PLEASE HELP - VIDEO QUESTION
hey
a while ago my mate downloaded music videos to a cd for me and i put them on itunes and then converted them to fit the ipod as they wouldnt go on the ipod, but when i converted them the sound disappeared. anyone know what i can do? i watch the music videos but theres no sound, and on my ipod theres also no sound when i watch them.
PLEASE HELP
Dell Windows XP
hiya!
it sounds like you might be running into the following problem:
iPod plays video but not audio of some exported files
were the original files muxed?
love, b
Similar Messages
-
Please Help - Video Playback Problems
I have followed all the instructions provided by iTunes support in an attempt to fix problems with video playback. They did not help. I downloaded 4 video files that would have smooth audio sound but skip and freeze continually throughout the entire video.
This problem 1st occurred right after I downloaded the latest version of iTunes and then a purchased video. One point of interest is that all of my old video files from earlier versions of iTunes still work fine as they always did.
Could anyone please help me to resolve this issue?I have had the same problem. I even bought a new 256mn video card and it did nothing. I have done everything i-tunes website suggest and nothing has helped.
-
PlEASE HELP EASY QUESTION: unload event is not firing at all.
Hi, onUnload event is not firing in Safari browser. I tried with different ways to capture that event but i failed to capture that event. So please help me on this, give suggestions to capture that event. Or any other event is firing when window is closing. Actually, i need to execute when window is closing. But in Safari the window is closing without firing of any events.
Safari doesn't execute the unLoad action when closing windows, period!
It only executes it when loading another page.
I might be wrong but I think Safari doesn't allow you to close a window with Javascript at all. All close events are blocked.
Maybe a SWF file can do it somehow. But I'm not sure... -
'm on a mac running leopard. The following TRULY baffles me.
So im a sound designer and i have an external sound card i
use for my work. When i watch flash videos with my built in sound
card (like youtube videos) everything is fine....
... but when i use my external soundcard the video content
stops and starts; it jitters all over the place. The audio however
is fine!
Now is this a hardware issue? i have all latest drivers and
firmware... or is it a setting in flash player i'm missing?
Major help needed, please aid me.
Thank you.Try installing the following in Firefox:
Those will effectively kill a lot of stuff that tries to run with videos. They used to spike my CPU on a Win 7 e-machine (plugin-container.exe) until I blocked everything. -
can you upload dvds to your ipod? if so, how?
to convert a video to the ipod you need 3rd party software.since your using windows lok at the links below.
this software is not supported by apple so with any support or questions you have go to their support forums for help not here. All the links are below and this is a good solution for windows users.
http://www.videora.com/en-us/Converter/iPod/
http://www.videora.com/en-us/Converter/guides.html
http://www.pspvideo9.com/forums/index.php?c=8
GFF -
Please help , A question that i got no answer for
Okie here is ma problem i wanna know if its possible or no way
we know that the Select * from table will retrieve all column , and if i wanna retrieve a specific columns i will have to mention it after the select keyword
but here is the question
i got table that contain loads of column and i wanna a query that will retrieve all column but one for example
i have table name , job , sal , hiredate , phone , id .....etc
i wanna to type select * from table to retrieve all those column without retrievin phone column
so is theere iis a away to drop the visability of column with select * !
i wanna some think like in a logic
select * from table except column phone << so how to do this and please put in your consideration that columns are so much and i dont wanna type them allIn SQL*Plus, command of hiding is COLUMN column_name NOPRINT.
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14357/ch12013.htm#i2697128
Is this your help?
SQL> desc scott.emp
Name Null? Type
EMPNO NOT NULL NUMBER(4)
ENAME VARCHAR2(10)
JOB VARCHAR2(9)
MGR NUMBER(4)
HIREDATE DATE
SAL NUMBER(7,2)
COMM NUMBER(7,2)
DEPTNO NUMBER(2)
SQL> column hiredate noprint
SQL> column comm noprint
SQL> column sal noprint
SQL> select * from scott.emp where rownum <=5;
EMPNO ENAME JOB MGR DEPTNO
7788 SCOTT ANALYST 7566 20
7369 SMITH CLERK 7902 20
7499 ALLEN SALESMAN 7698 30
7521 WARD SALESMAN 7698 30
7566 JONES MANAGER 7839 20 -
PLEASE HELP- flashing question mark in folder
Hi everyone,
last night I was just on my macbook as usual and suddenly it froze, so I turned it off. When i went to turn it back on, all that appeared was a flashing question mark in a folder.
I have tried all the suggestions on this page http://docs.info.apple.com/article.html?artnum=58042 , but none of them worked because it didn't even recognise/find the harddrive in the disk utility section. I don't have apple care ($419 is a lot of money for a student!) but I only bought the macbook about 6 months ago, so it is still within warranty. What should I do now?
Any help is much much appreciated!
MelissaMelissa,
I just had the same exact problem last night too. I called the apple technical service number and nothing they did helped because the hard drive wasn't found. I even got a fire wire cable and tried to hook my MacBook up to another Mac and tried the target disk mode hoping I could pull off data that I needed, but the other mac couldn't find the disk either. I'm kind of worried about losing some of my data. If you could let me know if you find any solution that would be awesome! I plan on going to the apple store this weekend to get it looked at.
-Michelle -
Please help, simple question about Smart Playlists and Live Updating
PLEASE for some reason I've never gotten an answer on this.
I have a Smart Playlist called "Recently Played" with Live Updating. No matter how I set the parameters, the most recently played *song will ALWAYS appear on the bottom of the list when using my iPhone on the go.* I bolded that because I want you to be aware I'm not talking about on iTunes - I'm aware you can change how the list is viewed on iTunes.
When using your iPod/iPhone on the fly and Live Updating is enabled, is there any way to make the most recently played song appear at the very top???
Thanks so muchHaven't seen that problem before but try the following: in iTunes, right-click the playlist name and enable the option "Copy to Play Order." Then sync.
The normal use of "Copy to Play Order" when you have the playlist displayed in iTunes in some sort order, but you want it to display in the iPod in shuffled order (as it will actually play). Different problem than you are observing, but the same thing "might" help.... Let us know. -
PLEASE HELP video on new itunes 6.0 ! ! !
I Have been trying to drag and drop most of the videos in my "my videos" folder to itunes in preparation for the 5th gen. ipod. Most of them work, but some here and there will say "error -2048 this file is not a movie file" when I try to open it with quicktime, which of course, if you can open it w/ quicktime itunes will accept it.
ANYONE ELSE HAVING THIS KIND OF PROBLEM?
IF SO, DOES ANYONE KNOW OF A WAY TO REFORMAT A VIDEO FILE TO QUICKTIME FORMAT?They are most likely the wrong size, and wong format for iTunes/iPod.
Some video conversion software will help. Im not a Windows user, but im sure one will reply soon with a few tips on software.
Quicktime Pro should do the job.
*nathan -
Please help, video won't play in Premiere but audio will.
I have a video that was shot with a still camera that allows for short videos. The video is 30fps, 640x480 44100Khz audio.
When I play it in Windows Media Player it plays fine. If I import it in Adobe After Effect it play fine, but when I import it into Premiere, the audio plays fine, but the video plays like there are only 2-3 frames and that's it. the clip is the correct length, visually. Can anyone help? All other clips imported fromvideo cameras work fine.
Thanks,
Roberto CeriniYour clip probably uses the MJPEG codec.
If you can't find one that works for you then the following links will help you:
FAQ: How do I import xyz format files?
FAQ:How do I convert my files?
Cheers
Eddie -
Please help, few questions on JDI
Hi,
I am quite new to JDI and have the following questions which might be silly to you..but these helps me in better understanding of JDI.
1. Can a track has Multiple SC's?
2. say if i have a clustered environoment, since we are able to define only one runtime system for production, how are we going to transport to the remaining systems in cluster?
3. Should a developer import the DC every morning he comes to work?
4. When does a developer really uses DTR, I mean ofcourse it is used internally by development configuration to maintain the code, but since he will be dealing with development configurations.. it is not really necessary for him to access DTR directly until and unless he wants the prev versions of code. Am I Right?
5. when a developer 1 creates a DC X with an activity and uses "CHECK IN" on the context menu of the activity, will the developer 2 be able to access the DC X? or should he wait until the developer1 releases the activity.
6. Is it really necessary to maintain DC's locally in NWDS or is it ok to maintain them in Development configurations?
I hope that you can help me with your suggestions.
Thank you
ShivaHi Sidharth,
First let me thank you for the reply.
Following are my comments
1. OK
2. OK
3. I mean, Since the developer doesnt have any code in the local desktop, every morning when he comes to work, he should login and get the dev configs.
I think the answer for this is "YES". am i right?
4. I mean, when would it be necessary for me as a developer to use DTR perspective at all? because I am dealing with the Dev configs and any changes and checkins etc.. is done automatically.. I need not go to , DTR perspective to do this. isnt it? if "yes" then when wud a DTR perspective be useful for me.
5. Got it
6. But local DC's will be automatically created whenever you import a Dev config and create a new DC in that Dev configuration. Am I right? i.e. although I am disconnected from Central Infrastructure, I will be having DC's locally. isnt it?
Thank you -
PLEASE help: video on new iPod Classic 160gb
Hi all,
I would be really grateful if someone could help me. I was lucky enough to receive a shiny black 160gb iPod Classic for Xmas to replace my old 3rd Gen one.
However I'm having a bit of trouble with videos. I have downloaded some video podcasts via iTunes store that have synced to my pod and play fine. However I have just downloaded some TV shows from the internet - they play in iTunes and are listed in my iPod under"My Devices" but I just can't find them on the pod.
Any ideas????Hiya and thanks for your respose!!
I downloaded them from a torrent site but they did say they were specifically formatted for iPod use - the file format is MPEG4.
However, I've also tried downloading a video podcast from directly from iTunes (again in MPEG4 format) that hasn't synced to my pod either.
It seems the only video I've managed to sync is a podcast I downloaded about a year ago and two music videos I had from importing CD's.
Any further help would be greatly appreciated.
Thanks! -
Please help! --Question about lauching application by JavaWebStart
Hi,
I am a new user of the Java Web Start technique. When I tried to launch my application by it, I got the error of
javaw.exe -- Application error
"the instruction" at "0x5006bf974" referenced memory at "0x000000e7f". The memory could not be "read"".
Could anyone tell me what is the cause of this problem and how to fix it? Many thanks!
LingI'm having the same problem. Specs are:
Win2K SP2
IBM Pentium 4 1500 MHZ 512MB RAM
Java Web Start 1.01
JRE 1.2.2 and 1.3.1_02 and 1.4.0_01 (setting default to any of these results in the same problem).
Any help is appreciated.
Lon -
Please Help -Videos won't play
Just purchased a 30 gig 5G black Ipod. Compressed a movie in Quicktime Pro to Ipod settings. Placed movie in my Itunes program. The movies plays fine in Itunes. But when I copy it to the ipod nothing happens. I have been dragging the movie from Itunes into my Ipod. Getting very frustrated.
Ok, gotcha. Anything from these two articles help (there are links within these links)?
http://docs.info.apple.com/article.html?artnum=302892
http://docs.info.apple.com/article.html?artnum=301461 -
Please Help - WebServices Questions
Hi,
I have developed one webservice for my client through eclips Rational application Developer. and i am using websphere appserver.
I have little bit confuse from starting .
The problem is which is the exact way to develop the webservice. ?
Is there any different types of webservices available ?
Is there any passiblity to develop and deploy through java web service into websphere ?
Which is the Best Way to develop the webservices ?
Please refer me any Text Book for Web Services for Beginners
Thanks
Merlin RoshinaRead Web Services Essentials (OReilly) by Ethan Cerami.
U can learn a lot web services in java.net...
Maybe you are looking for
-
How to pop-up a text box for a grid item on a user defined table?
Hello, I have a user defined table with a grid & one of the columns is for comments. What I'm trying to do is to pop up a text box when double clicking in the column field. This would be the same as the Item Details column in the Sales Order ittems g
-
OIM 9.1 Generic Connector
Hi, How can I delete a generic connector? I have created a generic connetcor for SPML web service....but due to some wrong input in a text field I am getting OIMAPI error. To prevent my log with this error I want to delete that connector or do I chan
-
Rotate document in Adobe Acrobat Pro
Hi All How do I custom rotate a document in Adobe Acrobat Pro? I see that there is the option to rotate by 90 or 180 degrees but how do I rotate by just 1 or 10 degrees? Thank you for your help!
-
TS3899 Mail is not working, please help?
I did all the steps listed above but my mail still isn't working! And I am not receiving any mail! Please help!
-
How to get latest instance using BO Enerprise SDK?
Post Author: sureshpolishetty CA Forum: .NET How to get the lastest instance of a report stored in crystal enterprise server (XIR2) using BO Enterprise sdk and .NET?. Can anybody help me with the query(using CI_INFOOBJECTS table)? Thanks