Please help video play issue

How can I play a flv file from second 2 to seond 20 ?

From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
           ▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
          Delete All Site Data and Settings
then click Delete Data. Close the preference pane. Test.

Similar Messages

PLEASE HELP--gotoandPlay plays through frames I dont want it to.

Hello--I am an architecture student and I am having problems
with my Flash website. I have uploaded my half-done website on
http://ilocker.bsu.edu/users/msgoyak/WORLD_SHARED/
My animations end on frame 311, where I have five buttons
linking to different frames (The Resume button links to 312 and the
About Me button links to 313 using
on (release) {gotoAndPlay(frame number);
I also have "back" buttons on 312 and 313 which link back to
311. All three frames have the stop command applied.
My problem: Whenever I publish and try to click on Resume or
About Me, it will only play to 312 due to the stop command, thereby
not allowing me to get to the About Me frame (313). I have tried
taking away the stop command but then when I click on the About Me
button the timeline plays through 312 to get to 313 and you can
actually see it flash through on-screen. I just want ithese buttons
to jump to their respective frames and stop, without seeing
anything in-between or stopping where it shouldn't. Is there a
specific actions script that needs to be applied or would it be
easier to create new flash documents for each link?
Hopefully someone can help m after viewing the website
itself.
I have version 7 MX 2004.
Thank you if you can provide any feedback!!!!!! Hopefully
this frustration thing can be corrected.

A: PLEASE HELP--gotoandPlay plays through frames I dont want it to.

Use the gotoAndStop(frame number): instead of play.
The playhead will stop on the disignated frame, and you won't
need a stop
action on it.
"[email protected]" <[email protected]> wrote
in message
news:f0b17u$5ot$[email protected]..
> Hello--I am an architecture student and I am having
problems with my Flash
> website. I have uploaded my half-done website on
>
http://ilocker.bsu.edu/users/msgoyak/WORLD_SHARED/
>
> My animations end on frame 311, where I have five
buttons linking to
> different
> frames (The Resume button links to 312 and the About Me
button links to
> 313
> using
> on (release) {gotoAndPlay(frame number);
>
> }
> I also have "back" buttons on 312 and 313 which link
back to 311. All
> three
> frames have the stop command applied.
> My problem: Whenever I publish and try to click on
Resume or About Me, it
> will
> only play to 312 due to the stop command, thereby not
allowing me to get
> to the
> About Me frame (313). I have tried taking away the stop
command but then
> when I
> click on the About Me button the timeline plays through
312 to get to 313
> and
> you can actually see it flash through on-screen. I just
want ithese
> buttons to
> jump to their respective frames and stop, without seeing
anything
> in-between or
> stopping where it shouldn't. Is there a specific actions
script that
> needs to
> be applied or would it be easier to create new flash
documents for each
> link?
>
> Hopefully someone can help m after viewing the website
itself.
> I have version 7 MX 2004.
> Thank you if you can provide any feedback!!!!!!
Hopefully this frustration
> thing can be corrected.
>
>

Youtube no sound while video plays. Sound in other software is good. I tried to deleted all advance setting in flash play in system preference and download latest adobe flash player and restart computer. no help! please help solve this issue.

No sound in youtube while video plays.

Please help, video won't play in Premiere but audio will.

I have a video that was shot with a still camera that allows for short videos. The video is 30fps, 640x480 44100Khz audio.
When I play it in Windows Media Player it plays fine. If I import it in Adobe After Effect it play fine, but when I import it into Premiere, the audio plays fine, but the video plays like there are only 2-3 frames and that's it. the clip is the correct length, visually. Can anyone help? All other clips imported fromvideo cameras work fine.
Thanks,
Roberto Cerini

Your clip probably uses the MJPEG codec.
If you can't find one that works for you then the following links will help you:
FAQ: How do I import xyz format files?
FAQ:How do I convert my files?
Cheers
Eddie

New to Quicktime-Please Help-Not Playing Streaming Video

_PLEASE HELP, I AM NEW TO THIS._ I can't see that Quicktime is playing streaming videos. I have the latest version of Quicktime including Perian and every other plug-in I can find. In System Preferences I have tried Automatic and Custom (Port 80) for the Transport Protocol. I have everything checked in the MIME settings. In Safari Preferences I have all the plug-ins enabled. The streaming videos play in Safari, but if I try to open ANY URL in Quicktime, it says URL INVALID. THANK YOU.

I dont believe you can put a youtube link in quicktime itself. An easy way to download them however is to add &fmt=18 for HQ videos or &fmt=22 for HD videos to the end of the youtube url ex http://www.youtube.com/watch?v=GRSbC6HAgNE&fmt=18 Then load that page and then in safari click window then activity. Find the one with the largest size (should be the only one in MB) and double click on it. THen it will download to where you set safari to download your files.

Please help - CD import issue in itunes

I would really appreciate some help.
I have a Sony Vaio laptop and a HP I Pod.
Have used Itunes with no problems for 9 months and have imported/ripped hundreds of CDs into my library with no issues.
Recently, however, iTunes stopped allowing me to import/rip CDs into my library. When I try, it imports the first 4-5 seconds of the first song and then locks my entire computer up. I have to power down the laptop.
I attempted to run the CD diagnostic through iTunes, that also locked up the laptop.
I have uninstalled and re-installed iTunes several times.
I had my IT guy look at the laptop and do some preliminary research. He indicated that this is not uncommon and that others have reported having this problem since upgrading to iTunes 6.0.
Based on that, I un-installed 6.0 and went back to the version that came with the iPod. I think it is 4.9. Problem still exists.
Please help. I still have a lot of music I would like to load into iTunes.
Thanks!

This is what my CD Diagnostics results are:
Microsoft Windows XP Home Edition Service Pack 1 (Build 2600)
HP Pavilion 061 PE529A-ABA A523X
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Pfc (2.5.0.204), PxHelp20 (2.0.0.0), AFS2K (3.1.19.0), MxlW2k (1.1.0.116),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: VIA/S3G UniChrome Graphics\VIA/S3G UniChrome Graphics Adapter
IDE\DiskSAMSUNGSP1203N________________________TL100-24, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskGenericUSB_CF_Reader__1.01, Bus Type USB
USBSTOR\DiskGenericUSB_MS_Reader__1.03, Bus Type USB
USBSTOR\DiskGenericUSB_SD_Reader__1.00, Bus Type USB
USBSTOR\DiskGenericUSB_SM_Reader__1.02, Bus Type USB
IDE\CdRomNEC_DVD+RW_ND-2100AD___________________1.26___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: _NEC DVD+RW ND-2100AD, Rev 1.26
Audio CD in drive.
Found 12 songs on CD, playing time 54:58 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 06:08:02
Track 3, start time 10:47:27
Track 4, start time 15:01:15
Track 5, start time 19:07:55
Track 6, start time 22:46:30
Track 7, start time 27:29:05
Track 8, start time 31:34:72
Track 9, start time 35:35:07
Track 10, start time 39:56:50
Track 11, start time 43:22:07
Track 12, start time 49:42:17
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 20 24 32.
The drive CDRW speeds are: 4 8 16 20.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.

Please help with export issue with HD.

I have a current project set at 1920x1080 HDTV 1080i (16x9) and my customer has decided to change his mind and not go HD 16x9 which I had shot in specifically for this reason. What settings could I use to export for 720x480 DVD 4:3? Please help.
Thanks
Joe

+Do I copy and past the Sequence file from the HD into a DV NTSC new project? Yes or no?+
Yes. Once you are done export it to Compressor to encode your video into an m2v and the audio into an ac3 dolby stereo. Then import those as assets in DVDstudio4, create your menu, if you need one and burn your DVD.
+Can you give me a more step by step?+
As I asked before...are you not familiar with using Compressor and/or DVD Studio Pro?
If not (and if the links I sent to you are not helpful enough) then follow these two approaches:
(Hope Shane Ross doesn't mind if I report one of his stock answers about a basic way to make a DVD followed by my basic "step by step" use of Compressor in order to give the OP a quick and easy support).
Shane Ross wrote:
+The absolute simplest way to make a DVD using FCP and DVDSP is as follows:+
+1. Export a QT movie, either a reference file or self contained using current settings.+
+2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.+
+3. Select the left blue one and hit delete.+
+4. Now, select the green one, right click on it amd select the top option "first play".+
+5. Now drag your QT from the broswer and drop it on top of the green monitor.+
+6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."+
+7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.+
+THATS ALL!!!+
+NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.+
Gogiangigo wrote:
Creating your MPEG2 and AC3 files with Compressor:
Compressor will create an Mpeg2 of your edited video and an ac3 (dolby stereo) for the audio (You can't create ac3audio with DVDstudio).
(Use google for any farther information about any word or definition that remains slightly unclear to you).
After that is done burning your DVD with DVDStudio will be quicker and easier.
Step 1
Once you are done with the edit you can:
either export it straight from the timeline to Compressor (File>Export>Using Compressor)
or create a QT movie (check self-contained in the export window) and import into Compressor after you open it.
If you export it straight from the timeline Compressor will open automatically,
if you wish to use the self-contained QT movie you can still export it from an open FCP project or open Compressor independently. If the the latter is your case once you open Compressor click on Add File in the toolbar (top left corner ).
In both cases your video will appear in an untitled project right below the toolbar. You can see the movie (or FCP) icon and the title of your project.
Now, the simplest way to proceed is as follow:
you see the text next to the icon of your movie (in the blue rectangle) saying "drag here settings and destinations"? Now go to the settings window below, you can see the settings and destinations tabs. Go to Settings>Apple 4 groups>DVD 10 groups>DVD best quality 90 minutes two settings. This is the most common setting to use.
In a nutshell drag the DVD best quality 90 minutes folder over the "drag settings and destinations here" text. Choose your destination. If you click each setting the inspector window activates. Now before we go ahead I suggest you to read the manual and understand the importance of the inspector window and its functions. In particular read about Avarege bit rate, maximum bit rate and in general Variable frame rate (VBR) and constant frame rate. With regard to audio read about ac3.
This time we leave default settings and proceed by clicking the Submit button.
In the preview window, right below the player commands you can see a little arrow and a date, click on the arrow and you can see that Compressor is encoding your video.
Step 2
When the encoding process is over open DVDstudio.
See the first button of the toolbar , top left? Click on Import Asset, find your encoded audio and video files and open them.
Now since your movie has been already compressed video(Mpeg2) and audio (ac3) they will show in the assets tab below the graphical tab followed by two green lights.
From now follow Shane Ross's steps from point 3 if you don't want a menu.
If you need a menu there's a simple video tutorial that came with FCP studio 2 discs . Take a look at that.
Best,
G.

PLEASE HELP - VIDEO QUESTION

hey
a while ago my mate downloaded music videos to a cd for me and i put them on itunes and then converted them to fit the ipod as they wouldnt go on the ipod, but when i converted them the sound disappeared. anyone know what i can do? i watch the music videos but theres no sound, and on my ipod theres also no sound when i watch them.
PLEASE HELP
Dell Windows XP

hiya!
it sounds like you might be running into the following problem:
iPod plays video but not audio of some exported files
were the original files muxed?
love, b

Please Help - Video Playback Problems

I have followed all the instructions provided by iTunes support in an attempt to fix problems with video playback. They did not help. I downloaded 4 video files that would have smooth audio sound but skip and freeze continually throughout the entire video.
This problem 1st occurred right after I downloaded the latest version of iTunes and then a purchased video. One point of interest is that all of my old video files from earlier versions of iTunes still work fine as they always did.
Could anyone please help me to resolve this issue?

I have had the same problem. I even bought a new 256mn video card and it did nothing. I have done everything i-tunes website suggest and nothing has helped.

Please help with Contribute issue- Adobe or anyone!

My issues are many- I don't know where to start. First, as a long-time Adobe customer, I can not believe how support has declined- I really miss my "support package" from the early 90's when I spoke with a person who really knew how to address my problems and/or questions. I am so tired of being outsourced to someone who has no idea how to address my problem- only to send me to "Document #8932023912 03" off of the Adobe website. I want to talk to someone who KNOWS and APPRECIATES this product, and who understands its internal behavior (like what I get when I call MAC SUPPORT). I will pay for it! I have invested thousands of dollars on Adobe software and am now at an unacceptable standstill.
My small business relies on the Adobe Creative Suite 4 and the Contribute program. Up until now, I have never had a complaint, especially after moving to Mac a few years ago. Troubles started after two things (still not sure what the culprit was) - installing Snow Leopard and installing a Wacom Bamboo tablet (on the same day- my bad). Well, Illustrator, Photoshop work just fine as well as my other non-Adobe programs. But I can't even open InDesign (will post this on the proper post) or Contribute. So Apple had me deduce that I needed to create a new User and try things there. I eventually migrated to this new user but still, I cannot use Contribute.
I have set permissions with the program and contents of the folder- in addition to my Contribute keys to no avail. I can't even open it. Nor can I open it in my Root user which at least lets me run In Design. I am at a total loss and I need to update a website for my client. PLEASE someone, I would so greatly appreciate any advice or instruction as to how to run Contribute on my new user. Or in my Root user. I just need to get it to open! Reinstall did nothing PLEASE HELP.
A special note to anyone from Adobe: I want to talk to someone via a support package-- NOT outsourced. Does this fee-based option exist? It doesn't seem to from the main support number. If someone can help direct me, I would appreciate the proper instruction to do so. I need to get my InDesign running again and I have already invested multiple hours, days with Adobe support with NO solution at all. This is unacceptable in my mind, especially for the moneys invested.
Thank you in advance... Aimee M.

I totally share your views on Adobe period. I loved Macromedia., they also answered all my questions, then Adobe had to buy them out! I called them today (sales Dept., that's where they answer rather quickly., of course), they explained the following: You can pay for a live person, but the prices differ in that they come in packages. In other words, you can pay a flat rate per hour for one-on-one OR pay for one-on-one tech support 5 times per month, and the amount of times per month vary from that point on., and so does the price! I'm baffled! They are HORRIBLE!! . Like yourself, am on a standstill ever since I've been stuck with not being able to publish my site with current edits and it gives me a message whereas my own company name is "currently editing the page," so it keeps kicking out. I've tried everything, including but not limited to the following: going to the library and checking out books to troubleshoot; going on Adobe pages for support as well the Help features on the software program., etc...I'm exhausted! ADOBE you guys need to reassess your Customer Care Support and your outsourcing business as well!!! YOU WILL LOOSE YOUR CUSTOMERS RATHER QUICKLY!!

Please help with this issue "To Run a SSIS Package outside of Server Data Tools You must install Drived Column of Integration sercvies of higher" From C# app

i have searched all over the google and here on MSDN(I have read all the threads related to my problem ) , i am new to SISS and doing my clg project ,
I have this package which loads data from dim tables to a fact table , my Package runs without any problem in BIDS (2012)
I have installed SQl Server integration services on SQL and service is also running in services.msc,
the problem comes when i execute my package using my C# application i am using MSDN Method to execute a SSIS package programmatically given here.
"http://msdn.microsoft.com/en-us/library/ms136090.aspx"
For loading my FactTable i have used a Derived columns and some lookups ,
Now if i don't use derived columns and looks ups and just use source and destination component then my package runs fine from my C# application but if i use derived columns or looks ups etc it gives the following error
"Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/SSIS.Pipeline: To Run a SSIS package outside of SQL Server Data Tools you must Install Derived Column of Integration services of higher"
I am searching and trying to resolve this issue from previous 2 days but without any luck please help or guide me what is solution to this problem ,,i will be very thankful
I have also found that integration services that are running on my system have version 10.0
but the BIDS have version Version 11.0.3402.0
IS this causing problem ? if yes then what i have to do ?

Hi BlaxButt,
The package is developed in SSDT installed by SQL Server 2012, so it is a SSIS 2012 package. However, the Integration Services you have installed is SQL Server 2008 R2 version. To run the package outside SSDT, you need SSIS 2012 installed. The reason why
the package runs fine with only Source and Destination components is that such a simple package can be executed by the DTExec utility installed by SQL Server 2012 Data base Engine or Client Tools (SQL Server Import and Export Wizard). To run a package that
uses other tasks/components outside SSDT/BIDS, the SSIS runtime is also required except the DTExec utility. To obtain the SSIS 2012 runtime, we have to install SSIS 2012 on the server where the package runs.
Reference:
http://stackoverflow.com/questions/19989099/getting-error-running-ssis-package-on-non-ssis-server
Regards,
Mike Yin
TechNet Community Support

URGENT!!! Java Gurus Please Help with adf issue!

PLEASE SEE MY LATEST POST BELOW TIMO'S RESPONSE. THE REQUIREMENT HAS CHANGED. THAT IS THE ISSUE I AM LOOKING A SOLUTION FOR.
Hello All,
We have a requirement where our adf/jsf app needs to pick an EXCEL file from the server where the application is deployed. The sequence is :
User comes to the page
Clicks on "Open EXCEL" button
EXCEL file located in the c:/ of the server opens up.
How can this be done? I do not see any coding needed because the EXCEL file is being opened as is (and after user views it he closes the file) and the data is not being transferred to the jspx page.
*We are totally flexible in how this is implemented - ie, using button, link , html etc etc. What ever works!!!!*
Thanks,
Edited by: user12054715 on Aug 17, 2010 8:54 PM
Edited by: user12054715 on Aug 18, 2010 4:11 PM
Edited by: user12054715 on Aug 18, 2010 4:13 PM

Hello Timo,
I am using 10.1.3g so your response is not going to help me.
However, I have another question that I have already posted on the Forum. Please help me...
Requirement:
*1. Java application should be able to write "Hello World" in the excel file, when the user opens it.*
I CAN DO THIS WITH THE FOLLOWING CODE:
HSSFWorkbook wb = new HSSFWorkbook();
HSSFSheet sheet = wb.createSheet("newSheet");
HSSFRow row = sheet.createRow(1);
row.createCell(1).setCellValue("HelloWorld!!!!!!!!!");
*2. A "Write To Excel" button on jsf page opens a dialog asking user to Save or Open the excel file. (user can save the file anywhere on his machine)*
I CAN DO THIS WITH THE FOLLOWING CODE:
In jsf:
<af:commandButton text="Download" action="#{myBackingBean.writeToExcel}" useWindow="true"/>
In backing bean:
public static void writeToExcel() throws IOException
String filename = "workbook.xls";
// //Setup the output
String contentType = "application/vnd.ms-excel";
FacesContext fc = FacesContext.getCurrentInstance();
HttpServletResponse response = (HttpServletResponse)fc.getExternalContext().getResponse();
response.setHeader("Content-disposition", "attachment; filename=" + filename);
response.setContentType(contentType);
PrintWriter out = response.getWriter();
BOTTLENECK: When the user opens the excel how do I show "HelloWorld!!!!!!!!!" ?

PLEASE HELP - M500 Projector Issue

Hi
I just inherited a M500 projector from my cousin who had to move away and I've been trying to get it to accept video signal from either composite video cable (yellow tip), S-Video or HDMI via different converter pieces for the DVI-I port. I haven't been successful. I've looked everywhere for a converter piece that would allow the projector to accept this type of video signal but no luck. I finally went to an electronics shop where the guy told me that there were specific cables that come with the projector that allow for this type of conversion and that I need these specifically. Since my cousin is gone I won't be getting them from him. Can anyone PLEASE help me by directing me to where I might find these cables or if I can purchase them directly from Lenovo??????? I can't wait to get this projector up and running.
Thanks in advance,
Kris

hey DrZoggs,
give our support team a call to check if cables are available :
http://www.lenovo.com/contact/ca/en/
also do visit http://shop.lenovo.com
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Please help, user browser issue.

Hi guys, i have re developed phpbb site mercedes dubai in Dreamweaver and cant able to splash top image to resize as per the user screen resolution. Please help.
Thanks.

Hi Carnity,
This forum is for questions and feedback about the Adobe BrowserLab cross-browser testing service. Unfortunately the BrowserLab team doesn't have the bandwidth to help with individual questions regarding HTML/CSS coding issues.
It's possible one of the other forums users may be able to help you, but you may have better luck getting an answer if you post to the HTML5 forum here: http://forums.adobe.com/community/dreamweaver/html5
Best of luck,
Mark

Please help with WSRPi Issue

Hi Gurus,
I am using the Application Workspace Portlet extension for JDEV 1013.
This morning I deployed successfully some JSR-168 Portlets in my WSRP OC4J container and registered the providers successfully with Portal 10.1.4
Now I am following exactly same steps but I am encountering the following error:
An error occurred during the call to the WSRP Provider: Java stack trace from root exception:
java.rmi.ServerException: Internal Server Error (java.lang.RuntimeException: oracle.webdb.wsrp.server.ContainerException: Unable to load resource bundle "project1.resource.Portlet1Bundle")
at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:384)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:245)
at oracle.webdb.wsrp.WSRP_v1_ServiceDescription_PortType_Stub.getServiceDescription(WSRP_v1_ServiceDescription_PortType_Stub.java:63)
at oracle.webdb.wsrp.client.design.v1.OraWSRP_v1_ServiceDescription_PortType.getServiceDescription(Unknown Source)
. (WWC-43273)
Any Ideas for this issue??
Please Help.
Thanks
JO

Hi JO,
I remember this problem - it used to occur in one of my Portlets. It usually happens when the Portlet is not compiled using the same JDK compiler as the OC4J.
Does your JDev 10.13 ( the default JDK is JDK 1.5 ) & the OC4J contaier for Portal 10.1.4 have the same JDK version ?
Regards,
Sandeep

Please help video play issue

Similar Messages

Maybe you are looking for