PLEASE HELP WITH ITUNES ISSUE!!!!

as of today when I try to go to Itunes store I get this message :
ITunes could not connect to itunes store the requested resource was not found. make sure your network connection is active and try again.
What do I do??
TIA

yep just tried your link and the page just doesnt load, i have sat here for 5 minutes on the same page waiting for it to load and nothing.
It does the little swirly loading thing in the corner of the tab to say its loading the page but it doesnt actually get there and finish it.
I have tried 3 different browsers on 4 different computers and also asked a friend to try on theirs to see if they can get to it and they cant either, so it cant be the computer, something must be up with the site.

Similar Messages

Please help with Contribute issue- Adobe or anyone!

My issues are many- I don't know where to start. First, as a long-time Adobe customer, I can not believe how support has declined- I really miss my "support package" from the early 90's when I spoke with a person who really knew how to address my problems and/or questions. I am so tired of being outsourced to someone who has no idea how to address my problem- only to send me to "Document #8932023912 03" off of the Adobe website. I want to talk to someone who KNOWS and APPRECIATES this product, and who understands its internal behavior (like what I get when I call MAC SUPPORT). I will pay for it! I have invested thousands of dollars on Adobe software and am now at an unacceptable standstill.
My small business relies on the Adobe Creative Suite 4 and the Contribute program. Up until now, I have never had a complaint, especially after moving to Mac a few years ago. Troubles started after two things (still not sure what the culprit was) - installing Snow Leopard and installing a Wacom Bamboo tablet (on the same day- my bad). Well, Illustrator, Photoshop work just fine as well as my other non-Adobe programs. But I can't even open InDesign (will post this on the proper post) or Contribute. So Apple had me deduce that I needed to create a new User and try things there. I eventually migrated to this new user but still, I cannot use Contribute.
I have set permissions with the program and contents of the folder- in addition to my Contribute keys to no avail. I can't even open it. Nor can I open it in my Root user which at least lets me run In Design. I am at a total loss and I need to update a website for my client. PLEASE someone, I would so greatly appreciate any advice or instruction as to how to run Contribute on my new user. Or in my Root user. I just need to get it to open! Reinstall did nothing PLEASE HELP.
A special note to anyone from Adobe: I want to talk to someone via a support package-- NOT outsourced. Does this fee-based option exist? It doesn't seem to from the main support number. If someone can help direct me, I would appreciate the proper instruction to do so. I need to get my InDesign running again and I have already invested multiple hours, days with Adobe support with NO solution at all. This is unacceptable in my mind, especially for the moneys invested.
Thank you in advance... Aimee M.

I totally share your views on Adobe period. I loved Macromedia., they also answered all my questions, then Adobe had to buy them out! I called them today (sales Dept., that's where they answer rather quickly., of course), they explained the following: You can pay for a live person, but the prices differ in that they come in packages. In other words, you can pay a flat rate per hour for one-on-one OR pay for one-on-one tech support 5 times per month, and the amount of times per month vary from that point on., and so does the price! I'm baffled! They are HORRIBLE!! . Like yourself, am on a standstill ever since I've been stuck with not being able to publish my site with current edits and it gives me a message whereas my own company name is "currently editing the page," so it keeps kicking out. I've tried everything, including but not limited to the following: going to the library and checking out books to troubleshoot; going on Adobe pages for support as well the Help features on the software program., etc...I'm exhausted! ADOBE you guys need to reassess your Customer Care Support and your outsourcing business as well!!! YOU WILL LOOSE YOUR CUSTOMERS RATHER QUICKLY!!

Please help with this issue "To Run a SSIS Package outside of Server Data Tools You must install Drived Column of Integration sercvies of higher" From C# app

i have searched all over the google and here on MSDN(I have read all the threads related to my problem ) , i am new to SISS and doing my clg project ,
I have this package which loads data from dim tables to a fact table , my Package runs without any problem in BIDS (2012)
I have installed SQl Server integration services on SQL and service is also running in services.msc,
the problem comes when i execute my package using my C# application i am using MSDN Method to execute a SSIS package programmatically given here.
"http://msdn.microsoft.com/en-us/library/ms136090.aspx"
For loading my FactTable i have used a Derived columns and some lookups ,
Now if i don't use derived columns and looks ups and just use source and destination component then my package runs fine from my C# application but if i use derived columns or looks ups etc it gives the following error
"Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/SSIS.Pipeline: To Run a SSIS package outside of SQL Server Data Tools you must Install Derived Column of Integration services of higher"
I am searching and trying to resolve this issue from previous 2 days but without any luck please help or guide me what is solution to this problem ,,i will be very thankful
I have also found that integration services that are running on my system have version 10.0
but the BIDS have version Version 11.0.3402.0
IS this causing problem ? if yes then what i have to do ?

Hi BlaxButt,
The package is developed in SSDT installed by SQL Server 2012, so it is a SSIS 2012 package. However, the Integration Services you have installed is SQL Server 2008 R2 version. To run the package outside SSDT, you need SSIS 2012 installed. The reason why
the package runs fine with only Source and Destination components is that such a simple package can be executed by the DTExec utility installed by SQL Server 2012 Data base Engine or Client Tools (SQL Server Import and Export Wizard). To run a package that
uses other tasks/components outside SSDT/BIDS, the SSIS runtime is also required except the DTExec utility. To obtain the SSIS 2012 runtime, we have to install SSIS 2012 on the server where the package runs.
Reference:
http://stackoverflow.com/questions/19989099/getting-error-running-ssis-package-on-non-ssis-server
Regards,
Mike Yin
TechNet Community Support

URGENT!!! Java Gurus Please Help with adf issue!

PLEASE SEE MY LATEST POST BELOW TIMO'S RESPONSE. THE REQUIREMENT HAS CHANGED. THAT IS THE ISSUE I AM LOOKING A SOLUTION FOR.
Hello All,
We have a requirement where our adf/jsf app needs to pick an EXCEL file from the server where the application is deployed. The sequence is :
User comes to the page
Clicks on "Open EXCEL" button
EXCEL file located in the c:/ of the server opens up.
How can this be done? I do not see any coding needed because the EXCEL file is being opened as is (and after user views it he closes the file) and the data is not being transferred to the jspx page.
*We are totally flexible in how this is implemented - ie, using button, link , html etc etc. What ever works!!!!*
Thanks,
Edited by: user12054715 on Aug 17, 2010 8:54 PM
Edited by: user12054715 on Aug 18, 2010 4:11 PM
Edited by: user12054715 on Aug 18, 2010 4:13 PM

Hello Timo,
I am using 10.1.3g so your response is not going to help me.
However, I have another question that I have already posted on the Forum. Please help me...
Requirement:
*1. Java application should be able to write "Hello World" in the excel file, when the user opens it.*
I CAN DO THIS WITH THE FOLLOWING CODE:
HSSFWorkbook wb = new HSSFWorkbook();
HSSFSheet sheet = wb.createSheet("newSheet");
HSSFRow row = sheet.createRow(1);
row.createCell(1).setCellValue("HelloWorld!!!!!!!!!");
*2. A "Write To Excel" button on jsf page opens a dialog asking user to Save or Open the excel file. (user can save the file anywhere on his machine)*
I CAN DO THIS WITH THE FOLLOWING CODE:
In jsf:
<af:commandButton text="Download" action="#{myBackingBean.writeToExcel}" useWindow="true"/>
In backing bean:
public static void writeToExcel() throws IOException
String filename = "workbook.xls";
// //Setup the output
String contentType = "application/vnd.ms-excel";
FacesContext fc = FacesContext.getCurrentInstance();
HttpServletResponse response = (HttpServletResponse)fc.getExternalContext().getResponse();
response.setHeader("Content-disposition", "attachment; filename=" + filename);
response.setContentType(contentType);
PrintWriter out = response.getWriter();
BOTTLENECK: When the user opens the excel how do I show "HelloWorld!!!!!!!!!" ?

Please help with WSRPi Issue

Hi Gurus,
I am using the Application Workspace Portlet extension for JDEV 1013.
This morning I deployed successfully some JSR-168 Portlets in my WSRP OC4J container and registered the providers successfully with Portal 10.1.4
Now I am following exactly same steps but I am encountering the following error:
An error occurred during the call to the WSRP Provider: Java stack trace from root exception:
java.rmi.ServerException: Internal Server Error (java.lang.RuntimeException: oracle.webdb.wsrp.server.ContainerException: Unable to load resource bundle "project1.resource.Portlet1Bundle")
at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:384)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:245)
at oracle.webdb.wsrp.WSRP_v1_ServiceDescription_PortType_Stub.getServiceDescription(WSRP_v1_ServiceDescription_PortType_Stub.java:63)
at oracle.webdb.wsrp.client.design.v1.OraWSRP_v1_ServiceDescription_PortType.getServiceDescription(Unknown Source)
. (WWC-43273)
Any Ideas for this issue??
Please Help.
Thanks
JO

Hi JO,
I remember this problem - it used to occur in one of my Portlets. It usually happens when the Portlet is not compiled using the same JDK compiler as the OC4J.
Does your JDev 10.13 ( the default JDK is JDK 1.5 ) & the OC4J contaier for Portal 10.1.4 have the same JDK version ?
Regards,
Sandeep

Please help with Itunes...

I downloaded AnyDVD so I'd be able to burn dvd's on my pc. While doing this I think I may have screwed my Itunes up. I've tried uninstalling and reinstalling all AnyDVD, Itunes, Quicktime programs. The problem I'm having is when I bring up Itunes and try burning a cd it says "disc burner or software not found." I ran diagnostic check on Itunes and this is what I get. Keep in mind when I checked the drivers for my pc SlySoft came up on all of them. SlySoft is the program for AnyDVD.
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 8200
iTunes 7.2.0.35
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: ElbyDelay (5.1.0.0), AnyDVD (5.3.2.1), PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), Cdr4_xp (8.0.0.212),
UpperFilters: Cdralw2k (8.0.0.212), pwd_2k (8.0.5.9), GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
NVIDIA RIVA TNT2 Model 64
NVIDIA GeForce4 MX 420
Connected Device Information:
DiskDrive, WDC WD800BB-75CAA0, Bus Type ATA, Bus Address [0,0]
CDROM, JLMS DVD-ROM XJ-HD166, Bus Type ATA, Bus Address [1,0]
CDROM, TEAC DVD+RW DV-W58E, Bus Type ATA, Bus Address [0,0]
CDROM, NERO IMAGEDRIVE SCSI CdRom Device, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
F: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
Is there a program out there that will let me run the AnyDVD program along with Itunes and be able to use Itunes 100%???? Please help... Lost in NY

Just deleted all other (ANyDVD, Decoder and shrink) programs, uninstalled Itunes and Quicktime; reinstalled Itunes 7.3 and Quicktime 7. Thanks for all the help. Randy

Please help with export issue with HD.

I have a current project set at 1920x1080 HDTV 1080i (16x9) and my customer has decided to change his mind and not go HD 16x9 which I had shot in specifically for this reason. What settings could I use to export for 720x480 DVD 4:3? Please help.
Thanks
Joe

+Do I copy and past the Sequence file from the HD into a DV NTSC new project? Yes or no?+
Yes. Once you are done export it to Compressor to encode your video into an m2v and the audio into an ac3 dolby stereo. Then import those as assets in DVDstudio4, create your menu, if you need one and burn your DVD.
+Can you give me a more step by step?+
As I asked before...are you not familiar with using Compressor and/or DVD Studio Pro?
If not (and if the links I sent to you are not helpful enough) then follow these two approaches:
(Hope Shane Ross doesn't mind if I report one of his stock answers about a basic way to make a DVD followed by my basic "step by step" use of Compressor in order to give the OP a quick and easy support).
Shane Ross wrote:
+The absolute simplest way to make a DVD using FCP and DVDSP is as follows:+
+1. Export a QT movie, either a reference file or self contained using current settings.+
+2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.+
+3. Select the left blue one and hit delete.+
+4. Now, select the green one, right click on it amd select the top option "first play".+
+5. Now drag your QT from the broswer and drop it on top of the green monitor.+
+6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."+
+7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.+
+THATS ALL!!!+
+NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.+
Gogiangigo wrote:
Creating your MPEG2 and AC3 files with Compressor:
Compressor will create an Mpeg2 of your edited video and an ac3 (dolby stereo) for the audio (You can't create ac3audio with DVDstudio).
(Use google for any farther information about any word or definition that remains slightly unclear to you).
After that is done burning your DVD with DVDStudio will be quicker and easier.
Step 1
Once you are done with the edit you can:
either export it straight from the timeline to Compressor (File>Export>Using Compressor)
or create a QT movie (check self-contained in the export window) and import into Compressor after you open it.
If you export it straight from the timeline Compressor will open automatically,
if you wish to use the self-contained QT movie you can still export it from an open FCP project or open Compressor independently. If the the latter is your case once you open Compressor click on Add File in the toolbar (top left corner ).
In both cases your video will appear in an untitled project right below the toolbar. You can see the movie (or FCP) icon and the title of your project.
Now, the simplest way to proceed is as follow:
you see the text next to the icon of your movie (in the blue rectangle) saying "drag here settings and destinations"? Now go to the settings window below, you can see the settings and destinations tabs. Go to Settings>Apple 4 groups>DVD 10 groups>DVD best quality 90 minutes two settings. This is the most common setting to use.
In a nutshell drag the DVD best quality 90 minutes folder over the "drag settings and destinations here" text. Choose your destination. If you click each setting the inspector window activates. Now before we go ahead I suggest you to read the manual and understand the importance of the inspector window and its functions. In particular read about Avarege bit rate, maximum bit rate and in general Variable frame rate (VBR) and constant frame rate. With regard to audio read about ac3.
This time we leave default settings and proceed by clicking the Submit button.
In the preview window, right below the player commands you can see a little arrow and a date, click on the arrow and you can see that Compressor is encoding your video.
Step 2
When the encoding process is over open DVDstudio.
See the first button of the toolbar , top left? Click on Import Asset, find your encoded audio and video files and open them.
Now since your movie has been already compressed video(Mpeg2) and audio (ac3) they will show in the assets tab below the graphical tab followed by two green lights.
From now follow Shane Ross's steps from point 3 if you don't want a menu.
If you need a menu there's a simple video tutorial that came with FCP studio 2 discs . Take a look at that.
Best,
G.

Please help with itunes store

I am using the monster paradise app. It is a game hwere you can buy cristals to keep on going on the game. But it tells me that I cannot buy anything. But looking in my bank account I see that apple is charging me money for things that i did not buy. Exactly 1.98€ what do I have to do? They do not answer me to any email that i habe sent. Please help
iPhone 5, iOS 6.1.3

You should not leave personal info on a public forum.
everyone here is a user just like you.
You are not addressing Apple here at all.
You need to click Contact Us at the bottom of this page and contact iTunes support.

Please Help with printer issues

I have an iMac intel and with OS 10.8.3. Since the last update about 2 days ago I have not been able to print though the printer is on the same wi-fi as iMac. I have restarted both but to no avail. I deleted all the printers I had to try and add the same printer and the iMac will not list this printer, so I do not have the opportunity to add it. I rely heavilly as this is my liveliihood to be able to scan and print docs. Was this caused by the last update or is there something else going on? Please help!!!

did a copy paste of HP OfficeJet Pro 8500A Plus into google
https://www.google.dk/search?client=opera&q=HP+OfficeJet+Pro+8500A+Plus&sourceid =opera&ie=utf-8&oe=utf-8&channel=suggest
first hit
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=dk&lc=da&dlc=da&tmp_geoLo c=true&product=4116838

Please Help with Itunes/Ipod issue

So I got given an Ipod touch for my birthday and it says i need itunes to use it, so i try to go to apple site to download itunes and the site will not load. I tried both the UK and US sites. Infact I cannot get any page to load up other then the UK sites home page. So this is making it kinda difficult to get itunes and get my ipod working and its **** annoying as i am left with a present i cant use.
I know its not my PC at fault as i have tried other computers and the pages still dont load.
Does anyone know where i can download itunes from or even why the site has not been working for the last week?

yep just tried your link and the page just doesnt load, i have sat here for 5 minutes on the same page waiting for it to load and nothing.
It does the little swirly loading thing in the corner of the tab to say its loading the page but it doesnt actually get there and finish it.
I have tried 3 different browsers on 4 different computers and also asked a friend to try on theirs to see if they can get to it and they cant either, so it cant be the computer, something must be up with the site.

Please help with iTunes download error -50

I have been never been able to download from iTunes and always get the unable to dowload error -50 message. I have seen people have this same question before on here and were able to fix it by adjusting their firewall settings, etc. I am not sure how to do that. I have Norton Internet Security and thought that may be conflicting with it as well. My computer is Windows XP SP2. Can anyone help me fix this? Any specific instructions would be helpful and much appreciated! Thanks!

Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Please help with several issues-Pictures, Videos and More.

I'm on my 3rd iPhone4 in 48 days. A few weeks ago I switched to ATT from Sprint and the EVO because my Company forced me too (they pay for my line). I have a bunch of issues. I won't get into the poor reception and dropped data connection since this is a hardware problem. Ok, when I take pictures and send in an email they don't send straight. Even is I rotate then and save that way when I attach the picture it's not straight. This also happens with video. If I send in a text they are correct. If anyone has tried a Samsung Galaxy S I would like feedback on that too. Probably a long shot in an iPhone forum but I am desperate. I'm not pleased with this phone. I may have to return it.

The ATT rep has visited our work twice. Several us have had issues. He told us we would be able to return our phones even after the 30 days because of all the service tickets open on our phones. If we wanted to move to something else we would just pay the difference. So if I wanted to change to the GalaxyS it wouldn't cost me a thing since it's $199 which I paid for my iPhone. For some reason when I double tap the space bar for a period most of the time it types the letter B. Why is this?

Please help with itunes library

Recently my PC died on me. I have all of my itunes library on an external drive and fortuntately made a copy of the itunes folder under C;\ users\ music, etc. In the past after a major hardware upgrade (ie hard drive) I just replace the C;\ users\ music, etc. with the copy of the iTunes folder and would change the iTunes media folder location to the external drive (G:\iTunes Media\iTunes Media folder) which worked in the past. I thought it had worked but after going through my playlists none of the songs worked! What have I done wrong? I have over 77,000 songs that I have made playlists and genius playlists. The system I had was windows 7 and now using my sons unused pc with Vista.
Please assist me if you can.
Thanks

This is very confussing. As I said, I thought it had worked when I tested just the top three songs in my music library. Wanted to clarify that why I went to the playlists it does not play as well as beyond the few three songs I tested. The original Drive letter was T;\ but when I connected it to my sons pc it was G:\ for some reason. I changed it to T:\ and when I changed the media location to reflect the change it asked me ""Would you like iTunes to move and rename the files in your new iTunes Music folder to match the "Keep iTunes Music folder organized" . I always had keep my itunes organized but the fact that it asked again I wasnt sure what to answer (Yes or No). in anycase, my music playlists did work but found a few that do not or the songs are missing under the playlists. Whats going on here?

Please help with speed issues and powerline adapte...

Hello all,
I have had infinity for a few months now and I am very unhappy with the quality of service so far, I wont go into that however,
the problems I currently have are:
speed dropped from 76.8Mbps down to 34.6Mbps within a week of going live, they have replaced my HH3 twice to try and remedy this but its still the same, anything you can recommend?
as for the powerline adapters, i bought 2 extra when I took out my infinity package, all 4 have failed twice, they have been replaced aswell, received a new set this morning to install and they don't work!
When I set them up I get the green data light and green power light, however once I plug the Ethernet cables in, the data lights go off after around 10sec,
no matter how many times I reset and marry them its the same output, then maybe they will work for around 10-15 minutes and then go off again.
I have 4 adapters in use ATM
2 for vision and 2 for my computer
bt sent me 2 different models for some reason
I have the white simpler networks ones, 2 have black writing and 2 have orange,
sorry for the essay but from the experience I have had from BT so far I am not impressed
thankyou for any help in advance
regards

Ratty2012 wrote:
The 200mbps refers to the theoretical duplex speed and not the actual connection speed. In ideal conditions the actual is about 70 to 80mbps for the 200 adapters. So therefore most of the time in normal conditions they connect at a much lower speed.
That's what I meant, hence why would you get 500Mbps ones if they ain't going to reach unless you're going to have your house wiring upgraded if the speed is rubbish. Didn't mean to be rude xD
If this helped you please click the Star beside my name.
If this answered your question please click "Mark as Accepted Solution" below.

Please help with printing issues...

I used the "Real estate" template for newsletters in Pages '08, and the newsletter looks great, but when I print it out, the top box, the "real estate" box, prints just a blue box...not at all what I am looking at on the screen, everything else is great, and even when I click on preview after print, it looks great, but does not print out the right box...I even printed just the pages template, wondering if I had edited something wrong, but even the pages template does not print the top box as shown...I have also had a difficult time printing out coupons with bar codes on them...I know it is not the printer, as it is shared with a pc, and the coupon and pdf file print fine thru the pc...what am I doing, or is there a setting I have missed?? Thanks so much.

If its a problem printing from program AND Preview, that might imply a system problem, not a program issue. You said it was one of the template files.
Send me an email this weekend (so I can get your email without posting it up here). I will produce a pdf from my machine of the same template and email it back to you. See if that one prints correctly.
If it does, then we eliminated Preview or the printing subsystem as the problem, it is with Pages producing the pdf.
If it still prints bad, then its a system issue.
I see you have printed over and over with different methods, but I don't think I saw if you exported as a pdf and printed that. have you?
Get in touch and we can try it to help narrow down your search of where the problem resides,
Jason

PLEASE HELP WITH ITUNES ISSUE!!!!

Similar Messages

Maybe you are looking for