Please help: Unable to stop intro from looping

I've hired a good Flash developer who has most of his
experience in Flash 8 - AS2. We developed an intro movie for our
site, but when the intro is complete and the first page loads, the
intro just restarts from the first frame (loops). We can't come up
with a solution - the stop(); function does not seem to work in AS3
as it did in AS2.
My developer first tried to work entirely in AS2, but CS3
will not permit us to add a Flash 9 player object when the project
is compatible with AS2 - must be AS3 only.
Any assistance in this issue would be greatly appreciated! It
might be something very basic we are overlooking -
Thanks in advance.

The main timeline loops, kglad. The entire site "resets" and
plays from the begining. Putting stop(); in the frames where we
want the timeline to "stop" doesn't actually stop anything.

Similar Messages

  • Please Help: Unable To Transfer Songs from Itunes To Ipod

    I've been plagued with problems every since Thursday when I was attempting to put new songs on my iPod. I got the dreaded sad face with the go to apple support site link. I've did the 5 R's but still no luck. I even reformatted it cause at one point in time I got a pop up telling me that the drive needed to be formatted. Well after doing this and updating it finally appeared to be operating correctly. I was able to load roughly three cd's on it before it went screwy again. I've ended up with the monochrome apple display and then the stupid disk mode do not disconnect one too. I've finally gotten it as of this morning to show up normal but now as soon as I connect my iPod to iTunes I get this pop up error
    http://img.photobucket.com/albums/v152/Mike5150/6a28448b.jpg
    Then if I attempt to load any songs it appears to try it but then it hangs up and I get this message.
    http://img.photobucket.com/albums/v152/Mike5150/21692d56.jpg
    Any ideals as to what is wrong with this stupid piece of censored;) I'm at my wits end and you have no ideal how bad I wanna stomp this little white box!!

    Well since your getting the "Sad ipod" face, you may have to sent it in for repair. That said, the "iTUnesDB is corrupt" message is covered here along with ways to have windows format the ipod (Link Below)
    Now if you do have to format the ipod with windows, when windows is done YOU HAVE TO RESTORE IT WITH THE IPOD UPDATER BEFORE LOADING IT WITH ITUNES!!!!
    http://discussions.apple.com/thread.jspa?threadID=361771
    If you put the ipod in "Disk Mode" like the instructions say, and you can't get it to show in windows, you will have to disable the "iPodservice.exe" in task manager, format with windows THEN RESTART THE PC so the ipodservice is running again and you can restore it with the ipod updater

  • How do I stop mail from looping the same emails into inbox?

    How do I stop mail from looping the same emails into the inbox over and over again? It does the same thing with deleted messages that keep showing up again and again in multiples even after deleting them. I have made sure my server settings in all email accounts are set to delete immediately once I delete them on my MacBook Pro/IPhone. This issue has severely compromised the efficiency of Mail on my MacBook. Thanks for any help you're able to give me.

    I have tried that but it does not fix the problem.
    The "card" group is not a previous recipient.
    Although not available for editing in Contacts, it is a valid group showing up in the "To" field of Messages, Mail, or any app using the AddressBook.
    Its associated file is automatically created in:
    ~/Library/ApplicationSupport/AddressBook/Sources/<hexaFolder>/MetaData/<hexa>ABG roup.abcdg
    This is why it also shows up in the Spotlight results...
    If I manually remove this file, it gets recreated...
    If I turn off the syncing through iCloud, the entry gets deleted. If I turn it up, it comes back!

  • Please help me to stop error message.

    hi, I am using iPhone4.
    Always sh error message showing 'Cannot Get mail The connection to the server failed' many times before opening the mail. but after that i can use the mail. please help me to stop the message.
    iOS 7.1.2(11D257)

    Check for suspicious extensions in Firefox/Tools > Add-ons > Extensions and remove them.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Try to delete the search.json file and possible search-metadata.json and search.sqlite files in the Firefox profile folder to reset the search engines to the default.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Firefox will rebuild the search.json file from the default search engines in the "browser\searchplugins" folder in the Firefox program folder and the searchplugins folder in the Firefox profile folder.
    *http://kb.mozillazine.org/Unable_to_search_or_add_new_engines

  • Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

    Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

    After the restore did the phone work properly for a while? Say, a day or so?
    If so it is possible you have an app that doesn't let go of memory properly. I reboot my iPhone ( hold sleep/wake and hole till you see the apple logo) every few days. This resets the memory. The iPhone OS has doesn't seem to mange memory very well yet. So a reboot will help with that. I have had my phone almost slow to a stop before I started rebooting. Always reboot after installing a new app. Also do you close all pages in Safari when you are done? This is a good practice. Safari will run in the background and use processor time and drain your battery quicker. Create a new blank page then close all others when you are done browsing for a while. I have also found that certain web site that have animated images like weather maps will turn the phone into molasses. As soon as i close that page it gets faster.
    If all of the above have no effect then as Tamara said it is time for a trip to the Genius bar.
    Good luck

  • Hi there. Can someone please help me with copying photos from my old iPad to my new one? Thanks.

    Hi there. Can someone please help me with copying photos from my old iPad to my new ipad2? Thanks.

    If you have a pc, when you plug your iPad in you should see the windows pop up window offering to backup the photos. Do that and it will save all your photos and videos to your computer where you can then sync them back to your new one.
    If the pop up doesn't come up, double click on my computer and navigate your way to the iPad. Double cick on it an d navigate to the DCIM folder. Drag your photos and videos to your pc, then sync them back onto your iPad.

  • The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

    The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

    Hello gokulaan, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Please help i bought an iphone from ebay and it is unlocked and refirbished by apple how do i know what sim card to buy for it? iPhone 3GS

    please help i bought an iphone from ebay and it is unlocked and refirbished by apple how do i know what sim card to buy for it? iPhone 3G

    Contact your chosen cellular provider to obtain a compatible SIM card.

  • HT3702 please help to solve the violation from itunes

    please help to solve the violation from itunes

    Sorry, but the minimal amount of information you have provided does not allow us to understand what problem you are having. You will need to post a more complete description of your issue before anyone can even guess at suggestions.
    Regards.

  • I have been backing up  since 2010 but my machine will only go as far back as feb 11 ... why is this? please help i need valueable info from 2010

    i have been backing upĀ  since 2010 but my machine will only go as far back as feb 11 ... why is this? please help i need valueable info from 2010

    Welcome to the discussion area!
    When the Time Capsule disk starts to become full, Time Machine will automatically delete the oldest backups first to make room for new backups.
    For more details, I think you will get a faster and more informed response if you post in the TIme Machine forum for questions like this. We primarily handle configuration set up and networking questons about the Time Capsule as a hardware device on this forum, but it's possible that someone may see your post and respond from here as well.
    Please click the link below and then click the "Refine this list" 'button to see the Time Machine area.
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard?categ oryID=263

  • Please,I want to stop users from visiting particular wensites while connected to the internet. How do I configure Firefox to automatically stop users from visiting such dangerous sites?

    Please,I want to stop users from visiting particular wensites while connected to the internet. How do I configure Firefox to automatically stop users from visiting such dangerous sites?

    Thanks, Ronda! I haven't been able to try your suggestion because I fried my router! So I need to get a new wireless router before proceeding.
    (I may start a new thread about getting a new router, but I will look for answers first to my questions and only start one if I cannot find answers.)
    After I get a new router, I will try what you suggested and report back here.

  • Please help me transfer purchased apps from my current ios6 to new ios7 program.

    Please help me transfer purchased apps from my current ios6 to new ios7 program.

    There is no need to transfer anything.
    Update the device via iTunes or Over the Air... no content on the device should be affected.
    If the device is used as designed and regularly backed up to iCloud or iTunes on the computer, should anything go wrong it can be restored.

  • Please help in unlocking my iPhone3GS from at&t

    please help in unlocking my iPhone3GS from at&t

    Read here:
    http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820&title=What%20are%20t he%20eligibility%20requirements%20for%20unlocking%20iPhone%3F#fbid=q2Tus0RX3ir
    See if you qualify & it so, request AT&T unlock your phone.

  • Please help: unable to set preferences for planning from workspace.

    Hi Experts,
    unable to set preferences for planning from workspace.(file--->preferences----->planning), when doing this task prompts " An Error occured" preferences works fine with other components IR, FR, WEB ANALYSIS.problem is only with the planning.
    1) i restarted the workspace and planning services but even then the same issue.
    Please help me out on this issue.
    Thanks.

    Hi,
    Do you get the same problem if you access planning directly ? http://<planningmachine>:8300/HyperionPlanning/
    Just trying to understand if it related directly to planning and maybe you will get a different error message.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Please Help:(,Unable to capture from camcorder using Audigy 2 ZS Video Edi

    Hi there! Well I have been trying to use the Sound Blaster Audigy 2 zs video editor to transfer Hi8 tapes from my camcorder (Samsung SLC860) to my laptop (Compaq presario, AMD Athlon 64 3200+, .25 GB RAM, xp). I have successfully done this before *sort of*. Before i was able to capture video from my camcorder without the sound. But now I cant even capture video! I get an error when using Ulead VideoStudio 8 SE reading: 5065:29:0. Please help, anything would be great! Thank you! Oh, i've tried reinstalling the drivers already, didnt work. P.S. I connect the camcorder to the Creative Audigy using S-Video. I have also tried A/V out from the camcorder to video-in on the Audigy. I have also downloaded VidCap and other driver updates from Creative but those didn't work either. I've tried VidCap other capture programs, none worked. Any help would be great. Thank you!
    Message Edited by DjShadowalker on <SPAN class=date_text>06-06-2006 <SPAN class=time_text>:09 AM
    Message Edited by DjShadowalker on 06-06-2006 :09 AM

    Hi there! Thanks for the reply, unfortunately, I've tried VidCap and it wont let me capture either. The Start button on Step 3 isn't acti've. Its not bold, and when i click on it nothing happens. But under device manager and Sound, Video and game controllers, there are alot of things. They are as followed: Audio Codecs, Legacy Audio Drivers, Legacy Video Capture Drivers, Media Control Devices, Sound Blaster Audigy 2 ZS Video Editor Audio Device, Sound Blaster Audigy 2 ZS Video Editor Video Device, SoundMAX Intergrated Digital Audio, Video Codecs. Do you think any of these could be interfering with one another? If so, which ones can be safely disabled? I've also tried downloading all the necessary updates for VidCap and I've even tried reinstalling the Audigy card many times. I am able to see the preview of the video on both programs VidCap and VideoStudio but I just can't capture. Once again, the error message on VideoStudio is: 5065:29:0. Thank you so much, hopefully I hear from ya soon and this can be fixed.

Maybe you are looking for

  • Character set conversion UTF-8 -- ISO-8859-1 generates question mark (?)

    I'm trying to convert an XML-file in UTF-8 format to another file with character set ISO-8859-1. My problem is that the ISO-8859-1 file generates a question mark (?) and puts it as a prefix in the file. ?<?xml version="1.0" encoding="UTF-8"?> <ns0:me

  • Iphone stuck with itunes and usb symbol, havent got disk help!!!

    i have my itunes uptodate but the iphone is stuck with the itunes and usb symbol on screen, i havent got the disk for the computer either :/

  • Problem with rotate function.

    I got a problem with the rotate function. When I rotate an (text) object (point text but same behavior with area text) on the GUI of Illustrator, the resize bounds around (see screenshot) is rotated as well so that you can resize it as used to. If I

  • Are there a dynamic way for evaluting variables in as3?

    Hi..! eval() is a usefull method or function in javascript.. Because we may define our variables via dynamic way..! There are following code is for understanding that how can define dynamic defining variables in javascript.. And Are there a dynamic w

  • Satellite 2450-114 : Non readable DVD-RW with SDR-6012 DVD drive

    Hello, I have bought Verbatim DVD-RW (media code : MCC 01RW4X) but it cannot be read by the Toshiba SD-R6012 DVD drive of my Satellite laptop 2450-114. However I have the latest official firmware which is the number 1334. Is there a way to fix it? Th