Please help with m-audio mobile pre driver not connecting with garageband08

hey i just updated my powerbook G4 with leopard and lost my m-audio (mobile pre) driver in system preferences so i downloaded it b/c i don't have my original disc, the downloaded version shows in my system preferences now but won't appear in the garageband preferences audio/midi input, my only choices are built in mono/sterio. any ideas? besides finding the disc? i'd really appreciate any help as my band is trying to record a cd.

Yeah, the Mobile Pre is not going to work on Leopard until M-Audio updates their drivers, unfortunately.
There is one workaround that I've gotten to work, but it probably won't work for most folks. If you have two partitions on your system, one with Leopard and one with Tiger, you can get the mobile pre to work in Leopard. It's a bit odd, but it does work.
First, boot into you Tiger partition that has the Mobile Pre drivers installed and verify that the system sees and can use the Mobile Pre.
Now, boot into Leopard. Your Leopard system should now see the Mobile Pre and you should be able to use it until you have to reboot the Leopard system.
If you have an external HD with Tiger installed, you might also be able to get this to work w/out having to repartition your system. Just install Tiger on the external HD, boot from it, then install the Mobile Pre drivers.
Hope this helps and possibly provides some temporary relief until M-Audio updates their drivers....

Similar Messages

My Sennheiser MM550-x connected perfectly with iPhone 4s. It does not connect with iPhone 5s bluetoth. Ayone else with this problem?

My Sennheiser MM550-x connected perfectly with iPhone 4s. It does not connect with iPhone 5s bluetoth. Ayone else with this problem?

Hey araho!
Here is an article for you that will help you troubleshoot this Bluetooth issue:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Thanks for using the Apple Support Communities. Have a good one!
-Braden

ASIO problems with M-Audio Mobile Pre

Hi, I am using Adobe Audition 3.0 with an M-Audio Mobile Pre interface.
I know this interface supports ASIO. However, it doesnt register as an ASIO when working with Audition. Hence I am getting some serious latency issues when working with Audition.
How can I fix this?
Thanks

The Mobile Pre works well with Audition when using the ASIO driver from m-audio.com. Unfortunately, I don't think they've released a Vista comaptible ASIO driver, and last time I checked, they didn't intend to. If you're using Windows Vista, you may need to use the ASIO4ALL driver if you want a little better performance then the default DirectSound wrapper provides. You can find this at www.asio4all.com.
Durin

Cannot record with M-Audio "Mobile Pre"?

Just updated to GB 10.0.3 and OS 10.10.1 Now I cannot record tracks using M-Audio "Mobile Pre" USB pre amp interface as I used to. The Pre works fine with Audacity as in the past. Is there a fix for this in Garage Band by any chance? Thanks for any advice.

Did you install the latest drivers?
http://avid.force.com/pkb/articles/en_US/download/MobilePre-Drivers

Funny latency with M-Audio Mobile Pre USB

Hi,
I'm using an M-Audio MobilePre USB interface with Garageband, and I'm 99% certain that GB is doing something funny with latency. I'll record a clip, finish recording, and it'll do some funny compensation where it assumes that there is latency there where there is none, so it shifts the clip left by a few milliseconds (enough to sound sloppy). In every case where I record from the Mobile Pre USB, I find that if I shift the clip right by a few ticks, it'll sound like it did when I was recording it. Is this a known issue, and, if so, is there any way to calibrate it? Otherwise I'm left manually adjusting clips.
Thanks!

Hi there,
As you can see I believe I am having a similar problem except I am using a Fastrack Pro. Hopefully you will get a response that may also help me.
Gord9332
Hi there,
I am new to Mac so bear with me. I have just purchased a Macbook Pro with Logic Express 9. I also purchased an M-Audio Fast Track Pro to connect my instruments. But I have a problem. I can't seem to record anything through the M-audio interface. I ran a test and can record using the internal microphone (which I then turned off).
I have loaded the drivers and the O/S sees it. I check in Logic Express 9 and it sees the interface. In the Mac system preferences it sees the M-Audio USB line input but when you highlight the line it says "the selected device has no input controls". In the Logic Express preferences the Logic software sees the M-Audio device.
Would appreciate any suggestions as to why this is happening. Suspect I am just missing a setting or two.
Macbook Pro Mac OS X (10.6)

Please help... External Hard Drive not mounting

Hello, Please help me if you can:
I have all of my data backed up onto a Seagate External Hard Drive, purchased just a few months ago. I just got a new laptop (MacBook Air) and need to get my data off of my hard drive, but it isn't showing up on my Desktop or Finder. It shows up in Disk Utility, but when I ask it to "repair" it says:
"Invalid B-tree node size
The volume could not be verified completely.
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
The problem started after I added some data to it - I accidentally unplugged the Drive without Ejecting first. The next time I plugged it in it allowed me to view my files but not add anything else to the Drive, and now when I plug it in it doesn't even appear. I am running Lion.
I would be happy to back up the files as it says, but as it doesn't show up anywhere I can't find the files to access. Can anyone help me find a way to get the files off of the disk, or fix the disk so that it is readable?

Hi, Brian, and welcome to the Discussions!
You might perhaps launch System Profiler (from Applications/Utilities) and see if the device is listed there under the FireWire heading in Hardware Overview.
Can you hear the LaCie spin up when powered on?
You might download the free trial version of Data Rescue II and launch it to see if it recognizes the drive. This software often does when DW or Disk Utility won't. If it does, run a scan with it to see if the data on the volume is viewable.
You can test the FireWire port with another Firewire device, or by hooking up to another Mac via a FW cable and trying to boot into FW Target Disk Mode. Visibly check the port at the Mac end first to insure that there are no bent pins at the connector (so you won't damage another device).
You can try resetting a "dead" FireWire port by shutting down, unplugging the external FireWire devices, and disconnecting the Mac's power cord for thirty minutes or so. Before doing this, run Disk Utility's Repair Permissions process on the startup volume first, to see if that corrects it.
Gary
1GHz DP G4 Quicksilver 2002, 400MHz B&W rev.2 G3, Mac SE30 Mac OS X (10.4.5) 5G iPod, Epson 2200 & R300 & LW Select 360 Printers, Epson 3200 Scanner

Please Help:Ipod Classic 30GB Battery going to discharge connection with pc

hi..
Please Help me....I had an Apple Ipod 30gb classic, when i connect my ipod to pc it will automatically discharge itself,but i will charge automatically with direct connection without pc connection..how can i solve my problem...kindly help....my email id: [email protected]
help...

My only guess is that age is playing a factor and that your hard drive is causing you problems. The 30GB came out 2005-2006 so it's been out there quite a while. Maybe a diagnostic visit to the Apple Store can help.

Why is my Seagate portable hard drive not connecting with my LG TV?

Can someone please help me figure out my problem. I recently purchased a Seagate Expansion Portable Hard Drive 2T, 3.0 USB compatible. As I own a MacBook Pro, I formatted it to fit my Mac instead of windows. I have finished downloading all my movies on to it and have connected it into my LG TV usb port but nothing happened. The little green light was on my hard drive indicating it was on and not a broken drive and the TV came up with a prompt saying 'USB Loading.." than immediately after it came up with "Problem on the USB Device. Please check USB". Yes I know the problem is that its formatted to Mac and there for the TV cannot read it. But I don't want to format it to windows for my MacBook doesn't read/write it, (If anyone can help me change that, that would be great!), (as I have another hard drive and it doesn't let me drag movies onto or out of it and only lets me see them,) and the hard drive will be rather useless, Plus I'm using Time Machine and I want to keep a BACK UP of my Mac on a partition of my hard drive (Which I have already done).
Please & Thank You,
Jaycee

Templeton Peck:
Well yes I know the problem to why it won't connect to my TV (the hard drive is Mac formatted) but I'm hoping someone would have a SOLUTION to the fact that I want it to stay in Mac format AND also somehow work with my tv (If thats even possible?..probably not) OR I can maybe change the format back AND hopefully can get it compatible with my Mac (Can that even be done too? Maybe download some prgram?) so I can still copy/past stuff off of it ---> Which by the way, I'm hopping also someone might have that solution too (Which I stated mildly up the top).
Also, I posted this up for the reason of which I would expect the people who read these know a little something about Mac/Apple Products (not necessarily about Mac formating but anything else really), So this question is technically about my MacBook for which my hard drive is MAC FORMATTED and that maybe theres a way for my MacBook to copy/past from my old hard drive which ISN'T Mac formatted (In saying that, I can just reformat my new one back IF there is a way for me to still copy/paste stuff off of it onto my MacBook).
So yea, I think this does has something to do with my Mac.
- Jaycee

My iPhone 4S will not connect with my Windows 8 pc, I have tried everything! Can someone helpe me!, My iPhone 4S will not connect with my Windows 8 pc, I have tried everything! Can someone helpe me!

I don't what happen, but when I got my new computer with the Windows 8 it synched my 4S just fine. Now it keeps saying that the "USB device not recognized." And it won't even connect with itunes.

Try the suggestions here > iOS: Device not recognized in iTunes for OS X
If nothing helped, repair permissions.
Disconnect the iPhone.
On your Mac open Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Then select: Repair Disk Permissions
This process can take a few minutes.
When it's done, restart your Mac and connect the iPhone.
If that doesn't help, reset the PRAM > About NVRAM and PRAM

Ipad not connect with computer. error number (0xE8000084), ipad not connect with computer error number (0xE8000084)

ipad not connected to computer. erreo number (0xE8000084)

Hello Mohamed Abdo,
It sounds like you are unable to connect your iPad to the computer because you get this error code when you try. I would use the troubleshooting for these types of errors from the following article:
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/TS3221
Start with these steps, and there are additional steps in the article if you need them:
1. Restart your computer.
2. Install the latest version of iTunes.
3. Verify that your computer meets the minimum system requirements. iOS devices require the following minimum version of Windows:
Windows XP Service Pack 3
Windows Vista
Windows 7
Windows 8
4. Download and install any available software updates from Microsoft.
5. Connect the device directly to your computer; not to an external USB hub. Find out if your computer has USB 2.0 ports.
6. Check that the Dock Connector or Lightning Connector on both the device and cable are clean of any lint or other debris. If possible, connect your device using a different Apple 30-pin to USB cable or Apple Lightning Connector to USB cable.
7. Disconnect other USB peripherals from your computer, with the exception of your keyboard and mouse. After disconnecting these peripherals, restart your computer, connect your device, and open iTunes.
8. Connect your device to a different USB port on your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling

My Iphone calendar connects with my wifes calendar but does not connect with my ipadmini

My Iphone calendar will connect with my wife's ipad calendar but I cannot get it to connect to my new ipad mini calendar. What to do?

My experience with hotel wifi is that it's an open, and unsecured, connection, but unless you agree to their terms on a launch page, you can't go any further or connect. Sometimes I need to force safari to come up and even make it go to a page, to trigger the auto load of the 'agree to our terms' page.
Unless your machine is work provided so maybe could be blocked from unsecured net access?

How can i go on internet if no wifi please help- just says cannot open page as not connected to internet plese help!!

need help with how you can look up pages when no wifi is available?

- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router.
- Reset network settings on the iPod: Settings>General>Reset>Reset Network settings
- The troubleshjooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

Please help me! Ipod plugged in but not connected

I plugged in my ipod and when I went to update it after adding songs, according to my preferences no ipod was connected. So, I could not update. I checked the cord, tried another port, restarted my PC. Everything else I try to do, I can't because it tells me to connect my ipod when it already is! It charges but is "not connected". What could be wrong? Thanks!

You should all try the latest updater (2006-06-28)
http://www.apple.com/ipod/download
Windows users: If you are not able to restore the iPod, you can try to format it:
Open Control Panel
Click the "switch to classic view" link, if necessary
Double click "administrative tools"
Double click "computer management"
Under "storage" click on "disk management"
Find your iPod's listing
Right-click on it and click "format"
Select "FAT32" and start the format
Once it completes, you should probably restore the iPod anyway.
If you're on a Mac and have not been able to restore the iPod, you can use your Disk Utility to format it.
CG

Hp recovery on laptop gives error message "destination drive not connected"

I'm trying to carry out factory reset on my 2012 G6 laptop product code B2Y48EA*ABU serial no. [Personal Information Removed] to factory settings using set of 5 recovery discs
I followed the procedure shown here (although the screen messages are slightly different)
http://support.hp.com/gb-en/document/c01867418
I started the laptop with disc 1 in the dvd drive and the hp program was displayed. I selected "factory reset" and followed promts
When the 4 th disc is in dvd drive and the process is about53% compltete it stops with the error message
"destination drive not connected"
and fails
Earlier the recovery manager reported that the partion on the hard drive had been re-forrmatted so the drive was connected then!
All help and suggestions appreciated

Hi there @Teka,
I understand that you are having trouble with a System Recovery to a factory image using recovery disks. I am happy to help you with this.
Are those five disks a set that you created using the recovery manager, or is it a set you ordered from HP?
Is there any sign of damage, scratches or smudges on the disk it fails on?
Have you tried cleaning the DVD drive?
Also take a look through these pages, in particular the troubleshooting page, and see if anything there is of use.
Performing an HP System Recovery (Windows 7)
Troubleshooting HP System Recovery Problems (Windows 7)
Let me know how it goes for you.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback.

I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback. I tried different input and output settings but it didn't help. Any help will be appreciated.

Hear your microphone or instrument as you play and record (monitoring)
You can hear, or monitor, input from an instrument or microphone in GarageBand while you play and record. When you turn on monitoring for a track, you hear the musical instrument or microphone connected to the track’s input. Monitoring lets you hear yourself play so that you can hear the part you want to record as well as the rest of the project.
You can turn on monitoring for a Real Instrument track or Electric Guitartrack from the track’s header, or in the Track Info pane. Electric Guitar tracks always show their monitoring buttons, and you can show monitoring buttons for Real Instrument tracks using a menu command. You can use monitoring with feedback protection to avoid feedback while you play.
Hide
To turn on monitoring in the track header:
Choose Track > “Show Monitoring for Real Instrument Tracks.”Monitor buttons appear in the headers of Real Instrument tracks. On tracks with monitoring turned on, the button lights yellow.
Click the Monitor button in the header of the track you want to use.
HideTo turn on monitoring in the Track Info pane:
Double-click the header of the Real Instrument or Electric Guitar track you want to turn on monitoring for.The Track Info pane opens.
From the Monitor pop-up menu, choose one of the following:
Choose Off to turn off monitoring. You can hear your instrument only while you record.
Choose On to turn on monitoring and protect against feedback.
Choose On (no feedback protection) to turn on monitoring without feedback protection. If the input level is too high, it may cause feedback (especially if you are using a microphone and listening to your project through your computer speakers).
For an Electric Guitar track, you can view the Monitor pop-up menu by clicking Edit, and then clicking the back side of the amp. The Monitor pop-up menu appears with the input controls below the stage.
You should usually turn off monitoring when you are not playing or singing. When monitoring is turned on, your computer can pick up output from your speakers or monitors, causing unwanted feedback. Using headphones rather than speakers to listen to your projects can help eliminate feedback.
If you select your computer’s built-in microphone as the audio input, in the Audio/MIDI pane of GarageBand preferences, monitoring is turned off for all Electric Guitar tracks to avoid unwanted noise.
SEE ALSO
If you don’t hear sound from a Real Instrument
Was this page helpful?Send feedback.
© 2010 Apple Inc. All rights reserved.

Please help with m-audio mobile pre driver not connecting with garageband08

Similar Messages

Maybe you are looking for