Please Help with iTunes Download- Error 1606

OKay, so you had me try to download itunes and I did try. When it did start to download it was checking for something on my computer and gave me this error- Error1606: Could not access network location bin. Then when I closed the download is said Error: -1603 fatal error during installation. I'm sure the second one was because I closed it, but I'm not sure about the first one. Thanks for your help, it's appriciated.
Thanks-
Apple Customer- Katrina

Just deleted all other (ANyDVD, Decoder and shrink) programs, uninstalled Itunes and Quicktime; reinstalled Itunes 7.3 and Quicktime 7. Thanks for all the help. Randy

Similar Messages

  • Please help with iTunes download error -50

    I have been never been able to download from iTunes and always get the unable to dowload error -50 message. I have seen people have this same question before on here and were able to fix it by adjusting their firewall settings, etc. I am not sure how to do that. I have Norton Internet Security and thought that may be conflicting with it as well. My computer is Windows XP SP2. Can anyone help me fix this? Any specific instructions would be helpful and much appreciated! Thanks!

    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Please Help! Itunes Encountered Error While Trying To Install.

    Please help if have an Acer Aspire 5741  with iTunes. I tryed to install the newest vesion 10.3 and it says " Itunes Encountered A Fatal Error. Try using Tools> Download only". But it does not work even though i have the file in just opens iTunes and thats it. And now it has the administrater symbol next to it.
    Please Help if you can........?????

    Hi sundy01, That sounds like a corrupted system file. Do an Archive and install:
    http://support.apple.com/kb/HT1710

  • Please help with Itunes...

    I downloaded AnyDVD so I'd be able to burn dvd's on my pc. While doing this I think I may have screwed my Itunes up. I've tried uninstalling and reinstalling all AnyDVD, Itunes, Quicktime programs. The problem I'm having is when I bring up Itunes and try burning a cd it says "disc burner or software not found." I ran diagnostic check on Itunes and this is what I get. Keep in mind when I checked the drivers for my pc SlySoft came up on all of them. SlySoft is the program for AnyDVD.
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Computer Corporation Dimension 8200
    iTunes 7.2.0.35
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: ElbyDelay (5.1.0.0), AnyDVD (5.3.2.1), PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), Cdr4_xp (8.0.0.212),
    UpperFilters: Cdralw2k (8.0.0.212), pwd_2k (8.0.5.9), GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    NVIDIA RIVA TNT2 Model 64
    NVIDIA GeForce4 MX 420
    Connected Device Information:
    DiskDrive, WDC WD800BB-75CAA0, Bus Type ATA, Bus Address [0,0]
    CDROM, JLMS DVD-ROM XJ-HD166, Bus Type ATA, Bus Address [1,0]
    CDROM, TEAC DVD+RW DV-W58E, Bus Type ATA, Bus Address [0,0]
    CDROM, NERO IMAGEDRIVE SCSI CdRom Device, Bus Type SCSI, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: Unsupported CD or DVD drive.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    E: Unsupported CD or DVD drive.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    F: Unsupported CD or DVD drive.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    Is there a program out there that will let me run the AnyDVD program along with Itunes and be able to use Itunes 100%???? Please help... Lost in NY

    Just deleted all other (ANyDVD, Decoder and shrink) programs, uninstalled Itunes and Quicktime; reinstalled Itunes 7.3 and Quicktime 7. Thanks for all the help. Randy

  • Can someone help with a Download Error?

    I'm using a MacBook - I have tried a few times to download several updates for things such a firefox, or even to upgrade something from Apple itself.
    The download will start and go all the way through, then, at the end it says: Download Error ___blank____  cannot be opened, because of an unknown error  occured- Try saving to disk first then opening the file.
    What I'm trying to download currently is some type of upgrade because I am running Mac OS X version 10.5.8 and I'd like to have something newer if at all possible (maybe it's just not possible?)
    Any info would be helpful - also, if you can dumb it down a bit for me? Thank you.

    10.5.8 is as high as you can go for a download at this point. If you want a more recent OS you will need to purchase a disk with Snow Leopard (10.6) on it. Once that is installed you can go to Lion (10.7) or Mountain Lion (10.8) if your MacBook supports it, by a (paid) download.
    Best of luck.

  • Please help.  ITUNES has error 2093.  re-install ITUNES has error code 3.

    Hi,
    My daughter and son have TUNES libraries. Clicking on ANY of the 2 libraries gets an error -2093 and the comment to reinstall. I reinstall and this gets an error code of -3. I saw a thread where someone had NORTON ( I don't). I use Microsoft, CA, and Spyware Doctor. Never had a problem before, but you've heard that one. Please help Does anyone know how this can be fixed? Short of a hammer to the computer, I can/will do anything it needs, but I don't have a clue what to do. THANKS !!!!

    Do a QuickTime standalone install. That usually fixes the 2093 error.
    http://www.apple.com/quicktime/download/standalone.html
    Save it to your your hard drive - don't install over the internet.

  • Please help with itunes store

    I am using the monster paradise app. It is a game hwere you can buy cristals to keep on going on the game. But it tells me that I cannot buy anything. But looking in my bank account I see that apple is charging me money for things that i did not buy. Exactly 1.98€ what do I have to do? They do not answer me to any email that i habe sent. Please help
    iPhone 5, iOS 6.1.3

    You should not leave personal info on a public forum.
    everyone here is a user just like you.
    You are not addressing Apple here at all.
    You need to click Contact Us at the bottom of this page and contact iTunes support.

  • Please Help! ITunes Store Error -9808

    I just got a new Ipod Classic today and downloaded Itunes. I put some CD's on it, previewed songs, and browsed podcasts, etc. I then decided I wanted to download a few songs and was going to make an account, however, Itunes won't let me. I keep getting the message:
    We could not complete your itunes store request. An unknown error occured. (-9808). There was an error in the iTunes store please try again later. At first I thought it would have been because there were so many people on because it was Christmas but it is now past one o'clock.(4 east coast) I am just really confused and want to download music. If anyone can tell me what this means or even better have a solution to fix it I would really appreciate it.

    I've been having the same problem, looked a bit further on the discussion board and someone mentioned to check that your date and time was set correct, I was certain mine was but when I checked for some reason the time was correct but the date was the 26th Jan 2008, so changed it to the coreect date 26th Dec 2007 and it started working straight away, didn't even need to restart or re install anything, hope this works for you.

  • Please Help with Itunes/Ipod  issue

    So I got given an Ipod touch for my birthday and it says i need itunes to use it, so i try to go to apple site to download itunes and the site will not load. I tried both the UK and US sites. Infact I cannot get any page to load up other then the UK sites home page. So this is making it kinda difficult to get itunes and get my ipod working and its **** annoying as i am left with a present i cant use.
    I know its not my PC at fault as i have tried other computers and the pages still dont load.
    Does anyone know where i can download itunes from or even why the site has not been working for the last week?

    yep just tried your link and the page just doesnt load, i have sat here for 5 minutes on the same page waiting for it to load and nothing.
    It does the little swirly loading thing in the corner of the tab to say its loading the page but it doesnt actually get there and finish it.
    I have tried 3 different browsers on 4 different computers and also asked a friend to try on theirs to see if they can get to it and they cant either, so it cant be the computer, something must be up with the site.

  • Can Someone please help my itunes says error -9812!! help

    does anyone else have the same problem if they do and they have fixed their problem can you tell me what you did please i need to fix this its been like this for like 2 months!

    Hi Steph,
    This (the -9812 error) was a widespread problem a while back and most people found that re-registering their .dll security certificates did the trick. Apple posted a help page (http://docs.info.apple.com/article.html?artnum=301520) but the Microsoft link no longer works. As such, here are some instructions and a web page reference. Hopefully this will work for you:
    To register the DLL files, follow these steps:
    1. Click Start, click Run, type regsvr32 softpub.dll in the Open box, and then click OK. When you receive the message that the DllRegisterServer succeeded, click OK.
    2. Click Start, click Run, type regsvr32 initpki.dll in the Open box, and then click OK. When you receive the message that the DllRegisterServer succeeded, click OK.
    3. Click Start, click Run, type regsvr32 mssip32.dll in the Open box, and then click OK. When you receive the message that the DllRegisterServer succeeded, click OK.
    4. Click Start, click Run, type regsvr32 wintrust.dll, click OK, and then click OK when you receive the message that the DllRegisterServer succeeded.
    And here's the web page reference:
    http://www.technipages.com/article26.html
    Best of luck.

  • Please help with this weird error!

    I am using the normal template with based on Existing Tables. When I try to edit the rows with the edit icon not all fields in the table are filled. If I had Version number 1.1.1, it is shown as blank in the edit screen but the number still displays in the main table. And when i try to edit the row nothing changes after i edited it "successfully". Any suggestions? thanks

    ORA-20001: Error in DML: p_rowid=TESTingS, p_alt_rowid=SID, p_rowid2=TESTingS, p_alt_rowid2=SERVER. ORA-01403: no data found
    The above is the complete error. I create rows fine but when I edit them i get this error. Also some fields are empty when there is definitely data init from the table view. please help

  • Please help with itunes library

    Recently my PC died on me. I have all of my itunes library on an external drive and fortuntately made a copy of the itunes folder under C;\ users\ music, etc. In the past after a major hardware upgrade (ie hard drive) I just replace the  C;\ users\ music, etc. with the copy of the iTunes folder and would change the  iTunes media folder location to the external drive (G:\iTunes Media\iTunes Media folder)  which worked in the past. I thought it had worked but after going through my playlists none of the songs worked! What have I done wrong? I have over 77,000 songs that I have made playlists and genius playlists. The system I had was windows 7 and now using my sons unused pc with Vista.
    Please assist me if you can.
    Thanks

    This is very confussing. As I said, I thought it had worked when I tested just the top three songs in my music library. Wanted to clarify that why I went to the playlists it does not play as well as beyond the few three songs I tested. The original Drive letter was T;\ but when I connected it to my sons pc it was G:\ for some reason. I changed it to T:\ and when I changed the media location to reflect the change it asked me ""Would you like iTunes to move and rename the files in your new iTunes Music folder to match the "Keep iTunes Music folder organized" . I always had keep my itunes organized but the fact that it asked again I wasnt sure what to answer (Yes or No). in anycase, my music playlists did work but found a few that do not or the songs are missing under the playlists. Whats going on here?

  • Please help with this ProC error

    Here's what I'm getting:
    [oracle@dodona proc]$ make -f demo_proc.mk sample1
    make -f /oradb01/app/oracle/product/8.1.6/precomp/demo/proc/demo_proc.mk OBJS=sample1.o EXE=sample1 build
    make[1]: Entering directory `/usr/local/oracle816/app/oracle/product/8.1.6/precomp/demo/proc'
    proc iname=sample1
    proc: error in loading shared libraries: libclntsh.so.8.0: cannot read file data: No such file or directory
    make[1]: *** [sample1.o] Error 127
    make[1]: Leaving directory `/usr/local/oracle816/app/oracle/product/8.1.6/precomp/demo/proc'
    make: *** [sample1] Error 2
    My LD_LIBRARY_PATH is set. LIBHOME used in the demo makefile is set in $ORACLE_HOME/precomp/lib/env_precomp.mk as $(ORACLE_HOME)/lib/.

    You should find a symbolic link in your $ORACLE_HOME/lib directory:
    libclntsh.so -> libclntsh.so.8.0
    If the file or the link doesn't exist for some reason (maybe an installation problem), you can run $ORACLE_HOME/bin/genclntsh to recreate them.
    I also still had problems getting the makefile to find this file, so I modified the $ORACLE_HOME/lib/sysliblist file and added -lclntsh to the end, which works fine for me now.
    Hope this helps... Frank

  • Please help with a server error

    Server Error in '/' Application.
    Runtime Error
    Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
    Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
    <!-- Web.Config Configuration File -->  <configuration> <system.web> <customErrors mode="Off"/> </system.web> </configuration>
    Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
    <!-- Web.Config Configuration File -->  <configuration> <system.web> <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/> </system.web> </configuration>

    Hello,
    So, tell us more... what services are you sharing, is this a NetBoot? Admin account? What App is reporting this?
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.

  • Please help with iTunes - it's importing music automatically that I don't..

    want it to...
    I don't understand how it could have such a ridiculous setting. I imported some music from a folder on my hard drive (Multimedia under my documents) - I intended this to be a one time operation. Now any time a file is put into that folder it is automatically imported into iTunes. This is EXTREMELY irritating and there doesn't seem to be any place obvious to turn this feature off. Terrible. Please tell me there is a way to fix this. I don't want iTunes to EVER add ANY music or other files unless I specifically tell it to manually.
    Thanks!

    Now any time a file is put into that
    folder it is automatically imported into iTunes.
    Okay, wait just a second. How in the HECK did you make it do this?
    Because this is a feature people have actually been wanting for a LONG time. iTunes totally lacks it, or at least it has up until now, so if you figured out how to make it happen, please tell the entire class.
    This is EXTREMELY irritating and there doesn't seem
    to be any place obvious to turn this feature off.
    On the contrary, most people have been trying to work out how to turn it ON.

Maybe you are looking for