Please help with any info

I'm looking to buy this Toshiba 32 inch hdtv, TOS-32SL415UBX |, but I can't find any info on it what so ever. Does anyone have this model? What year is it? How is the t.v? Any info provided will be greatly appreciated. Thank You.

ocbrandis,
Oh no! I'm sorry to hear you no longer remember your password or My Verizon information. It's important to get it back. What device model do you have? The phone number can be found in device information. If you don't recall or cannot find device information, please send me a direct message.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Similar Messages

Please help with routing info

Hello, and thanks in advance for any help you can provide to my situation. I am looking to find the most stable and efficient way to route the following studio equipment. I am running Logic Pro 7.1.1 on a Mac dual 2.0 G5 (not intel), just got a MOTU 2408 mk3 as the PCI interface. I also just purchased a Mackie Onyx 800 R (8 pre-amps), as well as already having a Mackie 400 F (4 more pres, as well as being able to insert 4 channels of my ART Pro VLA outboard compression on the first 4 channels, before conversion into the computer, 'to tape' if you will). I don't need the 400 F's firewire or monitoring features anymore, as the MOTU 2408 mk 3 comes with a CueMix monitoring feature. Really I would just like to use the 4 pres with inserts.
I have 2 questions, one about audio routing and the other regarding clock source and syncing these devices in the best way. In terms of audio routing, the available digital outs on the 800 R are either ADAT or the DB25 ->AES/EBU or SPDIF connector. The 400 F unit adds another S/PDIF in/out (2 channels). The available digital inputs of the MOTU 2408 are 3 banks of 8 channels of ADAT lightpipe (up to 96kHz via S/MUX), 3 banks of TDIF via DB25 connectors, one bank of S/PDIF (only bank C), and one bank of 8 analog inputs via 1/4" balanced connections. These banks are interchangeable, except the S/PDIF only allowed on bank C. The 400 F provides an additional 8 analog inputs/outputs via 1/4" balanced.
Audio routing, is this right? To run the 800 R ADAT outs via lightpipe into one bank of OPTICAL of the 2408, say at 48k (so all 8 channels are sent with one cable, rather than splitting higher resolutions), then run channels 1-2 out of the 400 F via S/PDIF into the S/PDIF bank C in the 2408, and then channels 3-4 of the 400 F analog into the analog bank of 2408? I realize I would be 'double converting' these last 2 channels, first A/D on the Mackie and then A/D again on the MOTU. Any correction or insight is highly appreciated with audio routing.
Sync Issues:
The 2408 mk3 provides many sync options, including WORD CLOCK OUT/IN. The Mackie 400 F also has WORD OUT/IN. The 800 R has WORD IN and a termination button. I know I probably need to eventually buy a Big Ben, but is it worth it to use Word Clock with the devices I have now? And if so, would the correct order be 2408 (master, set to 'Word Clock out' in the clock options of the audio control panel) -> into 400 F (set to external WC) -> into 800 R (set to external WC, then terminated)? Or does the lightpipe and S/PDIF take care of sync on each bank without the need for a master Word Clock. What would the setting be for the 2408 in any case?
Again, thanks so much for any help with this, I really appreciate it. This is my first post after much reading of this forum.
Dual 2.0 G5 Mac OS X (10.4) 3 gigs RAM, Logic Pro 7.1.1

f stands for float. If you create a number literal 0.5, it defaults to be a double. You put a f (or F works too, I think) after it to indicate you mean it to be a float. The same thing happens for int/long. 2 is int 2, 2L is long 2. It's also similar, although probably more efficient, to this: (float)0.5 or (long)2. It's just a function of the language, nothing to do with the Color class or any other class.

Please help with any or all: FTP, HTML, .Mac unpub'ing

Dear Helpers,
I too, build my site with iWeb and published to Mac, only to discover that the site was not "built in HTML" so I could not get help with SEO later on. (Then I read a Varrkgirl entry that seems to say that indeed once published, the site does contain HTML code. I am a novice and I don't "see" the code on my published pages..what do I know?) I was told "rebuild your site in HTML", transfer to new host via FTP.
Sooo, I had someone look at the site, put in the HTML code, and then he gave it to me on a disk which I can load onto my computer. I have been told to publish to a new host, via FTP Cyberduck (I see there's a tutorial for that here too) and unpublish my .Mac one. Don't know what in what order to do this.
I need help prioritzing tasks please. and to know if there is an easier way perhaps or if this should/could be avoided. Ultimately, I want a site in HTML code on my published site so that I can get some SEO help with later on. When I published to a folder, I do see code but if I simply upload this to another host would that take care of the whole issue? (i.e. dump the disk my person worked on, etc.)
re: HTML (could I have done this myself with Text Edit? If so, then is there a way to do so at this point, since my site is published to .Mac presently?) If I want to build/change current pages in the future using iWeb I want to know how, and then how to move changes to a new host.
re: Unpublishing my site at .Mac (when? it would seem like before I use FTP but if for some reason FTP'ing does not work then I am without my site, right?)
re:my laundry (really out of hand since beginnng this process of totally ignoring one's life for the web..)
Sincere thanks

HTML:
iWeb pages certainly ARE html code. You just don't edit the code in iWeb. If you need to add some code afterwards, try this:
http://www.varkgirl.com/Varkgirl/Basic%20HTML%20Additions.html
SEO:
http://www.varkgirl.com/Varkgirl/Google%20and%20iWeb.html
Basic iWeb FAQ:
http://www.varkgirl.com/iWebFAQ

TS1363 Itunes does not recognize my Samsung Focus S Smart phone made by Apple. I have tried everything. Please help with any suggestions! Thanks!

Please, can anybody help? I am using a Windows phone. It is a samsung Focus S Smartphone operating windows 7.5....My computer is running Windows XP. I can use Zune just fine but Itunes does not recognize my phone whatsoever! I cant get help from Apple as it is an older phone I guess

I google search the phone you have, its NOT an Apple phone but a Windows Phone. It cannot be used by itunes at all.
pucheebaby wrote:
My computer is running Windows XP. I can use Zune just fine
You can use Windows Media Player or other third-party software to upload stuff to your phone but you can't use itunes. sorry.
To anyone that wants to know the phone pucheebaby is using: http://www.att.com/shop/wireless/devices/samsung/focus-s-black.html?WT.srch=1&ca gpspn=pla [scroll down on link for more info.]
Message was edited by: keeferaf

Please help with Color info

Simple question, I hope.
In the string:
private Color purple = new Color(0.5f, 0.0f, 0.5f);
Where do I get the information on this in the docs? I want to know what the "f" stands for in the arguments to get a good understanding of this code. I searched through the color docs and could not find what I need to know. Can't find a reference to this. I thought I might not be looking in the correct area.
Thanks, .......daljaxon

f stands for float. If you create a number literal 0.5, it defaults to be a double. You put a f (or F works too, I think) after it to indicate you mean it to be a float. The same thing happens for int/long. 2 is int 2, 2L is long 2. It's also similar, although probably more efficient, to this: (float)0.5 or (long)2. It's just a function of the language, nothing to do with the Color class or any other class.

Please help with updated info how to Move iTunes 10.5.2 to a new MacBook Pro

With Christmas fast approaching, and new MAC computers being left under the tree, I would find it helpful for an update as to how best to move my son's iTunes library from my iMac (late 2011 version with Lion) which he is sharing to his new MacBook Pro (Early 2011 with Lion upgrade) . There is a lot of old information floating around on how to do this with prior versions of iTunes, but with iCloud and Apps now in the cloud I would like someone knowledgeable to update me and the community with the best way to do this for the latest versions of iTunes running on Lion. He also has his iPhone 4 synched with his account on my iMac and would like to deauthorize his iTunes on my iMac and have him sync on his new computer as well. I know it is probably hidden among the forums somewhere, but with a lot of people upgrading to new computers, it would be helpful for a refresher on this thread. Thanks!

Hi,
See Here for...
iTunes: How to move your music to a new computer
See here for Authorise...
Open iTunes
From the Store menu, choose Authorize This Computer. (In earlier versions of iTunes, access this option from the Advanced menu).
When prompted, enter your Apple ID and password, then click Authorize.
From Here
About authorization and deauthorization
Deauthorise...
Open itunes on the computer you want to deactivate. Make sure you are logged in. Under the "Store" menu, pull down top "deathorize this computer"

HT5824 I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. Please help with turning my iMessage completely off..

I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.

If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.

How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore. Please help with proper steps, if any.

How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
Please help with proper steps, if any.

Also see... these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141

Hi..............I Stuk up with a problem in JTree Please, help me any one..

Hi,
I created a JTree where the DefaultMutableTreeNode is created at run time and for this node, the leaf items are added dynamically.....Now my problem is, I should get a popup menu when i click on the treenode particularly-----
* Node1
-------Node11
-------Child1
In this I want a popup only for the Node11 & its child elements if there is any Node2 also i don't want a popup and also for Node1 i don't want, when I am trying this I am getting the Popup to all nodes and child elements, please, help me any one who cross over this problem.............
Thanks In Advance,
Regards,
Sarikakiran

Firstly, do you know how to detect the right click? (Use a MouseListener.)
When you receive the MouseEvent for the right-click, you can get the coordinates of the click (i.e. where on the JTree the mouse was clicked).
You can then use JTree.getPathForLocation to get the path for the clicked node, which is a TreePath object. Use TreePath.getLastPathComponent to find which node was actually clicked on.
Having determined which node was clicked, you can then make a decision about whether to show a popup menu.

Please Please help with JavaScript and Actions

Hello!
Is there a way to perform a saved Action from the Action Pallette using a JavaScript script? I know there is a way to do it with Visual Basic.
Is there a way to run a Visual Basic script from a JavaScript script?(which could be a potential workaround if JavaScript CANNOT call on an Action)
Is there a way to call on a JavaScript from an Action?
Here's specific information on my problem:
I am using Illustrator CS2 on a PC
I have written all of the JavaScript scripts that I need to perform various layer selection procedures and they all work perfectly. I have placed them in the Presets > Scripts folder so that they appear in my file menu.
I wrote a very long action that called on these scripts (using Insert Menu Item > then selecting the script by going File > Scripts) sequentially and did some selecting and copy-pasting and applying graphic styles in between scripts. The Action worked PERFECTLY and ran all the scripts I needed to an automated a process that usually takes me an hour in less than five minutes!
I saved the actions and saved the file.
After closing Illustrator all of the lines of the action that called on scripts disappeared! It seems this is a known bug...I currently know of no workaround.
Can anyone help with any of the following things:
1. Getting actions to SAVE the commands to run javascripts
2. Writing a JavaScript that runs an Illustrator Action
3. Writing a JavaScript that runs a Visual Basic script that runs an Illustrator Action.
I spent three days learning the basics of JavaScript (mostly by trial and error) and successfully wrote all the scripts I needed...I was overjoyed! But now that I've closed illustrator my actions to run said scripts do not work. PLEASE ADVISE!!!
Thanks in advance,
Matthew

try next
1)if possible split JS-code into 2 parts (before/after action)
2)make vbs script with contents
Set appRef = CreateObject("Illustrator.Application.3")
appRef.DoJavaScriptFile("C:\my1.js")
appRef.DoScript(Action As String, From As String)
'add wait while ActionIsRunning
appRef.DoJavaScriptFile("C:\my2.js")
3) run vbs (File > Scripts or double-click).

My phone 5 died and now it wont turn back on or seem to charge at all. I've tried several different charger cords and outlets. And all the phone will do is show the empty battery symbol. please help! Any suggestions are apprecaited!?! thanks

My phone 5 died and now it wont turn back on or seem to charge at all. I've tried several different charger cords and outlets. And all the phone will do is show the empty battery symbol. please help! Any suggestions are apprecaited!?! thanks

Hello Cooper,
Thank you for the details of the issue you are experiencing with your iPhone 5. I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

Please help with "You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported." I have seen other responses on this but am not a techie and would not know how to start with that solution.

Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreek

I am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline.

Please help with a new dual purpose PC build

Hi everybody in AdobeLand!
I've been reading various boards and hardware sites and have started piecing together a dual purpose computer system. It will be used for both video editing (of pre-shot hacked, high bitrate I-Frame Panasonic GH2 DSLR and camcorder footage using the AVCHD codec @ 1080p 24 and 30 fps) and webcasting/streaming purposes. I would build two computers for each task, but it's just not in the budget right now. I'm already stretching things as is.
I'm still not sure if I will be using Adobe Premiere or Sony Vegas Pro 12 yet, though it seems like they organize their folders and file structures about the same. Adobe's cloud service has me a bit scared off right now. This new scheme feels like they have their hand purpetually in your wallet, which does not sit well with me. I may still go with Vegas 12 just to avoid that hassle right now. Help guide me here, experts! Telestream's Wirecast is being used for multi-cam switching and graphics for live and pre-recorded material being compressed and streamed.
Back on topic:
Here's the build as of right now...
OS: Windows 7 64-Bit Professional (Windows 8 absolutely sucks!)
CPU: Intel i7-4930k 6-Core Ivy Bridge (own)
Motherboard: Asus P9X79 Pro (own)
Memory: Crucial Ballistix 1.35v Sport DDR3L @ 32 GB (own)
GPU: EVGA GTX 770 FTW w/ 4 GB (will buy another HD monitor at a later date, hence the 4GB memory)
Case: Fractal Design XL R2 Full Tower
CPU Cooling: Noctua NH-D14 w/ SE2011 Bracket
PSU: Corsair RM1000 Quiet Series / 80 Plus Gold / 1000 Watts
Monitor: Dell U2412M Ultrasharp 24 inch / 1920x1200
Optical Drive: LG Blu-ray Writer
Keyboard: Microsoft 4000 Ergonomic
HDMI capture cards: Blackmagic Designs Decklink Mini (x2)
Storage:
I bought two Samsung 840 Pro SSD drives: one 128 GB and one 256 GB
Thinking about possibly 2 (maybe 3-4 if I really stretch) Seagate ST3000DM001 3TB HDD's.
I could sure use your help with any advise on arranging the storage to get the best bang vs. buck in speed and storage utilization (Wirecast can be setup to record live webcast sessions at 720p or 1080p in compressed files... probably no more than 120 minute webcasts... so that comes into play as well). Just don't have the funds for an uber-expensive RAID controller card right now.
Any opinions overall on the parts for the current build? I still have time to send back and exchange anything already purchased.
Thank you for your time and consideration.

What do you not understand from:
With all the reading and writing going on, on the boot disk, it is understandable you need a (number of) dedicated disk(s) for video editing, especially with the bandwidths required when the clip duration is short and the number of tracks exceeds one and uses a codec more complex than DV. The kind of files used during editing are, in order of their need for speed:
Media cache & Media cache database files, created on importing media into a project. They contain indexed, conformed audio and peak files for waveform display.
Typically small files, but lots of them, so in the end they still occupy lots of disk space.
Preview (rendered) files, created when the time-line is rendered for preview purposes, the red bar turned to green. Read all the time when previewing the time-line.
Project files, including project auto-save files, that are constantly being read and saved as auto-save files and written when saving your edits.
Media files, the original video material ingested from tape or card based cameras. Typically long files, only used for reading, since PR is a non-destructive editor.
Export files, created when the time-line is exported to its final delivery format. These files are typically only written once and often vary in size from several hundred KB to tens of GB.
When you are doubting which category of files to put on which kind of disk, especially when using both SSD's and HDD's, keep in mind that the speed advantage of SSD's over HDD's is most noteworthy with the Media cache & Media cache database. These files are frequently accessed, are small and there are many, so reducing latency and seek times and increasing transfer rates pays off by putting these on a SSD, rather than on a HDD, even if it is a raid0. Export files can go to the slowest volume on your system, since you only export once. To help you decide, I have added priority rank-numbers for speed, with 1 for the fastest volume and 5 for the least speed-demanding category.
and
Well, in the benchmark tests we have not seen any noticeable difference between SSD and HDD in terms of performance, but logic dictates that there should be a small difference in performance when the volume used for media cache is a SSD, because of the much faster access time and lower latency compared to a conventional disk. If it is noticeable, it is specifically on this volume with the media cache and media cache database, due to the large amount of small files that need to be accessed and written. This argument does not apply to the media volume with a limited number of files, that are very big in size.

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be ab

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.

Adobe - Lightroom : For Macintosh
Hal

[ETL]Could you please help with a problem accessing UML stereotype attributes ?

Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank you

Hi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana

Please help with any info

Similar Messages

Maybe you are looking for