PLEASE HELP windows vista langu

I have tried to change the original language my windows vista program came in which is spanish into english. I have tried to do everything i can and read all the options/ isntructions it told me, but nothing changes the language. PLEASE HELP ME!!!

First off all this forum is for discussions about Creative's soundcards in Windows Vista and not a general Vista forum. Second I don't think you can change the language in Windows. I think you have to buy a new copy of Vista that is in english. I may be wrong, but I don't think so.

Similar Messages

HT1331 Please help Windows user find disk on network...I'm stumped

I'm running Windows Vista and Windows 7 on another PC. Neither can even connect with the AIrPort Extreme by typing 10.0.1.1 in my browser. It shows up fine with AirPort Utility, it's IP is in fact 10.0.1.1. Internet works, file sharing from PC to PC works. I tried turning off the firewall, tried all the suggestions on this site as well.
Because 10.0.1.1 doesn't work in my browser I can't even get to the step of mounting the drive via Map Network Drive since it won't recognize 10.0.1.1 let alone \\10.0.1.1\My Book\.
Using Airport Utility and choosing Disk I can see the disk just fine, it's just not accessable via the network.
I'm connected to the internet via a DSL modem and my basestation is the PPPoE client set to be a DCHP server.
Also, I can ping 10.0.1.1 no problem.
Please help. I'm stumped.
Thank you.

I got a hold of a Mac and when I typed \\10.0.1.1 in it's browser it crashed Safari every time. So that didn't get me far.
You do not open network resources in a browser.. you do not use double backslash in any OS except windows..
To open the TC disk in Mac OS.. just open finder..
The Time Capsule should list in finder under shared.
It is automagical.. but if you do need to open it.. use the Go .. Go to Server in the top menu of finder and type AFP://10.0.1.1
Or SMB://10.0.1.1
If you still have the Mac available please try again. If it does not show up in finder.. even if the disk shows up I think you have formatted it wrongly.
Exactly what format is the disk?? TC has very limited formats it can read.. basically FAT32 and HFS+..
Please plug the disk into the Mac and format the disk HFS+.. you can still write to it from a PC on the network. HFS+ is far superior format to FAT32.
Once the Mac can read it connected to the AEBS then the windows computers can work. without the Mac working the PC will never see it.

Have downloaded my library from a portable hard drive to itunes but not showing in library on home site please help windows 8

trying to download music from portable harddrive and wont go to I tunes library saving as I tunes link. working on windows 8..... Please help

I'm not sure if iTunes will like to run those files if they're on an external drive. Honestly I've never tried. Have you tried dragging a few songs, maybe an album, into your 'music' part of your drive, then try to import them into iTunes?
I moved computers a couple of months ago and that's waht I did, saved my music to a portable drive, then dragged it back onto my C drive and into the music folder, then imported it into iTunes.

Please help (windows 7)

Dear All,
I installed "oracle 10g application server release 2 patch 3" on windows 7, i used Internet Explorer 8 and Firefox to browse by applications, but it is very slow.
i use the same on windows XP and it works just fine.
is there any thing that i can do to make my application run in the right way. because i have a demo tomorrow morning and i have to finish now.
please help.

There's more to come, the update is three parts afaik
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Need Help - Windows Vista and Latest Flash Player

Have Windows Vista and Adobe for viewing video. Just recently I was unable to
view the videos. Pop-up showed that I needed to update to the Flash Player 11. I down loaded
as instructed and was advised that download was successful but still can't view the videos
since the same sign shows up. Have tried to see what I'm missing but without much luck.

What is your browser? If IE:
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

Help, windows vista doesn't recognize iphone, can't restore

Hello everyone, I'm having a problem syncing my iPhone 3g with iTunes to restore it. I received an iphone 3g 16gb from a friend because he didn't want to try to fix it. He told me it broke after he dropped it. Boots up to the apple logo and just stays there, sometimes spinning, sometimes not.
So I started reading around the net trying to find ways to fix it. I've tried hard resetting (home and wake/sleep same time for 10 secs) and that didn't help. I've tried hooking it up to an itunes with the most recent update and restoring from there. The problem is, my laptop doesn't detect the iphone at all. I have a VAIO with VISTA Business and it is not detecting the phone at all when I plug it in, doesn't show up in device manager or give any indication that the iphone is plugged in other than when I plug it in, the phone boots up to the apple. I've tried plugging in the phone and going into recovery mode from there and I can bring up the screen that shows itunes and the usb cable but nothing shows up in itunes. I've tried getting into DFU mode, but my laptop is still not detecting it.
I'm running out of ideas so I thought I'd post on the web. Has anybody run into this problem before? I've googled it and checked this forum and others and havent found anything. Is my iphone bricked? Anyone with any experience with similar problems, please let me know!

A bit of a long shot but you could try and reset the nvram using a stop+N key sequence. Like I said a bit of a long shot which I do not expect to work as it seems you have tried most things.
I assume that both keyboards work ok on another system and that there are not loose connections between the keyboard, mouse, monitor and the system.
Does the system boot up, pass diags, etc when the ttya is used. It might be worth while stress testing the system with something like SUNVts.
You need to also keep in mind this might genuinely be a connector fault with the motherboard, perhaps caused while taking the system apart or moving it.

Please Help; Windows 7 Home Premium to Professional.

In requirement for an IT class, I installed Windows 7 Professional over my Windows 7 Home Edition installation on my netbook. I have encountered a seriously problem though, as Windows 7 Professional seems to be stuck in Safe Mode and will not let me connect
to the internet (The little red X is next to the networking icon on the bottom right hand of the screen, despite my Ethernet cable being plugged in). I must have done the installation wrong
I need to restore my old windows configuration (that's in my Windows.old file) and be able to connect to the internet. Can anybody help me?

I will suggest you to check and update Network drivers and check the results. Or you can share a screenshot from device manager if you're not sure.
Here's an article for downgrade : http://www.addictivetips.com/windows-tips/downgrade-windows-7-enterprise-to-ultimate-professional-or-home-premium-edition/
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Please help: Windows XP will not install PLEASE

I know this maybe answered else where but I have limited computer access at the time and ANY help will be GREATLY appreciated.
K8N Neo2 Platinum w/amd64 3500
1 gig of kingston mem
200 gb and a 60 gb Maxtor sata drives (non raid setup)
A cd burner and a dvd burner
I can post and boot to bios with no problems and everything shows up fine.
I insert Win xp pro cd and everything goes well and then all of a sudden it starts saying it can't find files on the cd while copying them onto the hard drive. I have tried several times and it always happens, sometimes different files. I have also tried an Win XP Home cd with the exact same results. The Win xp pro cd came with the SP2 on it.
I have tried many combos on my drives: installing on the 200gb, installing on the 60gb, unplugging one or the other, plugging in to sata 1/2 and sata3/4!!!! I have also reinstalled all the hardware again, checking each cable as I went along. I also reseated the cpu and cleaned thermal compound, but fresh on and hooked up fan (Zalman cnps7000a)
I HAVE NOT installed the raid drives when xp ask for the f6 thing. I don't want raid, just 2 drives.
PLEASE Any help will be greatly appreciate!!!!!
LoneStar

Hi. I just popped onto the forums to post a topic almost identical to this one, but with a few key differences - so I'd thought I'd stick it in here instead of taking up space.
Here's the gist of things -
My Dad and I recently built a PC over Christmas (well, he built, I watched and drank tea.), and it worked fine - half life 2 was downloaded and then completed. Now however, the problems have begun. (this isn't about half life 2, by the way.)
First, the specs - (I know these need more detail, such as PSU and voltages. I'll add those soon.)
MSI K8N Neo2 Nvidia nForce 3 Ultra Chipset motherboard
Athlon 64 Bit 3000+ CPU
1GB Corsair RAM
160 GB Sata Hard Drive
nVIDIA GeForec 6800 GT
Windows XP Home Edition SP2
Bios V 1.3
Plus onboard sound, floppy/7-in-1 card reader and DVD/CD RW. I'll post the motherboard specs later, I'm at work at the moment and I can't remember them.
Right, down to business - I tried to connect and install an external wireless LAN card through a USB connection (I know this card works as it was used on my old PC) and to cut a long story short, I messed it up by using the wrong drivers - and I made things worse by trying to fix it in a hurry, basically screwing up windows. So, I'd thought I'd re-format the hard drive and re-install windows. It was a new PC, there was nothing important on it, and I thought it was about time I learnt how to do a format anyway.
Now the problem - despite formatting my hard drive (and thus removing the old, bad, copy of windows) Windows XP Home will now not complete its installation.
It gets through to the third part of the installation (i.e. my computer has rebooted twice so far) where it asks you questions like "Lets set up windows together" and "Lets choose your automatic update settings". Here, (and I've tried this formatting/reinstallatino twice) the PC reboots for no reason, and the standard "Your computer has restarted due to a failure" on a black screen with white writing pops up - offering to start normally, with last known good configuration or in safe mode.
Still with me? Phew, almost there...
Now, whatever I choose, the computer reboots again and then a BLUE screen with white writing pops up saying my computer was turned off in order to stop damage occuring. Here's a summary of the writing including what I thought were the important points:-
"DRIVER_IRQL_NOT_LESS_OR_EQUAL
Disable bios memory options like caching or shadowing
STOP: 0x0000000D1 (0x00FFFFE3, 0x00000002, 0x0000000, 0xF7AD24EB)
Usbochi.sys-address F7AD24EB base at F7ACF000, Datestamp 41107d6"
Also, two more important points. When my dad was putting together the PC, we made changes to the bios, AFTER windows was installed. (Although I'm at work and haven't got them with me yet - I'll post them later.) This means these changes are still present - could they be causing the problem? (And hence would resetting the CMOS help?)
Secondly, I have a SATA hard drive. I've already tried using the SATA drivers from floppy during windows installation, but when I do this the same problem occurs, even earlier - this time windows doesn't even finish copying basic setup files. It jams on "cdaudio.sys" and then crashes to the blue screen.
Any suggestions or ideas you guys have would be of great help - I'm all out of them myself!
(Also, one more point - I conducted the format by changing the bios boot setting to boot from CD, then booting from the windows CD, then deleting the partition/formating the HD/re-installion windows in this manner.)
Remember - a big shiney hug for the first person to help me back to half life 2 goodness!
Cheers,
Spurros.
EDIT - the floppy I used to install the SATA drivers had nforce 3 SATA RAID driver (G72-NVSA020) written on it.

Please help, Windows install screwed up

Hey Guys, i've researched and followed all your guys' advice when installing windows via bootcamp. Last night, i got my vista SP1 OEM cd and followed bootcamps install procedures. It didn't give me an option to choose NTFS or VAT. I inserted my windows CD, it restarted, then when following the instructions I couldn't choose the bootcamp partition because it stated it wasnt an NTFS format. Well i left the house and my fiance didn't know what happened so she turned off the mac and tried restarting it. Now when it starts up, it gets to the windows green bar going across the screen then just stops. I can't get the CD out, i can't do anything past that point. I really need your guy's help.
Thanks.
(i have a intel imac btw)

Hi and welcome to Discussions,
to get the Vista DVD out, try restarting your Mac while holding down the left mouse button.
usually that ejects the DVD.
After that's done:
1. Restart the computer.
2. Hold down the Option key during restart to run Startup Manager.
3. Once Startup Manager appears, select the Mac OS X volume.
4. Launch Boot Camp Assistant.
5. Select Create or Remove a Windows Partition and click Restore.
6. Check with System Preferences - Startup Volume if your OSX volume is set to be the Default startup volume
7. Might be good to do a reboot of your Mac at this point.
That gets rid of the BootCamp Windows partition for now and puts you back to square one.
Have a look at the pages 6-11 of the BootCamp Install Guide to be found here http://www.apple.com/support/bootcamp/
Hope it helps
Stefan

Cannot open down loads ,i have windows vista , fire fox will not open downloads

please keep it simple for me to understand ..i have windows vista ,, 32 bit .. on a gateway .. when i download to fire fox ,,it will not let me open the window to finish download , in the past it was working ,,but then in the last few weeks it doesnot ,, please help .. vista sucks ,,nothing but problems from day one .
Brent,,,, [email protected]

that does not work ,, i will try to explain again ,, if i were to try and download the latest fire fox ,,it will down load ,,and i can see it in the window ,,but when i go to hit open ,,the letters that say open are like in a fog and it wont do anything ,,i started having problems with this about 3 weeks ago ,i have removed just about everything i can ,,including all of my msn stuff ,, it really has me by my ass . i have also gone to system restore several times ,,, so again people ,,please understand ,,i can download and see them in the window ,,but when i go to hit the open ,,the letters are in a fog and nothing happens

My itunes doesnt show anything it has been hapening for a week already and ive done everything on the itunes support even reinstalling it please help

my itunes stores doesnt show anything and ive tryed everything on the apple support page even reinstalling it please help

Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002) HP-Pavilion RK573AA-ABA a1710n iTunes 10.4.0.80 QuickTime 7.7 FairPlay 1.12.20 Apple Application Support 2.0.1 iPod Updater Library 10.0d2 CD Driver 2.2.0.1 CD Driver DLL 2.1.1.1 Apple Mobile Device 3.4.1.2 Apple Mobile Device Driver 1.57.0.0 Bonjour 3.0.0.2 (333.2) Gracenote SDK 1.9.1.485 Gracenote MusicID 1.9.1.102 Gracenote Submit 1.9.1.133 Gracenote DSP 1.9.1.43 iTunes Serial Number 002DB3D803DAE110 Current user is not an administrator. The current local date and time is 2011-08-12 01:17:45. iTunes is not running in safe mode. WebKit accelerated compositing is enabled. HDCP is not supported. Core Media is supported. Video Display Information NVIDIA, NVIDIA GeForce 6150 LE **** External Plug-ins Information **** No external plug-ins installed. iPodService 10.4.0.80 is currently running. iTunesHelper 10.4.0.80 is currently running. Apple Mobile Device service 3.3.0.0 is currently running. **** Network Connectivity Tests **** Network Adapter Information Adapter Name: {56717430-C007-489A-97FF-BD28BDD088D5} Description: NVIDIA nForce 10/100/1000 Mbps Ethernet IP Address: 10.0.0.4 Subnet Mask: 255.255.255.0 Default Gateway: 10.0.0.1 DHCP Enabled: Yes DHCP Server: 10.0.0.1 Lease Obtained: Thu Aug 11 17:07:44 2011 Lease Expires: Fri Aug 12 17:07:44 2011 DNS Servers: 10.0.0.1 Active Connection: LAN Connection Connected: Yes Online: Yes Using Modem: No Using LAN: Yes Using Proxy: No SSL 3.0 Support: Enabled TLS 1.0 Support: Enabled Firewall Information Windows Firewall is on. iTunes is enabled in Windows Firewall. Connection attempt to Apple web site was successful. Connection attempt to browsing iTunes Store was successful. Connection attempt to purchasing from iTunes Store was successful. Connection attempt to iPhone activation server was successful. Connection attempt to firmware update server was unsuccessful. The network connection timed out. Connection attempt to Gracenote server was successful. Last successful iTunes Store access was 2011-08-11 18:38:20.

Windows vista Error response-PLEASE HELP

Recently purchased a new computer w/Vista. Problem is that I couldn't transfer my songs from my old computer, so decided to use IGADGET to transfer from my IPOD. Error:retrieving the COM CLASS FACTORY for component w/CLSID. Please help if you have any idea how I can fix the error. I've installed Itunes 7.11 and reinstalled and it keeps happening.

I don't know about the originator, but I still require assistance. The help link didn't solve my issue, so further help would be welcomed.
I have Vista Ultimate (came with new computer), with the UAC turned off (it was interfering with Microsoft Money). I get the same popup error as noted before, and I've done the regsvr32 on vbscript.dll multiple times. I'm on an admin account, I've used an admin command window, and I've even tried running the iTunes setup as admin, as well as in compatibility mode as XP SP2.
I thought maybe my existing iTunes 7.0 install was interfering, so I tried to remove it via Control Panel, and I got the exact same error. So I can't remove what I have and I can't install the upgrade.
The only good news is that my iPod Photo finally started synching with the computer, if only in manual mode. I can't burn CDs however.
Assistance appreciated. Thanks.

My itunes will not open in Windows Vista, I have tried everything suggested on the apple website, there is some type of plug-in issue..can someone please help me?

Hello,
I need help! My itunes will not open in Windows Vista. I have tried everything suggested by the apple website. Even when I open itunes in safe mode, it still will not allow me to continue. I am assuming when it says something about Plug-ins that has something to do with the problem. Can anyone help me?

Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items.

Problems with iTunes on Windows Vista...please help

All started with my Laptop recognizing my iPad and iTouch just as a camera
I keep getting this error in spite of all the methods already listed....one step from formatting....this is the order of appearance of the errors please i need help
ALREADY TRIED:
-Uninstall-reinstall
-new ADMIN STAT user
-Cleaning APPLE related archives and reinstalling
-opening install with WinRAR and selecting what to install
-all forum solutions
Im using Windows Vista
THX

... I'm not sure I've ever helped someone from the Canary Islands before ...
Fault Module Name: mcicda.dll
Fault Module Version: 6.0.6000.16386
That's part of your Windows operating system, relating to the MCI driver for cdaudio devices.
Perhaps try running an sfc /scannow as per:
[How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7|http://support.microsoft.com/kb/929833]
Does sfc repair any files? If so, does your iTunes start launching properly again afterwards?

TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Try this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

PLEASE HELP windows vista langu

Similar Messages

Maybe you are looking for