Please help with 4 sticks of Kingston RAM
Hello. I bought the 875P-LSR Neo board and have been having nothing but troubles with it. Maybe someone here can give me some help. I have a P4 3.2 GHZ CPU (NOT the extreme one), an ATI 9800XT video card. I bought 4 512MB sticks of Kingston KVR400X64C25/512 which is on their approved memory list. I cannot get this board to work with 4 sticks of RAM, even when I set it to BIOS defaults. I have updated to BIOS 1.9, or whatever the lastest is. It just posts, loads XP then reboots. I don't want to overclock or anything, I just want to run at 3.2 GHZ with 2 GB of RAM. If I run two sticks in slots 1 and 3 it runs ok, but I get ALOT of program crashed in XP. I'm sure it has something to do with memory speeds or voltages, I am just letting the board config the memory, I think it is using 2.5,4,4,8 and 2.6 V. Anyone out there have any suggestions for getting this memory to work. In reading the boards I saw that this board has problems with 4 memory sticks. They shouldn't be advertising this board can handle 4 GB of RAM if that is the case. Any advice is greatly appreciated
Quote
Originally posted by cenolar
I am also trying to get 4 512 Kingston moduels to work. I have to set the voltage to at least 2.8V to get the system to boot up. But even when it boots up, I get the blue screen of death after about 20 minutes. I have tried the suggested timings but I still have the same issues.
It seems to run fine with just 2 modules, but I bought 4 for a reason!
I am now contemplating a new MOBO. Any suggestions?
I have read so many posts on kingston memory not working or reading wrong spd's my advice would be get some OCZ . Just my 2 penny's worth
Similar Messages
-
I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.
If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.
-
How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
Please help with proper steps, if any.Also see... these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141 -
Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreekI am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline. -
Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.
Adobe - Lightroom : For Macintosh
Hal -
[ETL]Could you please help with a problem accessing UML stereotype attributes ?
Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank youHi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana -
Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs
Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
Thanks,
Hussein -
Welcome.
At the outset, I'm sorry for my English
Please help with configuration Photoshop CS6 appearance.
How to disable the background of the program so you can see the desktop. (same menus and tools)
i wantto be the same effect as CS5.Please try turning off
Window > Application Frame -
cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?
If you mean updae server
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Otherwise what server are you talking about -
Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work
You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
Regards. -
Please help with slideshow problems!
Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing. Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened". How can I save a
slideshow inprogress and be able to reopen and continue to edit and make slideshow? I want to thank anyone who can help me with this in advance as I
have gotten so frustrated that I want to just scream.
ThanksThanks for the help, thought I had done so but maybe not. Anyway will have another go at it, now may I ask another
question? I am trying to add audio to slideshow. I have some music I purchased thru amazon as mp3 files but I get
message no codec and when I try to add wmv I get same message. What type of file do I need and how can I add
multiple songs to one slideshow. I have one little wmv file that will go in, but it just replicates itself multiple times until
it fills slide show.
Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
Date: Sun, 26 Dec 2010 20:34:32 -0700
From: [email protected]
To: [email protected]
Subject: Please help with slideshow problems!
You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
Now you are most probably using only the Output command: that is what makes the wmv file.
You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
-- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
-- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
-- The 1st entry on that Shortcuts bar is "Save Project"
It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing. Save each Project with a unique name.
After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
Note: you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
> -
Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.
Hello Priyanks,
I found an article with steps you can take to troubleshoot issues with an iPhone not connecting to your car stereo:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?
Following the fix here worked for me:
https://discussions.apple.com/message/15680566#15680566
except my plist file was in ~/Library instead of /Library.
-Scott -
hi, when i am listening music and the screen goes to sleep my music stop playing.Please help with settings
No problem. And no worries, several people have made this same mistake!
Either way enjoy the iPod!
Brock -
Please read my story because I really need some help...
I've had my Macbook Pro for only a little over a year now but it has already given me tons of problems and headaches. I was very happy when I first got it but over the next few months I noticed strange things with it. For instance, the lid is slightly bent but not so much that it still looks ordinary when closed. I was annoyed with it but I tolerated it since it is not that disruptive. Then dust appeared underneath a small part of the screen, forming a rather conspiscuous, slightly discolored spot. Again I was annoyed but I just went with it. And then after only 5 months after purchase, something related to the hard drive broke. I think the ribbon cable that was connecting it to the motherboard died or something. It was still under warranty so it was easily fixed. A few months passed without incidents. Then a month after its warranty expired, it started to have kernel panics every single day. Most of the time the screen would just become a mass of messed up colors and nothing would respond. Sometimes the screen just went black and then the computer shuts itself down. Other times the computer just freezes with nothing responding and I have to force shut it down. I sent it to an Apple service center and had it diagnosed. The genius said that the hard drive is damaged and needs replacing but other components are still fine. So I bought a new hard drive and had it replaced. For a few weeks, the problem seem to have gone but soon, the kernel panics started again and occurred more frequently. After days of research I finally found out the problem is RAM related. I tested each stick and each slot and concluded that the bottom ram slot was busted. The Apple Service Center offered no help but to replace the motherboard (or logic board). I cannot go with this because I already spent a ton of money in purchasing the computer. I also could not get Apple Care because it is very expensive and I had no ability to spend more. So I resorted to just buying a single 4gb ram stick and tried to live with only one ram slot. I thought that I could finally relax and try to enjoy the computer even with all of its annoyances. But only a few days ago the Wifi just turned itself off and won't turn on. Only after a restart will it start working again. I tried to tolerate it but it keeps turning itself off just minutes after I turn the computer on. I suspect that it might be a hardware problem (again) because the same thing is also happening with my Bootcamp partition; wifi disconnects and will not reconnect. Bluetooth also is not working anymore. I know that this is a vague question but I'm desperate. Is there anything at all that I can do in order to fix all of the problems and prevent all sorts of headaches? I feel that I have tolrated enough and I just can't take it anymore. I want to have it replaced but I do not know how I am going to do that without Applecare (which again is very expensive for someone like me). Please help me. I do not want to go back to normal, less expensive PC's. If this keeps up then I will be forced to do so because it is very expensive to buy another macbook.Sorry to hear about your unfortunate experience but I do not think you can get AppleCare at this point in time.
Can I purchase the AppleCare Protection Plan anytime?
You can purchase the AppleCare Protection Plan anytime within the one-year limited warranty period. Your eligibility for coverage under the AppleCare Protection Plan starts from your hardware purchase date. Apple strongly recommends that you purchase the AppleCare Protection Plan when you purchase your Apple product to maximize the additional benefits provided under the plan.
You will most likely need to try to sell the mac for a parts machine and consider a PC. You may wish to explore Apple refurbished Macs that have a warranty of a1 year.
There are also many sellers of used Macs but since there aren't any extended warranties it is some what risky.
Maybe you are looking for
-
HP laserjet P2035 on airport express not playing nice with Windows
I recently bought a new HP laserjet P2035 and hooked it up to my network via the usb connector on an airport express 802.11n. The Airport Express extends my network created on an Airport extreme 802.11n dualband. I have a MBP 13 and it prints fine. T
-
Is there a blu-ray writer that works for the mac
Is there a blu-ray writer that works for the iMac?
-
i have a problem my toshiba laptop screen went black and i've tryed this: press 0 + power buttom and the i got again black screen with a msg : a disk read error occurred press ctrl+alt+del to restart i did it many time but it cames back to the same d
-
Gettig a spry javascript error
I create a form and when after I insert a Spry text validation field and fill out the dialog box, I get this error: While executing inspectSelection in Spry_ValidationTextField.htm, a javascript error occurred. I hit OK and then I get it again and th
-
Hi all We are extracting some data from a source system but suddenly that source system is changed to client 200 to client 400 When we want to load some data in dev we cant find old source system again what will be the solution we have assign new so