PLEASE HELP. URGENT- Creating a slide show presentation with music

Good day. I would like to create a slide show presentation with music attached to it. i tried it once with a few pistures and it worked. now, i have around 3 hundred pictures and would like to create a slide show but unfortunately the same music keeps on playing over and over again. once the 1st music is done and there are still pictures to be shown, can i use another music title? how do i do this? please help....

Place the individual music files into a new iTunes playlist. Choose it (not the individual files) by hitting the OK button.

Similar Messages

  • I am using Iphoto 6 to create a slide show but my music stops when it supposed to loop?

    I am using Iphoto 6 to create a slide show but my music stops when it supposed to loop?

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Making a slide-show disk with music self-playable

    I have burned a slideshow disk with music through Keynote. In "Inspector", I made sure that zI selected "self-playable" before recording and saving it. However, when I put the disk in my iMac, the icon appears on my desktop, I click on the icon, a window pops up with the file on it, and I click on the file. Then Keynote opens up with the slideshow showing in "Navigator" and I have to press or select play for the slideshow to play.
    What must I do to have the slideshow play as soon as the disk is loaded or at least when I click on the icon of the disk on my desktop?
    Thanks for your help.
    Vernon

    Place the individual music files into a new iTunes playlist. Choose it (not the individual files) by hitting the OK button.

  • Flash Slide Show Presentation Question

    I have created a slide show presentation in Flash format. On
    some of my slides, I have animations that run when the slide first
    loads. However, as I do not want the animation to continue looping
    preventing the viewer from reading the slide, I used actionscript
    to place a stop action at the end of the slide animation.
    The problem is that if the user uses the previous button in
    the slide show to return to the slide the animation does not run.
    It will only run again if the entire slide show is restarted. Is
    there a simple way to fix this?
    Thanks

    The steps are fairly simple. I create a listener ,a loader
    and an empty movie clip to load the images into. I write a
    listener_mc.onLoadInit function then I use the loader_mc.loadClip
    to load the images into the empty movieclip. When the loading is
    complete the onLoadInit function gets called and you can resize and
    center your images.

  • I created a slide show on work computer. Placed photos and movies in Media Browser. Want to use another computer (laptop) to give presentation. Do I need to copy media browser to laptop or are pictures and movies embedded in slide show and can go anywhere

    I created a slide show on my work computer and placed many photos and movies in my work computer's Media Browser. Want to use another computer (laptop) to give the presentation and therefore change location of slide show. Do I need to copy the media browser to the laptop or once the pictures and movies are embedded in the original slide show, can I take it anywhere and not worry about the media browser?
    I also want to optimize a movie for Keynote, so it's not too large a file. Please help.

    Graphic, sound and video files are copied into the Keynote file, but make sure Keynote > Preferences - include sound and movies check box is ticked.
    If you have added additional fonts they will need be changed to reflect what is on the destination machine.
    If the other machine has a different Keynote version, ensure the same transitions and effects are available.

  • Trying to create a slide show

    I'm trying to create a slide show. when i put my pics. in they are distored, not clear. what must i do.

    trusme
    Lots of details absent.
    Besides what version of Premiere Elements you are using and the computer operating system on which it is running, where are you creating this slideshow
    a. Elements Organizer/Create/Slideshow/Slideshow Editor
    or
    b. Solely Premiere Elements workspace
    If Premiere Elements workspace, then we need details of the project preset that you or the program is setting. Is this an all photos or a photos and video presentation. If photos and videos, please give
    a. photos, how many and pixel dimensions of each
    b. video, format and duration
    What is this slideshow end product going to be
    a. DVD-VIDEO standard or widescreen on DVD disc
    b. AVCHD format on DVD disc
    c. Blu-ray disc format on Blu-ray disc
    Many of these questions have already been asked, but I include them here to keep my focus on what needs to be learned about the issue.
    If you need help in answering, please do not hesitate to ask.
    Thanks.
    ATR

  • I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down

    Elements 10 was deactivated on desktop and installed on new laptop.  Have on
    y used it for photo editing until yesterday. Created a slide show with music but every time I try to burn to cd or move it to hard drive after about 15 sec, it says windows has encountered a problem with this program and must shut down.
    I Also can't sign in to adobe with the program. It simply spins and I had to force close the program.
    help!?

    I am using photoshop Elements 10 under the create tab...slide show.
    Used it on my desktop several times. Deactivated it and installed on new lap top about 5 months ago.  Had not used it other than for photo editing until today.
    I can also not login in thru the program. It simply spins and I finally had to force close the program
    Toni V. Sloan
    Sent from my iPad
    On Jun 27, 2014, at 7:03 PM, Chris Cox <[email protected]>
    I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down
    created by Chris Cox in Photoshop General Discussion - View the full discussion
    Photoshop doesn't do slideshows… What software are you using?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6504356#6504356
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Creating a Slide show in Quicktime Pro

    Hi all,
    I have over 400 hundred images that I need to run into Quicktime for a slide show presentation. I tried IDVD and it just hangs up when I try to burn the disc.
    Now I'm trying Quicktime Pro. I created a folder with the 400+ images named in sequence 1,2,3....
    Choose File-Open Image Sequence and selected the first image.
    Then Saved file as a Quicktime movie. It brought in the one selected picture. Now, how do I get the rest of the images into the movie without having to click and drag everyone of them? Is there a any kind of automation to bring the rest in. Maybe I missed something. I'm working on a Mac G4 Laptop, Tiger and just purchased Quicktime Pro thinking it would do the job. IMovie is not an option because the images come in too pixelated.
    Thanks for any help on a quick way of doing this.
    Cheryl
    Powerbook G4   Mac OS X (10.2.x)  

    Problem solved. It seems that there is, indeed, a rather strict file naming convention. My original filenames began 1,2,3, etc...but with more information behind that which was seperated by an underscore. I took all of that out and renamed the files using only single digit filenames in sequence and that seemed to work and I also took out the extention--I don't know if that matters or not; but it works now. I'm on my way to the IDVD forum because this might be the reason I couldn't burn an IDVD as well. You wouldnt happen to know if IDVD has similar querks? BTW I'm using a Mac G4 Laptop OS 10.4.6
    I'd say my Quicktime problem is solved at any rate.
    Thanks so much for your help!

  • Create a slide show in Dreamweaver?

    How do you create a slide show in Dreamweaver?  If you have a group of pictures do you pull the pictures into Flash and then use a wizard? Please any help to get me started in the right direction would help.
    Thanks,
    Pat

    Hi
    To get you started, try one of these extensions for dreamweaver - http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=slideshow&search_exchange=3&se arch_category=-1&search_license=&search_rating=&search_platform=0&search_pubdate=&num=25&s tartnum=1&event=search&sticky=true&sort=0&rnav_dummy_tmpfield=&Submit=.
    My personal preference if you have flash pro or lightroom is slideshow pro - http://slideshowpro.net/.
    PZ

  • Navigating Flash Slide Show Presentation??

    Hello,
    I have an .SWF file which I created using the Flash Slide
    Presentation document type. It consists of a number of screens. I
    need to load this .SWF file into another Flash movie and control it
    with actionscript, but I do not know the code. Could someone please
    give me a hint at the code needed for simply getting this movie to
    jump from one slide/screen to another? Or point me to a good
    tutorial?
    Thanks in advance.

    was afraid of that... thanks you :-)
    - greg
    "Wolf van Ween" <[email protected]> wrote in
    message
    news:e6kg2k$qb5$[email protected]..
    > Yes, would have been wiser. Slide show presentation
    makes things a lot
    > more complicated. Can be done, but requires a twisted
    brain.

  • How do I create a slide show in iPhoto from an iCloud photo stream

    ow do I create a slide show in iPhoto from an iCloud photo stream?

    Do you mean from a Shared Stream or My Photo Stream?
    In iPhoto on your iPhone, iPad you create slideshow projects by selecting photos and then sharing them as a new slideshow. http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnkbc26e276
    You can publish your slideshow in iCloud:  http://support.apple.com/kb/PH2333
    In iPhoto on your Mac you can make an instant slideshow by selecting the photos in the photo stream and pressing the slideshow button, see: http://support.apple.com/kb/PH2333

  • How can I create a slide show and insert it into an email

    I created a slide show of some pictures I want to share with my sales associate but can't seem to figure out how to Email it.  any help would be appreciated!  Thank you!

    You will need to export it as a  QuickTime movie and share that.
    That said, movies are big files and many recipients will be less than delighted to get large attachments that can cause them problems in their mailboxes. Better to upload the movie somewhere and then email them a link. Dropbox is an excellent way to do this.]
    Regards
    TD

  • Newbie Here - How to Create a Slide Show in CS5?

    I am using Windows 7 and I am familiar with PSElements 8 where creating a slide show is easy.  I just want to create a slide show in CS5 (in Bridge??  View>Slideshow Options?) using vacation photos from several folders, and I want to order them manually.
    First, I can't figure out how to display more than one folder in the Content panel in Bridge.  Second, I can't figure out how to create and intersperse "blank" slides with text.   Third (and I haven't even gotten this far yet), how do I save the slide show and burn a VCD?  This was all so easy and intuitive in PSE8, I can't believe it seems nearly impossible in CS5! 
    As an alternative, should I simply re-save the photos as JPEGs (they are PSDs now), export them to a Desktop folder, open them in PSE8 and create the slide show there instead?   Thanks for any help and suggestions!

    I am using Windows 7 and I am
    familiar with PSElements 8 where creating a slide show is easy.  I just
    want to create a slide show in CS5 (in Bridge??  View>Slideshow
    Options?) using vacation photos from several folders, and I want to
    order them manually.
    First, I can't figure out how to
    display more than one folder in the Content panel in Bridge.  Second, I
    can't figure out how to create and intersperse "blank" slides with
    text.   Third (and I haven't even gotten this far yet), how do I save
    the slide show and burn a VCD?  This was all so easy and intuitive in
    PSE8, I can't believe it seems nearly impossible in CS5! 
    As
    an alternative, should I simply re-save the photos as JPEGs (they are
    PSDs now), export them to a Desktop folder, open them in PSE8 and create
    the slide show there instead?   Thanks for any help and suggestions!
    1) Bridge has a new feature (can't think of the term at the moment) but it works like instancing or virtual copies. Select all of the photo's that you want and place them in the "collection" (Ah I knew I would think of it) Move to another folder and move them into the same collection and so on. These are virtual copies in that they don't really exist, but are a link to the original images. You then can use the collection for the slide show.
    2) Just create a page same size as your photo's in photoshop with what ever color background and put your text on it.
    3A)The slide show can be exported as a pdf or swf. Windows can then copy the file to a cd. If you choose swf, you may need to alter the html file (I assume it generates one, if not it isn't har to create one) The html file would help the web browser determine the correct size to display at. If you have flash, it can be used to create a html file as well.
    3B)If you would like the slide show to be displayed on a tv screen, then your cd/dvd will need to use a format that your dvd player can play, mp2 is the standard, but some can display jpg's, some are blue ray, etc. For exporting into the correct video format, then one of the following can be used. After Effects, Premeire pro, Encore, Photoshop (If you have quicktime installed and you are using one of the formats that quicktime supports like mp4)
    If you have quicktime installed, paying the 20 bucks may be worth it as it will allow you to take your jpg images and generate an animation file as avi or mov. But can save as mp4 as well.
    4) In Bridge you can select all of the images and run image processor on them. This plug in is part of photoshop there fore it will be in the menu's under photoshop. It will let you specify the files size, format and any actions, etc. It will then place them all into a folder that you specify.

  • Please help me creating a new listener with different port#.

    I have two instances in a server. both have different homes. I want to create a seperate listener for the second one i created.
    But that is not happening.
    here i tried to give name from LISTENER TO LISTENER1 & Port# from 1521 to 1524.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = /apps2/oracle)
    (PROGRAM = extproc)
    LISTENER1 =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST = aixth53)(PORT = 1524))
    When I check lsnrctl status with LISTENER1 , it still shows the other instance home with port#: 1521
    Please help me creating a new listener with different port#.
    Thanks,

    marist89 wrote:
    sb92075 wrote:
    marist89 wrote:
    sybrand_b wrote:
    The listener is a broker only and doesn't play any role in normal communications.
    It just forks a process or a thread, and that's it.And the listener is a single point of failure. Listener goes down, you can't connect to the db. That's why you need two listeners.If listener one goes down, then listener two goes down for exact same reason since it is a single executable file.I'm not playing tit-for-tat with you. Fact is, there are situations where people who are not you might want to use more than one listener.Some folks might want to jab a sharp pencil into their eye, too.
    Just because you can do something, it does not necessarily mean it should be done.

  • Need help rotating photo in slide show...buttons aren't highlighted

    I'm trying to create a slide show in Photoshop Elements 5.0. For some reason some of the pictures are showing up in my slide show with the wrong orientation. When I click on the picture, the buttons on the right side that allow you to rotate and do more editing won't highlight. Any tips would be helpful. Thanks!

    Some questions to hopefully help us understand what is happening -
    What is the file format of the files where photo shows in the wrong orientation and the buttons to rotate and edit are not available? - For example - are they jpg or psd or tif ? Are these portrait photos that are shown laying on their side?
    Did you add these photos to the slide show from the Organizer or from a Windows folder? Some people have reported that not all functions are available to them when the photo is added to the slide show from a Windows folder.

Maybe you are looking for