Please Help with Forms and SQL Plus Connection Issues in XE
I am not able to connect with the Forms Builder or SQL Plus with the following errors:
When attempting to connect with the supplied website.edu:port/orcl
ORA-06401: NETCMN: invalid driver designator
When leaving the connection information blank and using my local login and password
for my copy of Oracle XE
ORA-12560: TNS:protocol adapter error
Based on some reading, I set the TNS_ADMIN user environmental variable, trying each of the tnsnames.ora locations but I'm still receiving the same errors
Location 1: DevSuiteHome\...\tnsnames.ora
Location 2: oraclexe\...\tnsnames.ora
Thanks, Vikas!
But I did a search for 6iServer.conf and did NOT locate any such file
Please help
TIA
SHANKAR
Shankar,
It would have helped if you had indicated what is the full version of 9iAS that you have installed. By default the portnumber that is used is 7778.
As per the entries, they should have already been made in the config files. But check that the 6iServer.Conf file and it should contain the entries that you are being told to update. If not, then add the entries in the 6iServer.conf file and that is all you need.
HTH.
Vikash
Similar Messages
-
Please help with Forms server and forms
Hi, all
I am new to oracle.
Mine is home PC and the spec. of the system are as follows.
database:Oracle 8i EE
Forms :6i
OS :Windows 2000
Yesterday I downloaded Oracle9iAS Server and followed the documentation in installing.
As per the documentation, I accepted default values in many cases and went thru with installation.
At the end of the installation, i got the following config(found at the bottom of the message).
Please give me steps in resolving the issues below.
Also,
when I run the "Run form from web" from Programs....
what if the web listener port is taken. how do we figure out if one is already in use and if so what are other ports available to me.
and finally in the same app. is "Web Host" the name of my computer on which I installed the Oracle server?
TIA
Shankar
Configuration Steps for Oracle Forms installation of 00:44:38 2002/05/01
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory C:\shankar\6iForms\F6i\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server-6Web] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory C:\shankar\6iForms\F6i\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory C:\shankar\6iForms\F6i\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory C:\shankar\6iForms\F6i\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory C:\shankar\6iForms\F6i\JINIT.Thanks, Vikas!
But I did a search for 6iServer.conf and did NOT locate any such file
Please help
TIA
SHANKAR
Shankar,
It would have helped if you had indicated what is the full version of 9iAS that you have installed. By default the portnumber that is used is 7778.
As per the entries, they should have already been made in the config files. But check that the 6iServer.Conf file and it should contain the entries that you are being told to update. If not, then add the entries in the 6iServer.conf file and that is all you need.
HTH.
Vikash -
Please Help with ORA-01031 - try to connect as sysdba
The log of the error is as follows:
D:\oracle\product\10.1.0\Db_ra>set oracle_sid
Environment variable oracle_sid not defined
D:\oracle\product\10.1.0\Db_ra>set oracle_sid=ra
D:\oracle\product\10.1.0\Db_ra>connect "/ as sysdba"
'connect' is not recognized as an internal or external command,
operable program or batch file.
D:\oracle\product\10.1.0\Db_ra>sqlplus "/ as sysdba"
SQL*Plus: Release 9.0.1.4.0 - Production on Mon Aug 29 12:31:17 2005
(c) Copyright 2001 Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
Enter user-name: sys@ra as sysdba
Enter password:
Connected to an idle instance.
SQL> shutdown immediate;
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SQL> startup;
ORACLE instance started.
Total System Global Area 612368384 bytes
Fixed Size 790096 bytes
Variable Size 170127792 bytes
Database Buffers 440401920 bytes
Redo Buffers 1048576 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
I have been trying to work this out, but no success, Thanks in advance for your help.
JAsome part of the alert.log:
Instance terminated by USER, pid = 1212
ORA-1092 signalled during: ALTER DATABASE open ...
Dump file d:\oracle\product\10.1.0\admin\ra\bdump\alert_ra.log
Mon Aug 29 16:40:06 2005
ORACLE V10.1.0.2.0 - Production vsnsta=0
vsnsql=13 vsnxtr=3
Windows Server 2003 Version V5.2 Service Pack 1
CPU : 4 - type 586, 2 Physical Cores
Process Affinity: 0x00000000
Memory (A/P) : PH:3794M/4094M, PG:5823M/5973M, VA:1960M/2047M
Mon Aug 29 16:40:06 2005
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
KCCDEBUG_LEVEL = 0
Autotune of undo retention is turned on.
Dynamic strands is set to TRUE
Running with 2 shared and 18 private strand(s). Zero-copy redo is FALSE
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 10.1.0.2.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 159383552
__large_pool_size = 4194304
__java_pool_size = 4194304
sga_target = 612368384
control_files = D:\ORACLE\PRODUCT\10.1.0\RA\U02\ORADATA\RA\CONTROLFILE\O1_MF_1GHVSHLJ_.CTL, D:\ORACLE\PRODUCT\10.1.0\RA\U03\ORADATA\RA\CONTROLFILE\O1_MF_1GHVSHNZ_.CTL
db_block_size = 8192
__db_cache_size = 440401920
compatible = 10.1.0.2.0
log_archive_dest_1 = LOCATION=D:\oracle\product\10.1.0\ra\flash_recovery_area
log_archive_format = ARC%S_%R.%T
db_file_multiblock_read_count= 8
db_create_file_dest = D:\oracle\product\10.1.0\ra\u01\oradata
db_create_online_log_dest_1= D:\oracle\product\10.1.0\ra\u02\oradata
db_create_online_log_dest_2= D:\oracle\product\10.1.0\ra\u03\oradata
db_recovery_file_dest = D:\oracle\product\10.1.0\ra\flash_recovery_area
db_recovery_file_dest_size= 10485760000
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain = megatel.hn
dispatchers = (protocol=TCP)
shared_servers = 1
job_queue_processes = 10
background_dump_dest = D:\ORACLE\PRODUCT\10.1.0\ADMIN\RA\BDUMP
user_dump_dest = D:\ORACLE\PRODUCT\10.1.0\ADMIN\RA\UDUMP
core_dump_dest = D:\ORACLE\PRODUCT\10.1.0\ADMIN\RA\CDUMP
sort_area_size = 65536
db_name = ra
open_cursors = 300
pga_aggregate_target = 203423744
MMAN started with pid=3, OS id=1236
RECO started with pid=8, OS id=768
CJQ0 started with pid=9, OS id=1260
Mon Aug 29 16:40:08 2005
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
SMON started with pid=7, OS id=1256
CKPT started with pid=6, OS id=1252
Mon Aug 29 16:40:10 2005
alter database mount exclusive
PMON started with pid=2, OS id=1232
LGWR started with pid=5, OS id=1248
DBW0 started with pid=4, OS id=1244
Mon Aug 29 16:40:13 2005
Controlfile identified with block size 16384
Mon Aug 29 16:40:17 2005
Setting recovery target incarnation to 2
Mon Aug 29 16:40:17 2005
Successful mount of redo thread 1, with mount id 2665279661
Mon Aug 29 16:40:17 2005
Database mounted in Exclusive Mode.
Completed: alter database mount exclusive
Mon Aug 29 16:40:18 2005
alter database open
Mon Aug 29 16:40:18 2005
Beginning crash recovery of 1 threads
attempting to start a parallel recovery with 3 processes
parallel recovery started with 3 processes
Mon Aug 29 16:40:19 2005
Started first pass scan
Log resilvered from block #210 to block #212
Mon Aug 29 16:40:19 2005
Completed first pass scan
210 redo blocks read, 131 data blocks need recovery
Mon Aug 29 16:40:19 2005
Started redo application at
Thread 1: logseq 2213, block 3, scn 0.0
Recovery of Online Redo Log: Thread 1 Group 1 Seq 2213 Reading mem 0
Mem# 0 errs 0: D:\ORACLE\PRODUCT\10.1.0\RA\U02\ORADATA\RA\ONLINELOG\O1_MF_1_1GHVSJOX_.LOG
Mem# 1 errs 0: D:\ORACLE\PRODUCT\10.1.0\RA\U03\ORADATA\RA\ONLINELOG\O1_MF_1_1GHVSJW8_.LOG
Mon Aug 29 16:40:20 2005
Completed redo application
Mon Aug 29 16:40:20 2005
Completed crash recovery at
Thread 1: logseq 2213, block 213, scn 0.8340211
131 data blocks read, 131 data blocks written, 210 redo blocks read
Mon Aug 29 16:40:21 2005
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=15, OS id=2064
ARC0: Archival started
Mon Aug 29 16:40:21 2005
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=16, OS id=2076
ARC1: Archival started
Mon Aug 29 16:40:21 2005
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Mon Aug 29 16:40:21 2005
ARC1: Becoming the heartbeat ARCH
Mon Aug 29 16:40:21 2005
LGWR: Primary database is in CLUSTER CONSISTENT mode
Thread 1 advanced to log sequence 2214
Maximum redo generation record size = 120832 bytes
Maximum redo generation change vector size = 116476 bytes
Private_strands 7 at log switch
Thread 1 opened at log sequence 2214
Current log# 2 seq# 2214 mem# 0: D:\ORACLE\PRODUCT\10.1.0\RA\U02\ORADATA\RA\ONLINELOG\O1_MF_2_1GHVSK69_.LOG
Current log# 2 seq# 2214 mem# 1: D:\ORACLE\PRODUCT\10.1.0\RA\U03\ORADATA\RA\ONLINELOG\O1_MF_2_1GHVSKF3_.LOG
Successful open of redo thread 1
Mon Aug 29 16:40:21 2005
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Aug 29 16:40:21 2005
ARC0: Evaluating archive log 1 thread 1 sequence 2213
Mon Aug 29 16:40:21 2005
ARC1: Evaluating archive log 1 thread 1 sequence 2213
ARC1: Unable to archive log 1 thread 1 sequence 2213
Log actively being archived by another process
ARC1: Evaluating archive log 1 thread 1 sequence 2213
Mon Aug 29 16:40:22 2005
SMON: enabling cache recovery
Mon Aug 29 16:40:22 2005
ARC1: Unable to archive log 1 thread 1 sequence 2213
Log actively being archived by another process
ARC1: Evaluating archive log 1 thread 1 sequence 2213
ARC1: Unable to archive log 1 thread 1 sequence 2213
Log actively being archived by another process
Mon Aug 29 16:40:22 2005
Committing creation of archivelog 'D:\ORACLE\PRODUCT\10.1.0\RA\FLASH_RECOVERY_AREA\ARC02213_0564762704.001'
Mon Aug 29 16:40:23 2005
Successfully onlined Undo Tablespace 1.
Mon Aug 29 16:40:23 2005
SMON: enabling tx recovery
Mon Aug 29 16:40:23 2005
Database Characterset is WE8MSWIN1252
Mon Aug 29 16:40:23 2005
Published database character set on system events channel
Mon Aug 29 16:40:23 2005
All processes have switched to database character set
Mon Aug 29 16:40:25 2005
Starting background process QMNC
QMNC started with pid=17, OS id=2152
Mon Aug 29 16:40:27 2005
replication_dependency_tracking turned off (no async multimaster replication found)
Mon Aug 29 16:40:28 2005
Errors in file d:\oracle\product\10.1.0\admin\ra\udump\ra_ora_1304.trc:
ORA-00600: internal error code, arguments: [kksfbc-reparse-infinite-loop], [], [], [], [], [], [], []
Mon Aug 29 16:40:30 2005
Errors in file d:\oracle\product\10.1.0\admin\ra\udump\ra_ora_1304.trc:
ORA-00600: internal error code, arguments: [kksfbc-reparse-infinite-loop], [], [], [], [], [], [], []
Mon Aug 29 16:40:31 2005
Errors in file d:\oracle\product\10.1.0\admin\ra\udump\ra_ora_1304.trc:
ORA-00600: internal error code, arguments: [kksfbc-reparse-infinite-loop], [], [], [], [], [], [], []
Mon Aug 29 16:40:32 2005
Errors in file d:\oracle\product\10.1.0\admin\ra\udump\ra_ora_1304.trc:
ORA-00600: internal error code, arguments: [kksfbc-reparse-infinite-loop], [], [], [], [], [], [], []
Error 600 happened during db open, shutting down database
USER: terminating instance due to error 600
Mon Aug 29 16:40:33 2005
Errors in file d:\oracle\product\10.1.0\admin\ra\bdump\ra_mman_1236.trc:
ORA-00600: internal error code, arguments: [], [], [], [], [], [], [], []
Mon Aug 29 16:40:33 2005
Errors in file d:\oracle\product\10.1.0\admin\ra\bdump\ra_p002_1984.trc:
ORA-00600: internal error code, arguments: [15784], [600], [], [], [], [], [], []
ORA-00600: internal error code, arguments: [], [], [], [], [], [], [], []
Mon Aug 29 16:40:33 2005
Errors in file d:\oracle\product\10.1.0\admin\ra\bdump\ra_p001_1980.trc:
ORA-00600: internal error code, arguments: [15784], [600], [], [], [], [], [], []
ORA-00600: internal error code, arguments: [], [], [], [], [], [], [], []
Mon Aug 29 16:40:33 2005
Errors in file d:\oracle\product\10.1.0\admin\ra\bdump\ra_p000_1568.trc:
ORA-00600: internal error code, arguments: [15784], [600], [], [], [], [], [], []
ORA-00600: internal error code, arguments: [], [], [], [], [], [], [], []
Mon Aug 29 16:40:33 2005
Errors in file d:\oracle\product\10.1.0\admin\ra\bdump\ra_reco_768.trc:
ORA-00600: internal error code, arguments: [], [], [], [], [], [], [], []
Mon Aug 29 16:40:33 2005
Errors in file d:\oracle\product\10.1.0\admin\ra\bdump\ra_smon_1256.trc:
ORA-00600: internal error code, arguments: [], [], [], [], [], [], [], []
Mon Aug 29 16:40:33 2005
Errors in file d:\oracle\product\10.1.0\admin\ra\bdump\ra_ckpt_1252.trc:
ORA-00600: internal error code, arguments: [], [], [], [], [], [], [], []
Mon Aug 29 16:40:33 2005
Errors in file d:\oracle\product\10.1.0\admin\ra\bdump\ra_lgwr_1248.trc:
ORA-00600: internal error code, arguments: [], [], [], [], [], [], [], []
Mon Aug 29 16:40:34 2005
Errors in file d:\oracle\product\10.1.0\admin\ra\bdump\ra_dbw0_1244.trc:
ORA-00600: internal error code, arguments: [], [], [], [], [], [], [], []
Instance terminated by USER, pid = 1304
ORA-1092 signalled during: alter database open... -
Please help with jsp and database!!
Hello,
i first created a jsp page and printed out the parameters of a user's username when they logged in. example, "Welcome user" and it worked fine...
i inserted a database into my site that validates the username and password, and ever since i did that in dreamweaver, when a user logs in sucessfully, it returns the jsp page like its supposed to, only that it says "Welcome null" instead of "Welcome John." pretty strange, huh!? can anyone please help? thanks!
here is the important part of the code to Login.jsp, and LoginSuccess.jsp: <%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" %>
<%@ include file="Connections/Login.jsp" %>
<%
// *** Validate request to log in to this site.
String MM_LoginAction = request.getRequestURI();
if (request.getQueryString() != null && request.getQueryString().length() > 0) MM_LoginAction += "?" + request.getQueryString();
String MM_valUsername=request.getParameter("Username");
if (MM_valUsername != null) {
String MM_fldUserAuthorization="";
String MM_redirectLoginSuccess="LoginSuccess.jsp";
String MM_redirectLoginFailed="LoginFailure.jsp";
String MM_redirectLogin=MM_redirectLoginFailed;
Driver MM_driverUser = (Driver)Class.forName(MM_Login_DRIVER).newInstance();
Connection MM_connUser = DriverManager.getConnection(MM_Login_STRING,MM_Login_USERNAME,MM_Login_PASSWORD);
String MM_pSQL = "SELECT UserName, Password";
if (!MM_fldUserAuthorization.equals("")) MM_pSQL += "," + MM_fldUserAuthorization;
MM_pSQL += " FROM MemberInformation WHERE UserName=\'" + MM_valUsername.replace('\'', ' ') + "\' AND Password=\'" + request.getParameter("Password").toString().replace('\'', ' ') + "\'";
PreparedStatement MM_statementUser = MM_connUser.prepareStatement(MM_pSQL);
ResultSet MM_rsUser = MM_statementUser.executeQuery();
boolean MM_rsUser_isNotEmpty = MM_rsUser.next();
if (MM_rsUser_isNotEmpty) {
// username and password match - this is a valid user
session.putValue("MM_Username", MM_valUsername);
if (!MM_fldUserAuthorization.equals("")) {
session.putValue("MM_UserAuthorization", MM_rsUser.getString(MM_fldUserAuthorization).trim());
} else {
session.putValue("MM_UserAuthorization", "");
if ((request.getParameter("accessdenied") != null) && false) {
MM_redirectLoginSuccess = request.getParameter("accessdenied");
MM_redirectLogin=MM_redirectLoginSuccess;
MM_rsUser.close();
MM_connUser.close();
response.sendRedirect(response.encodeRedirectURL(MM_redirectLogin));
return;
%>
<form action="<%=MM_LoginAction%>" method="get" name="Login" id="Login">
<table width="55%" border="0">
<tr>
<td width="41%">Username </td>
<td width="59%"><input name="Username" type="text" id="Username" value="" size="25" maxlength="10"></td>
</tr>
<tr>
<td>Password </td>
<td><input name="Password" type="password" id="Password" value="" size="25" maxlength="10"></td>
</tr>
<tr>
<td> </td>
<td><input type="submit" name="Submit" value="Submit"></td>
</tr>
</table>
</form>And LoginSuccess.jsp where i want it to print out the "Welcome username
<%String Name=request.getParameter("Username");
out.println ("Welcome ");
out.println (Name); %><%@ page contentType="text/html; charset=iso-8859-1"
language="java" import="java.sql.*" %>
<%@ include file="Connections/Login.jsp" %>
<%
// *** Validate request to log in to this site.
String MM_LoginAction = request.getRequestURI();
if (request.getQueryString() != null &&
request.getQueryString().length() > 0) MM_LoginAction
+= "?" + request.getQueryString();
String
MM_valUsername=request.getParameter("Username");
if (MM_valUsername != null) {
String MM_fldUserAuthorization="";
String MM_redirectLoginSuccess="LoginSuccess.jsp";
String MM_redirectLoginFailed="LoginFailure.jsp";
String MM_redirectLogin=MM_redirectLoginFailed;
Driver MM_driverUser =
=
(Driver)Class.forName(MM_Login_DRIVER).newInstance();
Connection MM_connUser =
=
DriverManager.getConnection(MM_Login_STRING,MM_Login_US
RNAME,MM_Login_PASSWORD);
String MM_pSQL = "SELECT UserName, Password";
if (!MM_fldUserAuthorization.equals("")) MM_pSQL +=
= "," + MM_fldUserAuthorization;
MM_pSQL += " FROM MemberInformation WHERE
E UserName=\'" + MM_valUsername.replace('\'', ' ') +
"\' AND Password=\'" +
request.getParameter("Password").toString().replace('\'
, ' ') + "\'";
PreparedStatement MM_statementUser =
= MM_connUser.prepareStatement(MM_pSQL);
ResultSet MM_rsUser =
= MM_statementUser.executeQuery();
boolean MM_rsUser_isNotEmpty = MM_rsUser.next();
if (MM_rsUser_isNotEmpty) {
// username and password match - this is a valid
lid user
session.putValue("MM_Username", MM_valUsername);
if (!MM_fldUserAuthorization.equals("")) {
session.putValue("MM_UserAuthorization",
ion",
MM_rsUser.getString(MM_fldUserAuthorization).trim());
} else {
session.putValue("MM_UserAuthorization", "");
if ((request.getParameter("accessdenied") != null)
ll) && false) {
MM_redirectLoginSuccess =
ess = request.getParameter("accessdenied");
MM_redirectLogin=MM_redirectLoginSuccess;
MM_rsUser.close();
MM_connUser.close();
response.sendRedirect(response.encodeRedirectURL(MM_re
irectLogin));
return;
%>
<form action="<%=MM_LoginAction%>" method="get"
"get" name="Login" id="Login">
<table width="55%" border="0">
<tr>
<td width="41%">Username </td>
<td width="59%"><input name="Username"
="Username" type="text" id="Username" value=""
size="25" maxlength="10"></td>
</tr>
<tr>
<td>Password </td>
<td><input name="Password" type="password"
="password" id="Password" value="" size="25"
maxlength="10"></td>
</tr>
<tr>
<td>�</td>
<td><input type="submit" name="Submit"
me="Submit" value="Submit"></td>
</tr>
</table>
</form>
And LoginSuccess.jsp where i want it to print out the
"Welcome username
<%String Name=request.getParameter("Username");
out.println ("Welcome ");
out.println (Name); %>When the page is rediredted u r not passing the user name in the query string,so it is not availble in the query string for LoginSuccess page
Since u have added user in session user this
<%String Name=(String)session.getValue("MM_Username") ;%>
<% out.println ("Welcome ");
<% out.println (Name); %> -
Please help with workflow inspired SQL
Hi everyone, I need some help with a piece of sql I need to create. It will be used in a workflow scenario and is therefore a bit hairy and has some limitations. So here goes..
I have 2 current tables that will be used in this query. The first is a table used as a supervisor cross reference, and the second will be used for signing authority, or approval authorization. In short...the first table will give you the supervisor for the particular employee or employee in the where clause. This tells us who to route to. The second table has the operators authority level. As an example.... 1, 2, 3, or 4. A 1 could signify that this supervisor can approve for up to $5,000, and a 4 could signify that this person can approve up to $250,000. thats the basic idea.
So what I need to do in ONE statement is get the requestor's supervisor, and then check his/hers authority level for level 1, 2, 3 or 4. The authority level needed will be passed into the query, so I will have that as well as the requestor. And here is the hard part...... If no rows are returned (the supervisor does not have authority to approve) I need the query to apply the same logic to the next supervisor. In other words, the supervisor's supervisor. Every requestor will have a supervisor. Every supervisor will also have a supervisor....so it goes until we get to the CEO. So the query needs to keep going until it finds a row matching the signing authority.
So the limitations are......this needs to happen in one SQL query, and this query can only return ONE field!
Here are some creates and inserts to give you something to work with. Been suffering with this one for a few days so your help is GREATLY appreciated.
Supervisor cross reference table
CREATE TABLE PS_ROLEXLATOPR (ROLEUSER VARCHAR2(30) DEFAULT ' ' NOT
NULL,
DESCR VARCHAR2(30) DEFAULT ' ' NOT NULL,
OPRID VARCHAR2(30) DEFAULT ' ' NOT NULL,
EMAILID VARCHAR2(70) DEFAULT ' ' NOT NULL,
FORMID VARCHAR2(70) DEFAULT ' ' NOT NULL,
WORKLIST_USER_SW VARCHAR2(1) DEFAULT 'Y' NOT NULL,
EMAIL_USER_SW VARCHAR2(1) DEFAULT 'Y' NOT NULL,
FORMS_USER_SW VARCHAR2(1) DEFAULT 'Y' NOT NULL,
EMPLID VARCHAR2(11) DEFAULT ' ' NOT NULL,
ROLEUSER_ALT VARCHAR2(30) DEFAULT ' ' NOT NULL,
ROLEUSER_SUPR VARCHAR2(30) DEFAULT ' ' NOT NULL,
EFFDT_FROM DATE,
EFFDT_TO DATE) TABLESPACE PTTBL STORAGE (INITIAL 40000 NEXT 100000
MAXEXTENTS UNLIMITED PCTINCREASE 0) PCTFREE 10 PCTUSED 80
INSERT INTO PS_ROLEXLATOPR
DESCR,
OPRID ,
EMAILID ,
FORMID ,
WORKLIST_USER_SW ,
EMAIL_USER_SW ,
FORMS_USER_SW ,
EMPLID ,
ROLEUSER_ALT ,
ROLEUSER_SUPR ,
EFFDT_FROM
VALUES
DESCR,
'ABC123',
'XYZ123',
Signing Authority table..
CREATE TABLE PS_ZZ_WF_AUTHORITY (OPRID VARCHAR2(30) NOT NULL,
EMPLID VARCHAR2(11) NOT NULL,
EMAILID VARCHAR2(70) NOT NULL,
ZZ_SIGN_AUTHORITY VARCHAR2(1) NOT NULL) TABLESPACE APLARGE STORAGE
(INITIAL 40000 NEXT 100000 MAXEXTENTS UNLIMITED PCTINCREASE 0)
PCTFREE 10 PCTUSED 80
insert into PS_ZZ_WF_AUTHORITY
OPRID,
EMPLID,
EMAILID,
ZZ_SIGN_AUTHORITY
Values
'XYZ123',
'Any_Email',
'1'
)Hi,
Welcome to the forum!
Thanks for posting the CREATE TABLE and INSERT statements; that's very helpful!
Whenever you have a question, also post the results you want to get from the sample data your posted.
Always say what version of Oracle you're suing.
In the sample data you posted, I only see one row in each table. Does that really give a good picture of the problem? If the problem involves going up the chain of command 1, 2, 3 or more levels, then shouldn't you have a chain of at least 3 people to show the problem and test the results?
I think what you need is CONNECT BY Query , which works on a table with a parent-child relationship. Given a parent, you can find that ow's children, the children's children, their children, and so on, however many generations there are.
I don't think I can demonstrate this with your sample data, so I'll use the scott.emp table, whcih you should be able to query.
The emp table contains a hierarcy of employees, including this data:
NAME EMPNO MGR SAL JOB
KING 7839 5000 PRESIDENT
JONES 7566 7839 2975 MANAGER
SCOTT 7788 7566 3000 ANALYST
ADAMS 7876 7788 1100 CLERK
FORD 7902 7566 3000 ANALYST
SMITH 7369 7902 800 CLERK
BLAKE 7698 7839 2850 MANAGER
ALLEN 7499 7698 1600 SALESMAN
WARD 7521 7698 1250 SALESMAN
MARTIN 7654 7698 1250 SALESMAN
TURNER 7844 7698 1500 SALESMAN
JAMES 7900 7698 950 CLERK
CLARK 7782 7839 2450 MANAGER
MILLER 7934 7782 1300 CLERKThis show, among other things, that the employee with ename='KING' (empno=7839) has no boss.
JONES (empno=7566) does have a boss (mgr=7839), namely KING.
SCOTT (empno=7788) has a bos (mgr=7566), who is JONES.
I got the results above using this CONNECT BY query:
SELECT LPAD ( ' '
, 3 * (LEVEL - 1)
) || ename AS name
, empno
, mgr
, sal
, job
FROM scott.emp
START WITH mgr IS NULL
CONNECT BY mgr = PRIOR empno
;This is an example of a Top-Down Query , where we start with a parent, then find its children, grandchildren, and so on.
In your probelm, you want to do a Bottom-Up Query ; given a child, you want to see if its parent has a certain level of authority. If not, you need to look at that parent's parent, and keep going until to either reach someone with the right qualifications, or you reach the end of the chain of command.
That's similar to this problem: given a set of employees in scott.emp (say, everyone with job='CLERK') we want to find their closest ancestor who has a sal of 3000 or more. Look at the data above: you can see that SMITH is a CLERK, and SMITH'S boss, FORD, has sal=3000, so we want a row of output that shows SMITH and FORD.
For a different example, looks at MILLER. MILLER's boss, CLARK, only has sal=2450, so we need to look at CLARK's boss, KING.
One way to do that in a CONNECT BY query is:
SELECT CONNECT_BY_ROOT ename AS subordinate
, ename
, LEVEL - 1 AS steps_apart
FROM scott.emp
WHERE CONNECT_BY_ISLEAF = 1
START WITH job = 'CLERK'
CONNECT BY empno = PRIOR mgr
AND PRIOR sal < 3000
;Output:
SUBORDINAT ENAME STEPS_APART
SMITH FORD 1
ADAMS SCOTT 1
JAMES KING 2
MILLER KING 2You should be all set to write the query now.
Just kidding. I'll bet there's a lot of stuff in this message that's new to you. It's all documented in the SQL Language manual:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/index.htm
If you'd like help, post your version, a more complete set of sample data, and the results you want from that data.
Explain, with specific examples, how you get the results you posted from the data you posted.
Do as much of the query as you can, and post your code. -
Continuation-Please help with a complex sql query
Hi all,
Thanks a lot for your suggestions and inputs in the last thread of this post.
With the help of your suggested approach,i went ahead and was able to get some more data in the format as needed..I worked on gradually adding one table after another exactly as the data is required stepwise.But,still I am facing issues with displaying them.
there are many issues I am not able to do and would appreciate if you please have a look at my latest modified SELECT given below and help me writing it to get the display as needed.
Below,is the attempted query i tried out using your inputs.But,am stuck and need your help in writing it.
**Here,there is 1 ->MANY lines for the t_objective_id--->This has many learning_record_ids which i want to group by the unique objective_id.
Also,prior to that,there is a tplan_id---->which has MANY t_objective_id's
SELECT DECODE (LAG (firstname, 1, 0) OVER (ORDER BY firstname),
firstname, ' ',
firstname
) firstname,
DECODE (LAG (emplid, 1, 0) OVER (ORDER BY emplid),
emplid, ' ',
emplid
) emplid,
DECODE (LAG (tplan_name, 1, 0) OVER (ORDER BY tplan_name),
tplan_name, ' ',
tplan_name
) tplan_name,
tplan_id,
DECODE (LAG (activities, 1, 0) OVER (ORDER BY activities),
activities, ' ',
activities
) activities,
activities,
--activities,
DECODE (LAG (t_objective_id, 1, 0) OVER (ORDER BY t_objective_id),
t_objective_id, ' ',
t_objective_id
) t_objective_id,
completed_activities,required_credits,
DECODE (LAG (learning_record_id, 1, 0) OVER (ORDER BY learning_record_id),
learning_record_id, ' ',
learning_record_id
) learning_record_id,
catalog_item_name,catalog_item_type
FROM (SELECT test_cp.firstname, test_op.emplid, tp.tplan_name,tp.tplan_id,FN_TP_GET_CMPLTD_ACT_CNT(tp.tplan_id,test_lp.lp_person_id,'1862') activities,
test_tpo.t_objective_id,
( fn_tp_obj_comp_req_act_cdt (test_lp.lp_person_id,
tp.tplan_id,
test_tpo.t_objective_id,
tp.is_credit_based
+ fn_tp_obj_comp_opt_act_cdt (test_lp.lp_person_id,
tp.tplan_id,
test_tpo.t_objective_id,
tp.is_credit_based
) completed_activities,test_tpo.required_credits,lr.learning_record_id,lr.catalog_item_name,lr.catalog_item_type
FROM test_learning_plan test_lp,
test_training_plan tp,
test_person test_cp,
test_org_person test_op,test_tp_learning_activity test_tplplr,
test_tp_objective test_tpo,test_learning_record lr,test_train_obj_activity tpobjact
WHERE test_lp.lp_person_id = '1862188559'
AND test_cp.person_id = test_lp.lp_person_id
AND tp.tplan_id = 'tplan200811200632352287621599'
AND test_tpo.t_objective_id = tpobjact.t_objective_id
AND test_lp.LP_CATALOG_HIST_ID = tp.tplan_id
AND test_tplplr.tp_lp_lr_id =test_lp.learning_plan_id
AND test_tplplr.activity_lp_lr_id = lr.learning_record_id
AND lr.LR_CATALOG_HISTORY_ID = tpobjact.activity_id
AND test_op.o_person_id = test_cp.person_id
AND test_tpo.tplan_id = tp.tplan_id)
If we see the outer SELECT ---then one of the main issues is for EACH t_objective_id----->There are n learning_record_ids.
But,this select only shows 1 learning_record_id for each objective_id which is wrong.
Similarly,the data displayed isnot proper.
Below is the way I am getting the data now from the above SELECT.
Note:- FIRSTNAME is not correctly displayed.
FIRSTNAME EMPLID TPLAN_NAME TPLAN_ID ACTIVITIES ACTIVITIES_1
001 TP1 tplan1 5 5
TESTNAME tplan1 5
Continuation of the other columns of the same rows--**couldnt paste it properly so.
T_OBJECTIVE_ID COMPLETED_ACTIVITIES REQUIRED_CREDITS LEARNING_RECORD_ID CATALOG_ITEM_NAME CATALOG_ITEM_TYPE
obj1 1 5 lr1 C1 Course
obj2 4 4Something like this might solve your problem ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Elapsed: 00:00:00.00
satyaki>
satyaki>
satyaki>select * from emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7521 WARD SALESMAN 7698 22-FEB-81 226.88 500 30
7654 MARTIN SALESMAN 7698 28-SEP-81 1815 1400 30
7788 SCOTT ANALYST 7566 19-APR-87 598.95 20
7839 KING PRESIDENT 17-NOV-81 7260 10
7844 TURNER SALESMAN 7698 08-SEP-81 2178 0 30
7876 ADAMS CLERK 7788 23-MAY-87 159.72 20
7900 JAMES CLERK 7698 03-DEC-81 1379.4 30
7902 FORD ANALYST 7566 03-DEC-81 5270.76 20
7934 MILLER CLERK 7782 23-JAN-82 1887.6 10
7566 Smith Manager 7839 23-JAN-82 1848 0 10
7698 Glen Manager 7839 23-JAN-82 1848 0 10
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7599 BILLY ANALYST 7566 10-JUN-09 4500 30
12 rows selected.
Elapsed: 00:00:00.00
satyaki>
satyaki>
satyaki>
satyaki>
satyaki>select decode(lag(job,1,null) over(order by job),'CLERK','CK',
2 'SALESMAN', 'SM',
3 'ANALYST','AL',
4 'BO') res
5 from emp;
RE
BO
AL
AL
AL
CK
CK
CK
BO
BO
BO
SM
RE
SM
12 rows selected.
Elapsed: 00:00:00.01
satyaki>
satyaki>
satyaki>select MAX(decode(lag(job,1,null) over(order by job),'CLERK','CK',
2 'SALESMAN', 'SM',
3 'ANALYST','AL',
4 'BO')) res
5 from emp;
select MAX(decode(lag(job,1,null) over(order by job),'CLERK','CK',
ERROR at line 1:
ORA-30483: window functions are not allowed here
Elapsed: 00:00:00.01
satyaki>
satyaki>select MAX(res)
2 from (
3 select decode(lag(job,1,null) over(order by job),'CLERK','CK',
4 'SALESMAN', 'SM',
5 'ANALYST','AL',
6 'BO') res
7 from emp
8 );
MA
SM
Elapsed: 00:00:00.00
satyaki>
satyaki>Regards.
Satyaki De. -
I am working on Windows 2010 with Adobe Acrobat X Standard.
I created a fillable form for people to complete, save and e-mail to me but when some users send it back, I can not see the text unless I click in the field where they typed.
I try to print and it still does not show the text.
For other users, this does not happen.
Please help!! I am so frustratedTry the forum for Adobe Acrobat.
-
Please help with Firewall and/or other Settings to Chat (MSN Messenger).
I've tried to chat on all (I think) the messenger programs available for Mac that use a hotmail account or .net passport - Adium, Fire, Mercury (current) and MSN itself - and I have the same problem with all of them: I keep getting cut off/disconnected from MSN! No problems with Yahoo messenger or Yahoo ID (although it can be a bit slow sometimes), just with .net passport account.
I'm pretty sure it's got something to do with Firewall and/or related settings, but after months of trying to fix it, I'm about to give up... please help!
Currently the following Firewall ports are all open:
6891 – 6900
1863
80
1080
5060, 9000, 9010 (UDP – typed like that)
including:
Personal File Sharing
Windows Sharing
Remote Login - SSH
and Printer Sharing.
In my most recent disconnected conversation, Mercury logged a "socket fired exception" error.
I'm on a broadband/adsl connection, shared with hubby's pc through ethernet (and he never gets disconnected from msn, btw).
ANY suggestions would be welcome, but apart from the above, please tell me how/where to find what you tell me to look at or for, because I'm a new Mac user (six months), and on top of that I'm blonde
Many Thanks!
Mac Mini (PowerMac10,1) Mac OS X (10.4.3) 1.42 GHz PowerPC G4 with 1 GB DDR SDRAMUpdate:
Someone very kindly pointed out that my Firewall is actually Off (probably because I omitted to click on the Start button)... I did say I'm blonde
So now I'm really stumped... anybody got any ideas? Please? -
Please help with importing and using imovie and idvd
Hi,
Please forgive my lack of knowledge. I previously had a mini dv camcorder that was so easy to use with imovie hd. Now that I have switched to an HD Usb 2.0 camcorder that has built in 16gb memory and memory cards, I have had such a great deal of trouble. I really hope you can help and point me in the right directions.
Importing movies are fine, but they take so long! Currently, when I import a movie, I set the camcorder to PC mode and import through imovie. But the camcorder stays on, and I'm not sure if this is the best way or healthiest for the camcorder. Do you have a better/faster way to import movies? Is there a way to drag the video from the memory onto the computer, and then from there import the movie? I think at least I wouldn't have to leave the camcorder on.
Also, one major issue I have is that each movie is broken down into 100 or so clips. I coach basketball, and videotape the games. When there is stoppage, I pause the camcorder. I guess that creates so many clips, so that when the film is imported, there are over 100 clips for the entire movie. Is there a way of making that just 1 entire movie/clip?
Once I have imported the entire movie, which is 100+ clips, I want to simply create a dvd of the game. I know I have to share it, but do you have a better suggestion as to how I should handle this?
In the past, all I did was import the mini dv movie into imovie HD, share into idvd, and then that was it, dvd made. This process had become so time consuming.
Please help!Yes, I recognized there would be a slight pause between clips - but after all - you paused the camera at those points.
Putting them all in sequence in iMovie and then encoding in iDVD will take a lot of time.
An old favorite saying of mine is "not every job worth doing, is worth doing well'. The meaning being sometimes 95% is good enough so you can go on to the next job.
How much work do you want to put into each DVD? Can you live with the slight pauses?
would you suggest using a memory card?
Yes, but 16GB cards aren't cheap (yet). -
Please help with audio and video not syncing.
I'm using Encore 3, and have already authored a DVD a month ago without a glitch. The following are the same steps I used, but this time around, the video and audio in Encore are not syncing.
Here's what I've done.
1) I export my Final Cut projects to .mov using the following settings (Share > Master File).
Format: Video and Audio
Video codec: H.264
Resolution: 1920x1080
Audio file format: Quicktime Movie (AAC)
Include chapter markers: Unchecked
Roles as: Quicktime Movie
2) I run the .mov file in Compressor using the "Disc Burning" preset.
3) I then import the .ac3 and .m2v files that Compressor created into Encore.
4) In Encore, I select both files and go to New > Timeline.
In the Timeline window, the durations on both are the same. But I don't understand why the audio and video are not synced when I preview or when I burn a test DVD. The audio comes in just a tad late.
Video Clip:
Source In: 00;00;00;00
Duration: 00;02;33;29
In-Point: 00;00;00;00
Out-Point: 00;02;33;29
Audio Clip:
Source In: 00;00;00;00
Duration: 00;02;34;00
In-Point: 00;00;00;00
Out-Point: 00;02;34;00
What's puzzling is that two of the 10 videos I've import to Encore are synced perfectly -- same export settings from FCP, same settings Compressor.
Please help.
Thanks!
MarkHi Mark.
Do you have any situations where there is more than one video file in a timeline?
Secondly - why are you using H264 HD files for a DVD? This is using lossy compression to make the H264, which is in turn then scaled & even further bitrate reduced for M2V.
I would give it a try rendering an SD video file for use in Encore - not the H264 - and starting out with Dolby Digital or LPCM audio, not AAC.
As with all DVD authoring programs, Encore works best with DVD compliant assets - which you are most definitely using - but I still think you are over-complicating things by using H264/AAC at all.
Eliminating this may help. -
Please Please help with JavaScript and Actions
Hello!
Is there a way to perform a saved Action from the Action Pallette using a JavaScript script? I know there is a way to do it with Visual Basic.
Is there a way to run a Visual Basic script from a JavaScript script?(which could be a potential workaround if JavaScript CANNOT call on an Action)
Is there a way to call on a JavaScript from an Action?
Here's specific information on my problem:
I am using Illustrator CS2 on a PC
I have written all of the JavaScript scripts that I need to perform various layer selection procedures and they all work perfectly. I have placed them in the Presets > Scripts folder so that they appear in my file menu.
I wrote a very long action that called on these scripts (using Insert Menu Item > then selecting the script by going File > Scripts) sequentially and did some selecting and copy-pasting and applying graphic styles in between scripts. The Action worked PERFECTLY and ran all the scripts I needed to an automated a process that usually takes me an hour in less than five minutes!
I saved the actions and saved the file.
After closing Illustrator all of the lines of the action that called on scripts disappeared! It seems this is a known bug...I currently know of no workaround.
Can anyone help with any of the following things:
1. Getting actions to SAVE the commands to run javascripts
2. Writing a JavaScript that runs an Illustrator Action
3. Writing a JavaScript that runs a Visual Basic script that runs an Illustrator Action.
I spent three days learning the basics of JavaScript (mostly by trial and error) and successfully wrote all the scripts I needed...I was overjoyed! But now that I've closed illustrator my actions to run said scripts do not work. PLEASE ADVISE!!!
Thanks in advance,
Matthewtry next
1)if possible split JS-code into 2 parts (before/after action)
2)make vbs script with contents
Set appRef = CreateObject("Illustrator.Application.3")
appRef.DoJavaScriptFile("C:\my1.js")
appRef.DoScript(Action As String, From As String)
'add wait while ActionIsRunning
appRef.DoJavaScriptFile("C:\my2.js")
3) run vbs (File > Scripts or double-click). -
Please help with ovals and arrays
i'm creating an array that will be used to create a number of bubbles (simple ovals) on the screen. I can create 1 bubble/oval with no problem, but when i use the array to create multiple ones, everything craches and i get a big number of errors.
Can someone please help or point me in the right direction?
thank you
Marko
p.s. the code that i'm using at the moment is listed below. * to draw 1 oval, array not used
import java.awt.Color;
import java.awt.Graphics;
import javax.swing.JPanel;
import javax.swing.JFrame;
public class Bubbles extends JPanel
int array[] = {1,2,3,4,5};
public void paintComponent(Graphics g)
super.paintComponent(g);
this.setBackground(Color.WHITE);
for(int x = 0; x<5; x++)
g.setColor(Color.BLUE);
g.drawOval((array.(30,30,100,100));
public static void main( String args[])
JFrame frame = new JFrame();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
Bubbles b = new Bubbles();
b.setBackground(Color.WHITE);
frame.getContentPane().add(b);
frame.setSize(400, 400);
frame.setVisible(true);Finally, this plug-in is ready for beta testing on www.amazoncanvas.com
Thank you all who have participated in this program. -
Please help with download and installation
Hi,
I am trying to download jdk1.4etc to Solaris Sparc. I tried downloading several times, all the times I get corrupt files. How and from where do I install JDK2 on Solaris. i am also in search of a good text editor like textpad for Solaris. Can anyone give me suggestions? Also, I need it immediately for my term assignments.
Please Help!I am also having this problem. I have tried both the
tar.Z and sh files. I have run the .sh as myself and
as root. Here's what I see with the .sh installer:
Do you agree to the above license terms? [yes or no]
yes
Unpacking...
Checksumming...
1
The download file appears to be corrupted. Please
refer to the Troubleshooting section of the Installation
Instructions on the download page for more information.
Please do not attempt to install this archive file.
I am anxious to find a solution.I am having the same problem with both a download, j2sdk-1.4.0-linux-i386-rpm.bin, and Sun ONE cdrom, /disc3/j2se/1.4/j2sdk-1_4_0-linux-i386.bin, versions. I sincerely doubt that both are corrupted, at least I hope not. I'm attempting to set up the sdk under RedHat 7.2 in /usr/java. Have tried as both a user and as root - no joy! I would greatly appreciate any suggestions or help. -
I'm looking to get my boyfriend either a TV or home theater system for the basement. I know he eventually wants a 3d TV. Right now he has a set up where he has 2 tv's so he can play video games and watch sports.
The basement that the tv and home theater system will be in is large (I'd estimate at least 15 ft x 30 ft...maybe more) so I want to make sure the home theater system will be enough for the room. We live in a ranch so basically the basement is almost the size of the house with some of it being storage.
I've started to look at products online but there are so many and technology isn't really my thing.
If anyone could help with recommendations for the home theater system and/or the tv I'd appreciate it!
Thanks so so sooo much!!!!What will he be using the HT system for? Just watching sports or skipping the movie theater and watching them at home. If you plan to watch them at home your going to be on a tight budget with the home theater system but it is possible. Spend good money on the sub, that is one speaker you don't want to skimp out on. With such a big space you have a lot of room to fill and the cheap subs aren't going to cut it. You will probably need two subs as it is. The speakers I recommend on a tight budget Polk or Klipsch. My list includes a Denon receiver as I am a Denon fan but Yamaha, Onkyo, or Pioneer will suffice.
Here is a Option 1 will run you about 1700 with just one sub. You could always go up a model on each speaker if you feel the one sub is enough. I like an explosion sounding like it happened in front of me so that is why I mention 2 subs.
http://www.bestbuy.com/site/Denon+-+630W+7.1-Ch.+3D+Pass+Through+A/V+Home+Theater+Receiver/9894577.p...
http://www.bestbuy.com/site/Polk+Audio+-+Dual+5-1/4%22+2-Way+Floor+Speakers+(Each)+-+Black/8825453.p... speakers&cp=1&lp=12
http://www.bestbuy.com/site/Polk+Audio+-+5-1/4%22+Bookshelf+Speakers+(Pair)+-+Black/8825444.p?id=120... speakers&cp=1&lp=2
http://www.bestbuy.com/site/Polk+Audio+-+5-1/4%22+Center-Channel+Speaker+-+Black/8826149.p?id=120735... speakers&cp=1&lp=28
http://www.bestbuy.com/site/Speakers/Subwoofer-Speakers/abcat0205008.c?id=abcat0205008&&initialize=f...
Option 2 will cost $1400 before a subwoofer
http://www.bestbuy.com/site/Denon+-+630W+7.1-Ch.+3D+Pass+Through+A/V+Home+Theater+Receiver/9894577.p...
http://www.bestbuy.com/site/Mirage+-+OS%26%23179%3B-CC+Ompipolar+3-Way+Center-Channel+Speaker+-+Blac... speaker&cp=1&lp=11
and 4 of the below speaker
http://www.bestbuy.com/site/Mirage+-+OS%26%23179%3B-SAT+4-1/2%22+2-Way+Satellite+Speaker+(Each)+-+Hi... speaker&cp=1&lp=15 -
Please Help with Deleting and Putting in Music
Hi. I have a Nokia5300 Express Music. I want to add music on it but i don't know how. I have windows media player the PC suite thing and everything. But I don't know how to delete music or import music please help. This is very different from the ways i do it from the Ipod ...
HELP HELP HELPwait wait guys please help me delete my music i really want to delete ALL my music and put in NEW music i hate the windows media player iuno how to unsync it and delete it T_T
Maybe you are looking for
-
How do I activate my Isight camera to take an image of my gift card?
How do I activate my Isight Camera to take an image of my Gift card so I can redeem it? The camera sees the card OK, but I don't know how to make it take an image. Please help. Greg.
-
Why won't itunes 10.7 let me import video? im not a noob...
okay, so here we go..... i recently added videos to my itunes library. the day after i added them, i updated to 10.6.3. After that update, itunes will no longer allow me to add videos. Heres what Ive tried: opening video in quicktime to make a refere
-
All-day events sometimes don't sync from iPod to Mac using Exchange Server
I have an iPod touch (1st or 2nd generation, not sure) which syncs with my MacBook via ActiveExchange and the company's exchange server. I have been noticing that sometimes when I create all-day events on the iPod they don't show up in my Entourage-c
-
Dear Friends, I want to make mandatory field of search term 2 in vendoe master creation for some paricular vendor type.I have checked in vendor configuration by T Code OMSG, but there is no option for search term 2.please help me... Regards, Dishant
-
ISE EAP-FAST chaining EAP-TLS inner method - authorizing against AD
Just a question surrounding EAP-FAST chaining (EAP-TLS inner) and the ability to authorize the username in the CN field of the certificate against AD. As an example for standard EAP-TLS I am able to specifiy that the username should be in a specific