Please help, trying to get SIM to work

Hi, I sure someone can help. I am from Canada and traveling abroad in Germany. My carrier in Canada is Koodo and Ye iPhone comes unlocked. However, every time I put in my German sim card Fonic, it sends me to the activation process and gives me this error
Only compatible SIM cards from a supported carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported carrier's store to receive a replacement SIM card.
I don't understand. This sim card is desIgned for the iPhone 4 and iPad it says on the box. Now I have a 4S but one would think that should not matter. Any thoughts? Thank you I'm advance for any help

Checking this support document http://support.apple.com/kb/HT1937 I do not see where that is a supported carrier of the iPhone. While the document also states all phones are locked to carriers, many will unlock them. Unless, this is a new carrier that is not listed on the sheet.
The error you are getting is indicitive of a locked phone. How was this phone unlocked. Many unsupported carriers will do software unlocks on phones.
You would have to check with your carrier about the unlock status of the phone.

Similar Messages

Please help trying to get "Remote" app to prompt me for passcode

I am pretty good at these things and for some reason after installing the app on my iPhone 3G I am unable to use the passcode thats given because I get no prompt on the sidebar to enter it in.
I see a lot of complaints in the app store about this not working well. Sharing in iTunes is turned on Firewall I have allowing incoming connections. Maybe I'll wait for a update.
Thanks in advance.

First of all, are you using Windows or MAC? Second if using Windows XP, try turning off the Firewall Completely:
1-Right click on My Network Places and click properties
2-Right click on either Local Area Connection or Wireless Network Connection and click properties
3-Click on the Advanced Tab, click on Windows Firewall Settings,
4-Click on the Off balloon and click Ok.
If you want to check the exception list to make sure iTunes can pass through the firewall click on the Exceptions Tab and make sure that iTunes is checked and click Ok.
If you are using a Mac I can't really help, and if you are using Windows Vista I can post some options to try as well. Hope this helps!

Please help - can't get itunes to work

Hey - I would appreciate any help with the following:
I have already downloaded itunes to my desktop and successfully created an account and downloaded to my ipod nano...however, today, suddenly, I can no longer do any of that - I logged in to the itunes store, but every time i click on the itunes store "is open" button, nothing happens - i do not currently have my nano plugged in, is that a problem, or am I missing something?

just unplug it i have that problem when i plug my ipod in and i do my thing and try to unplug it and nothing happens and my ipod is still plugged in and itunes wont let me unpug it. just unplug your ipod. it does not harm it. this is becuase itunes does not see it so there for it is not really connected. as for your itunes not working try reinstalling it. i hope i have helped

Please Help - Trying to get contents of column (RepeaterRenderer)

Hi,
I am trying to write the contents of the table to a file but without the markups. So, I am trying to obtain the contents of the column when using RepeaterRenderer. I think this is where the contents is but I have no idea how to extract it.
protected void rowBody(FacesContext context, UIData data,
ResponseWriter writer) throws IOException {
// Iterate over the UIColumn children of this UIData component
Iterator columns = data.getChildren().iterator();
int currentColumn = 0;
while (columns.hasNext()) {
// Only process UIColumn children
UIComponent column = (UIComponent) columns.next();
if (!(column instanceof UIColumn)) {
continue;
Iterator contents = column.getChildren().iterator();
while (contents.hasNext()) {
encodeRecursive(context, (UIComponent) contents.next());
currentColumn++;
So, what I am trying to do is something like "writer.write(contents.toString())" where the writer would be a Fileoutputstream object instead of a ResponseWriter. However, since contents is of type Iterator, I have no idea how do I extract the contents of the table.
Any help and suggestions are appreciated.
Thanks in advance!

Be careful when you copy the address as there is a space between
/src/compone" "nts/..... and it seems to be added even though it is not there when I posted the message.
Thanks.

Please help. Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

Please help. Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

Sara,
Please see my answers in bold below.
What browser are you using? Try clearing the cache, or using a different browser. N/A
Are you converting from within Reader, or directly via the ExportPDF website. Within Reader.I disabled the OCR and this did not work either. Try converting from within Reader, and disable OCR as detailed in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel.
Are you on a networked computer? Make sure that there aren't any firewall/proxy settings that are preventing you from uploading files to the Internet. Not having problems uploading the file--that works fine.
Make sure the file is within the file-size limit of 100 MB. It is <40.
I get the error message, "File failed to be converted using Adobe ExportPDF online."
Thanks for your help in advance.

I have been able to access a site regularly but in the last few days get a message: "cookies required to access this site." please help, I use this site for work daily:)

I have been able to access a site regularly but in the last few days get a message: "cookies required to access this site." please help, I use this site for work daily:)

Goto > Settings > Safari... Enable Cookies > Always
Good luck!

HT1766 I Have tried to update to iOS 7 but the iPad has locked on the Terms and Conditions page .I cannot agree to the conditions.Ideas please on how to get the iPad working again.

having attempted to upgrade to iO7 latest op system,the Ipad has stuck on the Terms & conditions page.It will not accept my agreement to terms and conditions or allow me to read them.
Ideas please on how to get it to work again,which will have to be via my lap top!
It sound as if the iPad is woking in the background-i.e.receiving eMails.

Reset iPad and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

I have a Power Mac G4 and i am trying to get it to work with my LCD

I have a Power Mac G4 and i am trying to get it to work with my LCD Monitor/TV. The connection on the computer is DVI and the connection on the Monitor is DVI. The Monitor says in the manual to hook up computers using the DVI connection. When I connect the too the monitor says there is no video input. I tried changing the settings on the monitor from PC mode to DVI mode and nothing. I have also tried changing the display on the computer to a couple of different settings and nothing. Please Help?

Hi-
A little more info please.
What model G4?
What Graphics card?
What OS?
What model/make of monitor?
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, RaptorSATAATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, 23" ACD, Ratoc USB 2.0, QCam Ultra, Nikon Coolscan

Trying to get PM to work with our upgrade process

We are trying to get Personality migration working properly in our
environment to migrate our users from 2000 to XP. We have been able to
get the files to migrate properly, but are having issues with the
application settings. We have installed PM from Zenworks 7 which is the
Computer Associates version. When we are setting up the template in the
application area, there does not seem to be anything there. For example,
how do we set PM to gather the IE settings but not gather the proxy
settings? Also, where would I find better documentation on this product?
THanks in advance for any help.
Brian

Brian,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

My iMessage for my Macbook Air is not working. It says no delivered with a red ! next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time. I have done about everythin

My iMessage for my Macbook Air is not working. I have updated everything. My system is running on OS X Yosemite Version 10.10. When I go to send a message, it says no delivered with a next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time and updating FlashPlayer. I have done about everything I can think of. Any help would be greatly appreciate!

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

In my mac i dont create icloud keychain but it is asking password please help me to get out of this problem

In my mac book pro i don't create icloud keychain. But it is asking password.Please help me to get out of this problem.In OS X Mavericks

Hi, nportillo,
The next time you attempt to reach Skype Customer Service, try again using a different web browser and choosing a different path through the various drop-down menu options presented. Do not choose the obvious - you have already established that path is not working. Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also impede reaching an agent.
Skype is aware of problems reaching their customer service unit via the website, however people are getting through. I have flagged your report for follow-up by those to whom I report.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Please help me to get Oracle 10.2.0.5 software for 64 bit Windows 2008 R2

Hi All,
Subject: Please help me to get Oracle 10.2.0.5 software for 64 bit Windows 2008 R2 operating system.
I am looking for Oracle 10.2.0.5 software to install in windows 2008 server (64 bit) R2. I tried with oracle download repository but unfortunately I couldnt find this software. In the below link I can see the product Oracle 10.2.0.5 - 64 bit (Itanium). I have tried to download and install in the server but I received in-compatible error message.
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
From the oracle support certification site I have found that the Oracle 10.2.0.5 is the compatible version to installed in windows 2008 server(64) R2.
I am trying very hard to find Oracle 10.2.0.5 - 64 bit. Can you please suggest me where I can download this software.
Please do the needful.
Regards,
Jame

Hi;
Which means, do i need to install 10.2.0.4 and then to upgrade 10.2.0.5 using patchset?10.2.0.1 is base relase 10.2.0.x is patchest. 10.2.0.5 cover previous patchest errors which mean you do not need install 10.2.0.4 than upgrade it 10.2.0.5
Regard
Helios

My wifi Don,t work on iOS 6 iPad 3 Please help me, My wifi Don,t work on iOS 6 iPad 3 Please help me

My wifi Don,t work on iOS 6 iPad 3 Please help me, My wifi Don,t work on iOS 6 iPad 3 Please help me

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
Try This - Renew IP Address:
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Just trying to get the basics working...

Hi,
I have been trying to get just the basics working, and have spent almost all day, and now into the night, trying to get it to work....with no logical sucess.....
All I am trying to do, using VB.net 2008 with Crystral Reports 2008, is to disply my report on a web page using the crystalreport viewer in Visual Studio.
I created a report in CR2008, and during the process of creating the report I had to create a connection to the SQL Server 2005 database and set a parameter on my report to show the data for a single record from the database.
The issue is that the connection string I use in CR2008 is NOT the connection string that is to be used in the browser, so the first task I have attempted to do is to set new log in details for the report. I just want to use a trusted connection.
I have searched high and low on the internet, and taken a look at the samples provided on this site.
My code, as it is at the moment for setting the connection for the report at run time is at the end of this email: ( I got this code from the samples on this site)
The problem I have is if the integratedsecurity set to true(as I need it) then the myconnectioninfo.servername and database name are totally ignored. I have changed them to be just randon characters, which should result in the report not being able to connect, yet the report still works fine.
No errors are generated at all, so its very confusing. I know the code is being executed via breakpoints and stepping through the code, but it would seem that it makes no difference.
What am I doing wrong here.....
Private Sub ConfigureCrystalReports()
        Dim reportPath As String = Server.MapPath("CrystalReport1.rpt")
        myCrystalReportViewer.ReportSource = reportPath
        Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
        SetDBLogonForReport(myConnectionInfo)
        myConnectionInfo.ServerName = "SQL1"
        myConnectionInfo.DatabaseName = "MPx
        ' myConnectionInfo.UserID = "limitedPermissionAccount"
        'myConnectionInfo.Password = "1234"
        myConnectionInfo.IntegratedSecurity = True
    End Sub
    Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
        ConfigureCrystalReports()
    End Sub
    Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo)
        Dim myTableLogOnInfos As TableLogOnInfos = myCrystalReportViewer.LogOnInfo
        For Each myTableLogOnInfo As TableLogOnInfo In myTableLogOnInfos
            myTableLogOnInfo.ConnectionInfo = myConnectionInfo
        Next
    End Sub

Hi,
Couple of things:
1) Please make sure that you are using CR2008 with SP0 at least. Dlls versions should be 12.0.2000.0 and File version 12.0.1100.0.
2) Please make sure that the destination database can be accessed from that machine. You can create a UDL file or a new report hitting the target database to see if we can see data into it.
3) Please make sure that we are not changing the schema of the report.
4) Can you try this code mentioned below:
ConnectionInfo crConnection = new ConnectionInfo();
               crConnection.ServerName="Server";
               crConnection.DatabaseName="DB";
               crConnection.UserID="uid";
               crConnection.Password="pwd";
                        crConnection.IntegratedSecurity=true;
               crReport.Load(Server.MapPath("CrystalReport1.rpt"));
               Tables crTables=crReport.Database.Tables;
               foreach(CrystalDecisions.CrystalReports.Engine.Table crTable in crTables)
                    TableLogOnInfo crTLOI = crTable.LogOnInfo;
                    crTLOI.ConnectionInfo=crConnection;
                    crTable.ApplyLogOnInfo(crTLOI);
                    crTable.Location=Database.Owner.Tablename
               CrystalReportViewer1.ReportSource=crReport;
Regards,
AG.

Trying to get video chat working between mac and pc

im trying to get video chat working between a mac and pc
pc-running xp with aim 6.0
will updating to aim 6.1 fix this ?
we can text chat with no problem
we can not audio or video chat
any help would be great
thanks santini

Hi Z,
Lets check the Port Forwarding at your end.
Does this Zyxel have UPnP at all ?
If so use that and disable the Port Forwarding.
If not then these ports need to be forwarded.
I will list with Protocols as some device need these.
TCP 5190 for AIM Login and text chats (can be substituted for 443)
TCP 5220, 5222 and 5223 for Jabber (the last is for OS X servers and GoogleTalk)
TCP 5298 this is part of the Bonjour set up for iChat if you have other Macs
UDP 5060 this is for the SIP negotiation that iChat needs
UDP 5678 this is where the visible invites come and go out on.
UDP 5190 for AIM file sending and Group chats
UDP 16384-16403 This group of 20 ports is where any Audio or Video chat takes place.
As the 443 port is below 1024 (the NAT threshold) you should not have to Forward this.
10:23 PM Monday; August 13, 2007

Please help, trying to get SIM to work

Similar Messages

Maybe you are looking for