Please help with AMD HD8970m

Hi, could anyone please help me? I have a GX 70 3be laptop from msi and i recently upgraded the vbios for my 8970 from the msi global website, only the new vbios has downclocked the memory from 1250 to 900 mhz. (this bothers me because for example dota 2 should be playable with at least 60 fps but i usually get ~ 55 with often framedrops to 40~45)
I was wondering if i could flash the vbios of a R9 M290X as i heard they are the same board, the only things are that 1) I am not sure this is possible even though i saw on a few threads that it is I want to be sure and 2) the R9 M290X has 4 gb of memory and the vbios is made for this but i have the 2gb version of the 8970 wouldn't that be a problem?
I don't necessarily want to flash an r9 m290x vbios i would be happy if i could just flash back to the 004 version (can i downgrade to an older version?) but i have searched a LOT on the internet and i haven't found a stock or modded vbios for the 8970m all i can find is the r9 m290x when i search for a vbios for my 8970(they don't have a 8970m bios in their pretty big collection but they do show me an r9 one when i search for my vbios).
Also i would like to state that i would have overclocked the gpu with a software such as msi afterburner or overdrive but i have tried both and i can't modify anything in them, msi afterburner doesn't show anything if I switch to unofficial overclocking and overdrive only shows the 8650g card in the a10 5750m apu. In catalyst control center 8970m is lisited but as a linked adapter(8650g being the primary adapter).
All help is greatly appreciated.

Here is step by step guide that is a good tutorial and should get you started
http://www.overclockers.com/step-guide-overclock-amd-phenom/

Similar Messages

HT5824 I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. Please help with turning my iMessage completely off..

I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.

If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.

How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore. Please help with proper steps, if any.

How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
Please help with proper steps, if any.

Also see... these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141

Please help with "You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported." I have seen other responses on this but am not a techie and would not know how to start with that solution.

Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreek

I am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline.

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be ab

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.

Adobe - Lightroom : For Macintosh
Hal

[ETL]Could you please help with a problem accessing UML stereotype attributes ?

Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank you

Hi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana

Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs

Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs

Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
Thanks,
Hussein

Welcome. At the outset, I'm sorry for my English :) Please help with configuration Photoshop CS6 appearance. How to disable the background of the program so you can see the desktop. (same menus and tools) Chiałbym to be the same effect as CS5.

Welcome.
At the outset, I'm sorry for my English
Please help with configuration Photoshop CS6 appearance.
How to disable the background of the program so you can see the desktop. (same menus and tools)
i wantto be the same effect as CS5.

Please try turning off
Window > Application Frame

HT201210 cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

If you mean updae server
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Otherwise what server are you talking about

HT3209 Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
Regards.

Please help with slideshow problems!

Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing. Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened". How can I save a
slideshow inprogress and be able to reopen and continue to edit and make slideshow? I want to thank anyone who can help me with this in advance as I
have gotten so frustrated that I want to just scream.
Thanks

Thanks for the help, thought I had done so but maybe not. Anyway will have another go at it, now may I ask another
question? I am trying to add audio to slideshow. I have some music I purchased thru amazon as mp3 files but I get
message no codec and when I try to add wmv I get same message. What type of file do I need and how can I add
multiple songs to one slideshow. I have one little wmv file that will go in, but it just replicates itself multiple times until
it fills slide show.
Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
Date: Sun, 26 Dec 2010 20:34:32 -0700
From: [email protected]
To: [email protected]
Subject: Please help with slideshow problems!
You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
Now you are most probably using only the Output command: that is what makes the wmv file.
You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
-- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
-- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
-- The 1st entry on that Shortcuts bar is "Save Project"
It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing. Save each Project with a unique name.
After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
Note: you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
>

Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.

Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.

Hello Priyanks,
I found an article with steps you can take to troubleshoot issues with an iPhone not connecting to your car stereo:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Thank you for using Apple Support Communities.
Best,
Sheila M.

My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

Following the fix here worked for me:
https://discussions.apple.com/message/15680566#15680566
except my plist file was in ~/Library instead of /Library.
-Scott

Ipod Nano 6th generation setting issue - hi, when i am listening music and the screen goes to sleep my music stop playing.Please help with settings

hi, when i am listening music and the screen goes to sleep my music stop playing.Please help with settings

No problem. And no worries, several people have made this same mistake!
Either way enjoy the iPod!
Brock

Please help with my incessant spinning wheel of death!

I have almost always had the spinning circle of death… Almost the whole life of this late 2011 15" 4 GB mbp. I just can not easily use this computer anymore. It takes so long to do anything. I need to exit all apps but the one I am using to make it work. I have to restart is almost daily to make it do much. So frustrating! Please help!
I already tried a disk repair under disk utlility with no issues shown.
I read on another post to run an etrecheck app and to post that info. Here is what it says.
EtreCheck version: 2.1.8 (121)
Report generated March 3, 2015 at 11:54:29 AM CST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Late 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,2
    1 2.2 GHz Intel Core i7 CPU: 4-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 395
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1280 x 800
    AMD Radeon HD 6750M - VRAM: 512 MB
System Software: ℹ️
    OS X 10.10.1 (14B25) - Time since boot: 0:14:27
Disk Information: ℹ️
    Hitachi HTS545050B9A302 disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 498.88 GB (201.30 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 499.25 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/MacKeeper/AntiVirus.app
    [not loaded]    net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) [Click for support]
    [loaded]    net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.FTDI.driver.FTDIUSBSerialDriver (2.2.14) [Click for support]
    [not loaded]    com.bodymedia.codelessAB185.kext (1) [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.mackeeper.MacKeeper.plugin.AntiTheft.daemon.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [running]    com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [running]    com.mackeeper.MacKeeper.Helper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    HP Product Research    UNKNOWN (missing value)
Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    Flip4Mac WMV Plugin: Version: 2.4.2.4 [Click for support]
    NP_2020Player_WEB: Version: 5.0.9.0 - SDK 10.6 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    CouponPrinter-FireFox_v2: Version: 1.1.10 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: Java 7 Update 45 Check version
User internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 6.2 [Click for support]
Safari Extensions: ℹ️
    Pin It Button
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 498.88 GB Disk used: 297.57 GB
    Destinations:
        Data [Network]
        Total size: 3.00 TB
        Total number of backups: 20
        Oldest backup: 2014-11-12 12:23:49 +0000
        Last backup: 2015-03-03 17:22:41 +0000
        Size of backup disk: Excellent
            Backup size 3.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
         7%    WindowServer
         0%    fontd
         0%    Memory Clean
         0%    AppleSpell
         0%    notifyd
Top Processes by Memory: ℹ️
    279 MB    AntiVirus
    146 MB    Safari
    146 MB    MacKeeper Helper
    90 MB    WindowServer
    73 MB    ocspd
Virtual Memory Information: ℹ️
    410 MB    Free RAM
    2.07 GB    Active RAM
    606 MB    Inactive RAM
    1.12 GB    Wired RAM
    2.19 GB    Page-ins
    725 KB    Page-outs
Diagnostics Information: ℹ️
    Mar 3, 2015, 11:38:29 AM    Self test - passed
    Mar 3, 2015, 10:33:54 AM    /Library/Logs/DiagnosticReports/softwareupdated_2015-03-03-103354_[redacted].cp u_resource.diag [Click for details]

I just saw a post on MacKeeper causing serious issues... Is that something that could be attributing to my problems??

Please help with AMD HD8970m

Similar Messages

Maybe you are looking for