Please help with Ir setup.
I have 845 PE Max motherboard with 5 pin Ir conector, my Ir have 5 pin (straight) conector which I used on old 815 6337 Le5 motherboard.
How now I can conect on new motherboard?
Thanks
Scenic
Now I conect 4 wires on my motherboard Ir conector lik write in Manuals but I stil can't use my
Actisys Ir 210 L .
It sems to me that is problem in Bios setings.
I use:
Port 2F8/com2
and ASKIR - is this corect? it could be IrDa, HPSIR
Please if enyone can help me with this problem.
Otherwise the Motherboard is good and works wery stabil.
Scenic ?( ?(
Similar Messages
-
Can Someone Please Help with Email Setup!
I know it maybe a sin, but I have a hotmail account, I been trying to on my Iphone. It doesn't seem to be working, can some please help me out
you cant set it up in your mail app on your iphone to my understanding... Microsoft did not make this easy, since it needs a plug in on your computer to work and does not use standard pop3 protocals. Blame Microsoft not Apple on this one
My suggestion
Bookmark and use http://mobile.live.com to check your Hotmail account, it is designed for mobile phones and loads quick -
Please help with printer setup
I cant seem to get my new canon mp530 printer to work via airport extreme or express. I have downloaded the driver software on both powerbooks, and have been able to print when the usb is plugged in directly.I am replacing a hp1600 that worked over this network. Thank You...the error message i get is"error :300.the printer does not respond.make sure that the printer is powered on and properly connected to your computer.
Message was edited by: lawrence gelmanWere you actually able to print successfully over the wireless connection? My printer responds wirelessly-- the print try opens, the paper feeder turns, but then I get a 306 error.
I spent hours with tech support yesterday-- two different guys-- and both said I am trying to do the impossible. They say the Base Stations are only designed to deal with printers via USB.
But I don't see why the Base Station should care whether the wireless device is a printer or xbox or what have you, if it is wireless enabled.
It's all very frustrating. -
I can't set up a bellsouth account on ipad, using info from Outlook that works fine on a pc
you cant set it up in your mail app on your iphone to my understanding... Microsoft did not make this easy, since it needs a plug in on your computer to work and does not use standard pop3 protocals. Blame Microsoft not Apple on this one
My suggestion
Bookmark and use http://mobile.live.com to check your Hotmail account, it is designed for mobile phones and loads quick -
Please help with SIP configuration on 2801 router
Hi All.
Please help me to setup a SIP account. I’m already struggling to do that for a few days, and can’t find out how to finish that. We have 2xISDN lines running, so I need to add a SIP trunk to existing config.
The information from our SIP provider:
We have issued the following DDI range: 018877000 – 99
There is no need to register the DDI’s as these will be offered to your PABX IP address provided to in the completed SIP trunking form.
Configuration details are as follows:
Our Primary Proxy:- 99.234.56.78
Codec supported:- G711Alaw, G729 (G711Alaw is the preferred codec)
Fax Support:- T38 and G711Alaw
DTMF:- RFC2833 and INFO
CLI Method:- Remote-Party-ID
Trunk doesn’t require registration; you just need to send Invite. In cisco this is done through Dial-peer session-target command. We are authenticating your IP address for outgoing calls and incoming calls we then forward to the IP mentioned in the sip form.
This is a SIP configuration on Cisco2801 router (I used outgoing calls only):
translation-rule 10
Rule 0 ^90 0
Rule 1 ^91 1
Rule 2 ^92 2
Rule 3 ^93 3
Rule 4 ^94 4
Rule 5 ^95 5
Rule 6 ^96 6
Rule 7 ^97 7
Rule 8 ^98 8
Rule 9 ^99 9
interface FastEthernet0/0.1
description ***DATA VLAN***
encapsulation dot1Q 1 native
ip address 10.1.1.101 255.255.255.0
interface FastEthernet0/0.2
description ***VOICE VLAN***
encapsulation dot1Q 2
ip address 192.168.22.1 255.255.255.0
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
call start slow
sip
bind control source-interface FastEthernet0/0.2
bind media source-interface FastEthernet0/0.2
registrar server expires max 36000 min 600
voice class codec 1
codec preference 1 g729r8
codec preference 2 g711ulaw
codec preference 3 g711alaw
dial-peer voice 1 pots
description ### External Dialling via BRI ###
preference 7
destination-pattern 9T
translate-outgoing called 10
direct-inward-dial
port 0/0/0
forward-digits all
dial-peer voice 2 pots
description ### External Dialling via BRI ###
preference 2
destination-pattern 9T
translate-outgoing called 10
direct-inward-dial
port 0/0/1
forward-digits all
dial-peer voice 9000 voip
description ** Outgoing calls to SIP **
preference 1
destination-pattern 9T
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target ipv4:99.234.56.78:5060
dtmf-relay rtp-nte
codec g711alaw
no vad
sip-ua
timers connect 100
sip-server ipv4:99.234.56.78
I used debugging commands to troubleshoot the calls.
2801(config-dial-peer)#
094509: Jan 24 09:27:06.204: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=211, Called Number=, Voice-Interface=0x65FA35B4,
Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
094510: Jan 24 09:27:06.204: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=20018
094511: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9, Peer Info Type=DIALPEER_INFO_SPEECH
094512: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9
094513: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094514: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094515: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90, Peer Info Type=DIALPEER_INFO_SPEECH
094516: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90
094517: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094518: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094519: Jan 24 09:27:06.912: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908, Peer Info Type=DIALPEER_INFO_SPEECH
094520: Jan 24 09:27:06.912: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908
094521: Jan 24 09:27:06.916: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094522: Jan 24 09:27:06.916: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094523: Jan 24 09:27:07.012: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086, Peer Info Type=DIALPEER_INFO_SPEECH
094524: Jan 24 09:27:07.012: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086
094525: Jan 24 09:27:07.016: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094526: Jan 24 09:27:07.016: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094527: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862, Peer Info Type=DIALPEER_INFO_SPEECH
094528: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862
094529: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094530: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094531: Jan 24 09:27:07.212: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908621, Peer Info Type=DIALPEER_INFO_SPEECH
094532: Jan 24 09:27:07.212: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908621
094533: Jan 24 09:27:07.216: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094534: Jan 24 09:27:07.216: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094535: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086215, Peer Info Type=DIALPEER_INFO_SPEECH
094536: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086215
094537: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094538: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094539: Jan 24 09:27:07.412: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157, Peer Info Type=DIALPEER_INFO_SPEECH
094540: Jan 24 09:27:07.412: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157
094541: Jan 24 09:27:07.416: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094542: Jan 24 09:27:07.416: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094543: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908621577, Peer Info Type=DIALPEER_INFO_SPEECH
094544: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908621577
094545: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094546: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094547: Jan 24 09:27:07.612: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086215777, Peer Info Type=DIALPEER_INFO_SPEECH
094548: Jan 24 09:27:07.612: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086215777
094549: Jan 24 09:27:07.616: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094550: Jan 24 09:27:07.616: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094551: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094552: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094553: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094554: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094555: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774T, Peer Info Type=DIALPEER_INFO_SPEECH
094556: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774T
094557: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094558: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094559: Jan 24 09:27:10.711: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=90862157774, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094560: Jan 24 09:27:10.711: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094561: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094562: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094563: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
094564: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
094565: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094566: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094567: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094568: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094569: Jan 24 09:27:10.719: fb_get_reject_cause_code: ERROR cause_code NULL
094570: Jan 24 09:27:10.727: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam " <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:10 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397230
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094571: Jan 24 09:27:11.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:11 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397231
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094572: Jan 24 09:27:12.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam " <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:12 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397232
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094573: Jan 24 09:27:14.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam" <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:14 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397234
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
I made some changes in the router configuration.
I removed FA0/0.2 Voice interface from Voice service voip configuration (bind control source-interface FastEthernet0/0.2 and bind media source-interface FastEthernet0/0.2). And now it’s using ip address 10.1.1.101 (data ip).
The debugging is changed now. I can send and receive a respond from SIP server. But It shows an error: SIP/2.0 404 Not Found
Then it moves to ISDN line, and use this line to make a call.
102988: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774T, Peer Info Type=DIALPEER_INFO_SPEECH
102989: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774T
102990: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
102991: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
102992: Jan 24 14:45:47.290: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=90862157774, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
102993: Jan 24 14:45:47.290: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
102994: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
102995: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
102996: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
102997: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
102998: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
102999: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
103000: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
103001: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
103002: Jan 24 14:45:47.298: fb_get_reject_cause_code: ERROR cause_code NULL
103003: Jan 24 14:45:47.310: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK4875CB9
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Seam" <sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 14:45:47 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 3989446920-1171263969-2466545983-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327416347
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 2438 9821 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 19412 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
103004: Jan 24 14:45:47.354: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 404 Not Found
From: "Sam "<sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>;tag=7fad61f03708-100007f-13c4-55013-a0142-10fd12c8-a0142
Call-ID: [email protected]
CSeq: 101 INVITE
Via: SIP/2.0/UDP 10.1.1.101:5060;received=88.99.77.44;branch=z9hG4bK4875CB9
Content-Length: 0
103005: Jan 24 14:45:47.362: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK4875CB9
From: "Sam " <sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>;tag=7fad61f03708-100007f-13c4-55013-a0142-10fd12c8-a0142
Date: Tue, 24 Jan 2012 14:45:47 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
103006: Jan 24 14:45:47.374: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0/1, TEI 96 changed to up
103007: Jan 24 14:45:51.313: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=, Called Number=211, Peer Info Type=DIALPEER_INFO_SPEECH
103008: Jan 24 14:45:51.313: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=211
103009: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
103010: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=20018
103011: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=, Called Number=0862157774, Peer Info Type=DIALPEER_INFO_SPEECH
103012: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=0862157774
103013: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)
103014: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
Result=NO_MATCH(-1)
103015: Jan 24 14:46:08.815: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0/1, TEI 96 changed to down
2801(config-dial-peer)#
Then I removed SIP-UA as I was told there is no registration necessary, only Dial-peer configuration.
But it didn’t affect anything.
Then I add translate-outgoing called 10 command to dial-peer 9000, nothing happened.
Really stuck and don't know where to look at.
Any help will be highly appreciated.
Thanks.Hi Dan.
Yes, I saw that RTP debugging, but what can I change there? Maybe I need to open more ports on ASA for RTP like 19412?
I use Cisco ASDM for ASA to make changes.
There are static NAT rules for: Server source IPs(10.1.1.100) to Outside(translated IPs, 88.99.77.44) for a few ports.
Also I added Security policy access rules for LAN: Any to SIP, and Outside: SIP to any.
For NAT:
I can't add this: for LAN: STATIC ROUTER IP 10.1.1.101 (AS SOURCE) UDP 5060 TO OUTSIDE IP 88.99.77.44
(AS TRANSLATED) UDP 5060
Because there is already translation for the Server.
Debugging looks like that now. There is no Received: SIP/2.0, but I can make an outside call with no audio.
116013: Jan 25 15:28:25.584: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
116014: Jan 25 15:28:25.584: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
116015: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
116016: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
116017: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
116018: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
116019: Jan 25 15:28:25.588: fb_get_reject_cause_code: ERROR cause_code NULL
116020: Jan 25 15:28:25.600: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:25 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505305
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116021: Jan 25 15:28:26.096: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:26 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505306
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116022: Jan 25 15:28:27.096: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:27 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505307
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116026: Jan 25 15:28:57.092: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam" ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:57 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389preference 1771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505337
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
I'll add Incoming dial-peer now.
Not sure what kind of NAT rule should I put into ASA to allow in and out sip traffic.
Appretiate your help.
Thanks a mill. -
I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.
If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.
-
How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
Please help with proper steps, if any.Also see... these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141 -
Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreekI am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline. -
Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.
Adobe - Lightroom : For Macintosh
Hal -
[ETL]Could you please help with a problem accessing UML stereotype attributes ?
Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank youHi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana -
Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs
Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
Thanks,
Hussein -
Welcome.
At the outset, I'm sorry for my English
Please help with configuration Photoshop CS6 appearance.
How to disable the background of the program so you can see the desktop. (same menus and tools)
i wantto be the same effect as CS5.Please try turning off
Window > Application Frame -
cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?
If you mean updae server
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Otherwise what server are you talking about -
Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work
You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
Regards. -
Please help with slideshow problems!
Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing. Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened". How can I save a
slideshow inprogress and be able to reopen and continue to edit and make slideshow? I want to thank anyone who can help me with this in advance as I
have gotten so frustrated that I want to just scream.
ThanksThanks for the help, thought I had done so but maybe not. Anyway will have another go at it, now may I ask another
question? I am trying to add audio to slideshow. I have some music I purchased thru amazon as mp3 files but I get
message no codec and when I try to add wmv I get same message. What type of file do I need and how can I add
multiple songs to one slideshow. I have one little wmv file that will go in, but it just replicates itself multiple times until
it fills slide show.
Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
Date: Sun, 26 Dec 2010 20:34:32 -0700
From: [email protected]
To: [email protected]
Subject: Please help with slideshow problems!
You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
Now you are most probably using only the Output command: that is what makes the wmv file.
You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
-- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
-- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
-- The 1st entry on that Shortcuts bar is "Save Project"
It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing. Save each Project with a unique name.
After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
Note: you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
>
Maybe you are looking for
-
Blue Screen Error Please Help.
Hello ... i m getting this error when ever i start my pc Multiprocessor_configuration_not_supported... this error came when my system finished booting then eventually this blue screen error occured and i needed to restart my computer .. after restart
-
Installed snow leopard and the right click on my mouse no longer works. Any ideas?
I just replaced my hard drive and installed a clean copy snow leopard with all updates. The right mouse button (normal wired mouse that came with imac) with the menu drop down is no longer working. changed secondary button in mouse settings and got t
-
HI gurus, I am third party Billing, i had done sales order, PO w r t PR, and i did MIRO, while creating Billing i am getting an error log Item is not relevant for Billing Message No VF 044, i had checked ITEM category (TAS) Billing relevance
-
Do i need to remove the .mac account from my mail
HI, Just setup the icloud, everything seems to be working fine, getting mail exc.. But when i open my mail i see that the .mac acount is offline! i get the message: The iCloud IMAP server "p99-imap.mail.me.com" rejected the password for user --------
-
Identification of date Even or odd
Hi All, could you please tell me how can i identify the given date is even or odd. please provide me if there is any function module or logic. Thanks in Advance. Sudhakar