Please help with flascomm server plan
Hello
I need to broadcast with flashcomm an event for about 150-200
users (I get
the signal from a TV tuner and I send it to Flashcomm
server). Currently I'm
using Uvault (www.uvault.com) servers but I don't get the
results I'd like.
The problem is uvalt gives me up to 5 Mbs of peak bandwidth
(I have hired
Flash Media Server Plan 4) and I need a real-time streaming
of the signal,
so I'd like to be advised what should I do to get real-time
streaming.
Should I hire a Flash Video Plan to Uvault (I really don't
know how does it
work) or shuold I hire a plan with any other company. Could
you tell me
about other companys that can offer me a higher bandwidth to
get the real
time streaming I need?
Thank you everybody
If you are talking about their shared Flash Media Server plan
then that
could be the problem: it is shared and you are subject to the
server dealing
with other users and demand peaks. Perhaps looking at a
dedicated plan is
the way to go.
You might look over the hosting list at
http://flashcomguru.com/articles/hosts.cfm
Lon Hosford
www.lonhosford.com
Flash, Actionscript and Flash Media Server examples:
http://flashexamples.hosfordusa.com
May many happy bits flow your way!
"Dpto. Programaci�n Prodigia Consultores"
<[email protected]> wrote
in message news:e6piae$ce0$[email protected]..
> Hello
>
> I need to broadcast with flashcomm an event for about
150-200 users (I
> get the signal from a TV tuner and I send it to
Flashcomm server).
> Currently I'm using Uvault (www.uvault.com) servers but
I don't get the
> results I'd like. The problem is uvalt gives me up to 5
Mbs of peak
> bandwidth (I have hired Flash Media Server Plan 4) and I
need a real-time
> streaming of the signal, so I'd like to be advised what
should I do to get
> real-time streaming. Should I hire a Flash Video Plan to
Uvault (I really
> don't know how does it work) or shuold I hire a plan
with any other
> company. Could you tell me about other companys that can
offer me a higher
> bandwidth to get the real time streaming I need?
>
> Thank you everybody
>
Similar Messages
-
Please help with Forms server and forms
Hi, all
I am new to oracle.
Mine is home PC and the spec. of the system are as follows.
database:Oracle 8i EE
Forms :6i
OS :Windows 2000
Yesterday I downloaded Oracle9iAS Server and followed the documentation in installing.
As per the documentation, I accepted default values in many cases and went thru with installation.
At the end of the installation, i got the following config(found at the bottom of the message).
Please give me steps in resolving the issues below.
Also,
when I run the "Run form from web" from Programs....
what if the web listener port is taken. how do we figure out if one is already in use and if so what are other ports available to me.
and finally in the same app. is "Web Host" the name of my computer on which I installed the Oracle server?
TIA
Shankar
Configuration Steps for Oracle Forms installation of 00:44:38 2002/05/01
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory C:\shankar\6iForms\F6i\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server-6Web] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory C:\shankar\6iForms\F6i\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory C:\shankar\6iForms\F6i\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory C:\shankar\6iForms\F6i\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory C:\shankar\6iForms\F6i\JINIT.Thanks, Vikas!
But I did a search for 6iServer.conf and did NOT locate any such file
Please help
TIA
SHANKAR
Shankar,
It would have helped if you had indicated what is the full version of 9iAS that you have installed. By default the portnumber that is used is 7778.
As per the entries, they should have already been made in the config files. But check that the 6iServer.Conf file and it should contain the entries that you are being told to update. If not, then add the entries in the 6iServer.conf file and that is all you need.
HTH.
Vikash -
Please help with mail server choice and setup
Hello dear arch users, for begining i`ll start with litle intro what i know, and what i dont understand, so it would be easyer to help solve my problem, thanks for reading this.
I've been using arch for some time (few months) but i still dont know very much about it..
I have successfully installed lighttpd+php (fcgi)+mysql+phpmyadmin, ssh and mc allso of cource, serveral times, so i know how to solve little problems
I need everything lightweight because my arch's box is not so fresh as i could want
p2 350mhz CPU
192mb of RAM
8Gb HDD
10Mbit internet connection
whole project is for personal use only, and it will not even reach 10 user limit (me and some friends are using this..)
Now i`m willing to install mail server with some webmail ( i dont like outlook express thunderbird and other clients, only web acces)
I have googled for tutorials for 2 days now, just looking for best thing for newbie like me, with little knowlage of linux.
SquirrelMail or RoundCube wich one is bether ? I like RoundCube because it has nicer web design, but is it bether that SquirrelMail ?
Postfix and Dovecot are they enough good, or is there anything bether ?
Spamassasin and Graylistening will this work, or i`ll need something stronger?
Did i miss anything ?
I just want to say thanks for reading this, and helping me out. Thanks!
ps will this be good enough tutorial to follow ? http://www.hypexr.org/linux_mail_server.php
Karlis.
Last edited by karlis (2010-01-10 13:49:14)Hi, thanks for response
SSL certificate is generated ... ok so it wont be so hard to help here are my configs
main.cf
# Paths
queue_directory = /var/spool/postfix
command_directory = /usr/sbin
daemon_directory = /usr/lib/postfix
mail_owner = postfix
# Domain settings
myhostname = <mydomain>
myorigin = <mydomain>
mydestination = $myhostname, localhost.$mydomain, localhost
# SMTP settings
smtpd_tls_cert_file=/etc/ssl/certs/mail.crt
smtpd_tls_key_file=/etc/ssl/private/mail.key
smtpd_use_tls=yes
smtpd_tls_session_cache_database = btree:/var/lib/postfix/smtpd_scache
smtp_tls_session_cache_database = btree:/var/lib/postfix/smtp_scache
smtpd_tls_loglevel = 1
smtpd_sasl_auth_enable = yes
smtp_sasl_auth_enable = yes
smtpd_recipient_restrictions = permit_sasl_authenticated,
permit_mynetworks,
reject_unauth_destination,
check_policy_service inet:127.0.0.1:10030
smtpd_sender_restrictions = permit_sasl_authenticated, permit_mynetworks
smtpd_sasl_security_options = noanonymous
# SASL
smtpd_sasl_type = dovecot
smtpd_sasl_path = /var/run/dovecot/auth-client
# Email and mailbox settings
alias_maps = hash:/etc/postfix/aliases
alias_database = $alias_maps
home_mailbox = Maildir/
virtual_alias_domains = <mydomain>
virtual_alias_maps = hash:/etc/postfix/virtual
mailbox_size_limit = 0
dovecot.conf
protocols = imap imaps
disable_plaintext_auth = yes
log_timestamp = "%b %d %H:%M:%S "
ssl = yes
ssl_cert_file = /etc/ssl/certs/mail.crt
ssl_key_file = /etc/ssl/private/mail.key
mail_access_groups = mail
mechanisms = plain login
socket listen {
client {
path = /var/run/dovecot/auth-client
mode = 0660
user = postfix
group = postfix
here are some of my config uncommented part, if its nececery i can zip and upload bouth configs to be 100% clear wheres the problem..
Karlis
Last edited by karlis (2010-01-13 18:02:23) -
Please help with a server error
Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
<!-- Web.Config Configuration File --> <configuration> <system.web> <customErrors mode="Off"/> </system.web> </configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
<!-- Web.Config Configuration File --> <configuration> <system.web> <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/> </system.web> </configuration>Hello,
So, tell us more... what services are you sharing, is this a NetBoot? Admin account? What App is reporting this?
Open Console in Utilities & see if there are any clues or repeating messages when this happens. -
Please help with better sql plan - full test case
Hello,
here is my test case:
SQL> create table ib_auth_devices(dv_id number(12) primary key , dv_cl_id number(12));
Table created.
SQL> create table ib_clients (cl_id number(12) primary key);
Table created.
SQL> alter table ib_auth_devices add constraint fk1 foreign key(dv_cl_id) references ib_clients(cl_id);
Table altered.
SQL> create table ib_tokens (to_dv_id number(12) primary key);
Table created.
SQL> alter table ib_tokens add constraint to_dv_id foreign key(to_dv_id) references ib_auth_devices(dv_id);
Table altered.
SQL> create table ib_auth_cards(au_dv_id number(12) primary key);
Table created.
SQL> alter table ib_auth_cards add constraint au_dv_id foreign key(au_dv_id) references ib_auth_devices(dv_id);
Table altered.
SQL> insert into ib_clients values(1);
1 row created.
SQL> insert into ib_clients values(2);
1 row created.
SQL> insert into ib_clients values(3);
1 row created.
SQL> insert into ib_clients values(4);
1 row created.
SQL> insert into ib_clients values(5);
1 row created.
SQL> commit;
Commit complete.
SQL> insert into ib_auth_devices values(1 , 1);
1 row created.
SQL> insert into ib_auth_devices values(2 , 2);
1 row created.
SQL> insert into ib_auth_devices values(3,3);
1 row created.
SQL> insert into ib_auth_devices values(4,4);
1 row created.
SQL> commit;
Commit complete.
SQL> insert into ib_tokens values(1);
1 row created.
SQL> insert into ib_tokens values(2);
1 row created.
SQL> insert into ib_tokens values(3);
1 row created.
SQL> insert into ib_auth_cards values(1);
1 row created.
SQL> insert into ib_auth_cards values(2);
1 row created.
SQL> commit;
Commit complete.
SQL> select cl_id from ib_clients;
CL_ID
1
2
3
4
5
SQL> select cl_id from ib_clients cli , ib_auth_devices ad
2 where
3 cli.cl_id = ad.dv_cl_id;
CL_ID
1
2
3
4
SQL> select * from ib_tokens;
TO_DV_ID
1
2
3
SQL> select * from ib_auth_cards;
AU_DV_ID
1
2
SQL> select * from ib_clients;
CL_ID
1
2
3
4
5
SQL> select * from ib_auth_devices;
DV_ID DV_CL_ID
1 1
2 2
3 3
4 4
SQL> exec dbms_stats.gather_table_stats(user , 'IB_AUTH_DEVICES' , cascade => true);
PL/SQL procedure successfully completed.
SQL> exec dbms_stats.gather_table_stats(user , 'IB_TOKENS' , cascade => true);
PL/SQL procedure successfully completed.
SQL> exec dbms_stats.gather_table_stats(user , 'IB_CLIENTS' , cascade => true);
PL/SQL procedure successfully completed.
SQL> exec dbms_stats.gather_table_stats(user , 'IB_AUTH_CARDS' , cascade => true);
PL/SQL procedure successfully completed.
SQL> l
1 select cli.cl_id from ib_clients cli , ib_auth_devices ad,
2 (select dv_cl_id as cl_id
3 from ib_auth_cards, ib_auth_devices
4 where
5 au_dv_id = dv_id
6 ) cards,
7 ( select dv_cl_id as cl_id
8 from ib_tokens, ib_auth_devices
9 where
10 to_dv_id = dv_id
11 ) tokens
12 where
13 cli.cl_id = ad.dv_cl_id
14 and cards.cl_id(+)= cli.cl_id
15 and cards.cl_id is null
16 and tokens.cl_id(+)= cli.cl_id
17* and tokens.cl_id is null
SQL> r
1 select cli.cl_id from ib_clients cli , ib_auth_devices ad,
2 (select dv_cl_id as cl_id
3 from ib_auth_cards, ib_auth_devices
4 where
5 au_dv_id = dv_id
6 ) cards,
7 ( select dv_cl_id as cl_id
8 from ib_tokens, ib_auth_devices
9 where
10 to_dv_id = dv_id
11 ) tokens
12 where
13 cli.cl_id = ad.dv_cl_id
14 and cards.cl_id(+)= cli.cl_id
15 and cards.cl_id is null
16 and tokens.cl_id(+)= cli.cl_id
17* and tokens.cl_id is null
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=5 Card=4 Bytes=128)
1 0 FILTER
2 1 HASH JOIN (OUTER)
3 2 FILTER
4 3 HASH JOIN (OUTER)
5 4 NESTED LOOPS (Cost=1 Card=4 Bytes=24)
6 5 TABLE ACCESS (FULL) OF 'IB_AUTH_DEVICES' (Cost=1
Card=4 Bytes=12)
7 5 INDEX (UNIQUE SCAN) OF 'SYS_C008299' (UNIQUE)
8 4 VIEW (Cost=1 Card=2 Bytes=26)
9 8 NESTED LOOPS (Cost=1 Card=2 Bytes=18)
10 9 TABLE ACCESS (FULL) OF 'IB_AUTH_DEVICES' (Cost
=1 Card=4 Bytes=24)
11 9 INDEX (UNIQUE SCAN) OF 'SYS_C008303' (UNIQUE)
12 2 VIEW (Cost=1 Card=3 Bytes=39)
13 12 NESTED LOOPS (Cost=1 Card=3 Bytes=27)
14 13 TABLE ACCESS (FULL) OF 'IB_AUTH_DEVICES' (Cost=1 C
ard=4 Bytes=24)
15 13 INDEX (UNIQUE SCAN) OF 'SYS_C008301' (UNIQUE)
Statistics
0 recursive calls
12 db block gets
9 consistent gets
0 physical reads
0 redo size
364 bytes sent via SQL*Net to client
431 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
8 sorts (memory)
0 sorts (disk)
1 rows processedAny ideas about rewriting this query to achive better performance ?
Oracle version 8.1.7
Best Regards.
GrzegorzThe answer to this question totally depends on the real volumes you have in your tables. Your test case is probably not showing us these volumes.
However, I see some needless table accesses, so it's probably safe to conclude that this rewrite will speed something up:
SQL> create table ib_auth_devices(dv_id number(12) primary key , dv_cl_id number(12));
Tabel is aangemaakt.
SQL> create table ib_clients (cl_id number(12) primary key);
Tabel is aangemaakt.
SQL> alter table ib_auth_devices add constraint fk1 foreign key(dv_cl_id) references ib_clients(cl_id);
Tabel is gewijzigd.
SQL> create table ib_tokens (to_dv_id number(12) primary key);
Tabel is aangemaakt.
SQL> alter table ib_tokens add constraint to_dv_id foreign key(to_dv_id) references ib_auth_devices(dv_id);
Tabel is gewijzigd.
SQL> create table ib_auth_cards(au_dv_id number(12) primary key);
Tabel is aangemaakt.
SQL> alter table ib_auth_cards add constraint au_dv_id foreign key(au_dv_id) references ib_auth_devices(dv_id);
Tabel is gewijzigd.
SQL> insert into ib_clients values(1);
1 rij is aangemaakt.
SQL> insert into ib_clients values(2);
1 rij is aangemaakt.
SQL> insert into ib_clients values(3);
1 rij is aangemaakt.
SQL> insert into ib_clients values(4);
1 rij is aangemaakt.
SQL> insert into ib_clients values(5);
1 rij is aangemaakt.
SQL> insert into ib_auth_devices values(1 , 1);
1 rij is aangemaakt.
SQL> insert into ib_auth_devices values(2 , 2);
1 rij is aangemaakt.
SQL> insert into ib_auth_devices values(3,3);
1 rij is aangemaakt.
SQL> insert into ib_auth_devices values(4,4);
1 rij is aangemaakt.
SQL> insert into ib_tokens values(1);
1 rij is aangemaakt.
SQL> insert into ib_tokens values(2);
1 rij is aangemaakt.
SQL> insert into ib_tokens values(3);
1 rij is aangemaakt.
SQL> insert into ib_auth_cards values(1);
1 rij is aangemaakt.
SQL> insert into ib_auth_cards values(2);
1 rij is aangemaakt.
SQL> exec dbms_stats.gather_table_stats(user , 'IB_AUTH_DEVICES' , cascade => true);
PL/SQL-procedure is geslaagd.
SQL> exec dbms_stats.gather_table_stats(user , 'IB_TOKENS' , cascade => true);
PL/SQL-procedure is geslaagd.
SQL> exec dbms_stats.gather_table_stats(user , 'IB_CLIENTS' , cascade => true);
PL/SQL-procedure is geslaagd.
SQL> exec dbms_stats.gather_table_stats(user , 'IB_AUTH_CARDS' , cascade => true);
PL/SQL-procedure is geslaagd.
SQL> set autotrace on explain
SQL> select cli.cl_id
2 from ib_clients cli
3 , ib_auth_devices ad
4 , ( select dv_cl_id as cl_id
5 from ib_auth_cards
6 , ib_auth_devices
7 where au_dv_id = dv_id
8 ) cards
9 , ( select dv_cl_id as cl_id
10 from ib_tokens
11 , ib_auth_devices
12 where to_dv_id = dv_id
13 ) tokens
14 where cli.cl_id = ad.dv_cl_id
15 and cards.cl_id(+)= cli.cl_id
16 and cards.cl_id is null
17 and tokens.cl_id(+)= cli.cl_id
18 and tokens.cl_id is null
19 /
CL_ID
4
1 rij is geselecteerd.
Uitvoeringspan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=10 Card=4 Bytes=128)
1 0 FILTER
2 1 HASH JOIN (OUTER)
3 2 FILTER
4 3 HASH JOIN (OUTER)
5 4 NESTED LOOPS (Cost=4 Card=4 Bytes=24)
6 5 TABLE ACCESS (FULL) OF 'IB_AUTH_DEVICES' (Cost=3 Card=4 Bytes=12)
7 5 INDEX (UNIQUE SCAN) OF 'SYS_C001354381' (UNIQUE) (Cost=1 Card=1 Bytes=3)
8 4 VIEW (Cost=3 Card=2 Bytes=26)
9 8 NESTED LOOPS (Cost=3 Card=2 Bytes=18)
10 9 INDEX (FULL SCAN) OF 'SYS_C001354385' (UNIQUE) (Cost=2 Card=2 Bytes=6)
11 9 TABLE ACCESS (BY INDEX ROWID) OF 'IB_AUTH_DEVICES' (Cost=2 Card=1 Bytes=6)
12 11 INDEX (UNIQUE SCAN) OF 'SYS_C001354380' (UNIQUE) (Cost=1 Card=1)
13 2 VIEW (Cost=3 Card=3 Bytes=39)
14 13 NESTED LOOPS (Cost=3 Card=3 Bytes=27)
15 14 INDEX (FULL SCAN) OF 'SYS_C001354383' (UNIQUE) (Cost=2 Card=3 Bytes=9)
16 14 TABLE ACCESS (BY INDEX ROWID) OF 'IB_AUTH_DEVICES' (Cost=2 Card=1 Bytes=6)
17 16 INDEX (UNIQUE SCAN) OF 'SYS_C001354380' (UNIQUE) (Cost=1 Card=1)
SQL> select cli.cl_id
2 from ib_clients cli
3 , ib_auth_devices ad
4 where cli.cl_id = ad.dv_cl_id
5 and not exists
6 ( select 'dummy'
7 from ib_auth_cards
8 where au_dv_id = ad.dv_id
9 )
10 and not exists
11 ( select 'dummy'
12 from ib_tokens
13 where to_dv_id = ad.dv_id
14 )
15 /
CL_ID
4
1 rij is geselecteerd.
Uitvoeringspan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=8 Card=1 Bytes=9)
1 0 FILTER
2 1 NESTED LOOPS (Cost=4 Card=1 Bytes=9)
3 2 TABLE ACCESS (FULL) OF 'IB_AUTH_DEVICES' (Cost=3 Card=1 Bytes=6)
4 2 INDEX (UNIQUE SCAN) OF 'SYS_C001354381' (UNIQUE) (Cost=1 Card=1 Bytes=3)
5 1 INDEX (UNIQUE SCAN) OF 'SYS_C001354385' (UNIQUE) (Cost=1 Card=1 Bytes=3)
6 1 INDEX (UNIQUE SCAN) OF 'SYS_C001354383' (UNIQUE) (Cost=1 Card=1 Bytes=3)Regards,
Rob. -
cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?
If you mean updae server
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Otherwise what server are you talking about -
Help with a server - crashed after update -SOLVED
Hi everybody.
at the school where I study,. its the student who´ll take cake of the network, and now we have a really big problem...
After an pacman -Syu, (by an older student) one of the servers crashe. Its the only one that´s been updatet. Its run f.i. Apache , stunnel and up against an LDap server.
The problem is that the only way you can get into it, is in single user mode. At normal boot at the login-menu - we could type in the username and passwd, but the machine is too long to validate the passwd so it times out. thats also when you trying to lock in as root. And we cant start Apache(Even though we selv compiled it, and not did a pacman on that one.) But I´m not into arch that much yet, so hoefully someone can give me a hint about what went wrong during the updates..
But the worst part about that one is, that everything goes by that one, so we cant get in på using ssh.. But after 7 hours trying and studying the net - we didn´t get anywhere. and we don´t have a clue what to do ...
looking in the logfiles do not show anything unusual....
in normalboot at the login screen, after ca. 40sek. the message comes :
The server died unexpectet... thats it
So please help with this one - if anyone have a clue what went wrong..Heya,
have you tried using a knoppix-cd or another live-cd to have a look at the system or isn't that a possibility?
You can also login by adding the following kernelparameter: init=/bin/sh
However, I'm not sure how to mount the partitions then.
I'm guessing that the message "server died unexpectedly" is coming from a certain server-process (not the machine). Do you know which process and have you had a look at the logfiles (if there are any) of that process?
You can have a look at the output of the "dmesg"-command maybe if it is kernel-related (I think).
You say it isn't overridden. Are you sure? You can tell pacman to not override packages or certain files, but you have to mention it in the "/etc/pacman.conf"-file.
Hopes this helps you,
greetings,
Michel -
I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.
If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.
-
How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
Please help with proper steps, if any.Also see... these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141 -
Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreekI am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline. -
Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.
Adobe - Lightroom : For Macintosh
Hal -
[ETL]Could you please help with a problem accessing UML stereotype attributes ?
Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank youHi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana -
Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs
Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
Thanks,
Hussein -
Welcome.
At the outset, I'm sorry for my English
Please help with configuration Photoshop CS6 appearance.
How to disable the background of the program so you can see the desktop. (same menus and tools)
i wantto be the same effect as CS5.Please try turning off
Window > Application Frame -
Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work
You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
Regards.
Maybe you are looking for
-
Help me choose an external hard drive
I'm clueless on what external hard drive to buy. All I need it for is my music and pictures. I need one with a reasonable price for the storage and something that will last long.
-
Alright guys, I messed up! I was trying to get pages to permantly set the default language to Australian English, when I found that the pretty much the only way to do it is save a new blank template. (this is the normal blank template with the langua
-
Why do i get an error about '/var/ldap/ldap_client_file'
Why do some of my servers authenticating with LDAP have this error and others don't use /var/ldap/ldap_client_file at all? Unable to load new information from configuration file '/var/ldap/ldap_client_file' ('Configuration Error: No entry for 'NS_LDA
-
Dear SAP Experts, I have never worked on SAP ECC version 6 nor on 5. Could you please give your opinion,your experiences, your tips to the below: - Leading GAAP for Common Chart of Accounts - Handling Parallel GAAPs - Handling Parallel Ledgers -FICO
-
Are Laptop cases sold separately and if so, where?
My wife has broken the outside of her laptop so the plug won't stay in along with seperation of top and bottom. The computer works 100% so was hoping to find a 'For Parts" laptop of that model or wanting to see if the laptop case is sold separately