Please help :( When I try to export MOV file to a Windows Media...

...it only seems to export the first 10-15 seconds of the video.
Quicktime pro offers the option to export to WMV so why is this happening? Does my computer dislike me
Someone please tell me how I make it work.

jeremyschultz wrote:
So QT7 Pro exports to WMV
No, it doesn't. QuickTime as shipped by Apple neither plays nor exports WMV (nor WMA). You can see a list of the formats Apple provides here:
http://www.apple.com/quicktime/pro/specs.html
For WMV support you need third-party software (either a plugin for QuickTime as with the Flip4Mac codec, or a standalone product as with VisualHub), and for those products you may have to pay a licensing fee of some sort, said fee being completely up the developer of the product.
Message was edited by: Dave Sawyer

Similar Messages

  • Please help :( When I try to export to a Windows Media....

    I use flip4mac to convert my final cut projects into WMV but when I do that the files are huge and are much too big to upload to my website. What I've been doing is exporting the files as an MOV and then using Quicktime's "export for web" function to turn them into MPEG 4 (which are much smaller files) and then converting that file into WMV which turns out to be a more manageable size without losing a much picture and sound quality. Obviously this is an extremely convoluted way to do things and is very time consuming. I know there must be a simple way to use the Quicktime Conversion option straight out of Final Cut into a internet friendly sized WMV file but I can't figure out the settings
    I know this is probably a simpleton question but I have no formal Final Cut training so I'm self taught and I probably do everything backasswards. If one of you could help me I would be soooo grateful.
    Sincerely,
    Christine

    If the WMV files are too big when you export directly to that format, try using different settings. Even the cheapest flip4mac plugin includes several presets.
    -DH

  • I am still uing iMovie09. When I try to export movie some of share parts which are fine during editing, become very shaking. What should I do?

    I am still uing iMovie09. When I try to export movie some of share parts which are fine during editing, become very shaking. What should I do?

    Thank you so much...
    1. I don't have that fat format I checked as I saw this on another answer...BUT...you are right the project was very bloated and I made a new project with the sequence and moved a bunch of projects off to an outside drive and things are flying again...this effect "twirl" was on three clips and this seemed to be creating a problem along with it being a bloated project. Don't know why this effect renders easily then the next second doesn't it's on three clips on the entire project and one or another might not render all of a sudden.
    2. I understand what you said about the timeline export...I decided to export the sequence without the matte it was nested in and that sequence did have the chapter markers on the timeline and they again didn't export??? I'll look tomorrow at this it makes no sense if what you're saying is how to do it...the final cut pro book said they should have showed up if I export from the browser and that didn't work either.
    3. I then matted that output and rendered it to output but I am worried this will degrade and compress the sequence more than I want by outputting the same sequence with current settings twice???...the couple of outputs I could make nested looked very good as this was one render...however, I tried doing a quicktime "current settings" with the dvd studio pro info still trying to export chapter markers and maybe it's my imagination but the output didn't look as sharp as just an output with just chapter markers???
    r. I did look at the final cut pro book and it says that mpeg 2 movies will not read chapter markers anyway if you create one in compressor...if this is true it makes no difference if the quicktime output isn't having chapter markers show up. I assume when I go to author though I can put an mpeg 2 movie into dvd studio pro and create chapter markers at that point!! It seems weird it says it can do it with an mpeg 1 but not an mpeg 2 when everyone is using that for dvds.

  • When I try to export the file in word, I get the error "The Save as command has not been able to develop this document. Unable to create file"

    When I try to export the file in word, I get the error "The Save as command has not been able to develop this document. Unable to create file".
    Win7 Pro, 64bit
    Acrobat XI Pro, tryal

    Create a one word pdf file. Try converting to word. If that fails, try a complete uninstall, run the cleaner tool, then re-install.
    Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

  • When I try to import mov files into iMovie'08 (7.1.4) the files are greyed out. Any suggestions?

    When I try to import mov files into iMovie '08 (7.1.4) the files are greyed out. Any suggestions?

    Hi Appleman - thanks for your guidance.
    OK RealTime Inspector: Dimensions of my clips - as I don't know which bit this is I will list everything under Inspector, including Format:
    00117
    00117
    33.30
    Format:MPEG-4 Video, 1280 x 720 millions
    AAC, 2channels, 44100Hz
    FPS29.97
    Data Size2.57GB
    Data Rate 10.20 Mbits/s
    Current size 1280 x 720 pixels (Actual)
    And re the types of tracks you mention that iMovie '08 can't import, I don't much about film clips so haven't yet made sense of this, tho I do see that the clips are organised into chapters, so presumably this is 'chapter tracks'?
    Thanks - I'll await your further instructions :-)

  • Illustrator crashes when I try to export ai file into tif file

    Hi There,
    My Illustrator via Creative Cloud is completely up to date but today it kept on crashing when I tried to export ai files into tif files.  Please help.
    Thanks!
    Jen

    Hiya. Yeah, Also using Illustrator...   Version = AI 2014 CC it's doing the same thing - also crashing when i try to do any export.
    1) tried another version of the file - still crashes.
    2) Tried a New file, with some images and a Jpg and it works
    3) seems to be file format or something in the file. Any ideas on what i can check?
    4) software is up to date with latest version
    Thank you,
    L
    PS - i don't even get to select dpi or filetype to export - it just crashes as soon as you select export...  Pleeease send any suggestions! 

  • When I try to export a file, my doc. is nowhere to be found.

    I've done it so many times before, but since yesterday it just won't work. When I try to export my work from pages to word document, no matter where I choose to save the file, it doesn't seem to appear. I also tryed saving it on my desktop but it's not there either.
    Is there any secret cave in my comp for lost files?

    Kallie Louise,
    If you can rule out version change and similar, based on the word suddenly, you may consider the options below.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • When I try to download games eg. dreamland hd light it says the followingl: your request cannot be completed. Please help., When I try to download games eg. dreamland hd light it says the following: your request cannot be completed. Please help.

    When I try to download games eg. Dreamland HD light it says the following: your request cannot be completed. Please help.

    Honestly, these are WAGs but they're all that I can think of.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • Please help when i try to restore and update my iphone it says iphone update server is currectly unavailable or temporaly unavailable, and its been saying that for the past 5 days.

    i get a software update unavailable when updating and trying to restore my iphone please help its been 5 days already

    That's because your phone was jailbroken/hacked to unlock it. It is now a brick. Buy a new phone.

  • Please Help - When I try to add ASM Disk to ASM Diskgroup it crashes Server

    We are using a Pillar SAN and have LUNS Created and are using the following multipath device: (I'm a DBA more then anything else... but I am rather familiar with linux .... SAN Hardware not so much)
    Device Size Mount Point
    /dev/dpda1 11G /u01
    The Above device is working fine... Below are the ASM Disks being Created
    Device Size Oracle ASM Disk Name
    /dev/dpdb1 198G ORCL1
    /dev/dpdc1 21G SIRE1
    /dev/dpdd1 21G CART1
    /dev/dpde1 21G SRTS1
    /dev/dpdf1 21G CRTT1
    I try to create to the first ASM Disk
    /etc/init.d/oracleasm createdisk ORCL1 /dev/dpdb1
    Marking disk "ORCL1" as an ASM disk: [FAILED]
    So I check the oracleasm log:
    #cat /var/log/oracleasm
    Device "/dev/dpdb1" is not a partition
    I did some research and found that this is a common problem with multipath devices and to work around it you have to use asmtool
    # /usr/sbin/asmtool -C -l /dev/oracleasm -n ORCL1 -s /dev/dpdb1 -a force=yes
    asmtool: Device "/dev/dpdb1" is not a partition
    asmtool: Continuing anyway
    now I scan and list the disks
    # /etc/init.d/oracleasm scandisks
    Scanning the system for Oracle ASMLib disks: [  OK  ]
    # /etc/init.d/oracleasm listdisks
    ORCL1
    Here is whats going on in /var/log/messages when I run the oracleasm scandisks command
    # date
    Fri Aug 14 13:51:58 MST 2009
    # /etc/init.d/oracleasm scandisks
    Scanning the system for Oracle ASMLib disks: [  OK  ]
    cat /var/log/messages | grep "Aug 14 13:5"
    Aug 14 13:52:06 seer kernel: dpdb: dpdb1
    Aug 14 13:52:06 seer kernel: dpdc: dpdc1
    Aug 14 13:52:06 seer kernel: dpdd: dpdd1
    Aug 14 13:52:06 seer kernel: dpde: dpde1
    Aug 14 13:52:06 seer kernel: dpdf: dpdf1
    Aug 14 13:52:06 seer kernel: dpdg: dpdg1
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
    Aug 14 13:52:06 seer kernel: printk: 30 messages suppressed.
    Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
    Aug 14 13:52:06 seer kernel: sda : READ CAPACITY failed.
    Aug 14 13:52:06 seer kernel: sda : status=1, message=00, host=0, driver=08
    Aug 14 13:52:06 seer kernel: sd: Current: sense key: Illegal Request
    Aug 14 13:52:06 seer kernel: Add. Sense: Logical unit not supported
    Aug 14 13:52:06 seer kernel:
    Aug 14 13:52:06 seer kernel: sda: test WP failed, assume Write Enabled
    Aug 14 13:52:06 seer kernel: sda: asking for cache data failed
    Aug 14 13:52:06 seer kernel: sda: assuming drive cache: write through
    Aug 14 13:52:06 seer kernel: sda:end_request: I/O error, dev sda, sector 0
    Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
    Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
    Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
    Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
    Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
    Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
    Aug 14 13:52:06 seer kernel: Dev sda: unable to read RDB block 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
    Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
    Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
    Aug 14 13:52:06 seer kernel: unable to read partition table
    Aug 14 13:52:06 seer kernel: SCSI device sdb: 21502464 512-byte hdwr sectors (11009 MB)
    Aug 14 13:52:06 seer kernel: sdb: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdb: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdb: sdb1
    Aug 14 13:52:06 seer kernel: SCSI device sdc: 421476864 512-byte hdwr sectors (215796 MB)
    Aug 14 13:52:06 seer kernel: sdc: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdc: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdc: sdc1
    Aug 14 13:52:06 seer kernel: SCSI device sdd: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sdd: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdd: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdd: sdd1
    Aug 14 13:52:06 seer kernel: SCSI device sde: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sde: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sde: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sde: sde1
    Aug 14 13:52:06 seer kernel: SCSI device sdf: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sdf: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdf: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdf: sdf1
    Aug 14 13:52:06 seer kernel: SCSI device sdg: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sdg: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdg: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdg: sdg1
    Aug 14 13:52:06 seer kernel: SCSI device sdh: 2107390464 512-byte hdwr sectors (1078984 MB)
    Aug 14 13:52:06 seer kernel: sdh: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdh: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdh: sdh1
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdi, sector 0
    Aug 14 13:52:06 seer kernel: Buffer I/O error on device sdi, logical block 0
    Aug 14 13:52:06 seer kernel: sdi : READ CAPACITY failed.
    Aug 14 13:52:06 seer kernel: sdi : status=1, message=00, host=0, driver=08
    Aug 14 13:52:06 seer kernel: sd: Current: sense key: Illegal Request
    Aug 14 13:52:06 seer kernel: Add. Sense: Logical unit not supported
    Aug 14 13:52:06 seer kernel:
    Aug 14 13:52:06 seer kernel: sdi: test WP failed, assume Write Enabled
    Aug 14 13:52:06 seer kernel: sdi: asking for cache data failed
    Aug 14 13:52:06 seer kernel: sdi: assuming drive cache: write through
    Aug 14 13:52:06 seer kernel: sdi:end_request: I/O error, dev sdi, sector 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdi, sector 0
    Aug 14 13:52:06 seer last message repeated 4 times
    Aug 14 13:52:06 seer kernel: Dev sdi: unable to read RDB block 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdi, sector 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdi, sector 0
    Aug 14 13:52:06 seer kernel: unable to read partition table
    Aug 14 13:52:06 seer kernel: SCSI device sdj: 21502464 512-byte hdwr sectors (11009 MB)
    Aug 14 13:52:06 seer kernel: sdj: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdj: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdj: sdj1
    Aug 14 13:52:06 seer kernel: SCSI device sdk: 421476864 512-byte hdwr sectors (215796 MB)
    Aug 14 13:52:06 seer kernel: sdk: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdk: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdk: sdk1
    Aug 14 13:52:06 seer kernel: SCSI device sdl: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sdl: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdl: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdl: sdl1
    Aug 14 13:52:06 seer kernel: SCSI device sdm: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sdm: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdm: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdm: sdm1
    Aug 14 13:52:06 seer kernel: SCSI device sdn: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sdn: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdn: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdn: sdn1
    Aug 14 13:52:06 seer kernel: SCSI device sdo: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sdo: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdo: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdo: sdo1
    Aug 14 13:52:06 seer kernel: SCSI device sdp: 2107390464 512-byte hdwr sectors (1078984 MB)
    Aug 14 13:52:06 seer kernel: sdp: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdp: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdp: sdp1
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdq, sector 0
    Aug 14 13:52:06 seer kernel: sdq : READ CAPACITY failed.
    Aug 14 13:52:06 seer kernel: sdq : status=1, message=00, host=0, driver=08
    Aug 14 13:52:06 seer kernel: sd: Current: sense key: Illegal Request
    Aug 14 13:52:06 seer kernel: Add. Sense: Logical unit not supported
    Aug 14 13:52:06 seer kernel:
    Aug 14 13:52:06 seer kernel: sdq: test WP failed, assume Write Enabled
    Aug 14 13:52:06 seer kernel: sdq: asking for cache data failed
    Aug 14 13:52:06 seer kernel: sdq: assuming drive cache: write through
    Aug 14 13:52:06 seer kernel: sdq:end_request: I/O error, dev sdq, sector 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdq, sector 0
    Aug 14 13:52:06 seer last message repeated 5 times
    Aug 14 13:52:06 seer kernel: Dev sdq: unable to read RDB block 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdq, sector 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdq, sector 0
    Aug 14 13:52:06 seer kernel: unable to read partition table
    Aug 14 13:52:06 seer kernel: SCSI device sdr: 21502464 512-byte hdwr sectors (11009 MB)
    Aug 14 13:52:06 seer kernel: sdr: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdr: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdr: sdr1
    Aug 14 13:52:06 seer kernel: SCSI device sds: 421476864 512-byte hdwr sectors (215796 MB)
    Aug 14 13:52:06 seer kernel: sds: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sds: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sds: sds1
    Aug 14 13:52:06 seer kernel: SCSI device sdt: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sdt: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdt: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdt: sdt1
    Aug 14 13:52:06 seer kernel: SCSI device sdu: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sdu: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdu: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdu: sdu1
    Aug 14 13:52:06 seer kernel: SCSI device sdv: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sdv: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdv: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdv: sdv1
    Aug 14 13:52:06 seer kernel: SCSI device sdw: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sdw: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdw: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdw: sdw1
    Aug 14 13:52:06 seer kernel: SCSI device sdx: 2107390464 512-byte hdwr sectors (1078984 MB)
    Aug 14 13:52:06 seer kernel: sdx: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdx: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdx: sdx1
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdy, sector 0
    Aug 14 13:52:06 seer kernel: sdy : READ CAPACITY failed.
    Aug 14 13:52:06 seer kernel: sdy : status=1, message=00, host=0, driver=08
    Aug 14 13:52:06 seer kernel: sd: Current: sense key: Illegal Request
    Aug 14 13:52:06 seer kernel: Add. Sense: Logical unit not supported
    Aug 14 13:52:06 seer kernel:
    Aug 14 13:52:06 seer kernel: sdy: test WP failed, assume Write Enabled
    Aug 14 13:52:06 seer kernel: sdy: asking for cache data failed
    Aug 14 13:52:06 seer kernel: sdy: assuming drive cache: write through
    Aug 14 13:52:06 seer kernel: sdy:end_request: I/O error, dev sdy, sector 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdy, sector 0
    Aug 14 13:52:06 seer last message repeated 5 times
    Aug 14 13:52:06 seer kernel: Dev sdy: unable to read RDB block 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdy, sector 0
    Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdy, sector 0
    Aug 14 13:52:06 seer kernel: unable to read partition table
    Aug 14 13:52:06 seer kernel: SCSI device sdz: 21502464 512-byte hdwr sectors (11009 MB)
    Aug 14 13:52:06 seer kernel: sdz: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdz: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdz: sdz1
    Aug 14 13:52:06 seer kernel: SCSI device sdaa: 421476864 512-byte hdwr sectors (215796 MB)
    Aug 14 13:52:06 seer kernel: sdaa: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdaa: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdaa: sdaa1
    Aug 14 13:52:06 seer kernel: SCSI device sdab: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sdab: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdab: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdab: sdab1
    Aug 14 13:52:06 seer kernel: SCSI device sdac: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sdac: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdac: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdac: sdac1
    Aug 14 13:52:06 seer kernel: SCSI device sdad: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sdad: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdad: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdad: sdad1
    Aug 14 13:52:06 seer kernel: SCSI device sdae: 43006464 512-byte hdwr sectors (22019 MB)
    Aug 14 13:52:06 seer kernel: sdae: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdae: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdae: sdae1
    Aug 14 13:52:06 seer kernel: SCSI device sdaf: 2107390464 512-byte hdwr sectors (1078984 MB)
    Aug 14 13:52:06 seer kernel: sdaf: Write Protect is off
    Aug 14 13:52:06 seer kernel: SCSI device sdaf: drive cache: write through w/ FUA
    Aug 14 13:52:06 seer kernel: sdaf: sdaf1
    Aug 14 13:52:06 seer kernel: scsi_wr_disk: unknown partition table
    Aug 14 13:52:07 seer kernel: end_request: I/O error, dev sda, sector 0
    Aug 14 13:52:07 seer kernel: end_request: I/O error, dev sdi, sector 0
    Aug 14 13:52:07 seer kernel: end_request: I/O error, dev sdq, sector 0
    Aug 14 13:52:07 seer kernel: end_request: I/O error, dev sdy, sector 0
    Here's some extra info:
    # /sbin/blkid | grep asm
    /dev/sdc1: LABEL="ORCL1" TYPE="oracleasm"
    /dev/sdk1: LABEL="ORCL1" TYPE="oracleasm"
    /dev/sds1: LABEL="ORCL1" TYPE="oracleasm"
    /dev/sdaa1: LABEL="ORCL1" TYPE="oracleasm"
    /dev/dpdb1: LABEL="ORCL1" TYPE="oracleasm"
    I have learned that by excluding devices in the oracleasm configuration file I eliminate those I/O errors in /var/log/messages
    # cat /etc/sysconfig/oracleasm
    # This is a configuration file for automatic loading of the Oracle
    # Automatic Storage Management library kernel driver. It is generated
    # By running /etc/init.d/oracleasm configure. Please use that method
    # to modify this file
    # ORACLEASM_ENABELED: 'true' means to load the driver on boot.
    ORACLEASM_ENABLED=true
    # ORACLEASM_UID: Default user owning the /dev/oracleasm mount point.
    ORACLEASM_UID=oracle
    # ORACLEASM_GID: Default group owning the /dev/oracleasm mount point.
    ORACLEASM_GID=oinstall
    # ORACLEASM_SCANBOOT: 'true' means scan for ASM disks on boot.
    ORACLEASM_SCANBOOT=true
    # ORACLEASM_SCANORDER: Matching patterns to order disk scanning
    ORACLEASM_SCANORDER="dp sd"
    # ORACLEASM_SCANEXCLUDE: Matching patterns to exclude disks from scan
    ORACLEASM_SCANEXCLUDE="sdc sdk sds sdaa sda"
    # ls -la /dev/oracleasm/disks/
    total 0
    drwxr-xr-x 1 root root 0 Aug 14 10:47 .
    drwxr-xr-x 4 root root 0 Aug 13 15:32 ..
    brw-rw---- 1 oracle oinstall 251, 33 Aug 14 13:46 ORCL1
    Now I can go into dbca to create the ASM instance, which starts up fine...  create a new diskgroup, I see ORCL1 as a provision ASM disk I select it ...  Click OK
    CRASH!!!  Box hangs have to reboot it....
    I have gotten myself to exactly the same point right before clicking OK and here is what is in the ASM alertlog so far
    Fri Aug 14 14:42:02 2009
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Picked latch-free SCN scheme 3
    Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/oracle/product/11.1.0/db_1/dbs/arch
    Autotune of undo retention is turned on.
    IMODE=BR
    ILAT =0
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    Starting up ORACLE RDBMS Version: 11.1.0.6.0.
    Using parameter settings in server-side spfile /u01/app/oracle/product/11.1.0/db_1/dbs/spfile+ASM.ora
    System parameters with non-default values:
    large_pool_size = 12M
    instance_type = "asm"
    diagnostic_dest = "/u01/app/oracle"
    Fri Aug 14 14:42:04 2009
    PMON started with pid=2, OS id=3300
    Fri Aug 14 14:42:04 2009
    VKTM started with pid=3, OS id=3302 at elevated priority
    VKTM running at (20)ms precision
    Fri Aug 14 14:42:04 2009
    DIAG started with pid=4, OS id=3306
    Fri Aug 14 14:42:04 2009
    PSP0 started with pid=5, OS id=3308
    Fri Aug 14 14:42:04 2009
    DSKM started with pid=6, OS id=3310
    Fri Aug 14 14:42:04 2009
    DIA0 started with pid=7, OS id=3312
    Fri Aug 14 14:42:04 2009
    MMAN started with pid=8, OS id=3314
    Fri Aug 14 14:42:04 2009
    DBW0 started with pid=9, OS id=3316
    Fri Aug 14 14:42:04 2009
    LGWR started with pid=6, OS id=3318
    Fri Aug 14 14:42:04 2009
    CKPT started with pid=10, OS id=3320
    Fri Aug 14 14:42:04 2009
    SMON started with pid=11, OS id=3322
    Fri Aug 14 14:42:04 2009
    RBAL started with pid=12, OS id=3324
    Fri Aug 14 14:42:04 2009
    GMON started with pid=13, OS id=3326
    ORACLE_BASE from environment = /u01/app/oracle
    Fri Aug 14 14:42:04 2009
    SQL> ALTER DISKGROUP ALL MOUNT
    Fri Aug 14 14:42:41 2009
    At this point I don't want to click the OK until I am sure someone is in the office to reboot the machine manually if I do hang it again....  I hung it twice yesterday, however I did not have the devices excluded in the oracleasm configuration file as i do now
    Edited by: user10193377 on Aug 14, 2009 3:23 PM
    Well Clicking OK hun it again and I am waiting to get back into it, to see what new information might be gleened
    Does anyone have any ideas on what to check or where to look?????    Will update more once I can log back in

    Hi Mark,
    It looks like something is not correct with your raw device partition based on the error messages:
    Aug 14 13:52:06 seer kernel: Add. Sense: Logical unit not supported
    Aug 14 13:52:06 seer kernel:
    Aug 14 13:52:06 seer kernel: sda: test WP failed, assume Write Enabled
    Aug 14 13:52:06 seer kernel: sda: asking for cache data failed
    Aug 14 13:52:06 seer kernel: sda: assuming drive cache: write through
    Aug 14 13:52:06 seer kernel: sda:end_request: I/O error, dev sda, sector 0
    It could be a number of things. I would check with your vendor and Oracle support to see if the multipath software drive is supported and if there is a potential workaround for ASM. Sorry this is not quite the solution, but its what jumps to mind based on issues with multipath software and storage vendors for ASM with Linux and Oracle. Have you checked the validation matrix available on Metalink?
    Cheers,
    Ben

  • Freezes when exporting .mov files in CS4 / Adobe Media Encoder

    For the past 7 hours now I have been trying every internet remedy for the following problem, and was wondering if any of you nice people could help:
    I just came back from a ski trip, and wanted to make an edit featuring my fiends. I recorded large parts of the trip on my new iPhone, both in 720p 120fps (120.15fps, h.264 1280*720) and the normal 1080p 30fps. iPhone files are in the .mov format. I also recorded some parts on a GoPro hero hd2 camera at both 720p 60fps and 1080p 30fps. GoPro files are in the MP4 format, and i've never had a probvlem with them.
    Now all imports fine into premiere pro, and although I had a few problems with freezing while editing initially, this was quickly solved by terminating all unused (non-adobe) processes in task manager.
    So I spent a good 4 hours making a 2.5 minute edit of our day, and wanted to export it.
    So I selected the sequence, and went file>export>media, selected all of the preferences i wanted for exporting, and sent it to the Adobe media encoder.
    The media encoder loads the files for a few seconds, and then starts the encoding process. And promptly freezes. It freezes at around 10-20 seconds (depending on export preferences) after starting to encode, and never restarts. i can then pause the encode, but cancelling it crashes adobe media encoder and subsequently also crashes Premiere Pro.
    I may be mistaken here, but I have a strong suspicion that It is quicktime that is causing all this.
    So I tried the following:
    - reinstalling, downgrading, updating, etc. Quicktime
    - renaming file extensions from .mov to .mp4
    - all sorts of export preferences, from image sequences to dvd to blueray and dv. (Image sequences, interestingly, occasionally export to about half a minute into the video(also depending on preferences), then freeze)
    - crossing my fingers
    - checking for gaps in video, found none
    - updating premiere pro and media encoder
    - throwing my mouse at the wall in frustration
    - making a new project with different settings and copying in the sequence
    - disabling "Include source xmp metadata"
    - making a new user account and trying it there
    Is there anything else I can try?
    Could I copy the project itself into a different program (e.g. iMovie or Windows Movie Maker) and export from there?
    Is there an alternative to Adobe media encoder?
    Need more information?
    Thanks for the help!
    Specs:
    Premiere version: 4.2.1
    Encoder version: 4.2.0.006
    Comp specs:
    16Gb ram
    quad core i5
    256 Gb solid state (system, program files are here)
    2TB HDD (video files, scratch disk are here)
    Nvidia gtx 660 graphics
    Windows 64 bit
    1 monitor

    I bought quicktime pro today to try this, but to no avail. it just freezes up again during export.
    I tried some other fixes on that page, like renaming files to .mpg extension, which worked once during an export of a test sequence (although everything was shifted and it cut off the export at the gopro footage).
    Is there any way I can export this project to another program to export it from there perhaps?
    Thanks for the help!

  • When I try to export a file iPhoto shuts down

    Until today I had no problems.  Now if I select a file to export I get the spinning color wheel for a few seconds and then iPhoto shuts down.

    After the second or third try today iPhoto automatically "rebuilt" the library but that didn't seem to help the issue.  Here's the first part of the crash report.  It's all Greek to me.
    Process:         iPhoto [1571]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         9.4 (9.4)
    Build Info:      iPhotoProject-701064000000000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [156]
    PlugIn Path:       /Applications/iPhoto.app/Contents/PlugIns/HPPhotoExport.iPhotoExporter/Contents /MacOS/HPPhotoExport
    PlugIn Identifier: com.hp.imagezone.tab
    PlugIn Version:    2.3.7 (2.3.7)
    Date/Time:       2012-09-24 15:45:39.476 -0700
    OS Version:      Mac OS X 10.7.5 (11G56)
    Report Version:  9
    Interval Since Last Report:          42342 sec
    Crashes Since Last Report:           8
    Per-App Interval Since Last Report:  14498 sec
    Per-App Crashes Since Last Report:   7
    Anonymous UUID:                      52F63295-E24B-4180-9233-61F98416E216
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_INSTRUCTION (SIGILL)
    Exception Codes: 0x0000000000000001, 0x0000000000000000
    Application Specific Information:
    objc[1571]: garbage collection is OFF
    objc[1571]: FREED(id): message autorelease sent to freed object=0x82ee7350
    Performing @selector(showExporter:) from sender NSMenuItem 0x7a645210
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   libobjc.A.dylib                         0x9c475e49 _objc_trap + 3
    1   libobjc.A.dylib                         0x9c475da9 _objc_error + 114
    2   libobjc.A.dylib                         0x9c475e7a __objc_error + 45
    3   libobjc.A.dylib                         0x9c472876 _freedHandler + 53
    4   com.apple.Foundation                    0x97374740 +[NSURL(NSURL) fileURLWithPath:isDirectory:] + 93
    5   com.apple.Foundation                    0x9742df5c -[NSFileManager displayNameAtPath:] + 64
    6   com.hp.imagezone.tab                    0x13fc8fce -[iZTask getTargetName] + 64
    7   com.hp.imagezone.tab                    0x13fc87e4 -[iZTask initWithDict:fromBundle:] + 357
    8   com.hp.imagezone.tab                    0x13fc84d5 -[iZServices addTasksFromBundle:] + 275
    9   com.hp.imagezone.tab                    0x13fc8273 -[HPPhotoExport discoverServices] + 213
    10  com.hp.imagezone.tab                    0x13fc7c38 -[HPPhotoExport initWithExportImageObj:] + 75
    11  com.apple.iPhoto                        0x002edf39 0x91000 + 2477881
    12  com.apple.iPhoto                        0x002e89d7 0x91000 + 2456023
    13  com.apple.iPhoto                        0x002e8bb7 0x91000 + 2456503
    14  com.apple.iPhoto                        0x002e5af5 0x91000 + 2444021
    15  com.apple.AppKit                        0x994320a9 -[NSIBObjectData nibInstantiateWithOwner:topLevelObjects:] + 1389
    16  com.apple.AppKit                        0x99427dde loadNib + 380
    17  com.apple.AppKit                        0x99427423 +[NSBundle(NSNibLoading) _loadNibFile:nameTable:withZone:ownerBundle:] + 841
    18  com.apple.AppKit                        0x995d2827 -[NSBundle(NSNibLoading) loadNibFile:externalNameTable:withZone:] + 170
    19  com.apple.iPhoto                        0x002e61e7 0x91000 + 2445799
    20  com.apple.iPhoto                        0x0029056b 0x91000 + 2094443
    21  com.apple.CoreFoundation                0x9cdf4d11 -[NSObject performSelector:withObject:] + 65
    22  com.apple.AppKit                        0x99528663 -[NSApplication sendAction:to:from:] + 232
    23  com.apple.AppKit                        0x9961bcaf -[NSMenuItem _corePerformAction] + 536
    24  com.apple.AppKit                        0x9961b92c -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 171
    25  com.apple.AppKit                        0x9961afb5 -[NSMenu _performActionWithHighlightingForItemAtIndex:sendAccessibilityNotification:] + 79
    26  com.apple.AppKit                        0x998f6ef7 -[NSMenu performActionForItemAtIndex:] + 65
    27  com.apple.AppKit                        0x998f6f2a -[NSMenu _internalPerformActionForItemAtIndex:] + 45
    28  com.apple.AppKit                        0x998fb15b -[NSMenuItem _internalPerformActionThroughMenuIfPossible] + 106
    29  com.apple.AppKit                        0x99761670 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 172
    30  com.apple.AppKit                        0x99591246 NSSLMMenuEventHandler + 452
    31  com.apple.HIToolbox                     0x986ebc0c _InvokeEventHandlerUPP(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*, long (*)(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)) + 36
    32  com.apple.HIToolbox                     0x98567313 _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 1602
    33  com.apple.HIToolbox                     0x98566790 _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 482
    34  com.apple.HIToolbox                     0x9857b571 SendEventToEventTarget + 76
    35  com.apple.HIToolbox                     0x986ec0d0 _ZL18SendHICommandEventmPK9HICommandmmhPKvP20OpaqueEventTargetRefS5_PP14OpaqueE ventRef + 482
    36  com.apple.HIToolbox                     0x986ec13a SendMenuCommandWithContextAndModifiers + 70
    37  com.apple.HIToolbox                     0x9875798d SendMenuItemSelectedEvent + 275
    38  com.apple.HIToolbox                     0x985b7d79 _ZL19FinishMenuSelectionP13SelectionDataP10MenuResultS2_ + 129
    39  com.apple.HIToolbox                     0x9874888c _ZL14MenuSelectCoreP8MenuData5PointdmPP13OpaqueMenuRefPt + 608
    40  com.apple.HIToolbox                     0x985afa2a _HandleMenuSelection2 + 636
    41  com.apple.HIToolbox                     0x985af7a9 _HandleMenuSelection + 53
    42  com.apple.AppKit                        0x9948ebd2 _NSHandleCarbonMenuEvent + 302
    43  com.apple.AppKit                        0x9941f4d6 _DPSNextEvent + 2196
    44  com.apple.AppKit                        0x9941e752 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113
    45  com.apple.AppKit                        0x9941aac1 -[NSApplication run] + 911
    46  com.apple.AppKit                        0x996abac5 NSApplicationMain + 1054
    47  com.apple.iPhoto                        0x000a08b9 0x91000 + 63673
    48  com.apple.iPhoto                        0x0009ff05 0x91000 + 61189

  • I get an error when I try to export all files?

    Here is a picture of the error I get:
    http://screensnapr.com/v/R76ciV.png
    This is very frustrating, any help will be appreciated. Thanks! 

    It should reset the Photoshop preferences
    CS5 - Error 22:Window does not have a constructor
    http://forums.adobe.com/thread/622755
    How to delete/reset Photoshop preferences
    http://forums.adobe.com/thread/375776

  • IMovie crashing when I try to export

    iMovie crashes with below error when I try to export a file.Any help is appreciated.
    MacBook Air
    Yosemite 10.10.2
    The operation couldn't be completed
    (com.apple.Compressor.CompressorKit.ErrorDomain.error -1)
    Thanks,
    Steve

    Hi
    Can it be this that You mean ?
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the Application down in the Dock - not the Device)
    But this can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    Yours Bengt W

  • Error: -8969 trying to export .mov file to MPEG-4

    I have a .mov file of a band performance. The file is 1Gb in size. When I try to export this file to an MPEG-4 format with H.264 codec using QuickTime Pro on both my laptop and a work desktop, I get about 17% into it and then Error:
    -8969 Unknown error has occurred. I can't find any reference to that number in this forum, on Apple's search or Google for that matter. Does anyone have an idea? I suspect it is a problem with the file itself since it crashes the same on two different computers. Here is the original file properties:
    Format: Apple Planar RGB, 354x240, 16-bit Integer (Big Endian), Stereo, 48kHz
    Frames/sec: 29.97
    Data Size: 1.0 GB
    Data Rate: 5.34 MB
    Duration: 3:12
    I am certainly not experienced with this stuff, but apparently neither is the 'videographer' who recorded it.
    HP laptop   Windows XP Pro  

    Take the file to a friend that owns a Mac and QuickTime Pro. Pay for it if needed as it will sort out your mess.
    http://www.multimedia.cx/8bps.txt
    Basic understanding of export formats may have helped the original exporter of the file.
    What you have is a nearly "raw" file composed of an image format and a raw audio track.
    If you can ask them to send a DV stream of the same file you should be able to continue your work.
    Is the video some special image format prior to export from QuickTime?

Maybe you are looking for

  • Why does PSE4 give me an error message when trying to download

    I used to have this installed on my older mac mini 10.6.8 and it worked fine, then my computer was getting slow, so I had it wiped and everything reinstalled so it works again, but now I can't put photoshop elements 4 back on it. Also, when I try to

  • Robohelp 8 crashes after Windows 7 install

    I'm a long time user of the pre-Adobe versions of RoboHelp, and just installed a trial version of Robohelp 8 on an HP laptop running Windows 7. The program crashes when I open a menu and move to another main menu without first closing the first drop-

  • Maximum Number of Pages in an Application

    What is the maximum number of pages in an application? Numerically what would that range be? From 0 to n?

  • Nested Tables or Varrays

    Could some please let me know the differences between nested tables and varrays?

  • Multiple ViewControllers & session variables

    Hi all, We have an ADF 11g application with multiple ViewControllers (and one ADF BC model project) and I was trying to set a session-scoped variable (customer number) in one ViewController and access it in another. However, the result for the fetch