Please help with a few drivers for z60m after fresh install

I got a bad virus(several actually) that I could not eradicate. I was advised to just wipe and reinstall the OS since it is not under warranty anymore. I could not find the recovery disk, must have been lost inthe last military move could not find a replacement recovery disk at the IBM website so I went out and bought an xpprof OS thinking it should not be that hard to find any drivers XP does not provide . I had no problems doing that on our acer laptop and a friends HP laptop before so was pretty confident.. Boy was I wrong this has been the reinstall from hell. I reinstalled the audiodrivers from theIBM website but the speakers still don't work. The laptop will not recognize the wireless, even after installing the drivers for that and I can't find anything out about why the dock does not work, I assume there are drivers for that too. I also have 4 ugly yellow question marks that I can't seem to get rid of in device manager. At this point I am already out the price of XP Prof but I really need this laptop my husband took the acer laptop when he deployed to Afghanistan, only because I was confident I could get this one fully functional. I see now my self confidence was badly misplaced ,even though I am working on a degree in computer technology this laptop is kicking my tush.
Is there anyone that could help please
1. help me find why my speakers still dont work even though they are recognized as soundmax in device manager
I found several references to this issue in the forums but there does not seem to be a resolution
2. help me figure out why my laptop suddenly (after the fresh install)does not know it even has a wireless capability even after numerous attempts at installing the driver(driver seems to install just finebut upon reboot there is still no wireless available
3. figure out how I can get my dock to work again
the laptop has always worked great til now and all these things were functional before the virus and reinstall of the OS)
4. get rid of ugly yellow exclamation points under Other Devices, I am sure they must be important( I am sure at least one or more of them has to do with the wireless)
sorry this is so long Im just frustrated thanks so much for anyone that can give some guidance on this

hanaleia, welcome to the forum,
download and install ThinkVantage System Update, it should get the drivers for you. Please ensure you read down the site as you may need to install a patch for XP SP2.
Let us know how you get on.
Regards
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Similar Messages

Problem with MTRR - X doesn't start after fresh install

Hi all!
I have a big problem with MTRR, i think...
My PC Specs: P4 3GHZ with HT "prescot", Asus P4S800D-X, ATI x1650 Pro, 1024MB Ram Dual Channel, etc...
I can't start the X system. When i try to try the new Xorg.conf, the X seems to start but the screen stays blank and sometimes can i go back to TTY and sometimes not...
I've tryed with the following drivers and no luck.
- Vesa: Blank Screen, sometimes keyboard works and sometimes not.
- RadeonHD: The same...
- Radeon (or ati): The same...
At the end of the Xorg.0.log, i see the MTRR problem. the memory from the VGA Card is not detected automatically. The "cat /proc/mtrr" differs from ubuntu 8.04, when the X server works correctly.
Ive been reading a lot in google and others forum and see a lots of tricks related to MTRR (but im not completly sure of that's the problem...) but every trick i try doesn't seems to work.
I tryed the following tricks:
- Adding the memory to /proc/mtrr manually = Added correctly but NO LUCK
- Activate/Deactivate HotPlugging = NO LUCK
- Adding to my boot line the "nopat" and "enable_mtrr_cleanup = MTRR keeps showing wrong memory (no video memory)
- After adding correctly the memory to MTRR try the xorg.conf but blank screen (i dunno if xorg rewrites the mtrr when run)
- Some others tricks i cant remember...
Also, with the radeonhd, i get this errors in xorg.0.log:
- rhdAtomgetDDCIndex: GPIO_DDC Index 14 exceeds maximum 5
- RHDCSStop: Command Submission backen is not active!
- error setting MTRR ( base... blablabla) Invalid argument (22)
That's not my first install, but i can't make it work. As i readed, it's a kernel problem related to 2.6.29, in 2.6.28 there's no problem but i dont have access to the old kernel.
Can someone help my or i need to wait for a new kernel release to use Arch?
Bye!
Last edited by Driskol (2009-04-17 11:36:26)

Driskol wrote:but i dont have access to the old kernel
I can't solve your problem, but I can help you work around it by downgrading if nobody else can figure it out.
You can find old packages here at the Arch Rollback Machine project repo someone thankfully keeps running,
http://arm.nrk.cc/
Just go to 'core' and get the package(s) you need and downgrade. There is also a thread on here somewhere about setting up pacman.conf to point to a specific date with ARM if you don't want to get individual stuff manually, but just doing it individually would probably be easier, as I don't expect the kernel has too many other things you need
Last edited by FrozenFox (2009-04-17 10:51:42)

Please help with a storage question for Ideapad S 10-2

Hello everyone, my name is Orela and I'm from Croatia. Last year i bought Lenovo S 10-2 and was happy with it but recently it broke down and wouldn't start. I have a warranty and would like to send it to be repared.
I have credit card information, personal e mail exchanges as well as family photos on the computer however and would rather repairmen couldn't go through my content.
My friend took out the hard disk but I remember that Windows 7 was on separate "unit".
Does S 10-2 have one 160 GB hard disk that contains 2 partitions (one for storage and other for Windows 7) or does it have one 160 GB hard disk + separate storage medium for Windows 7?
Thans for your help,
Orela

Here's some help:
File Sharing on Macs
Mac 101- File sharing
You have a home network setup so everything you need is in place. Also select Mac Help from the Finder's Help menu and search for "file sharing."

Please Help with the sql below for hierarchies

Hi all.
I have a table named stg_org_hier whose data looks like this
i would like to build the hierarchy from BU,AREA,REGION,DISTRICT,TERR
There are data cyles in the data below
stg_org has this data
QTR_CD     HIER_LVL_CD CURR_RDT_ID     DISTRICT_RDT_ID
2007Q4     AREA     E0F7B00000000     E0F7B00000000
2007Q4     BU     E0F7B00000000     E0F7B00000000
2007Q4     AREA     E0F7B40000088     E0F7B40000000
2007Q4     REGION     N0F7B40400000     E0F7B40000000
2007Q4     REGION     E0F7B40700000     E0F7B40000000
2007Q4     AREA     E0F7B00000088     E0F7B00000000
2007Q4     AREA     E0F7B40000000     E0F7B00000000
2007Q4     DISTRICT     N0F6B40405C99     N0F7B40400000
2007Q4     REGION     N0F7B40400088     N0F7B40400000
2007Q4     DISTRICT     N0F7B40405M99     N0F7B40400000
2007Q4     TERR     N0F1B40405201     N0F7B40405M99
they would like to see the output in the below in the below form
QTR_CD     HIER_LVL_CD CURR_RDT_ID     DISTRICT_RDT_ID
2007Q4     BU     E0F7B00000000     E0F7B00000000
2007Q4     AREA     E0F7B00000000     E0F7B00000000
2007Q4     AREA     E0F7B00000088     E0F7B00000000
2007Q4     AREA     E0F7B40000000     E0F7B00000000
2007Q4     AREA     E0F7B40000088     E0F7B40000000
2007Q4     REGION     E0F7B40700000     E0F7B40000000
2007Q4     REGION     N0F7B40400000     E0F7B40000000
2007Q4     DISTRICT     N0F6B40405C99     N0F7B40400000
2007Q4     REGION     N0F7B40400088     N0F7B40400000
2007Q4     DISTRICT     N0F7B40405M99     N0F7B40400000
2007Q4     TERR     N0F1B40405201     N0F7B40405M99
Here is the sql i have written :
select curr_terr_rdt_id,district_rdt_id,hier_lvl_cd,level from STG_ORG_QTR_SF_HCHY
connect by prior
curr_terr_rdt_id=district_rdt_id

qtr_cd,hier_lvl_cd,curr_rdt_id, district_rdt_id
2007Q4,BU,         E0F7B00000000,E0F7B00000000
2007Q4,AREA,       E0F7B00000000,E0F7B00000000
2007Q4,AREA,       E0F7B00000088,E0F7B00000000
2007Q4,AREA,       E0F7B40000000,E0F7B00000000
2007Q4,AREA,       E0F7B40000088,E0F7B40000000
2007Q4,REGION,     E0F7B40700000,E0F7B40000000
2007Q4,REGION,     N0F7B40400000,E0F7B40000000
2007Q4,DISTRICT,   N0F6B40405C99,N0F7B40400000
2007Q4,REGION,     N0F7B40400088,N0F7B40400000
2007Q4,DISTRICT,   N0F7B40405M99,N0F7B40400000
2007Q4,TERR,       N0F1B40405201,N0F7B40405M99Not having a database at hand right now is helpful this time ;)
Indenting the data clearly shows that the hierarchy rules are being violated (cycles you are mentioning do not matter in this case):
Each node must have a unique predecessor except the root having none (in your case data on lines 3 and 4 both point to lines 1 and 2)
2007Q4,BU,         E0F7B00000000,E0F7B00000000
2007Q4,AREA,       E0F7B00000000,E0F7B00000000
       2007Q4,AREA,       E0F7B00000088,E0F7B00000000
       2007Q4,AREA,       E0F7B40000000,E0F7B00000000
              2007Q4,AREA,       E0F7B40000088,E0F7B40000000
              2007Q4,REGION,     E0F7B40700000,E0F7B40000000
              2007Q4,REGION,     N0F7B40400000,E0F7B40000000
                     2007Q4,DISTRICT,   N0F6B40405C99,N0F7B40400000
                     2007Q4,REGION,     N0F7B40400088,N0F7B40400000
                     2007Q4,DISTRICT,   N0F7B40405M99,N0F7B40400000
                            2007Q4,TERR,       N0F1B40405201,N0F7B40405M99Removing the first data line or changing it's curr_rdt_id will make hierarhical queries work (lines 1 and 2 would better not point to themself)
Regards
Etbin
Message was edited by: Etbin
user596003

Installing drivers for T61 after re-installing OS

Hi,
I have just re-installed XP Pro onto this computer. I did not use the lenovo recovery disks so i will need to now download the drivers. But i am confused as to EXACTLY WHAT i need to download. Can someone help me. I did download the ethernet driver so i can connect to the internet. But i am not sure what else to download. The lenovo support/download site lists several drivers but again i am not sure what i need and if there is any order required to the download. Can someone help?

Hi welchs101!
ThinkVantage System Update will find which drivers and software apply to your system, and let you choose which ones to install.
Hope this helps!
I don't work for Lenovo. I'm a crazy volunteer!

Urgent! Please HELP with EBCC sycn!!

I recently upgraded to portal 4.0 sp2 and ebcc sp2.
When I tried to sync to one of our production server, I got this error:
Jul 22, 2002 10:53:14 AM CDT patientPortalServe Error Data Synchronizati
Application: patientportal; No message available. Resource
not found: transport.http.parameters.log Resource bundle: c
om/bea/p13n/management/data/datasync
java.lang.IllegalArgumentException: No message available. Resource not found:
transport.http.parameters.no.message.id.log Resource bundle: com/bea/p13n/management/data/datasync
     at com.bea.p13n.management.data.transport.servlets.DataSyncServlet.doPost(DataSyncServlet.java:281)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
I read some previous messages while people had the same problme, it seems to be
caused by out-of-date dataSync web application.
I have updated our datasync application by copying the whole datasync directory
from wlcs sample (most files are dated March 11, 2002). Is this the right way
to do? Is there any other possible reason?
My entire development and the production are all stopped at this point due to
the EBCC sync problem. Ergent, please help!!
Ellen

Ellen,
I just did a fresh install of WLP 4.0 SP2 to verify this.
If you look in:
C:\bea\wlportal4.0\applications\p13nApp\datasync\WEB-INF\lib
You should see a single file (datasync_servlet.jar). If you open this file
you should see a single class file of size 12,417 bytes and with time stamp
4/19/2002 9:45 PM - this is the SP2 version of the data sync web
application. You MUST ensure that you are using this version for all your
application being synced from an SP2 EBCC.
FYI:
Release Size (bytes) Timestamp on
DataSyncServlet.class
WLP 4.0 GA 11,984 10/22/2001
WLP 4.0 SP1 11,984 10/22/2001
WLP 4.0 SP2 12,417 4/19/2002
WLP 4.0 SP3 - - not yet released, but
code has been patched
WLP 7.0 GA 14,909 6/24/2002
Note that we have now implemented version checking between the client and
the server, so in the next (full) release you will get a decent error
message if the client and the server versions are not compatible.
Hope that helps.
Sincerely.
Daniel Selman
"ellen" <[email protected]> wrote in message
news:[email protected]...
>
I recently upgraded to portal 4.0 sp2 and ebcc sp2.
When I tried to sync to one of our production server, I got this error:
Jul 22, 2002 10:53:14 AM CDT patientPortalServe Error DataSynchronizati
Application: patientportal; No message available. Resource
not found: transport.http.parameters.log Resource bundle: c
om/bea/p13n/management/data/datasync
java.lang.IllegalArgumentException: No message available. Resource notfound:
transport.http.parameters.no.message.id.log Resource bundle:com/bea/p13n/management/data/datasync
atcom.bea.p13n.management.data.transport.servlets.DataSyncServlet.doPost(DataS
yncServlet.java:281)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2495)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
I read some previous messages while people had the same problme, it seemsto be
caused by out-of-date dataSync web application.
I have updated our datasync application by copying the whole datasyncdirectory
from wlcs sample (most files are dated March 11, 2002). Is this the rightway
to do? Is there any other possible reason?
My entire development and the production are all stopped at this point dueto
the EBCC sync problem. Ergent, please help!!
Ellen

Iphone 5- Won't show up in itunes. Error message " Device drivr software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Error message " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
Thanks!

Please help with an sql to show more than one records into single row for each student

From the following data I would like to create an sql to get the information as the following layout
studentid, firstTerm, EnglishMark1,ScienceMark1,MathsMark1, Secondterm,EnglishMark2,ScienceMark2,MathsMark2,
ThirdTerm,EnglishMark3,ScienceMark3,MathsMark3 // As single rows for each student
Example
1 First, 30,40,20,Sec,30,40,20, simillarly next row for next row for another sudent. Please help to generate the sql for the same.
Please help it would be very appreciate.
With Thanks
Pol
polachan

create table yourdata (studentid int, term varchar(10), section varchar(50), Mark int)
insert into yourdata values
(1,'First','Math',20),(1,'First','English',30),(1,'First','Science',40),
(2,'First','Math',20),(2,'First','English',30),(2,'First','Science',40),
(3,'First','Math',20),(3,'First','English',30),(3,'First','Science',40),
(1,'Sec','Math',20),(1,'Sec','English',30),(1,'Sec','Science',40),
(2,'Sec','Math',20),(2,'Sec','English',30),(2,'Sec','Science',40),
(3,'Sec','Math',20),(3,'Sec','English',30),(3,'Sec','Science',40)
Select studentid
,max(case when term='First' and section='English' Then Mark End) as EnglishMark1
,max(case when term='First' and section='Science' Then Mark End) as ScienceMark1
,max(case when term='First' and section='Math' Then Mark End) as MathMark1
,max(case when term='Sec' and section='English' Then Mark End) as EnglishMark2
,max(case when term='Sec' and section='Science' Then Mark End) as ScienceMark2
,max(case when term='Sec' and section='Math' Then Mark End) as MathMark2
,max(case when term='Third' and section='English' Then Mark End) as EnglishMark3
,max(case when term='Third' and section='Science' Then Mark End) as ScienceMark3
,max(case when term='Third' and section='Math' Then Mark End) as MathMark3
From yourdata
Group by studentid
drop table yourdata

I have been able to access a site regularly but in the last few days get a message: "cookies required to access this site." please help, I use this site for work daily:)

I have been able to access a site regularly but in the last few days get a message: "cookies required to access this site." please help, I use this site for work daily:)

Goto > Settings > Safari... Enable Cookies > Always
Good luck!

Welcome. At the outset, I'm sorry for my English :) Please help with configuration Photoshop CS6 appearance. How to disable the background of the program so you can see the desktop. (same menus and tools) Chiałbym to be the same effect as CS5.

Welcome.
At the outset, I'm sorry for my English
Please help with configuration Photoshop CS6 appearance.
How to disable the background of the program so you can see the desktop. (same menus and tools)
i wantto be the same effect as CS5.

Please try turning off
Window > Application Frame

HT3209 Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
Regards.

I bought an iphone from a pawn shop and have no contact with the previous owner, but need to get past the icloud activation please help, i paid good money for this phone

Please help with my iPhone I bought from a pawn shop but have no contact with the previous owner so I cannot get past the icloud activation Please anyone help. it would mean a lot, I paid good money for this phone

Return it to the pawn shop and get your money back. The device is permanently locked and with the previous owner to unlock it you can never use it except as a paperweight.

HT5824 I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. Please help with turning my iMessage completely off..

I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.

If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.

Please help with "You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported." I have seen other responses on this but am not a techie and would not know how to start with that solution.

Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreek

I am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline.

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be ab

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.

Adobe - Lightroom : For Macintosh
Hal

Please help with a few drivers for z60m after fresh install

Similar Messages

Maybe you are looking for