Please help when initiating resore recovery keyboard no response nor mouse
please help when recovery process applicated keyboard no response cant press enter nor any mouse response please help how can i recover my pavillion from hp
Hi Brunodaniel2345,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Notebook and recovery selection does not use the mouse or keyboard. Have you tried Tab it will take the selection to the next line?
What about putting the laptop in Safe Mode for a system restore? Here is a link to show you how.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!
Similar Messages
-
Hi I m unable to upgrade ios5.1.1.. Please help when I click on install now and agree to t&c.. It say verifying updates and then it says unable to upgrade.. Please help
Read Here > https://discussions.apple.com/message/18449560#18449560
-
PLEASE HELP when I upgraded to the new firefox my old one got deleted which had all my stuff and my mac is only 10.4.11 and wont work please help!!!
Need to Resume download to complete the ongoing Process.
Last Resort, put the iPhone in DFU mode (Google How to do that). Connect in iTunes. Follow on-screen prompts to Restore. All Data would be lost, if not backed up earlier.
To save the photographs you may have to use third party software. Google is your friend. -
Please Help,When Ever I Turn On My Mac Book Pro Terminal Usually Pop Up. Kindly Help Me To Disactivate It…….
Open Users & Groups preferences. Click on the Login Items tab on the upper right. Locate the entry for Terminal, select it, click on the Delete [-] button at the bottom.
-
Please Help! Stuck in Recovery Mode and My Player is N
If anyone can help...you would be saving me!!! I received the Zen Micro as a present last week. I have Windows Millennium. I downloaded all of the software successfully. My device is recognized by my USB, however, the Creative Zen Micro Media Explorer keeps stating that my device is not plugged in. So, I went and used the FAQ section's directions and went into Recovery Mode. Now, since I have not used this MP3 player at all yet, I am stuck in recovery mode. I downloaded all of the recent drivers, jukebox, and firmware to my PC, however, when I try to transfer the files to my Zen Micro, it states that the device is not plugged in. Now I am panicking because it is stuck in Recovery Mode, and I want to transfer my firmware, drivers, etc. Can anyone please help me?? Thank you!!!!!!!!!!!
See this support document for instructions on how to handle that situation. http://support.apple.com/kb/HT1808
-
i get a software update unavailable when updating and trying to restore my iphone please help its been 5 days already
That's because your phone was jailbroken/hacked to unlock it. It is now a brick. Buy a new phone.
-
When I try to download games eg. Dreamland HD light it says the following: your request cannot be completed. Please help.
Honestly, these are WAGs but they're all that I can think of.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again. -
I click on the Firefox tab, then "options" and THERE IS NO "Manage Account" and, therefore, NO RECOVERY KEY. Help me, please! Both my computers are Windows: one Win7, one Win8. I've spent hours and hours -- in multiple sessions over a period of months -- trying to solve this.
Thanks, Ibai and cor-el for responsing to my plea for help.
Ibai's response -- in particular his query about syncing two un-synced computers and his observation that I shouldn't need a recovery key -- made me realize that I had registered for some reason or another with Firefox back whenever, and that registration was gumming up the works. Firefox assumed I had previously synced, and now needed to re-synch (I guess). With this realization, I re-registered under another username, and (lo!) I started getting the cues I was expecting.
I'm synced, and am presently exploring the Tile Tabs add-on and totally happy again with Firefox. -
Please help, When exporting, I get the wrong size in DVD, ...I am in a hurry :)
Dear sir
I have this problem that I can not find the answer for. I have looked around. Hope someone are able to help me. I would think it would be no problem at all, but....
I use a Panasonic HDC- SD60, 1920x1080 HD
I make project by choosing the General setting as set. then I choose DV-pal widescreen 48 khz.
I import file from harddrive, and put the file to the icon "new item" to make premier choose the 1920x1080 in timeline.
then I export, using Ctrl + M. After that I choose both
default settings
and Microsoft AVI
I also tried to crop size in this window
Problem is:
ALWAYS THE SAME, THE DVD FILE HAVE BLACK SIDEBARS LEFT AND RIGHT IN THE SCREEN, NOMATHER HOW I TRY TO EXPORT.
This is the problem, I want to use a widescreen TV, and make it fit here.
PLEASE, if you know the solution...
Your making my DAY
Best regards Stig MorterudPut your HD footage in a matching sequence.
Export straight to mpeg-2 dvd or Send to Encore and let Encore do the math.
Thanks for answer.
I think I already added the HD movie in the correct sequence type. I dropped it on the icon, and the program itself provides to add the sequence of 1980x1020.
Do you agree?
If I'm going to use MPEG-2 DVD, it will reduce the quality of the movie. Also, I tried this, but the film, and the sound became there own seperat file. (?)
I thought it was like that when I chose the widescreen, so it would fit your widescreen TV. Especially when I selected the appropriate frames on the timeline. -
Please help me on this Flash keyboard code?
Heya, today is my first time doing scripting with AS3 and I would like to learn how to create a flash keyboard that will be used in a touchscreen machine. Currently I have given myself some basic feature idea for the keyboard but have not start coding it yet since I'm not familiar with flash, they should be able to switch textboxes and have backspace button, a tab button, a spacebar button. Is anyone willing to show me a tutorial or a sample code for a head start?
EDIT: I have found one AS3 keyboard,the textbox and keyboard are coded out but I need multiple textboxes.How can I drag and drop multiple textbox and keyboard into the screen instead?(because i need to have like 3 textboxes and a keyboard that I can design it, with the coded keyboard, can I change the design/color of the keyboard?) Please click on the link to check it out - http://www.mediafire.com/?31203k62zhs1p2hHello,
I have errors in this code if i use the appendText and when I press the button 'A' the letter didn come out in the textbox:
function(){return A.apply(null,[this].concat($A(arguments)))}
function(){return A.apply(null,[this].concat($A(arguments)))}function(){return A.apply(null,[this].concat($A(arguments)))}1119: Access of possibly undefined property txt through a reference with static type flash.text:TextField.
var lastSelected_tf:TextField;
stage.addEventListener(MouseEvent.MOUSE_DOWN,toggleTextbox);
function toggleTextbox(e:MouseEvent):void{
if(stage.focus is TextField){
var t:TextField = (stage.focus as TextField)
lastSelected_tf = t;
a_mc.s = "a";
a_mc.addEventListener(MouseEvent.MOUSE_DOWN,keyF);
stage.focus = lastSelected_tf;
function keyF(e:MouseEvent):void{
lastSelected_tf.text+=MovieClip(e.currentTarget).s;
//lastSelected_tf.txt=lastSelected_tf.appendText(MovieClip(e.currentTarget).s);
i've uploaded the file, please take a look http://www.mediafire.com/?sf6sm3tb5ue6dni -
Please Help - When I try to add ASM Disk to ASM Diskgroup it crashes Server
We are using a Pillar SAN and have LUNS Created and are using the following multipath device: (I'm a DBA more then anything else... but I am rather familiar with linux .... SAN Hardware not so much)
Device Size Mount Point
/dev/dpda1 11G /u01
The Above device is working fine... Below are the ASM Disks being Created
Device Size Oracle ASM Disk Name
/dev/dpdb1 198G ORCL1
/dev/dpdc1 21G SIRE1
/dev/dpdd1 21G CART1
/dev/dpde1 21G SRTS1
/dev/dpdf1 21G CRTT1
I try to create to the first ASM Disk
/etc/init.d/oracleasm createdisk ORCL1 /dev/dpdb1
Marking disk "ORCL1" as an ASM disk: [FAILED]
So I check the oracleasm log:
#cat /var/log/oracleasm
Device "/dev/dpdb1" is not a partition
I did some research and found that this is a common problem with multipath devices and to work around it you have to use asmtool
# /usr/sbin/asmtool -C -l /dev/oracleasm -n ORCL1 -s /dev/dpdb1 -a force=yes
asmtool: Device "/dev/dpdb1" is not a partition
asmtool: Continuing anyway
now I scan and list the disks
# /etc/init.d/oracleasm scandisks
Scanning the system for Oracle ASMLib disks: [ OK ]
# /etc/init.d/oracleasm listdisks
ORCL1
Here is whats going on in /var/log/messages when I run the oracleasm scandisks command
# date
Fri Aug 14 13:51:58 MST 2009
# /etc/init.d/oracleasm scandisks
Scanning the system for Oracle ASMLib disks: [ OK ]
cat /var/log/messages | grep "Aug 14 13:5"
Aug 14 13:52:06 seer kernel: dpdb: dpdb1
Aug 14 13:52:06 seer kernel: dpdc: dpdc1
Aug 14 13:52:06 seer kernel: dpdd: dpdd1
Aug 14 13:52:06 seer kernel: dpde: dpde1
Aug 14 13:52:06 seer kernel: dpdf: dpdf1
Aug 14 13:52:06 seer kernel: dpdg: dpdg1
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
Aug 14 13:52:06 seer kernel: printk: 30 messages suppressed.
Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
Aug 14 13:52:06 seer kernel: sda : READ CAPACITY failed.
Aug 14 13:52:06 seer kernel: sda : status=1, message=00, host=0, driver=08
Aug 14 13:52:06 seer kernel: sd: Current: sense key: Illegal Request
Aug 14 13:52:06 seer kernel: Add. Sense: Logical unit not supported
Aug 14 13:52:06 seer kernel:
Aug 14 13:52:06 seer kernel: sda: test WP failed, assume Write Enabled
Aug 14 13:52:06 seer kernel: sda: asking for cache data failed
Aug 14 13:52:06 seer kernel: sda: assuming drive cache: write through
Aug 14 13:52:06 seer kernel: sda:end_request: I/O error, dev sda, sector 0
Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
Aug 14 13:52:06 seer kernel: Dev sda: unable to read RDB block 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sda, sector 0
Aug 14 13:52:06 seer kernel: Buffer I/O error on device sda, logical block 0
Aug 14 13:52:06 seer kernel: unable to read partition table
Aug 14 13:52:06 seer kernel: SCSI device sdb: 21502464 512-byte hdwr sectors (11009 MB)
Aug 14 13:52:06 seer kernel: sdb: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdb: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdb: sdb1
Aug 14 13:52:06 seer kernel: SCSI device sdc: 421476864 512-byte hdwr sectors (215796 MB)
Aug 14 13:52:06 seer kernel: sdc: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdc: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdc: sdc1
Aug 14 13:52:06 seer kernel: SCSI device sdd: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sdd: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdd: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdd: sdd1
Aug 14 13:52:06 seer kernel: SCSI device sde: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sde: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sde: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sde: sde1
Aug 14 13:52:06 seer kernel: SCSI device sdf: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sdf: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdf: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdf: sdf1
Aug 14 13:52:06 seer kernel: SCSI device sdg: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sdg: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdg: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdg: sdg1
Aug 14 13:52:06 seer kernel: SCSI device sdh: 2107390464 512-byte hdwr sectors (1078984 MB)
Aug 14 13:52:06 seer kernel: sdh: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdh: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdh: sdh1
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdi, sector 0
Aug 14 13:52:06 seer kernel: Buffer I/O error on device sdi, logical block 0
Aug 14 13:52:06 seer kernel: sdi : READ CAPACITY failed.
Aug 14 13:52:06 seer kernel: sdi : status=1, message=00, host=0, driver=08
Aug 14 13:52:06 seer kernel: sd: Current: sense key: Illegal Request
Aug 14 13:52:06 seer kernel: Add. Sense: Logical unit not supported
Aug 14 13:52:06 seer kernel:
Aug 14 13:52:06 seer kernel: sdi: test WP failed, assume Write Enabled
Aug 14 13:52:06 seer kernel: sdi: asking for cache data failed
Aug 14 13:52:06 seer kernel: sdi: assuming drive cache: write through
Aug 14 13:52:06 seer kernel: sdi:end_request: I/O error, dev sdi, sector 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdi, sector 0
Aug 14 13:52:06 seer last message repeated 4 times
Aug 14 13:52:06 seer kernel: Dev sdi: unable to read RDB block 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdi, sector 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdi, sector 0
Aug 14 13:52:06 seer kernel: unable to read partition table
Aug 14 13:52:06 seer kernel: SCSI device sdj: 21502464 512-byte hdwr sectors (11009 MB)
Aug 14 13:52:06 seer kernel: sdj: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdj: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdj: sdj1
Aug 14 13:52:06 seer kernel: SCSI device sdk: 421476864 512-byte hdwr sectors (215796 MB)
Aug 14 13:52:06 seer kernel: sdk: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdk: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdk: sdk1
Aug 14 13:52:06 seer kernel: SCSI device sdl: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sdl: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdl: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdl: sdl1
Aug 14 13:52:06 seer kernel: SCSI device sdm: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sdm: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdm: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdm: sdm1
Aug 14 13:52:06 seer kernel: SCSI device sdn: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sdn: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdn: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdn: sdn1
Aug 14 13:52:06 seer kernel: SCSI device sdo: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sdo: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdo: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdo: sdo1
Aug 14 13:52:06 seer kernel: SCSI device sdp: 2107390464 512-byte hdwr sectors (1078984 MB)
Aug 14 13:52:06 seer kernel: sdp: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdp: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdp: sdp1
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdq, sector 0
Aug 14 13:52:06 seer kernel: sdq : READ CAPACITY failed.
Aug 14 13:52:06 seer kernel: sdq : status=1, message=00, host=0, driver=08
Aug 14 13:52:06 seer kernel: sd: Current: sense key: Illegal Request
Aug 14 13:52:06 seer kernel: Add. Sense: Logical unit not supported
Aug 14 13:52:06 seer kernel:
Aug 14 13:52:06 seer kernel: sdq: test WP failed, assume Write Enabled
Aug 14 13:52:06 seer kernel: sdq: asking for cache data failed
Aug 14 13:52:06 seer kernel: sdq: assuming drive cache: write through
Aug 14 13:52:06 seer kernel: sdq:end_request: I/O error, dev sdq, sector 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdq, sector 0
Aug 14 13:52:06 seer last message repeated 5 times
Aug 14 13:52:06 seer kernel: Dev sdq: unable to read RDB block 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdq, sector 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdq, sector 0
Aug 14 13:52:06 seer kernel: unable to read partition table
Aug 14 13:52:06 seer kernel: SCSI device sdr: 21502464 512-byte hdwr sectors (11009 MB)
Aug 14 13:52:06 seer kernel: sdr: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdr: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdr: sdr1
Aug 14 13:52:06 seer kernel: SCSI device sds: 421476864 512-byte hdwr sectors (215796 MB)
Aug 14 13:52:06 seer kernel: sds: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sds: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sds: sds1
Aug 14 13:52:06 seer kernel: SCSI device sdt: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sdt: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdt: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdt: sdt1
Aug 14 13:52:06 seer kernel: SCSI device sdu: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sdu: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdu: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdu: sdu1
Aug 14 13:52:06 seer kernel: SCSI device sdv: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sdv: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdv: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdv: sdv1
Aug 14 13:52:06 seer kernel: SCSI device sdw: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sdw: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdw: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdw: sdw1
Aug 14 13:52:06 seer kernel: SCSI device sdx: 2107390464 512-byte hdwr sectors (1078984 MB)
Aug 14 13:52:06 seer kernel: sdx: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdx: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdx: sdx1
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdy, sector 0
Aug 14 13:52:06 seer kernel: sdy : READ CAPACITY failed.
Aug 14 13:52:06 seer kernel: sdy : status=1, message=00, host=0, driver=08
Aug 14 13:52:06 seer kernel: sd: Current: sense key: Illegal Request
Aug 14 13:52:06 seer kernel: Add. Sense: Logical unit not supported
Aug 14 13:52:06 seer kernel:
Aug 14 13:52:06 seer kernel: sdy: test WP failed, assume Write Enabled
Aug 14 13:52:06 seer kernel: sdy: asking for cache data failed
Aug 14 13:52:06 seer kernel: sdy: assuming drive cache: write through
Aug 14 13:52:06 seer kernel: sdy:end_request: I/O error, dev sdy, sector 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdy, sector 0
Aug 14 13:52:06 seer last message repeated 5 times
Aug 14 13:52:06 seer kernel: Dev sdy: unable to read RDB block 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdy, sector 0
Aug 14 13:52:06 seer kernel: end_request: I/O error, dev sdy, sector 0
Aug 14 13:52:06 seer kernel: unable to read partition table
Aug 14 13:52:06 seer kernel: SCSI device sdz: 21502464 512-byte hdwr sectors (11009 MB)
Aug 14 13:52:06 seer kernel: sdz: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdz: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdz: sdz1
Aug 14 13:52:06 seer kernel: SCSI device sdaa: 421476864 512-byte hdwr sectors (215796 MB)
Aug 14 13:52:06 seer kernel: sdaa: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdaa: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdaa: sdaa1
Aug 14 13:52:06 seer kernel: SCSI device sdab: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sdab: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdab: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdab: sdab1
Aug 14 13:52:06 seer kernel: SCSI device sdac: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sdac: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdac: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdac: sdac1
Aug 14 13:52:06 seer kernel: SCSI device sdad: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sdad: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdad: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdad: sdad1
Aug 14 13:52:06 seer kernel: SCSI device sdae: 43006464 512-byte hdwr sectors (22019 MB)
Aug 14 13:52:06 seer kernel: sdae: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdae: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdae: sdae1
Aug 14 13:52:06 seer kernel: SCSI device sdaf: 2107390464 512-byte hdwr sectors (1078984 MB)
Aug 14 13:52:06 seer kernel: sdaf: Write Protect is off
Aug 14 13:52:06 seer kernel: SCSI device sdaf: drive cache: write through w/ FUA
Aug 14 13:52:06 seer kernel: sdaf: sdaf1
Aug 14 13:52:06 seer kernel: scsi_wr_disk: unknown partition table
Aug 14 13:52:07 seer kernel: end_request: I/O error, dev sda, sector 0
Aug 14 13:52:07 seer kernel: end_request: I/O error, dev sdi, sector 0
Aug 14 13:52:07 seer kernel: end_request: I/O error, dev sdq, sector 0
Aug 14 13:52:07 seer kernel: end_request: I/O error, dev sdy, sector 0
Here's some extra info:
# /sbin/blkid | grep asm
/dev/sdc1: LABEL="ORCL1" TYPE="oracleasm"
/dev/sdk1: LABEL="ORCL1" TYPE="oracleasm"
/dev/sds1: LABEL="ORCL1" TYPE="oracleasm"
/dev/sdaa1: LABEL="ORCL1" TYPE="oracleasm"
/dev/dpdb1: LABEL="ORCL1" TYPE="oracleasm"
I have learned that by excluding devices in the oracleasm configuration file I eliminate those I/O errors in /var/log/messages
# cat /etc/sysconfig/oracleasm
# This is a configuration file for automatic loading of the Oracle
# Automatic Storage Management library kernel driver. It is generated
# By running /etc/init.d/oracleasm configure. Please use that method
# to modify this file
# ORACLEASM_ENABELED: 'true' means to load the driver on boot.
ORACLEASM_ENABLED=true
# ORACLEASM_UID: Default user owning the /dev/oracleasm mount point.
ORACLEASM_UID=oracle
# ORACLEASM_GID: Default group owning the /dev/oracleasm mount point.
ORACLEASM_GID=oinstall
# ORACLEASM_SCANBOOT: 'true' means scan for ASM disks on boot.
ORACLEASM_SCANBOOT=true
# ORACLEASM_SCANORDER: Matching patterns to order disk scanning
ORACLEASM_SCANORDER="dp sd"
# ORACLEASM_SCANEXCLUDE: Matching patterns to exclude disks from scan
ORACLEASM_SCANEXCLUDE="sdc sdk sds sdaa sda"
# ls -la /dev/oracleasm/disks/
total 0
drwxr-xr-x 1 root root 0 Aug 14 10:47 .
drwxr-xr-x 4 root root 0 Aug 13 15:32 ..
brw-rw---- 1 oracle oinstall 251, 33 Aug 14 13:46 ORCL1
Now I can go into dbca to create the ASM instance, which starts up fine... create a new diskgroup, I see ORCL1 as a provision ASM disk I select it ... Click OK
CRASH!!! Box hangs have to reboot it....
I have gotten myself to exactly the same point right before clicking OK and here is what is in the ASM alertlog so far
Fri Aug 14 14:42:02 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/oracle/product/11.1.0/db_1/dbs/arch
Autotune of undo retention is turned on.
IMODE=BR
ILAT =0
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.6.0.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.1.0/db_1/dbs/spfile+ASM.ora
System parameters with non-default values:
large_pool_size = 12M
instance_type = "asm"
diagnostic_dest = "/u01/app/oracle"
Fri Aug 14 14:42:04 2009
PMON started with pid=2, OS id=3300
Fri Aug 14 14:42:04 2009
VKTM started with pid=3, OS id=3302 at elevated priority
VKTM running at (20)ms precision
Fri Aug 14 14:42:04 2009
DIAG started with pid=4, OS id=3306
Fri Aug 14 14:42:04 2009
PSP0 started with pid=5, OS id=3308
Fri Aug 14 14:42:04 2009
DSKM started with pid=6, OS id=3310
Fri Aug 14 14:42:04 2009
DIA0 started with pid=7, OS id=3312
Fri Aug 14 14:42:04 2009
MMAN started with pid=8, OS id=3314
Fri Aug 14 14:42:04 2009
DBW0 started with pid=9, OS id=3316
Fri Aug 14 14:42:04 2009
LGWR started with pid=6, OS id=3318
Fri Aug 14 14:42:04 2009
CKPT started with pid=10, OS id=3320
Fri Aug 14 14:42:04 2009
SMON started with pid=11, OS id=3322
Fri Aug 14 14:42:04 2009
RBAL started with pid=12, OS id=3324
Fri Aug 14 14:42:04 2009
GMON started with pid=13, OS id=3326
ORACLE_BASE from environment = /u01/app/oracle
Fri Aug 14 14:42:04 2009
SQL> ALTER DISKGROUP ALL MOUNT
Fri Aug 14 14:42:41 2009
At this point I don't want to click the OK until I am sure someone is in the office to reboot the machine manually if I do hang it again.... I hung it twice yesterday, however I did not have the devices excluded in the oracleasm configuration file as i do now
Edited by: user10193377 on Aug 14, 2009 3:23 PM
Well Clicking OK hun it again and I am waiting to get back into it, to see what new information might be gleened
Does anyone have any ideas on what to check or where to look????? Will update more once I can log back inHi Mark,
It looks like something is not correct with your raw device partition based on the error messages:
Aug 14 13:52:06 seer kernel: Add. Sense: Logical unit not supported
Aug 14 13:52:06 seer kernel:
Aug 14 13:52:06 seer kernel: sda: test WP failed, assume Write Enabled
Aug 14 13:52:06 seer kernel: sda: asking for cache data failed
Aug 14 13:52:06 seer kernel: sda: assuming drive cache: write through
Aug 14 13:52:06 seer kernel: sda:end_request: I/O error, dev sda, sector 0
It could be a number of things. I would check with your vendor and Oracle support to see if the multipath software drive is supported and if there is a potential workaround for ASM. Sorry this is not quite the solution, but its what jumps to mind based on issues with multipath software and storage vendors for ASM with Linux and Oracle. Have you checked the validation matrix available on Metalink?
Cheers,
Ben -
I have had my Ipad for about a year and regualrly transfer pictures from my pc to Ipad using ITunes. for some reason when i have tried to do this again the computer comes up with message that I cannot use my IPad as it needs 11.1 version. I have downloaded latest version of Itunes. Pease help as I am pretty hopeless with IT. Thanks
It sounds like you still have to update it.
It's very easy to do. If you have OSX iTunes, go to iTunes>Check for Updates. If you have Windows, go to Help>Check for Updates -
Please help :( When I try to export to a Windows Media....
I use flip4mac to convert my final cut projects into WMV but when I do that the files are huge and are much too big to upload to my website. What I've been doing is exporting the files as an MOV and then using Quicktime's "export for web" function to turn them into MPEG 4 (which are much smaller files) and then converting that file into WMV which turns out to be a more manageable size without losing a much picture and sound quality. Obviously this is an extremely convoluted way to do things and is very time consuming. I know there must be a simple way to use the Quicktime Conversion option straight out of Final Cut into a internet friendly sized WMV file but I can't figure out the settings
I know this is probably a simpleton question but I have no formal Final Cut training so I'm self taught and I probably do everything backasswards. If one of you could help me I would be soooo grateful.
Sincerely,
ChristineIf the WMV files are too big when you export directly to that format, try using different settings. Even the cheapest flip4mac plugin includes several presets.
-DH -
PLEASE HELP IM STUCK IN RECOVERY MODE WITH NO BACKUP
CAN ANYBODY PLEASE TELL ME WHAT TO DO. IM STUCK IN RECOVERY MODE, IVE NEVER BACKED UP MY IPHONE AND I CANT RESTORE IT TO FACTORY BECAUSE IT WILL DELETE ALL MY DATA.
<Edited by Host>It's too late to back up now and you need to restore. Why did you not back up?
-
Please help - iPod touch 4g recovery mode loop
Today I decided I'd update my iPod, however once done I got the message 'iTunes has detected iPod in recovery mode, you must restore this iPod before you can connect it with iTunes'. However when I do restore it it also wants me to 'restore and update' and after downloading the update for 15 minutes nothing happens. Everything still stays the same and when I replug my iPod it just wants me to download the update all over again.
This is driving me mad helpLook, calm down, I have been through a boot loop also because I was tampering with something I shouldn't have been while in SFTP... Haha.... All you have to do is put it in DFU mode to restore. First connect it to the PC, open iTunes, then you hold down the sleep button, count to 3, WITHOUT RELEASING THE SLEEP BUTTON, you hold down the Home button and count to 10, then take your finger off of the sleep button and keep holding the home button, then your PC should start downloading the apple recover drivers and iTunes will give you a message prompting you that it has detected an iPod in recovery mode, press restore, and voilla!! DFU fixes just about any problem besides outright smashing your device with a hammer. As an important note, make sure your iTunes is at the current version, as I ran into an error (21) countless times because of an older version.
Maybe you are looking for
-
Upgraded to 10.3.9 and now Safari won't open, lil help pls
I finally took the big step and upgraded from 10.3.8 to 10.3.9, did all the right things, disconnected my FW External HD, ran Cocktail, ran disk utility, repaired permissions; BUT, since I've completed all the updates and the 10.3.9 upgrade, I cannot
-
What variable type for database
Hi to all.. I would like to ask advice on what is the best type of variable to store and manage data. I am basically trying to build a small database of customer, names, address, tel number etc. The data is read and then saved into a simple excel or
-
I'm getting this error message "the iTunes library itl cannot be read because it was created by a newer version of iTunes. When I've tried to redownload it, nothing happens.
-
After upgrading to 6.1.1 phone is not shutting down manually instead it restart immediately.
After upgrading to 6.1.1 phone 4S is not shutting down manually instead it restart immediately.
-
I want to attach an external mirror drive to my G5 iMAC to use as a time machine back up and shared drive. I have my computers networked as shared over an airport extreme. So here are my questions. When setting up the shared drive on my other macs