Please help with bypassing bootup selection screen. MB:MSI Z68A-GD80
Hi Guys,
I was wondering if you could help me bypass the boot-up selection choices screen and go directly into Windows.
My MB is MSI Z68A-GD80. I want to remote control this pc, but with the selection boot option screen keeps coming up after rebooting, it might not work.
Is there a setting somewhere to disable this and go directly to Windows? I tried different setting in the Setting menu, but not working.
Thanks in advance!
Rich
Enter BIOS 'Settings', 'Boot', enter (red arrow) UEFI & disable, enter & either leave alone or disable as to preference (blue arrow), USB HardDisk set as desired, etc. Then, in the 'Boot Option Priorities' (white arrow pointing at 1 thru 8 boot list in this example), start at the bottom & disable as you go upward until you have only set for #2 as example, CD/DVD drive, & for #1 boot device, your OS HDD. Hit the 'F10' key & the 'Enter' key & it should be set correctly to what you want.
Similar Messages
-
i want to replace my front screen of 4S. Please help me to identify original screen with fakes?
Apple does not sell parts.
Either get the entire device replaced under Out of Warranty exchange or take your chances with non-oem parts. -
hello please help me my MacBook Pro screen when desktop switching fingers pressing 3 distorts a bit, with him?
First, remove Comodo. You don't need it, and it sounds like it is causing a problem.
The other symptoms sound like you have adware installed. Comodo might have detected some components of that adware, or it might not have, but whatever the case, you should NEVER allow any anti-virus software to quarantine or delete files from your computer. See: How to remove infected files.
Regarding the adware, see my Adware Removal Guide.
(Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.) -
hi, when i am listening music and the screen goes to sleep my music stop playing.Please help with settings
No problem. And no worries, several people have made this same mistake!
Either way enjoy the iPod!
Brock -
How to save varaint in a report program with tabstrip in selection-screen
Hi Gurus,
We have a custom report program and selection screen of this program has a tabstrip of 9 tabs. This program will run in background job and we are facing problem to save variant for this report program.
We saved one variant with 'TAB2' populated. But when we execute the report and select that variant and we are not navigated to 'TAB2' automatically. So, code for TAB2 is not triggerd and we are not getting desired output.
When we set this program with variant in Job, program is not navigated to 'TAB2' as per variant setup.
Is there any way to save variant for this kind of report ?
Please help with your suggestions
Thanks & Regards
ChandanThanks for your help.
I found during debugging that it is holding the sy-ucomm of the first tab as default value. So, I declared a new field in selection screen with No-Display option. When user will select a tab, this new field will hold the value of that sy-ucomm. As this field is in selection screen, it is getting stored in variant also.
In start-of-selection of program I am checking this field value and accordingly set the TABSTRIP.
Thanks again for your help.....
Regards,
Chandan -
Including User selection criteria along with LDB standard selection screen
Hi
While creating a HR report, along with the standard selection screen, if the cusomer requires some more fields to be added, How to retrive the data from the DB?
Is it the way to retrive the data based on Standard selection criteria from the LDB and then filter it based on user criteria or any other way?
Please help me out in this regard.
Thank you.Yes thats the way. You get the data based on Selection screen of LDB (You can select Report Catogory you wish to) once you get data, You can put CHECK statement to see the data against PXXXX type to the filter value from you custom field on selection screen.
-
How to define f4 help for parameters in selection screen.
Hi Folks,
I have declared parametrs of type RLGRAP-FILENAME and i want to select the path for the application server file by pressing f4 during run time , not like typing the path in the field input. Pls help me how to do that.
Thanks in advance.
Regards
RajeshHai Rajesh
DATA: I_FILETABLE TYPE FILETABLE,
V_RC TYPE I.
PARAMETERS: P_FILE LIKE RLGRAP-FILENAME. "local file with contracts
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Find File'
DEFAULT_EXTENSION = 'C:\'
DEFAULT_FILENAME = ''
FILE_FILTER = ',..'
INITIAL_DIRECTORY =
MULTISELECTION =
WITH_ENCODING =
CHANGING
FILE_TABLE = I_FILETABLE
RC = V_RC
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
others = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE I_FILETABLE INTO P_FILE INDEX 1.
Thanks & regards
Sreenivasulu P -
Please help with slideshow problems!
Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing. Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened". How can I save a
slideshow inprogress and be able to reopen and continue to edit and make slideshow? I want to thank anyone who can help me with this in advance as I
have gotten so frustrated that I want to just scream.
ThanksThanks for the help, thought I had done so but maybe not. Anyway will have another go at it, now may I ask another
question? I am trying to add audio to slideshow. I have some music I purchased thru amazon as mp3 files but I get
message no codec and when I try to add wmv I get same message. What type of file do I need and how can I add
multiple songs to one slideshow. I have one little wmv file that will go in, but it just replicates itself multiple times until
it fills slide show.
Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
Date: Sun, 26 Dec 2010 20:34:32 -0700
From: [email protected]
To: [email protected]
Subject: Please help with slideshow problems!
You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
Now you are most probably using only the Output command: that is what makes the wmv file.
You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
-- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
-- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
-- The 1st entry on that Shortcuts bar is "Save Project"
It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing. Save each Project with a unique name.
After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
Note: you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
> -
I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.
If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.
-
How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
Please help with proper steps, if any.Also see... these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141 -
Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreekI am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline. -
Problem with user defined selection-screens
Hi,
in my case, i have a default selection screen and a user defined selection screen. Now, after selecting a radio button in default selection screen, the user defined selection screen is called. after executing it report output is displayed. now if i press f3 (back) it is going to default selection screen. here my requirement is, when i press f3 it should go to the user defined selection.
Can u plz help me solve this.
bye n regards
sreeAny modifications to screen 1000 will be lost the next time the program is generated.
When the user hits the back key from the report output, your ABAP is restarted just like when you originally started it. That is why you are getting the default selection screen again.
Use the AT USER-COMMAND event. When BACK is hit from the report, use the SUBMIT command to re-execute the program, passing it the selections from the default selection screen. Leave out the RETURN option.
For help on filling the selection screen during SUBMIT, help is available at
http://help.sap.com/saphelp_470/helpdata/en/9f/dba51a35c111d1829f0000e829fbfe/frameset.htm -
Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.
Adobe - Lightroom : For Macintosh
Hal -
[ETL]Could you please help with a problem accessing UML stereotype attributes ?
Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank youHi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana -
Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs
Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
Thanks,
Hussein
Maybe you are looking for
-
HT4972 How do I back up my music, apps, & books so I can update to 5.1.1 ?
How do I back up my Music, apps, and Books, so I can update to 5.1.1 ?
-
Specific Image Hangs PhotoShop
I have discovered an image that causes Photoshop to hang on "Save for Web and Devices". I need to Forced Quit to continue. A friend has tried it on CS2 (Powerbook G4) and I have CS3 (MacBook Pro 13in latest) with the same results. I can modify the
-
Black background in youtube firefox only
So this just came out of no where today. A random part of the background on YouTube is now black. As show in the image. http://i62.tinypic.com/m7reie.jpg This only happens with Firefox and even in safe mode. I tried chrome and i do not get the black
-
Problems Sharing Contacts with iCloud
My wife and I each have an iPhone and and an iCloud account. However, all our contacts are on my Mac (my Apple ID). I have created a new account in my address book for my wife's iCloud which has successfully shared the Calander but it hasn't worked
-
How do i download my books from kobo to my aluratek ereader through adobe digital editions
I am trying to download my books from kobo to my aluratek ereader through Adobe Digital Editions..... how is this done.... i've tried and have not been successful