
Good luck,
Hunt

Adobe Photoshop CS3 Will Not Install PLEASE HELP TRIED EVERYTHING

I downloaded from Adobe the Photoshop CS3 Extended Trial directly from Adobe. (BTW I am on Vista 32)
The first time I tried installing, ADBEPHSPCS3_WWE.exe successfully unpacked, I successfully transitioned to the Adobe Photoshop CS3 installation, and it appeared to install. After 30 minutes or so, the installer finished and simply said that shared components had installed but the Photoshop CS3 Component install failed.
I always got in the log Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.MFCLOC,version="8.0.50727.163",type="win32",publicKeyToken="1fc8b3b9a1e18 e3b",processorArchitecture="x86"'. Please refer to Help and Support for more information
This, I know, is everyones typical problem.
I turned off firewall and antivirus.
I uninstalled ALL Adobe and Macromedia programs, including Flash and Acrobat.
I used Windows Install Cleanup Utility to remove them.
I downloaded the CS3 Clear from Adobe and cleared at levels 1, 2, and 3.
I created the Administrator account on my computer and tried everything on the Administrator account.
I tried installing Photoshop CS3 with compatibility mode for XP SP2.
I tried:
1. Open an Administrator command prompt by right clicking on Start -> All
Programs -> Accessories -> Command Prompt and selecting "Run as
Administrator" and clicking "Allow" for the elevation prompt
2. In the command prompt, type the command below
fsutil resource setautoreset true C:\
3. Reboot the machine
I tried:
Get command prompt up. It has to be run with admin rights so save yourself some time and run it this way.........Start/programs/accessories/.....right click command prompt and click run as administrator.
Then paste these commands in 1 after the other
regsvr32 vbscript.dll (THEN PRESS ENTER)
and
regsvr32 jscript.dll (AGAIN PRESS ENTER)
I even tried installing in Safe Mode but the CS3 setup would not initialize.
I do not know what else to do. I have CS2 which I will use, but I was really hoping to move to CS3 which is supposed to be better and faster. Does anyone know anything else to do? I am not a computer noob but I am not about to reinstall Vista. If anyone has any suggestions they would be greatly appreciated.

I was in the same predicament and after spend many hours over several days trying a multitude of things I finally found an easy fix (below):
========================================
Assuming you have Internet Explorer 7 go to:
Tools/Internet option/Advanced
Click the Reset dialog box. This will bring IE7 back to its default settings. You should reboot your computer. After logging back into Windows load IE and let it take you though its initial setup. When you are done close IE and install Photoshop.. This worked for me,,, hopefully it will work for you!

Please Help! How to capture logged on user id and use it in applications

Friends,
I have created a procedure to view account balance which takes userid as parameters and displayes his latest account balance.
I have put an URL in my page. but I am not able to capture the current logged on user id so that I can pass it to my procedure.
reply for this question would be of great help to me, because all y applications require passing user login id.
Thanks in advance.
Murthy

I have read this in Oracle Metalink, but I haven't tried it yet.
Hope this will help !
select * from portal30.wwctx_sso_session$ where trunc(session_start_time) = trunc(sysdate) and
active = 1 and IS_LOGGED_ON = 1
This should give you the logged in users..

Please help me locate screen captures on my MacBook Pro.

Does anyone know where MacBook Pro 2011 stores screen or image captures after using shift,control,command keys?
Before I updated to 10.9 it used to store captured images on the desktop. - Thank you in advance for your help.

Thank you for your response Eric but nothing is saved to the clipboard. This is definitely a problem caused by the upgrade. If others have similar issues please post them. The procedure to capture an image should remain the same along with the same key commands. It even appears to capture the image with sound effects of saving the file but the clipboard or desktop remains empty. Any thoughts?

Please help: trying to install Oracle 8.1.6.0 on Mandrake 8.1

Hi, I am trying to install Oracle8i that comes with "Oracle for Linux Starter Kit" on Mandrake 8.1. Could someone please give tips or pointer how i can accomplish this? The Universal Installer starts fine, but then a dialog pops up about compiling sqlplus. here is a piece from the log file:
Calling action unixActions1.7.0.17.0 make
     installMakePath = /usr/bin/make
     installMakeFileName = /usr/oracle/sqlplus/lib/ins_sqlplus.mk
     installTarget = install
     undoMakeFileName =
     installArguments = ORACLE_HOME=/usr/oracle,
     logFile = /usr/oracle/install/make.log
     undoTarget =
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target install of makefile /usr/oracle/sqlplus/lib/ins_sqlplus.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target install of makefile /usr/oracle/sqlplus/lib/ins_sqlplus.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target install of makefile /usr/oracle/sqlplus/lib/ins_sqlplus.mk
Exception Severity: 1
Calling action unixActions1.7.0.17.0 make
     installMakePath = /usr/bin/make
     installMakeFileName = /usr/oracle/network/lib/ins_net_client.mk
     installTarget = install
     undoMakeFileName =
     installArguments = ORACLE_HOME=/usr/oracle,
     logFile = /usr/oracle/install/make.log
     undoTarget =
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target install of makefile /usr/oracle/network/lib/ins_net_client.mk
Exception Severity: 1
*** Cancel Dialog: ***
User selected: Stop installation of all products.
Error in invoking target install of makefile /usr/oracle/network/lib/ins_net_client.mk
Unable to read /usr/oraInventory/oraInventory/Contents/OracleHomesList.ser. Some inventory information may be lost.
Unable to read /usr/oraInventory/oraInventory/Contents/LibsList.ser. Some inventory information may be lost.

I had the same problem with Oracle 9i on Mandrake 8.1. I am not sure if the same fix will work or not. See my 9i on 8.1 notes at:
http://members.home.net/joseph.j.flynn/oracle.htm
snip---
You will get a link error after all of the copying and unpacking has been done somewhere in disk 3. Leave the error message up on the screen and go edit the $ORACLE_HOME/bin/genclntsh script. Blank out the LD_SELF_CONTAINED env var. Save and execute the script. Hit the retry button on the installer. The alternative approach to this involves downgrading the binutils but that seemed to get awfully messy to me. (thanks to a post from Helmut Seruega for this fix)

HT201209 Please help, tried to redeem an App Store gift card for $15.00. It worked when I put it in earlier but I was still charging purchases to my credit card. I did not see how to switch over to the gift card. Credit is gone and code now invalid. W

I need help with redeeming a $15 App Store certificate. I tried to redeem earlier in the day and it was credited to my account. I could not figure out how to switch payment from my credit card to the gift card credit. Later on in the day I see the credit is completely gone and now the card is invalid. Nothing was purchased with the gift card so I want to know where the credit went. I also have$5 credited to my Apple ID from a past gift card that I can't access. What can I do. Is there a customer service number???

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Please help, trying to get SIM to work

Hi, I sure someone can help. I am from Canada and traveling abroad in Germany. My carrier in Canada is Koodo and Ye iPhone comes unlocked. However, every time I put in my German sim card Fonic, it sends me to the activation process and gives me this error
Only compatible SIM cards from a supported carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported carrier's store to receive a replacement SIM card.
I don't understand. This sim card is desIgned for the iPhone 4 and iPad it says on the box. Now I have a 4S but one would think that should not matter. Any thoughts? Thank you I'm advance for any help

Checking this support document http://support.apple.com/kb/HT1937 I do not see where that is a supported carrier of the iPhone. While the document also states all phones are locked to carriers, many will unlock them. Unless, this is a new carrier that is not listed on the sheet.
The error you are getting is indicitive of a locked phone. How was this phone unlocked. Many unsupported carriers will do software unlocks on phones.
You would have to check with your carrier about the unlock status of the phone.

Please Help - Trying to get contents of column (RepeaterRenderer)

Hi,
I am trying to write the contents of the table to a file but without the markups. So, I am trying to obtain the contents of the column when using RepeaterRenderer. I think this is where the contents is but I have no idea how to extract it.
protected void rowBody(FacesContext context, UIData data,
ResponseWriter writer) throws IOException {
// Iterate over the UIColumn children of this UIData component
Iterator columns = data.getChildren().iterator();
int currentColumn = 0;
while (columns.hasNext()) {
// Only process UIColumn children
UIComponent column = (UIComponent) columns.next();
if (!(column instanceof UIColumn)) {
continue;
Iterator contents = column.getChildren().iterator();
while (contents.hasNext()) {
encodeRecursive(context, (UIComponent) contents.next());
currentColumn++;
So, what I am trying to do is something like "writer.write(contents.toString())" where the writer would be a Fileoutputstream object instead of a ResponseWriter. However, since contents is of type Iterator, I have no idea how do I extract the contents of the table.
Any help and suggestions are appreciated.
Thanks in advance!

Be careful when you copy the address as there is a space between
/src/compone" "nts/..... and it seems to be added even though it is not there when I posted the message.
Thanks.

Please help, trying to Batch Capture in CS4

Similar Messages

Maybe you are looking for