Please help with J2EE
Hi,
I'm trying to get started writing J2EE applications. I've downloaded the
Mars IDE for J2EE, Java SE 8, MySQL, & Tomcat 6.0. Do I need anything
else to get started?
Also I'm getting lost in the documentation. Can anyone recommend
any simple J2EE getting started tutorials that will work on MARS?
Thanx in advance.
On 07/23/2015 12:36 AM, Ralph Lecessi wrote:
> Hi,
>
> I'm trying to get started writing J2EE applications. I've downloaded the
> Mars IDE for J2EE, Java SE 8, MySQL, & Tomcat 6.0. Do I need anything
> else to get started?
>
> Also I'm getting lost in the documentation. Can anyone recommend
> any simple J2EE getting started tutorials that will work on MARS?
>
> Thanx in advance.
Certainly. The best tutorials I've found are found at
http://www.vogella.de/tutorials
Best of luck to you!
Similar Messages
-
I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.
If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.
-
How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
Please help with proper steps, if any.Also see... these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141 -
Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreekI am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline. -
Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.
Adobe - Lightroom : For Macintosh
Hal -
[ETL]Could you please help with a problem accessing UML stereotype attributes ?
Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank youHi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana -
Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs
Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
Thanks,
Hussein -
Welcome.
At the outset, I'm sorry for my English
Please help with configuration Photoshop CS6 appearance.
How to disable the background of the program so you can see the desktop. (same menus and tools)
i wantto be the same effect as CS5.Please try turning off
Window > Application Frame -
cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?
If you mean updae server
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Otherwise what server are you talking about -
Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work
You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
Regards. -
Please help with slideshow problems!
Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing. Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened". How can I save a
slideshow inprogress and be able to reopen and continue to edit and make slideshow? I want to thank anyone who can help me with this in advance as I
have gotten so frustrated that I want to just scream.
ThanksThanks for the help, thought I had done so but maybe not. Anyway will have another go at it, now may I ask another
question? I am trying to add audio to slideshow. I have some music I purchased thru amazon as mp3 files but I get
message no codec and when I try to add wmv I get same message. What type of file do I need and how can I add
multiple songs to one slideshow. I have one little wmv file that will go in, but it just replicates itself multiple times until
it fills slide show.
Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
Date: Sun, 26 Dec 2010 20:34:32 -0700
From: [email protected]
To: [email protected]
Subject: Please help with slideshow problems!
You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
Now you are most probably using only the Output command: that is what makes the wmv file.
You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
-- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
-- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
-- The 1st entry on that Shortcuts bar is "Save Project"
It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing. Save each Project with a unique name.
After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
Note: you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
> -
Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.
Hello Priyanks,
I found an article with steps you can take to troubleshoot issues with an iPhone not connecting to your car stereo:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?
Following the fix here worked for me:
https://discussions.apple.com/message/15680566#15680566
except my plist file was in ~/Library instead of /Library.
-Scott -
hi, when i am listening music and the screen goes to sleep my music stop playing.Please help with settings
No problem. And no worries, several people have made this same mistake!
Either way enjoy the iPod!
Brock -
Help with J2EE SDK 1.4 Virtual Servers please!
H!
Are we doomed to have just one virtual server pointing to port 80??
I have a Win2K computer with J2EE App Server 1.4. In this computer I stopped the IIS 5.0 in order to use the HTTP Server included with the product. I also run the DNS on the same machine with 3 domains. All name resolutions for these 3 domains work fine.
Now I want to enter to any of the 3 domains freely and execute JSP apps. But I don't want to enter ports numbers like this:
http://www.mytest.com:8081/hello.jsp
I just want to enter:
http://www.mytest.com/hello.jsp
So I defined a new http-port listener pointing to the 80 port on this server. With no SSL support.
Name: http-port80
IP Address: 0.0.0.0
POrt: : 80
Then I defined a new virtual server using the http-port listener. I set the following fields:
ID: mytest
Hosts: www.mytest.com
HTTP Listener: http-port80 (This is the name of the port listener)
Everything seems to be fine. I can enter http://www.mytest.com and call the hello.jsp it's ok.
But then I create a new virtual server for http://www.mytest2.com exactly as the one for the www.mytest.com, except for the host field: http://www.mytest2.com
Then when I restart the app server I got the message on the log: "Port already in use".
I don't want to enter http://www.mytest2.com:<port> but I've read that you cannot assign the same http-listener to 2 virtual servers, so I created another listener pointing to the same port 80. But I still have the same error.
Any ideas how to handle this?
Am I doing something wrong on the configuration?
Thank you very much!!I can help you out with this, because I just solved this problem using the Apache web server 2.0 with mod_proxy and mod_proxy_http.
this is how the configuration works.
setup sunone creating one virtual host for each http-listener on a different port. and make sure these ports are any port except the 80. -- we will configure apache on this port and then use it as a reverse proxy to get to our hosts.
like this
virtual-listener-1 - port 8081
virtual-listener-2 - port 8082
virtual-listener-3 - port 8083
virtual-host-1: www1.domain.com bind to: virtual-listener-1
virtual-host-2: www2.domain.com bind to: virtual-listener-2
virtual-host-3: www3.domain.com bind to: virtual-listener-3
now download apache with all the modules http://www.apache.org
in your httpd.conf add the following lines of code.
#the code below will tell apache to enable the proxy for your host
<IfModule mod_proxy.c>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
ProxyRequests On
<Proxy *>
Order deny,allow
Deny from all
Allow from www1.domain.com
Allow from www2.domain.com
Allow from www3.domain.com
</Proxy>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
ProxyVia On
# End of proxy directives.
</IfModule>
NameVirtualHost *:80
<VirtualHost *:80>
ServerName www1.domain.com
<Location />
Order allow,deny
Allow from all
ProxyPass http://sunoneserver:8081/
</Location>
</VirtualHost>
<VirtualHost *:80>
ServerName www2.domain.com
<Location />
Order allow,deny
Allow from all
ProxyPass http://sunoneserver:8082/
</Location>
</VirtualHost>
<VirtualHost *:80>
ServerName www3.domain.com
<Location />
Order allow,deny
Allow from all
ProxyPass http://sunoneserver:8083/
</Location>
</VirtualHost>
note the sunone server indicates the server where you installed sunone-as (J2EE 1.4). this will give you the result you are looking for: all three of these sites will run on port 80 and each of them will respond to a different web application on sunone.
there are naturally limits because when you run out of ports on your application server this won't work any more but then again there are about 60000 of those free and i don't think you will be able to run that many sites on one server anyway.
Chris.
Maybe you are looking for
-
Hello friends, The Report with tcode S_ahr_61016359 was persent in sap 4.6 c but now this tcode gives the message that this report was deleted use adhoc query instead in version ECC 6.0. can you tell what does this means. Regards, Vidya.
-
View Options - Calculate All Sizes
For some reason, I am not getting any sizes for folders inside one particular folder even though I have calculate all sizes checked. It is not a speed issue. It works on other folders, but I have one folder that it just fails in. If I create a totall
-
Does the font interface in Photoshop show big enough in Windows 7?
Does the font interface in Photoshop show big enough in Windows 7? I purchasde a new Pc with Windows 8, and the Photoshop and Bridge Interface is not readable, it is miniscule, Adobe, Microsoft and DEll cannot fix problem. So I am returning my PC, an
-
"permission" tag in principals.xml
In principals.xml file, there is a <permission name="..." /> tag within <group> tag. What does it mean and how does it affect the security of the application? null
-
i have iphone 4S 16 gb with ios 5.0.1 now i want to update my ios to 5.1.1 i have tried from my phone & itunes both showing message connection error or time out.please advice me what to do now?