Please help with Blackberry Curve 8320

Hi Everyone...
I am new to this forum and I am fascinated with my Blackberry and I just want to get it work to my standards...
1st. I have a 8gb MicroSDHC in the phone, I did format the card, but for some reason, the phone is only showing 3.3gb instead of 8gb... I am running on the latest Firmware which is 4.5 something...
2nd. I always get disconnected when I am using Windows Live Messenger... Is there any reason why? Does anyone know?
Please advice...
Thanks in advance... 

According to the list below your device has to support 8 Gb card.
below there is a list with card size limits for a partucal OS versions.
BlackBerry Device Software 4.2.0 -- Up to 2 GB
BlackBerry Device Software 4.2.1 -- Up to 4 GB
BlackBerry Device Software 4.2.2 -- Up to 4 GB
BlackBerry Device Software 4.3.0 -- Up to 8 GB
BlackBerry Device Software 4.5.0 -- Up to 8 GB
BlackBerry Device Software 4.5.0.81 and above -- Up to 16 GB
BlackBerry Device Software 4.6.0 -- Up to 16 GB
Go to Options-Advanced Options-Media card
Turn the "Mass storage mode support" to ON.
Save settings.
Connect your device to your computer via usb-cable. In "My computer" there is a new removable drive appear.
This new removable drive represents your sd-card from your device.
Format this removable drive with FAT32 filesystem on your desktop computer.
When you'll connect your device to computer later - make sure that device keyboard is unlocked.
And note that you cannot access files on sd-card from the device - while it is connected via USB-card to your computer. Disconnect the cable to access sd-card files from your device.

Similar Messages

  • HELP with BlackBerry Curve 8520, White screen after update to App World 2.0

    Hi, need an answer as soon as possible please.
    i downloaded the app world 2.0, after that i was told to restart. I didt, but, now i just have a White screen with the little clock on it... please... need an answer now, because my BB ys my world... Bussines, life, everything...
    Here is a pic of what I've mentioned...
    BlackBerry does not start anymore

    Same thing for me...I am using this post to try to solve:
    http://supportforums.blackberry.com/t5/BlackBerry-Curve-BlackBerry-8500/Curve-8520-stuck-on-a-quot-w...

  • Please help with Blackberry Pearl 8120

    I can't seem to get this phone to sync with my macbook. I have Mac OS X 10.5.1 and I just purchased my phone from t-mobile. I downloaded the Pocketmac and the driver update. I installed both according to the directions on another post (installing both and then restarting), but the syncing is still failing. What should I do? TIA for any help ya'll can give me. 
    I forgot to mention that each time I try to sync, I get an error message at the end that says "skipping." 
    Message Edited by kclassic225 on 07-15-2008 10:13 PM
     Ahhh!!! Now it's saying that my brand new media card has errors on it and to use a "disk error checking utility on a computer" to correct them. I don't even know what that means, but how can my card have errors??? I've only taken 2 pictures and not downloaded anything but this software!!!!! 
    Message Edited by kclassic225 on 07-15-2008 10:40 PM

    I went from the BB Pearl the iPhone.  I am using the Pearl again and am having the same issues I've always had with PocketMac.  It shows errors when trying to change settings and won't activate the sync button.  Then, it just syncs on its own and wipes my iCal and Address Book clean.  I've had to restore from Time Machine twice this week.  I am back to using Missing Sync.  Too bad they can't get this software to work consistently.

  • Help with BlackBerry Curve 8520

    I'm getting a recurring message that it's trying to connect elsewhere.  I don't want it to connect to anything but I can't stop the message from recurring

    manojjhaenglishtrainer wrote:
    Hi!
    Is there any way I can read e mail in Hindi language font on my BB curve 8520? If yes plz tell me the process .
    Thanks
    Hi there,
    Are you looking for Hindi fonts for your Curve 8520 having OS5 or you're looking for something else? Can you  clarify ?
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • How can I get Video Recording! on my Blackberry curve 8320 ???????????? HELP PLEASSEEEEE

    Hi, Im a bet stressed out i just got the blackberry Curve 8320 from Tmobile and realized it has no Video recording however the person that sold it to me says they downloaded a program like a converter or something and they used to have video recording on it.  Can you please tell me how i can get video recording on mine Please. Thank you.

    to use video you need an upgrade. The name is handheld device software OS. I believe you have 4.2. 4.5 is required.
    You have to wait for TMobile to release the 4.5 OS.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Blackberry Curve 8320 Smartphone - Recording Videos

    HELP!  I can't for the life of me figure out how to record a video with my Blackberry Curve 8320 Smartphone.  Thanks!

    I have may icons but not one for Video Camera.  I have one for Media and when I click on it there is an option for videos but can't figure out how to record from this location or perhaps this option is only for watching videos.  Thoughts/suggestions?  Also, how do I check software version?  Thanks SO much!

  • Our company provided a bunch of us with Blackberry Curve...

    Our company provided a bunch of us with Blackberry Curves... my unit was the only one without video capture capabilities. Is there an app I can download to add this?

    Hi there!
    There are a multitude of questions/answers to go through to help you out, but those won't work unless you come to the forums and register an account. Please come to:
    http://supportforums.blackberry.com/rim/
    and register an account. Then post to the applicable forum.
    Thanks!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Ical not syncing with Blackberry Curve when using iCloud

    I recently signed up to sync my contacts and iCal with iCloud. I manually sync my Contacts and iCal using hte BlackBerry DesktopSoftware. Since around the time I activated iCloud, I do not see any new events on my Blackberry Curve 8320. Contacts sync fine. Also, the BB DesktopSoftware shows a calendar that I had created on the MacBook using BusyCal but has since been deleted and no longer shows on iCal.
    I have spent hours with the BB Tech support (on Mac) and they have told me that it is a known issue with the Sync Server software on 10.7.4 when also using iCloud. They say this has been fixed in MacOS 10.8.
    Anyone else has seen this issue and is there any other solution without having to upgrade to 10.8? I am perfectly fine with NOT using iCloud if that is what I have to do. I just want the manual sync to BB to work with iCal.
    Is there a way to "reset" the Sync Server software to its original state?
    Any help/ideas would be appreciated.

    Since I don't have any definitive confirmation from Apple or BlackBerry on whether Mountain Lion will fix this or not, I simply deleted iCloud from my Mac and now everything syncs properly.

  • Blackberry Curve 8320 able to work in China?

    Hi everyone,
    I am totally new to the Blackberry world and have no idea if this question is ridiculously stupid, stupid, moderately intelligent or ground-breaking (I doubt the latter).  Anyway, I was wondering if it were possible for a Blackberry Curve 8320 to actually work in China?  I plan to buy one from the US and use it in China and also later in Aus.
    Any guidance would be greatly appreciated.
    Thanks in advance.
    Benjamin

    If you're using the GSM version of the blackberry you will be able to use it overseas. However, you will incur roaming charges and per message charges if I'm not mistaken. I have a supplier from Germany that travels to China and most of SE Asia a lot and he has no problems roaming. So long as the country you are going to has blackberry service (China does and so does Australia) you will be able to roam there. If you want to take advantage of cheaper local call rates, then you will need to unlock your phone so that you can insert a local SIM. Other thing to note is that some countries, I know here in Indonesia they do, have pre-paid blackberry service. I just don't know if that will work even with an unlocked phone because your PIN will still be locked to your service provider. Does anyone if the PIN can be easily transferred from one provider to another?

  • Help with blackberry I.d. on my phone

    Need help with blackberry id on 9860. I changed my email address and password online to reset it. Now I cannot access apps or update features as it just keeps locking me out. Not sure how to correct this or change it on my phone, I went to options, then device typed in the new info still nothing. Need some advice as it's been this way for a while not able to access apps etc or download. It's frustrating can someone advice please. T  Thank you

    Hi jspooner
    Welcome to BlackBerry Support Forums
    Why did you Change your Username or email and password , are you having any issue with it ? Did you upadate your email in BlackBerry ID website ?
    If you still remember your old BlackBerry ID and password then try this Knowledge Base to Change or Update your BlackBerry ID username :
    KB28060 : How to change or update a BlackBerry ID username on the BlackBerry ID website
    Try it and let us know if you recieve the same error or any error message.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • HT5824 I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. Please help with turning my iMessage completely off..

    I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.

    If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it.  Also, try changing the password associated with the Apple ID that you were using for iMessage.

  • How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore. Please help with proper steps, if any.

    How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
    On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
    Please help with proper steps, if any.

    Also see... these 2 Links...
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141

  • Please help with "You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported." I have seen other responses on this but am not a techie and would not know how to start with that solution.

    Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
    I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
    Please help with what I need to type, how, where, etc.
    Many thanks
    AppleSueIn HunterCreek

    I am afraid there is no solution.
    PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
    You could contact the developers to see if they have an updated version in the pipeline.

  • Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be ab

    Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.

    Adobe - Lightroom : For Macintosh
    Hal

  • [ETL]Could you please help with a problem accessing UML stereotype attributes ?

    Hi all,
    Could you please help with a problem accessing UML stereotype attributes and their values ?
    Here is the description :
    -I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
    -Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
    -Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
    s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
    -However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
    Please help
    Thank you

    Hi Dimitris,
    Thank you , a minimal example is provided now.
    Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
    Instructions for reproducing the problem :
    1-Run the uml2etl.etl transformation with the supplied launch configuration.
    2-Open lqn.model.
    There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
    The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
    Thank you
    Mana

Maybe you are looking for