Please Help Urgent Advise Needed on KT3 Ultra ARU
Every time I start my system the start up sequence gets as far as loading the desktop and some application and then for no reason the system reboots itself, this occurs usually as the same place suring the start up routine. Can anyoen please advise as to what this problem is caused by or how to detect the root cause. have tried to start in Safe Mode and change setting but this does not seem to have any affect.
Thank you in anticipation of any advice or support
GK X(
Hi There
Every time I start my system the start up sequence gets as far as loading the desktop and some application and then for no reason the system reboots itself, this occurs usually as the same place suring the start up routine. Can anyoen please advise as to what this problem is caused by or how to detect the root cause. have tried to start in Safe Mode and change setting but this does not seem to have any affect.
The system has been running trouble free for the past 14 months.
It was only a couple of weeks ago that this problem started. I have checked the CPU temp and it is running at a constant 45 degrees C which I understand is a reasonable/average temp.
If the problem is due to bad/wrong/currup drivers how can I detect which ones? Are there any diagnostic tools availble that will help me detect the root cause here and fix it?
Im running WinXP (home). If the problem is corrupt OS system how can I detect and repair this? Are there any tools available for this? What is the best way to repair or reinstall the OS. What is the best approach here?
What should the PSU voltage reading be? How do I check them, via PC Alert system monitor.
Thank you in anticipation of your support and guidance
Kind Regards
GK
Similar Messages
-
Kt3 Ultra-ARU MBFastTrack Problem
I am running a MSI KT3 Ultra- ARU I am having problems with MBFastTrack It doesn't let me do the auto setup. It does detect my HD. I have Raid Enabled. I am trying to run 2 HD's and I would like to make sure I have it all set up right. I don't think i do tho. what can i do to make sure it's running right and why can't i do the auto set up in MBFastTrack. I'm a newbe to computers so any ideas will be helpful.
My system:
Msi KT3 Ultra-ARU
AMD Athlon XP 2100+
Two 512 , One 256 Samsung DDR Ram
ATI Radeon 8500LE 128 DDR
Sound Blaster Live
550 W PS
Hp CD writerI have a Seagate 60g Master on IDE 3, and a Western digital 60g slaved on IDE 4. Hope that helps.
I'm trying to set things up on Raid 0 aswell -
MSI KT3 Ultra ARU & GeForce 3 TI200
A little prob:
When I run my GF3 in AGP mode, all my games hang after playing 1 min. Then when I change the "Via Tech CPU to AGP-controller" to "PCI standard PCI to PCI brigde" thereby running my GF3 in PCI-mode everything runs fine. Then I went into "dxdiag" and saw that "Acceleration of AGP-struktur" was not availble. So I was thinking, am I looseing enything by running the GF3 in PCI-mode and is it the MSI or the GF3 that is causeing this problem.
I have tried all the VIA 4in1 drivers and they did not help.
My specs:
MSI KT3 Ultra ARU
Athlon XP 1900+
Palite Daytona Geforce 3 TI200
Windows XP proi have the kt3 ultra with a geforce 3 ti200 and it runs flawless.. i use the det 30.30 drivers. one thing i noticed with geforce 3 cards is if i have my agp apperature set to anything but 128 games will freeze and get all kinds off lock ups. if i were you i would look around this forum for the bios setup guide for the kt3 ultra! and set your bios according to that guide
if you cant find it here goto http://www.amdmb.com and go to the msi forum there and the set up guide is there
hopefully that helps!!!! -
I forgot my password for Encrypt my Backup how can I reset that please help I really need it Urgently?
If you do not know the passcode then you cannot use the backup
Sorry -
I have lost my iphone 4 just an hour ago... i need to delete my personal photos from it. PLease help urgently.. Thanks
If you had find my iphone enabled follow the steps in the article below:
http://support.apple.com/kb/ph2701 -
I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT
If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699 -
Hi everyone, I�m having problems with Java Mail, I have just installed it along with the java activation framework, they are located in the following directories:
JavaMail: C:\jdk1.3.1\lib\javamail-1_2[1]
Java activation framework: C:\jdk1.3.1\lib\jaf1_0_1[1]
I have the classpath set as: C:\jdk1.3.1\lib\mail.jar;C:\jdk1.3.1\lib\activation.jar
When I try to compile the sample code provided with these packages, msgsend.java using Jbuilder 2 I get the following errors:
Error (36): cannot access directory javax\mail.
Error (37): cannot access directory javax\mail\internet.
Error (209): class message not found in class msgsend.
Error (210): class MessagingException not found in class msgsend
Error (134): class Session not found in class msgsend
Error (134): variable Session not found in class msgsend
Error (139): class Message not found in class msgsend
Error (139): class MimeMessage not found in class msgsend
Error (141): class InternetAddress not found in class msgsend
Error (145): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
Error (146): Variable InternetAddress not found in class msgsend
Error (148): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
Error (149): Variable InternetAddress not found in class msgsend
Error (151): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
Error (152): Variable InternetAddress not found in class msgsend
Error (162): Variable Transport not found in class msgsend
Error (170): class Store not found in class msgsend
Error (172): class URLName not found in class msgsend
Error (172): class URLName not found in class msgsend
Error (189): class Folder not found in class msgsend
Error (195): Variable Folder not found in class msgsend
Error (197): class Message not found in class msgsend
Error (197): class Message not found in class msgsend
If I try to use another Java package to compile it I get even more errors (52), I cannot compile it by using the Javac command line compiler, it just says �Bad command or file name�.
Can anyone tell me Why this is happening and how I might be able to fix it please, I need to start learning Java Mail quickly but at the moment I can�t even begin to do this until I can understand how to get this sample code to work.
Thanks Everyone
NoelFirst of all... don't post with topics like "Please Help - Urgent". The topic is supposed to reflect what the question is about.
Secondly... think for a second. If mail.jar is in C:\jdk1.3.1\lib\javamail-1_2[1]... why are you with your classpath saying that mail.jar is in C:\jdk1.3.1\lib ?
You classpath is supposed to point directly at you jar-files.
/Michael -
how to download garageband old version? i mean version 1.0 to install it on iphone 4s with ios 6.0.1??? please help urgently, how to download garageband old version? i mean version 1.0 to install it on iphone 4s with ios 6.0.1??? please help urgently
I did this a few weeks ago to be sure it was going to work for a young person I was giving my ipod to. Then I reset the information for her and now it will not load. Very sad. She is so talented and she really needs this. Anyone know?
-
Please Help Urgently to refresh the report on the change in data
We want to refresh report at runtime for the Drill Down report if any user changes the Data. We changes the data from the form which is called from the report and we want to this effect on the report on the prompt.
Is there any method to close the report while it is in the queue of Background Engine? Can we refresh the report ? Please help urgently.
Thanks in Advance.Pritesh,
Reports goes out to the database and fetches the data (not a snapshot) and returns the information, formats it and displays it. The only way to refresh, is to rerun the report.
If your are running from the server, you need to make sure you are not fetching from cache (you determine this from destype and set the life of the cache in the servername.ora file).
I am unaware of any way to programatically close the report once displayed. The user must take action to close the report (unless you call the operating system to kill the display). When you rerun the report from Oracle Forms, you will get fresh data.
Regards,
The Oracle Reports Team jls -
Starting tomcat problem, please help urgent
I installed jwsdp on windowsXP . The log file gives this following error when i try to start tomcat:
java.util.zip.ZipException: Access is denied
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:127)
at java.util.jar.JarFile.<init>(JarFile.java:138)
at java.util.jar.JarFile.<init>(JarFile.java:80)
at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java:1081)
at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java:200)
at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java:202)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:141)
at java.lang.reflect.Method.invoke(Native Method)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Bootstrap: Class loader creation threw exception
java.lang.IllegalArgumentException: addRepositoryInternal: java.util.zip.ZipException: Access is denied
at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java:1109)
at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java:200)
at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java:202)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:141)
at java.lang.reflect.Method.invoke(Native Method)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
PLEASE HELP ,URGENTLY NEEDED TO SHOW SOME WORK ON THIS.
THANKS
jimHi,
I have a similar problem, i try to deploy a JAR file built on AIX 5.2 platform (jvm 14.1) into Tomcat 5.5.7 running on Windows platform when i try start Tomcat it's fail with the fellowing message
SEVERE: Error deploying web application directory usi
java.lang.IllegalArgumentException
at java.util.zip.ZipInputStream.getUTF8String(ZipInputStream.java:299)
at java.util.zip.ZipInputStream.readLOC(ZipInputStream.java:238)
at java.util.zip.ZipInputStream.getNextEntry(ZipInputStream.java:73)
at java.util.jar.JarInputStream.<init>(JarInputStream.java:58)
at java.util.jar.JarInputStream.<init>(JarInputStream.java:43)
at org.apache.catalina.util.ExtensionValidator.getManifest(ExtensionValidator.java:368)
at org.apache.catalina.util.ExtensionValidator.validateApplication(ExtensionValidator.java:187)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3942)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:909)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:872)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1106)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1019)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1011)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:440)
at org.apache.catalina.core.StandardService.start(StandardService.java:450)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409) -
PASSWORD FOR FLODERS PLEAse HELP URGENT
HI ALL
please tell me the method of implementing password
provision for some folders/files in the system.
it should ask for password authentification before
opening when i click on the folder.
please help urgent
thanks
belurHi Swaroopba,
It can be very well done thru Form based Authentication.
For eg let me explain with respect to Tomcat.
Go to
$TOMCAT_HOME/webapps/examples/WEB-INF directory.
Please add the following code in it.
<security-constraint>
<web-resource-collection>
<web-resource-name>Protected Area </web-resource-name>
<!-- Define the context URL's to be protected -->
<url-pattern>/jsp/security/protected</url-pattern>
</web-resource-collection>
</security-constraint>
Please add the following code in it. And you have to specify the roles for it.
I hope this will be helpful for you.
Or if you want it in an application, please let me know.
Thanks
Bakrudeen -
can somebody please tell me how to fix this. when i try to install appleworks this pops up
so please help me i need to get this on my macAppleWorks is a very old application and requires Rosetta to run under recent systems.
Lion does not include Rosetta.
If you browse this forum you will find many posts on this issue. -
I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need advice.
What type network is yu router set up for? The 4G iPod can only connect and see 2.4 GHZ networl like B, G and the 2,4 GHz N. There is also a 5 GHz N but the iPod will not even seethat network.
See:
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Recommended settings for Wi-Fi routers and access points -
my itunes will not open! is giving me error7(windows error 126) and is stilling me MSVCR80.dll is missing and i tried downloading itunes like 6 times and is saying the same thing. Please help! i need to sync my kids ipads and ipods
thank you!Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086
-
please help URGENT : Chinese handwriting doesn't seem to work on Lion OSX. the handwriting trackpad appears but anything i write in Chinese doesn't appear in word, chrome,..... HELP PLEASE
And in system prefs/language and text/input languages, simplified chinese and traditional chinese are ticked as usual with handwriting options on !!!!Please search the forum for "chinese" to find the many other earlier posts about your issue, like
https://discussions.apple.com/message/15746805#15746805
Maybe you are looking for
-
My iTunes keeps crashing every single time I open the software on any of my PCs and laptops. Once the Itunes match features starts it's ony a matter of a minute or two before the software crashes. I have tons of new songs that I want to sync to my
-
Need to read data from a text file
I need to read data from a text file and create my own hash table out of it. I'm not allowed to use the built in Java class, so how would I go implementing my own reading method and hash table class?
-
Error in SAP Netwear Installation. sxi_cache Cache is obselete
Hi all, I am trying to install SAP Netwear. I have installed it on MS SQL Server,using the guide SAP Installation SR1 on MS SQL. I have been facing problems from the time i ran the template installer.The step 9 for creation of Creating RFC Destinatio
-
Ask about UTL_FILE in Stored Procedure
Hi I was trying to do an insert in a table which then trigger a stored procedure to write the inserted data to a text file. However, I have some issues here in the Stored Procedure. Thanks for trying to help... [Insert -> Table -> Trigger -> Stored P
-
Hello I'm quite new to Premiere and I am trying to help out a friend with extending a video he has. We are using CS4. Basically he has a video of a lightbulb on a black background, the video starts as a totally black screen where the bulb is not visa