Please help - Unable to get the cluster database home page

I have both the RACDB1 & RACDB2 instances running (and the 2 listeners also) . But I do not get the the cluster database home page. Instead I get startup/shutdown page. EM later confirms both instances are up.
But how do I connect to the RACDB database to perform any admin work from within EM ?
Any help is appreciated.
Thank you.

Ehm. Before placing? At that point ID doesn't know anything at all about the PDF.
var myPDFFile = File.openDialog("Choose a PDF File");
myPDFFile.execute();
Then check the lower left bottom -- it should display the page size.
Why not first place the file and then check its size? You can always move it to the right position after placing.
Oh, by the way: "a PDF" doesn't have a "page size". Each single page in a PDF can have a page size of its own.

Similar Messages

Cannot get 'Go to Database Home Page' to work on 10gXE after installation

Hello,
I recently installed Oracle(univesal) 10g XE onto my PC. I tried to go to the Database Home Page and am not able to do so. When I click the 'Go to Database Home Page' button, a browser appears with the message 'page cannot be displayed'.
I am using Windows 2000 and have installed the loopback adaptor.
Thanks,
Shane

You might want to search this forum for keywords "10gXE Database Home Page" - this has been discussed many, many times.
In addition, Virag has such an excellent troubleshooting site, it is simply a waste of time to walk through the steps here - go to http://viragsharma.blogspot.com/search/label/oracle%20XE first!

'unable to join the network...' wifi network error ! please help, 'unable to join the network...' wifi network error ! please help

im on pay as you go.. still trying to set up wifi to my home network.. im putting in the password (sky broadband) and i keep getting the message
Unable to join the network...
driving me crazy now - please help !

Other possibilities:
Your router firmware is out of date. Check the manufacturer's website for an update
You have MAC (Media Access Control) filtering enabled on the router, that restricts access to "known" devices and the new iPhone is not on the table of known devices
Your router has a setting limiting the number of simultaneous allowed devices
Your routers SSID ("name") is still the default (e.g., LINKSYS, DLINK, NETGEAR, etc). Your phone has encountered other routers with the same name as you have traveled, and the phone is confused as to which router is the real one. If your router's name is still the default you should change it.

Please help me. i get the following error " error getting license, server communication problem, E_ADEPT_DOCUMENT_TOO_SHORT

HI,
I am using this for the first time. I have downloaded a Adobe E-book from my library. I installed Digital Edition 4 and i keep on getting this message when i try to get the book from my pc downloads. Please help me overcome this issue
regards,
kapil desai

Please try de-authorizing and authorizing again.
Steps to De-authorize
1) Switch to Library Mode by clicking Library button
2) Select menu item Help--> Erase Authorization or Press Ctrl+Shift+D
3) Click Erase button to De-authorize
Steps to Authorize
1) Launch ADE
2) Switch to Library Mode by clicking Library button (if you are in Reading Mode)
3) Select menu item Help-->Authorize Computer or Press Ctrl+Shift+U
4) Enter the valid credential to Authorize
Hope this solves your problem.

Please Help: I cannot get the Airport Extreme settings right with AT&T DSL

AT&T Motorola 2210 DSL Modem.
I have tried both bridged on/off and different configurations on the Airport Extreme, but I cannot get online. I am out of ideas. I called AT&T tech support and because it's not one of their wireless routers, they wanted to charge me to troubleshoot, ridiculous.
Please help

If you find that the Double NAT setting will not allow the PS3 to connect correctly, your only other option is to change the configuration of the modem to either +PPP on the computer+ or +Bridge Mode+ and then configure the PPPoe service on the AirPort Extreme.
I assume that you have already set the modem up using the default IP address of 192.1681.254 (I think this is it). You'll need to locate the page to change the settings and it will probably have a red warning sign on it. Either PPP on the computer or Bridge Mode will work. Update to save settings.
Then under the Internet icon in AirPort Utility:
Connect Using = PPPoE
enter your user name (probably your email address with the service provider)
enter your password
Leave the Service Name area completely blank
Connection = Always On
Disconnect if Idle = Never
Update to save settings.
That will eliminate the Double NAT issue and the PS3 should get a clear indication. As I said, when you have the PPP connection on a device other than the modem, you may see an occasional drop and restart of your connection. That seems to be a fact of life with this type of setup.

Please help, i cannot get the CD out of the drive! thanks

I was adding music to iTunes with some CDs, I am not able to get the CD out now, the eject selection is grayed out so i am not able to use it.....how do i get the CD out?!!

Quit iTunes. Then you can drag the CD icon to the Trash.

HT204088 Hello. I can't log into iTunes Store. I made a purchase this morning for gold in csr classics and it charged my card twice. Can you please help me either get the gold for the game or recredit it back to my card.

Hello there
We also looked at the account for other purchases over a year ago or less and they had charged my card twice for the same purchase. They said they would let me know and I haven't received an email to confirm. It did it today also I purchased 9.99 of gold on the csr classic racing and it didn't give me the gold so I did it again and it gave me the gold. When we called our card company it was charged twice. And help would be great. Thank you.

If you haven't received the item, or if you've been overcharged, then try the 'report a problem' page to contact iTunes Support (these are user-to-user forums) : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Unable to access the Dyn/admin Home Page

Hi ,
I am also facing the login issue to dynamo admin server .
I could able to logged into ACC(ATG Control Center) .But I am not able to access the dynamo admin server both for production and publishing server even entering the same credentials that i used for ACC.
Both the servers are up and running with out any issues .
Application server is weblogic server .
OS is Windows.
I am getting this error :
Make sure that you have the 'bin' directory for your JDK in your PATH variable before starting Dynamo and that you have enough swap space.
The detailed exception is: java.io.IOException: Cannot run program "javac": CreateProcess error=206, The filename or extension is too long.
I have set it correctly before installing ATG like this D:\Java\jdk1.6.0_45\bin; . Even though i am getting the same issue.
From your previous post .I got this . But had a doubt on this like where to add .I could not find this location.
#atg\dynamo\servlet\pagecompile\ExtendedJhtmlPageProcessor.properties
$class=atg.servlet.pagecompile.jsp11.JSPPageProcessor
javaCompilerClassName=atg.servlet.pagecompile.SunJavaSourceCompiler
I am not able to understand where it went wrong . Please tell me as i got strucked in this.
Thanks,
keerthi

Hi,
Thanks for your reply.
I tried as you said but even though its not working .
I did like this
In CIM :
Enter Ear File Name for Publishing with a Server Lock Manager
[[ATGPublishing]] > ATGPublishing.ear
-------WEBLOGIC ONLINE DEPLOYMENT MENU------------------------------------------
enter [h]elp, [m]ain menu, [q]uit to exit
Current runAssembler arguments :
-server ATGPublishing -collapse-class-path
Weblogic Admin Server must be running.
Top Level Module List:
DCS-UI.Versioned BIZUI PubPortlet DafEar.Admin DCS-UI.SiteAdmin.Versioned
SiteAdmin.Versioned DCS.Versioned DCS-UI Store.EStore.Versioned
Store.Storefront DAF.Endeca.Index.Versioned DCS.Endeca.Index.Versioned
Store.EStore.International.Versioned Store.Mobile Store.Mobile.Versioned
Store.Endeca.International Store.Mobile.REST.Versioned
*[D] Deploy Publishing with a Server Lock Manager ATGPublishing.ear to
Weblogic Online
[R] Register Datasources on Weblogic Online
[A] Add database driver to app server classpath
[P] Post Deployment Actions on Weblogic Online
[E] Edit runAssembler arguments
[O] Configure Another Server Instance
> D
-------DEPLOY PUBLISHING WITH A SERVER LOCK MANAGER TO WEBLOGIC ONLINE----------
enter [h]elp, [m]ain menu, [q]uit to exit
Create server instance ATGPublishing. View log file at D:/ATG/ATG10.2/home/
../CIM/ log/cim.log
|. . . . . . |
>> Created server instance ATGPublishing
Executing runAssembler for ATGPublishing. View log file at D:/ATG/ATG10.2/
home/../CIM/ log/cim.log
|. . . . . |
>> Ear created at D:/ATG/ATG10.2/home/../home/cimEars/ATGPublishing.ear
Deploy ATGPublishing.ear to weblogic. View log file at D:/ATG/ATG10.2/home/
../CIM/ log/cim.log
|. . . . . . . |
>> Application ATGPublishing.ear deployed to weblogic
>> File written to D:/ATG/ATG10.2/home/../home/servers/ATGPublishing/
startServerOnWeblogic.sh
-------WEBLOGIC ONLINE DEPLOYMENT MENU------------------------------------------
enter [h]elp, [m]ain menu, [q]uit to exit
Current runAssembler arguments :
-server ATGPublishing -collapse-class-path
Weblogic Admin Server must be running.
Top Level Module List:
DCS-UI.Versioned BIZUI PubPortlet DafEar.Admin DCS-UI.SiteAdmin.Versioned
SiteAdmin.Versioned DCS.Versioned DCS-UI Store.EStore.Versioned
Store.Storefront DAF.Endeca.Index.Versioned DCS.Endeca.Index.Versioned
Store.EStore.International.Versioned Store.Mobile Store.Mobile.Versioned
Store.Endeca.International Store.Mobile.REST.Versioned
In the cim.log file i found this kind of error :
**** info
Mon Aug 05 14:45:48 IST 2013
1375694148836
atg.cim.productconfig.appassembly.RunAssemblerExecutorTask
Executing runAssembler for ATGPublishing
**** info
Mon Aug 05 14:45:48 IST 2013
1375694148837
atg.cim.productconfig.appassembly.RunAssemblerExecutorTask
runAssembler -server ATGPublishing -collapse-class-path D:/ATG/ATG10.2/home/../home/cimEars/ATGPublishing.ear -m DCS-UI.Versioned BIZUI PubPortlet DafEar.Admin DCS-UI.SiteAdmin.Versioned SiteAdmin.Versioned DCS.Versioned DCS-UI Store.EStore.Versioned Store.Storefront DAF.Endeca.Index.Versioned DCS.Endeca.Index.Versioned Store.EStore.International.Versioned Store.Mobile Store.Mobile.Versioned Store.Endeca.International Store.Mobile.REST.Versioned
**** info
Mon Aug 05 14:45:48 IST 2013
1375694148844
atg.cim.task.ant.utility.AntLogger
**** info
Mon Aug 05 14:45:48 IST 2013
1375694148844
atg.cim.task.ant.utility.AntLogger
exec.runAssembler.bat.file.windows:
**** info
Mon Aug 05 14:45:49 IST 2013
1375694149047
atg.cim.task.ant.utility.AntLogger
     [exec] Assembly started.
**** info
Mon Aug 05 14:45:49 IST 2013
1375694149047
atg.cim.task.ant.utility.AntLogger
     [exec] Target application is D:\ATG\ATG10.2\home\..\home\cimEars\ATGPublishing.ear.
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151187
atg.cim.task.ant.utility.AntLogger
     [exec] Creating exploded ear file D:\ATG\ATG10.2\home\..\home\cimEars\ATGPublishing.ear.
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151187
atg.cim.task.ant.utility.AntLogger
     [exec] Initializing...
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151187
atg.cim.task.ant.utility.AntLogger
     [exec] Updating D:\ATG\ATG10.2\home\..\home\cimEars\ATGPublishing.ear.
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151187
atg.cim.task.ant.utility.AntLogger
     [exec] Before make meta-inf file.
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151188
atg.cim.task.ant.utility.AntLogger
     [exec] Making meta-inf file D:\ATG\ATG10.2\home\..\home\cimEars\ATGPublishing.ear\META-INF
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151188
atg.cim.task.ant.utility.AntLogger
     [exec] Creating application.xml...
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151305
atg.cim.task.ant.utility.AntLogger
     [exec] Creating Ear file MANIFEST...
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151305
atg.cim.task.ant.utility.AntLogger
     [exec] Importing classes...
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151306
atg.cim.task.ant.utility.AntLogger
     [exec] Collapsing CLASSPATH into lib/classes.jar
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151405
atg.cim.task.ant.utility.AntLogger
     [exec] CAUGHT AT:CONTAINER:atg.appassembly.ApplicationAssemblerException: An IOException occurred while generating the jarfile D:\ATG\ATG10.2\home\..\home\cimEars\ATGPublishing.ear\.\atglib\classes.jar; SOURCE:java.io.FileNotFoundException: D:\ATG\ATG10.2\CommerceReferenceStore\Store\Endeca\Base\lib\classes.jar (The system cannot find the path specified)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151405
atg.cim.task.ant.utility.AntLogger
     [exec]
at atg.appassembly.util.ClasspathUtils.generateJar(ClasspathUtils.java:414)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151405
atg.cim.task.ant.utility.AntLogger
     [exec]
at atg.appassembly.util.ClasspathUtils.importClasspathLibs(ClasspathUtils.java:147)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151406
atg.cim.task.ant.utility.AntLogger
     [exec] Error(s) occurred : An IOException occurred while generating the jarfile D:\ATG\ATG10.2\home\..\home\cimEars\ATGPublishing.ear\.\atglib\classes.jar
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151406
atg.cim.task.ant.utility.AntLogger
     [exec]
at atg.appassembly.ApplicationAssembler.createUnpackedEarFile(ApplicationAssembler.java:196)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151406
atg.cim.task.ant.utility.AntLogger
     [exec]
at atg.appassembly.Main.main(Main.java:518)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151406
atg.cim.task.ant.utility.AntLogger
     [exec] SOURCE EXCEPTION:java.io.FileNotFoundException: D:\ATG\ATG10.2\CommerceReferenceStore\Store\Endeca\Base\lib\classes.jar (The system cannot find the path specified)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151406
atg.cim.task.ant.utility.AntLogger
     [exec]
at java.util.zip.ZipFile.open(Native Method)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151406
atg.cim.task.ant.utility.AntLogger
     [exec]
at java.util.zip.ZipFile.<init>(ZipFile.java:127)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151406
atg.cim.task.ant.utility.AntLogger
     [exec]
at java.util.zip.ZipFile.<init>(ZipFile.java:88)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151407
atg.cim.task.ant.utility.AntLogger
     [exec]
at atg.applauncher.core.util.DirectoryAndJarFileCollapser.handleZip(DirectoryAndJarFileCollapser.java:235)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151409
atg.cim.task.ant.utility.AntLogger
     [exec] Root Cause: D:\ATG\ATG10.2\CommerceReferenceStore\Store\Endeca\Base\lib\classes.jar (The system cannot find the path specified)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151409
atg.cim.task.ant.utility.AntLogger
     [exec] Cleaning Up.
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151507
atg.cim.task.ant.utility.AntLogger
     [exec]
at atg.applauncher.core.util.DirectoryAndJarFileCollapser.processFile(DirectoryAndJarFileCollapser.java:128)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151507
atg.cim.task.ant.utility.AntLogger
     [exec]
at atg.applauncher.core.util.JarFileCollapser.run(JarFileCollapser.java:366)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151510
atg.cim.task.ant.utility.AntLogger
     [exec]
at atg.appassembly.util.ClasspathUtils.generateJar(ClasspathUtils.java:500)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151510
atg.cim.task.ant.utility.AntLogger
     [exec]
at atg.appassembly.util.ClasspathUtils.generateJar(ClasspathUtils.java:411)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151511
atg.cim.task.ant.utility.AntLogger
     [exec]
at atg.appassembly.util.ClasspathUtils.importClasspathLibs(ClasspathUtils.java:147)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151511
atg.cim.task.ant.utility.AntLogger
     [exec]
at atg.appassembly.ApplicationAssembler.createUnpackedEarFile(ApplicationAssembler.java:196)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151512
atg.cim.task.ant.utility.AntLogger
     [exec]
at atg.appassembly.Main.main(Main.java:518)
**** info
Mon Aug 05 14:45:51 IST 2013
1375694151945
atg.cim.task.ant.utility.AntLogger
     [exec]
**** info
Mon Aug 05 14:45:52 IST 2013
1375694152449
atg.cim.task.ant.utility.AntLogger
**** info
Mon Aug 05 14:45:52 IST 2013
1375694152449
atg.cim.task.ant.utility.AntLogger
BUILD SUCCESSFUL
**** info
Mon Aug 05 14:45:52 IST 2013
1375694152449
atg.cim.task.ant.utility.AntLogger
Total time: 3 seconds
Thanks,
keerthi

Please HELP me with getting the right version of Adventure Works database

Hi,
I have SQL SERVER 2008 R2 installed with me. And i have downloaded 'AdventureWorks2008R2_Database' from msdn links only.
It is running fine.
Now the practise material i have with me is where employee table have columns precisely as in this link here 'http://technet.microsoft.com/en-us/library/ms124432(v=sql.100).aspx'. And the version which i downloaded and using doesnot have these.
So need help with actual version which would have all these columns.
Thanks

Hello,
That's link is to the documentation of Version 2008, in Version
2008 R2 the design has changed a little bit. Download the example for version 2008 is you Need exact that table design.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Could someone please help me with getting the sabnzbd daemon to start?

Hi everyone,
I'm a classic newbie. I managed to follow some instructions I found on the web to get sabnzbd to install (via Yaourt), and when I invoke it from the command line, it works fine.
I've read that you can get it to start as a daemon, which would be really good. Could someone please explain how this should be done?
Where do I need to put the sabnzbd.init file?
What about the sabnzbd.confd file?
I'm okay enough with adding sabnzbd to the /etc/rc.conf file, but I can't quite configure it so that the necessary files are in place to start it.
If you need any details of my setup, please let me know.
Thanks heaps,
Luke

birdie101 wrote:Where would I find a good place to describe how to install programs using PKGBUILDs? and what that process is actually doing?
Apart from the wiki article on ABS, always look at the pkgbuild when in doubt. This is also helpful when you want to know what compile arguments are passed to GCC. Custom postinstall commands are run through .install file (example what is displayed after installation), this is generally foo.install in the AUR for a pkg named foo. And most importantly, familiarize yourself with compiling process, and Arch specific routines like a daemon should be defined in /etc/rc.d/, instead of /etc/init.d/ in other linuxes.
Edit: A best exercise would be to create a pkgbuild yourself. Arch always recommends community contributions.
Last edited by shemz (2010-09-24 08:08:14)

Please help me to get the wireframe component scroll bar to actually scroll??

I can't seem to figure out how to get this working?? I have a page that is long and needs scrolling capabilities. Blargh.
Gina

Hi RemsX,
I'm glad you found some steps that worked for you, but you should be able to set up a scroll panel more easily without those strange extra steps. Try the following:
Draw a few rectangles (say, 5) arranged in a vertical stack.
Place a wireframe Vertical Scrollbar to the right of the rectangles.
Select everything and Convert to > Scroll Panel
Double-click to edit the Scroll Panel
Select all the boxes -- but not the Scroll Bar, and Convert to > Scrolling Content
You should now see a dotted-line bounding box surrounding the rectangles. Drag the bottom of the dotted-line box upwards, so that the bottom one or two rectangles are hidden (clipped).
File > Run, and verify that dragging the scroll bar causes the stack of boxes to scroll.
Does that work for you? You shouldn't need to convert anything to a generic component or graphic, or place the scrollbar inside the content... If you're having trouble with the above steps, please post back with details about which step didn't work out and we'll try to help more...
- Peter

Help:Unable to get the Current Month Data

Hello Folks,
Hello Folks i have this scenario where i need to modify this code so that it has to return data from the Current month First Day to the previous Day if its a daily report and previous month data if its a monthly report.
BEGIN
if v_lowdate is null or v_highdate is null then
select to_number(to_char(sysdate, 'DD')) into v_cur_day from dual;
if v_cur_day < 25 then
-- this is for the previous month run
Select Add_Months(trunc(sysdate, 'MONTH'), -1)
INTO V_LOWDATE
FROM DUAL;
SELECT Last_Day(ADD_Months(Sysdate, -1)) INTO V_Highdate From Dual;
else
-- this is for the current month run
Select trunc(sysdate, 'MONTH') INTO V_LOWDATE FROM DUAL;
SELECT Last_Day(Sysdate) INTO V_Highdate From Dual;
end if;
end if;
I have replaced the above code with the code below but its still returning the previous month Data. Any help would be appreciated.
v_lob := get_admin_value(p_admin_procedure_name => 'CLIENT_DATAFEED_CODE',p_err_msg => v_error_text);
if v_lowdate is null or v_highdate is null then
v_cur_day := TO_CHAR (SYSDATE, 'DD');
IF report_type = 'D' -- Daily report
AND v_cur_day > '01' -- (except when run on 1st of the month)
THEN -- will cover from
v_lowdate := TRUNC (SYSDATE, 'MONTH'); -- 1st of this month to
v_highdate := TRUNC (SYSDATE - 1); -- yesterday
ELSIF report_type = 'M' -- Monthly report
OR ( report_type = 'D' -- (or Daily report
AND v_cur_day = '01' -- if run on the 1st of the month)
) -- will cover from
THEN
v_lowdate := ADD_MONTHS ( TRUNC (SYSDATE, 'MONTH')
, -1
); -- 1st of last month
v_highdate := TRUNC (SYSDATE, 'MONTH') - 1; -- last day of last month
END IF;
END IF:

How are you testing this? It works for me, or at least generates the dates I think you want.
SQL> var fake VARCHAR2(25);
SQL> var report_type VARCHAR2(1);
SQL> exec :fake := '16-oct-2009'; :report_type := 'M';
PL/SQL procedure successfully completed.
SQL> DECLARE
2     v_cur_day VARCHAR2(2);
3     v_lowdate DATE;
4     v_highdate DATE;
5     fake_date DATE := TO_DATE(:fake, 'dd-mon-yyyy');
6 BEGIN
7     v_cur_day := TO_CHAR (fake_date, 'DD');
8     IF :report_type = 'D' AND v_cur_day > '01' THEN
9        v_lowdate := TRUNC (fake_date, 'MONTH'); -- 1st of this month to
10        v_highdate := TRUNC (fake_date - 1); -- yesterday
11     ELSIF :report_type = 'M' OR (:report_type = 'D' AND v_cur_day = '01') THEN
12        v_lowdate := ADD_MONTHS ( TRUNC (fake_date, 'MONTH'), -1); -- 1st of last month
13        v_highdate := TRUNC (fake_date, 'MONTH') - 1; -- last day of last month
14     END IF;
15     DBMS_OUTPUT.Put_Line('Low: '||TO_CHAR(v_lowdate, 'dd-mon-yyyy'));
16     DBMS_OUTPUT.Put_Line('High: '||TO_CHAR(v_highdate, 'dd-mon-yyyy'));
17 END;
18 /
Low: 01-sep-2009
High: 30-sep-2009
PL/SQL procedure successfully completed.
SQL> exec :report_type := 'D';
PL/SQL procedure successfully completed.
SQL> /
Low: 01-oct-2009
High: 15-oct-2009
PL/SQL procedure successfully completed.
SQL> exec :fake := '01-oct-2009';
PL/SQL procedure successfully completed.
SQL> /
Low: 01-sep-2009
High: 30-sep-2009
PL/SQL procedure successfully completed.John

Please help me to get the website design in exact fit

Hi,
I developed a website that is 1280x840 and a few user had smaller screens were having problem checking the site in noscale mode. Now i set it to exact fit, but all the external movie clips are getting distorted, so what i was wondering is, if you have any sample codes that will resize those movie clips keeping its scale proportions, or if you have any other suggestions on what to do?
Kind regards and thanks in advance for your replies......
Nirmalatha

Ehm. Before placing? At that point ID doesn't know anything at all about the PDF.
var myPDFFile = File.openDialog("Choose a PDF File");
myPDFFile.execute();
Then check the lower left bottom -- it should display the page size.
Why not first place the file and then check its size? You can always move it to the right position after placing.
Oh, by the way: "a PDF" doesn't have a "page size". Each single page in a PDF can have a page size of its own.

Please help! I get the message ALERT: Error verifying class MyCnavas

Hello, I'm Trying to work on a gaming project in j2me. For which first of all, I'm trying to create a menu using the low level API. I tried the following program to see if my idea works. I tried to add in the menu items by calling g.drawString inside a for loop in the paint method. Then I've used the drawRect to draw a highlighting rectangle around the first menu item. It compiles and preverifies successfully, after which it gives me the error while running:
ALERT: Error verifying class MyCnavas
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
class MyCanvas extends Canvas
     private static final int DOWN = -2;
     private static final int UP = -1;
     Graphics g;
     int itemposition = 0;
     public MyCanvas()
          super();
          repaint();
     public void paint(Graphics g)
          this.g = g;
          int pos=0;
          for ( int i =1; i<3;i++)
               pos = i*20;
               g.drawString("Option".concat(String.valueOf(i)), 20,pos, Graphics.TOP|Graphics.LEFT);
          g.drawRect(15,pos-5, getWidth()- 50, pos+5);
     public void keyPressed( int keycode)
          System.out.println(keycode);
          //if ( keycode == UP)
public class MyMIDlet extends MIDlet
     MyCanvas can;
     Display display;
     public MyMIDlet()
          can = new MyCanvas();
     public void startApp()
          display = Display.getDisplay(this);
          display.setCurrent(can);
     public void pauseApp()
     public void destroyApp( boolean unconditional)
}Any help on this issue will be greatly helpful
Regards
Rahul

No, I am using the default emulator provided by the sun midp 2.0 specification. I am executing the program on the command prompt. I am not using the wireless tollkit provided by sun.
I already tried removing those declarations of UP and DOWN, which are quite unnecessary I understand. and I tried removing the repaint call in the constructor. It still gives me the same problem.
I am not able to figure out what the problem could be. ANy help on this would be appreciated
Rahul

Cannot Go To Database Home Page

I installed...
Oracle Database 10g Release 2 (10.2.0.1) Express Edition for Microsoft Windows (Western European)
...and I choose >Start, >Programs, >Oracle Database 10g Express Edition, >Go To Database Home Page
...and IE6 opens and tries to load this URL
http://127.0.0.1:8080/apex
...and I get a "The page cannot be displayed" error.
If I try using the machine name...
http://kamoskimxp:8080/apex
...then the page loads; but, it is blank. (This leads me to think that if I knew the exact URL, fully-qualified, for the actual Database Home Page itself, including file name and extension, then I would be able to forcibly load the page. But, after many guesses, that URL is still unknown to me.)
Note -- This box is behind a corporate firewall.
Note -- This box has a built-in, fixed home page in IE that is the company's intranet home page, and this IE home page setting cannot be changed by the enduser.
So, my question is...
...How can one get the Oracle Database Home Page to load under such circumstances?
Please advise.
Thank you.
-- Mark Kamoski

it cant start..
like this..
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oraclexe\app\oracle\product\10.2.0\server\network\ad
min\listener.ora
Log messages written to C:\oraclexe\app\oracle\product\10.2.0\server\network\log
\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR
_XEipc)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=LENOVO-C72B2944)(P
ORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 1001: Unknown error
Listener failed to start. See the error message(s) above...
this is my tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = LENOVO-PKN)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
and this my listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = LENOVO-C72B2944)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)

Please help - Unable to get the cluster database home page

Similar Messages

Maybe you are looking for