Please help with msi k9a2 platnium
ok well i just finished building my rig.
its a Antec 900 case
2x 80 gb 7,200 rpm sata HDD
1x 720gb 7,200 rpm sata HDD
ATI hd 4870
AMD Phenom x4 9950
Thermaltake Water Cooler
CORSAIR Dominator 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
corsair 750 watts crossfire support
ok well i put it all together.
my power works and motherboard is all lighted up.
VGA has 3 red lights( means its workin)
all fans are up, leds are workin.
ok then when i switch on my power supply. before i turn on the system.
in the middle of my motherboard, i see a yellow led light. its small. i dun think its bad. so i continue.
i connect my screen keyboard and mouse. btw screen is new and tested. ( it works)
i turn on comp. Fan turns on, water cooler works, and lights flash.
then all of a sudden, nothing shows up on my screen. its blank. it says there is no signal. i checked my video card. everything is fine with it.
i check my ram and its all fine.
oh btw my motherboard is k9a2 platnium. and i see in the middle where the model is. its version 1.0
do i have to flash my bios?
if so how do i? cause i dun have a screen. and nothing will show up on my computer.
can someone tell me how to flash so that my phenom 9950 will work i think thats the reason or can someone help me. cause msi never picks up their technical support. ( its horrible) so help me plz. Thanks
Tam
Quote from: tamngoman on 16-August-08, 10:54:13
um i dunno where that pin is. where am i suppose to find it from? am i suppose to have it?
cause i connected the 4 pin on the bottom of it ( next to the audio ports)
Yes, its "tricky" a bit
Find and connect EPS/ATX12V 8-4 pin cable for the CPU. But deattach it 1st: /* Its 8pin, one piece by default */
Once done plug it to JPWR1:
Quote from: tamngoman on 16-August-08, 12:10:07
ok and that should fix the problem with the booting?
Yes, you can't boot without it.
Similar Messages
-
Something wrong with msi k9a2 platnium board
ok i built everything and its fine. it boots up. but when i try to install os.
it never detects my drives.
i have a dvd-cd drive.
someone help.
or give me their setup for biosRead >>Posting Guide<<
-
So I booted my computer one day and found something very odd. Rivatuner & Everest reports the GPU clocks at...
Core clock / geometric domain: 275.40 MHz
Core clock / shader domain: 275.40 MHz
Core clock / ROP domain: 275.40 MHz
Memory Clock: 405.00 MHz.
Default clocks for this card is...
Core: 650 MHZ
Mem: 800 MHz
...and has been running so for a year before today.
I tried running 3dMark06 to see if it would change clocks when it entered 3d mode, however, the clocks remain, resulting in a significant decrease in FPS
Therefore, I attempted to manually configure the clocks using ATI Tool only to come across this message when executing the program...
Currently I am running Windows Vista 32bit.
Can anyone give me an idea as to what might be the possible cause of this problem?
Bad GPU?
Bad Motherboard?
Bad PSU?
Bad Vista?
Any and all help will be greatly appreciated. Thank YouQuote from: ANewPrelusion on 11-October-07, 14:05:30
I shut down my computer. Changed 3 fans. One on the rear chassis and 2 on the GeminII CPU cooler.
Booted up the computer...and that's when i "noticed" the change. Not quite sure if the problem was present before I changed the fans.
I will try a fresh XP install tomorrow. Meant to do it today, but work got in the way.
Check VGA power cable, it could be pulled out accidental and cause decrease in GPU freq. when its running lag of power. -
I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.
If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.
-
How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
Please help with proper steps, if any.Also see... these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141 -
Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreekI am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline. -
Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.
Adobe - Lightroom : For Macintosh
Hal -
[ETL]Could you please help with a problem accessing UML stereotype attributes ?
Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank youHi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana -
Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs
Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
Thanks,
Hussein -
Welcome.
At the outset, I'm sorry for my English
Please help with configuration Photoshop CS6 appearance.
How to disable the background of the program so you can see the desktop. (same menus and tools)
i wantto be the same effect as CS5.Please try turning off
Window > Application Frame -
cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?
If you mean updae server
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Otherwise what server are you talking about -
Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work
You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
Regards. -
MOVED: Need help with msi mega 180 + athlon xp-m combo
This topic has been moved to Overclockers & Modding Corner.
Need help with msi mega 180 + athlon xp-m comboAFAIK, you shouldn't need a pinmod for a Mobile Athlon XP CPU to work in a nforce2 mobo
did you have any other CPU installed prior to this one? if so, refer here to clear the CMOS: Clear CMOS Guide
next, refer to your manual, or download from MSI, for location of the FSB jumpers; ensure J8 is shorted across pins 1-2, and J7 is shorted
finally, enter your BIOS setup menu, and under Advanced Chipset Features, set CPU FSB to 133mhz (or even 166mhz if you have DDR333 memory). the only thing i can't see in the Mega 180 manual is where you set the multiplier...
which is where the BIOS has limited overclocking features, and you might have a problem here
i think i'll pass this over to the Overclockers forum, where someone may be able to give a better answer.... -
Please help with slideshow problems!
Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing. Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened". How can I save a
slideshow inprogress and be able to reopen and continue to edit and make slideshow? I want to thank anyone who can help me with this in advance as I
have gotten so frustrated that I want to just scream.
ThanksThanks for the help, thought I had done so but maybe not. Anyway will have another go at it, now may I ask another
question? I am trying to add audio to slideshow. I have some music I purchased thru amazon as mp3 files but I get
message no codec and when I try to add wmv I get same message. What type of file do I need and how can I add
multiple songs to one slideshow. I have one little wmv file that will go in, but it just replicates itself multiple times until
it fills slide show.
Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
Date: Sun, 26 Dec 2010 20:34:32 -0700
From: [email protected]
To: [email protected]
Subject: Please help with slideshow problems!
You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
Now you are most probably using only the Output command: that is what makes the wmv file.
You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
-- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
-- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
-- The 1st entry on that Shortcuts bar is "Save Project"
It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing. Save each Project with a unique name.
After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
Note: you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
> -
Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.
Hello Priyanks,
I found an article with steps you can take to troubleshoot issues with an iPhone not connecting to your car stereo:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Thank you for using Apple Support Communities.
Best,
Sheila M.
Maybe you are looking for
-
Getting blank screen when i try to open workspace first time
Hi All, I have installed hyperion 11.1.2.2 version with Oracle 11.2.0.1 database. Installation and configuration completed successfully. Operating System: Windows Server 2008 64 bit When i try to open workspace, it is showing blank page in the IE 10
-
In a page-detail table report, there are several numeric fields which must be totalled at the end of the report. Some of the fields are calculated ones, i.e. a dollar amount multiplied by a conversion rate. The total of the calculated fields are alwa
-
Error in User Administration page-(Search Users)
Hello, We are geting a portal runtime error as follws when we click on User Administration -> Users -> search Users <b>Portal Runtime Error An exception occurred while processing a request for : iView : pcd:portal_content/administrator/super_admin/su
-
MP really heats up in target disk mode
I understand that, since my computer is not controlled by OS when in Target Disk Mode, the fans will run to prevent overheating. What I don't understand is, why does the machine actually start running so hot, when I'm not engaging the RAM, processors
-
Has anyone downloaded any video podcast to iphone and get only the audio?
Hey, I downloaded few video podcasts. I had turned on Music Video, Podcast and Video syncs. But I see only the first frame of the video podcast and I can only hear the audio... no video... Has anyone faced the same problem and has anyone been able to