PLEASE help with multi-cam edit issue (head about to explode...)
PLEASE believe me when I say I've watched 20 YouTube videos on the subject, read the manual, reinstalled FCS on a new machine (in the event that the install or my last MBP was at fault), etc., etc....
JUST can't get FCP to make the cuts for me when I click on the angles in the viewer.
Despite making a multi-clip, open synch, green/blue boarder for audio/video angle and blue boxes for video only, rendering, etc., the same thing always happens...
When I hit the space-bar, making all the angles play @ same time in the browser, and then I click on an angle to make a real-time cut, the in-point of the selected angle pops onto the canvas (a still frame) and everything STOPS.
Happy to describe any other details; can begin to tell you how stoked I'll be if I can get past this...
(I've been reduced to trying to use iMovie to cut this 3 angle live-music performance video, which is taking HOURS for a single song...with terrible results...)
:-/
Starting over:
1) Import 3 .dv clips (all same frame size, vid rate, compression, etc.)
2) Create new bin for footage, assign angle numbers to clips
2) Add in-point for synchronization
3) Make multiclip (and synch in-points)
4) Double-click on multiclip (and it then shows in viewer)
5) Press "overwrite" to bring multiclip into timeline
6) Open playhead sync
7) Assign blue and green 'boxes' in viewer (audio/video, and video only)
8) Click into timeline, make sure playhead is to the front of the sequence
9) hit space bar to start editing.
10) NOW, whenever I click on an angle in the viewer to make an edit, playback stops and a still frame for the selected angle shows in the canvas.
ANY THOUGHTS??
Similar Messages
-
Need help with Multi-cam editing in Premiere Pro CC/7.0
I've been using 6.0 for a while now, and had to install 7.0/cc, but now I can't find where to record multi-cam edits. I've already lined up my clips and created a new sequence and enabled multi-cam, I just don't see the Multi-Cam Editor. Please help!
Hey!
I found the record-button in the programm panel. But now it won't let me hit record. The button is disabled (see screenshot).
What can I do about it?
If I just hit play and then change the angles in the source window, Premiere won't record those edits. Only thing it does is it keeps the whole clip in this one angle. -
Help with multi camera editing in Premiere Pro
Ok I'm new...so bear with me.
I am editing a basic interview shot on two cameras and cutting away to some still images.
The rushes are 4 lots of film about 10 mins in length.
I inputted the footage from the two cameras and created a new sequence for each using the multi camera audio synchronisation method (which worked great).
So how do I go about creating my edit? Something tells me I'm going about it in the wrong way.
Do I need to create my edit using single camera shots and then create multi camera sequences for each individual clip? It seems so laborious as its all already synced up for two cameras.
I am a bit confused about creating clips v creating sequences.
I'm sorry if this is making some of you cringe :/ ....but I really can't find any help in online tutorials.
I need basic step by step instruction.I am editing a basic interview shot on two cameras and cutting away to some still images.
The rushes are 4 lots of film about 10 mins in length.
I inputted the footage from the two cameras and created a new sequence for each using the multi camera audio synchronisation method (which worked great).
So how do I go about creating my edit? Something tells me I'm going about it in the wrong way.
Do I need to create my edit using single camera shots and then create multi camera sequences for each individual clip? It seems so laborious as its all already synced up for two cameras.
humm, sounds like your 4 lots do not overlap in time, and that there is space between each lot. So would that be 4 multi-camera sequences with the two cameras?
If so, why even multicamera edit that? and just set up to Video tracks, sync the audio and opacity keyframe between the two tracks.
Good to get your multi-camera edit workflow going proper though.
Sounds like you need to multi-camera edit your 4 sequences separately, unless you sync each lot with its corresponding clip and put on the same timeline, then do one sequence and one multi-camera edit -
Multi-cam edit issues with multiple DSLR clips
Hello,
Working in CC. I have 2 camera angles that were filmed with 2 DSLRs, and mic'd audio that was recorded into a Zoom H4N. Audio recording never stopped, but due to the nature of DSLRs, the 2 cameras would stop recording every 12 +/- minutes. In this end, I have:
Camera 1 - 16 clips
Camera 2 - 17 clips
Zoom H4N - 1 track
When using the multi-cam source sequence option, it understandably thinks each clip is a new camera/angle. However, that's not very helpful for me when I have 17 angles (15 of which are blank) showing up in the program monitor. Any suggestions on how to better tackle this dilemma?
Thank You.Thanks, Mark. Appreciate the quick response. After messing around, I combined your method with PluralEyes (seemed less tedious that syncing 17 clips manually). There might be a faster/easier way, but this is what I did, in case any one is curious (sounds more tedious than it actual is):
1. Select cam 1 clip 1, cam 2 clip 1 and external audio in the Browser.
2. Left-click, "create Multi-Camera Source Sequence." Two angles and audio are now in a multi-cam sequence. Rename as Multicam_Source_Sequence
3. Create new sequence, called Sequence_01 and open in timeline.
3. Excluding cam 1 clip 1 and cam 2 clip 1, drag all remaining clips of cam 1 to V1, all remaining cam 2 clips to V2, and single external audio to A3 into Sequence_01 timeline.
4. Launch Sequence_01 into PluralEyes 3. Sync and Export.
5. Open PluralEyes' "Sequence_01_synced" (not "Sequence_01_synced Replaced") in timeline.
6. Find a good marker point toward the beginning of the audio where it has synced cam 1 clip 2 and cam 2 clip 2. Cut at that point.
7. Copy all video tracks (exclude audio tracks).
8. Find Multicam_Source_Sequence and open in timeline (un-nested, so that all tracks are revealed).
9. Manually find the same audio marker point where you cut in Sequence_01_synced. Place playhead directly at cut point.
10. Paste video clips. All tracks are now synced in a multi-cam sequence.
From here, it's the usual steps for preparing multi-cam editing, like you mentioned.
11. Create new sequence, called Multicam_Working_Sequence. Open in timeline.
12. Make sure nesting button is turned on in timeline.
13. Drag Multicam_Source_Sequence into Multicam_Working_Sequence.
14. Right-click the nested sequence>Multi-Camera>Enable.
15. Enable Multi-camera view in Program Monitor's panel menu.
Voila! Took me awhile, but this works.And no 17 angles popping up in the program monitor. Let me know if you'd add (or remove) anything. Thanks, again! -
Novice needs help with multi-cam
Hi, I've got 3 cameras and a seperate audio track synched in my timeline. (CC Premiere Pro 6 on a PC with - unfortunately, Windows 8) The cameras didn't all start at the same time but no problem the clips are where they need to be now. I've made several edits getting rid of stuff I don't need, and I've added a title, end note, and a few stills. All the tutorials I've watched deal with starting clips at the beginning but I can't seem to find one that shows what to do with a bunch of things already in the timeline where they need to be. Here's a screen shot if that helps to explain what I've done so far.I've tried nesting the clips and dragging that into the source panel, but no luck. Obviously, I'm missing something here (this is my very first project) hope someone can help.
Yes, what Jim said...
or if you really want to leave all your little stills and titles there and not have to add them later then alt+select all the video clips only and right click>nest. You can select all the audio clips too but I usually leave them there so I can see them all individually (personal preference) and I never have audio follow video in my edits so it's not necessary. Then right click>Multicam>Enable and proceed with #3 from Jim's list. I actually prefer to ignore the wrench and add that one touch little multicam toggle icon to the program monitor which it appears you've already done so you just need to select the far right icon on the bottom of your program window next to the little camera icon. That's the multicam toggle. Multicam cutting now takes place in the Program Window instead of the Source Window like it was in CS6. Oh also, the little "tweaks" that Jim mentioned can be easily done with the Rolling Edit Tool (Shortcut: N) You'll see. Good luck! -
Please help with an urgent purchase issue
Hello all
I have finally decided that since I am planning a trip to US it would be a wonderful opportunity to purchase a Mac and fulfill my dream!
Despite the fact that I was thinking of purchasing an iMac for a desktop computer (my office laptop is a windows 8) I ended up in selecting a MacBook Pro 15 retina as a desktop replacement combining increased portability and enhanced specifications. The use is strictly personal meaning transferring and listening to music, home movies editing, watching movies, Internet and generally transferring all my home staff to apple ecosystem using also external drives.
Now the serious staff: since I have a one time opportunity ( the trip is not repetitive) I would extremely appreciate your help in the following:
- my current selection is with 2,7 ghz quad core i7 with 8 gb ram and 512 flash. How is this configuration compared to the basic one? Basically I chose the 2.7 because of the relatively small price difference and the increased hard drives because of future programs installations (all storage will be done in time capsule and external drives)
- since I have to purchase it now when Mavericks are released will the update require payment (based on your experience from the past)
- how do the above compare to the new MacBook Air (if it is worthwhile I would go to an enhanced version of the 13")
My true apologies for the length of my message but any help is invaluable to solve my confusion
Many thanks in advance.- my current selection is with 2,7 ghz quad core i7 with 8 gb ram and 512 flash. How is this configuration compared to the basic one? Basically I chose the 2.7 because of the relatively small price difference and the increased hard drives because of future programs installations (all storage will be done in time capsule and external drives)
- since I have to purchase it now when Mavericks are released will the update require payment (based on your experience from the past)
- how do the above compare to the new MacBook Air (if it is worthwhile I would go to an enhanced version of the 13")
My true apologies for the length of my message but any help is invaluable to solve my confusion
Many thanks in advance.
We do not know yet what Mavericks will cost or what machines Apple will update for free but based on past experience it will probably not be a free update unless you purchase the computer after Mavericks has been released to the public. As recent operating system upgrades have been relatively inexpensive - Mountain Lion was $20 - I wouldn't worry a lot about this.
I agree with your choice of the 512GB SSD. The bigger the better as application files and data are only going to get larger. The faster processor may not make enough difference for your intended uses to make it worth the extra money however.
The retina display on the MacBook Pro is quite a bit better than the MacBook Air.
Best of luck. -
Routing Experts please help with below LAN routing issue with NAT
Hello Experts,
I have a weird situation and requirement.
The existing setup is -
We have email/ticketing server hosted in the LAN which is reachable on the publicly NAT'ed IP with respective port numbers of 89 & 443. We have LAN & servers on the same subnet. The internet is with public DHCP IP assigned by ISP (/29). We use linksys router GUI for NAT settings (attached).We are using the same public IP for the server NAT & user NAT.
We tried to refresh our network by separating the subnets for LAN users & servers. We used the Cisco 3845 router to create sub-interfaces in the LAN and configure respective subnets. Now both user subnet and server subnet are connecting to the Internet with same public IP (static NAT for servers & dynamic for users). We can connect to the server IP from the Internet and it resolves fine. However user LAN subnet cannot connect to the server if we try the URL. Users can access the Internet fine.
Please find attached short diagram and below configuration and please give your inputs to solve this.
Cisco 3845 router
access-list 1 permit 10.155.60.0 0.0.0.255
access-list 2 permit 10.155.61.0 0.0.0.255
access-list 3 permit 10.155.62.0 0.0.0.255
ip nat inside source list 1 int g0/0 overload
ip nat inside source list 2 int g0/0 overload
ip nat inside source list 3 int g0/0 overload
int g0/0
ip add 8.8.8.8 255.255.255.248
ip nat outside
no shut
int g0/1
description Trunk-to-Switch
no shut
int g0/1.60
description User vlan
ip add 10.155.60.1 255.255.255.0
encapsulation dot1q 60
ip nat inside
int g0/1.62
description Server vlan
ip add 10.155.62.1 255.255.255.0
encapsulation dot1q 62
ip nat inside
exit
aaa new-model
aaa authentication login default local
aaa authentication login vpn_xauth_ml_1 local
aaa authentication login sslvpn local
aaa authorization network vpn_group_ml_1 local
aaa session-id common
acl 120
max-users 10
exit
!access-list 120 remark ==[Cisco VPN Users]==
access-list 120 permit ip any host 192.168.0.10
access-list 120 permit ip any host 192.168.0.11
access-list 120 permit ip any host 192.168.0.12
access-list 120 permit ip any host 192.168.0.13
access-list 120 permit ip any host 192.168.0.14
access-list 120 permit ip any host 192.168.0.15
access-list 120 permit ip any host 192.168.0.16
access-list 120 permit ip any host 192.168.0.17
access-list 120 permit ip any host 192.168.0.18
access-list 120 permit ip any host 192.168.0.19
no access-list 100
access-list 100 remark [Deny NAT for VPN Clients]=-
access-list 100 deny ip 192.168.0.0 0.0.0.255 host 192.168.0.10
access-list 100 deny ip 192.168.0.0 0.0.0.255 host 192.168.0.11
access-list 100 deny ip 192.168.0.0 0.0.0.255 host 192.168.0.12
access-list 100 deny ip 192.168.0.0 0.0.0.255 host 192.168.0.13
access-list 100 deny ip 192.168.0.0 0.0.0.255 host 192.168.0.14
access-list 100 deny ip 192.168.0.0 0.0.0.255 host 192.168.0.15
access-list 100 deny ip 192.168.0.0 0.0.0.255 host 192.168.0.16
access-list 100 deny ip 192.168.0.0 0.0.0.255 host 192.168.0.17
access-list 100 deny ip 192.168.0.0 0.0.0.255 host 192.168.0.18
access-list 100 deny ip 192.168.0.0 0.0.0.255 host 192.168.0.19
access-list 100 remark
access-list 100 remark -=[Internet NAT Service]=-
access-list 100 permit ip 192.168.0.0 0.0.0.255 any
exit
ip nat inside source static tcp 10.155.62.55 21 8.8.8.8 21
ip nat inside source static tcp 10.155.62.55 88 8.8.8.8 88
ip nat inside source static udp 10.155.62.55 88 8.8.8.8 88
ip nat inside source static tcp 10.155.62.84 3389 8.8.8.8 3389
ip nat inside source static udp 10.155.62.84 3389 8.8.8.8 3389
ip nat inside source static tcp 10.155.62.98 80 8.8.8.8 80
ip nat inside source static udp 10.155.62.98 80 8.8.8.8 80
ip nat inside source static tcp 10.155.62.98 443 8.8.8.8 443
ip nat inside source static udp 10.155.62.98 443 8.8.8.8 443
ip nat inside source static tcp 10.155.62.98 25 8.8.8.8 25
ip nat inside source static udp 10.155.62.98 25 8.8.8.8 25
ip nat inside source static tcp 10.155.62.84 8080 8.8.8.8 89
ip nat inside source static udp 10.155.62.84 8080 8.8.8.8 89
ip nat inside source static tcp 10.155.62.84 9005 8.8.8.8 9005
ip nat inside source static udp 10.155.62.84 9005 8.8.8.8 9005
ip nat inside source static tcp 10.155.62.84 135 8.8.8.8 135
ip nat inside source static udp 10.155.62.84 135 8.8.8.8 135
ip nat inside source static tcp 10.155.62.84 139 8.8.8.8 139
ip nat inside source static udp 10.155.62.84 139 8.8.8.8 139
ip nat inside source static tcp 10.155.62.84 445 8.8.8.8 445
ip nat inside source static udp 10.155.62.84 445 8.8.8.8 445
ip nat inside source static tcp 10.155.62.84 90 8.8.8.8 465
ip nat inside source static udp 10.155.62.84 90 8.8.8.8 465
ip nat inside source static tcp 10.155.62.143 3381 8.8.8.8 3381
ip nat inside source static udp 10.155.62.143 3381 8.8.8.8 3381
ip nat inside source static tcp 10.155.62.46 8081 8.8.8.8 91
ip nat inside source static udp 10.155.62.46 8081 8.8.8.8 91
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:/cme-gui-7.1.0.1
file privilege 0
telephony-service
dn-webedit
time-webedit
transport input ssh
line con 0
line vty 0 15
login local
ntp server ntp.first2know.net
clock timezone gmt 0
clock summer-time BST recurring last Sun Mar 1:00 last Sun Oct 2:00
ntp update-calendar
ntp master
=========================================================================================================================================
Cisco 3750 Config;
vlan 60
name User
vlan 61
name Voice
vlan 62
name Server
exit
interface g1/0/1
description Trunk-to-Router
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast trunk
interface vlan 60
description User Vlan
ip add 10.155.60.2 255.255.255.0
interface vlan 61
description Voice Vlan
ip add 10.155.61.2 255.255.255.0
interface vlan 62
description Server Vlan
ip add 10.155.62.2 255.255.255.0
service dhcp
ip dhcp pool Users
network 10.155.60.0 255.255.255.0
default-router 10.155.60.1
dns server 4.2.2.2
ip dhcp pool Voice
network 10.155.61.0 255.255.255.0
dns server 4.2.2.2
exit
ip dhcp excluded-address 10.155.60.1 10.155.60.2 10.155.60.3
ip dhcp excluded-address 10.155.61.1 10.155.61.2
interface range g1/0/2 - 1/0/21
switchport mode access
switchport access vlan 60
switchport access vlan 61
exit
exit
interface range g1/0/22 - 1/0/26
switchport mode access
switchport access vlan 62
exit
Thanks,
DeepakOne more thing I should clarify the route I am putting into the 10.10.1.9 server is
route add 10.1.6.0 mask 255.255.255.0 10.10.1.250 which tells the server to bypass the ASA and go directly to the ISP router.(then i can successfully tracert everything). The big question here is how to make the inside ASA connection 10.10.1.1 to force all traffic to 10.10.1.250.
Thanks in advance. -
OMG Please help with Win XP partition issue FAT32 NTFS
I know that there are other posts about this, but I have not been able to find the answers to my problems
I had the issue that others had with not getting the option to format the bootcamp partition during my XP Pro install. I used the FreeDOS solution to format the drive, but I am now left with an 80gb FAT32 partition which is not really what I wanted.
Reading other posts, resizing the partition does not seem to be an option. I guess that I use Winclone to backup my XP partition, wipe out the partition using Bootcamp, but where do I go from here????
A couple of questions:
1) Can a backup of a FAT32 partition be restored to an NTFS partition?
2) How the bl**dy **** do I format the bootcamp partition as NTFS if I do not get the option of formatting during the XP install and FreeDOS wants to format as FAT32.
By the way if anyone has the answer that involves not having to wipe the FAT32 partition but shrink / reduce it to say 15gb and allow me to create a 65gb NTFS partition - there is a big sloppy kiss waiting!!!!
I was hoping that I could just use something like Partition Magic within my 80gb bootcamp partition to resize the FAT32 then create and format the NTFS partition?
Sorry for babbling and thanks for reading and hopfully ending my pain.
Ian.I have found this http://support.microsoft.com/kb/307881 that allows the conversion of a FAT32 partition to NTFS. . . . looks like I will give this a go tonight.
Ian. -
Please help with on going KP issue.
Hello to everyone and thanks in advance for any assistance and advice.
I bought my 2011 i5 IMAC last year. After about 6 months it wouldn't work, apple said the RAM had gone bad and over nighted me 2 new sticks. Problem solved. Till about 3 weeks ago (6 mo after apple sent the new memory). Same thing happened, this time i just ordered some from Amazon (corsair) and the problem was solved. Till Monday. Not sure whats going on now. Same thing only this time new memory didn't help.
I've disconnected all external sources, flashed the PRAM, and I guess did a recovery install because now it says installing OS X. Luckily everything is backed up on an external through time machine.
Below are some of the logs
Tue Sep 11 16:41:06 2012
Machine-check capabilities (cpu 0) 0x0000000000000c09:
family: 6 model: 42 stepping: 7 microcode: 26
Intel(R) Core(TM) i5-2400S CPU @ 2.50GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC6_ADDR(0x41a): 0x0000000112bd3300
IA32_MC6_MISC(0x41b): 0x000004936e028086
IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
Package 0 logged:
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
panic(cpu 1 caller 0xffffff80002c4d65): "Machine Check at 0xffffff7f81c4d436, registersn" "CR0: 0x000000008001003b, CR2: 0x00000007faef68e8, CR3: 0x000000001df7e058, CR4: 0x00000000000606e0\n" "RAX: 0x0000000000000020, RBX: 0x0000000000000000, RCX: 0x0000000000000001, RDX: 0x0000000000000000\n" "RSP: 0xffffff80efe63850, RBP: 0xffffff80efe63880, RSI: 0x0000000000000006, RDI: 0xffffff801213e800\n" "R8: 0xffffff8011d8c800, R9: 0x0000000000000000, R10: 0x800000001df7e058, R11: 0xffffff80002da800\n" "R12: 0x00000000000007b0, R13: 0xffffff8011e56340, R14: 0xffffff8011d8c800, R15: 0x0000000000000006\n" "RFL: 0x0000000000000046, RIP: 0xffffff7f81c4d436, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-1699.26.8/osfmk/i386/trap_native.c:2 78
Backtrace (CPU 1), Frame : Return Address
0xffffff80e86e0ec0 : 0xffffff8000220792
0xffffff80e86e0f40 : 0xffffff80002c4d65
0xffffff80e86e10a0 : 0xffffff80002daa9f
0xffffff80efe63880 : 0xffffff7f81c3c2a5
0xffffff80efe63950 : 0xffffff7f81c3dd9c
0xffffff80efe63a00 : 0xffffff80002c63b2
0xffffff80efe63a20 : 0xffffff800022d375
0xffffff80efe63a60 : 0xffffff800022e060
0xffffff80efe63ac0 : 0xffffff800022f413
0xffffff80efe63b20 : 0xffffff800021e612
0xffffff80efe63b40 : 0xffffff800032af02
0xffffff80efe63ba0 : 0xffffff80005a9a27
0xffffff80efe63c30 : 0xffffff8000265695
0xffffff80efe63c80 : 0xffffff8000265213
0xffffff80efe63cc0 : 0xffffff800026a64f
0xffffff80efe63dc0 : 0xffffff800026cdd4
0xffffff80efe63f40 : 0xffffff80002c3fbb
0xffffff80efe63fb0 : 0xffffff80002d9ff1
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelCPUPowerManagement(193. 0)[654D2ABC-8783-3A8C-ADAC-5B56A63ECDF4]@0xffffff7f81c3a000->0xffffff7f81c61fff
BSD process name corresponding to current thread: mdworker
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 85128423582
last loaded kext at 61311213464: com.apple.driver.AppleBluetoothHIDKeyboard 160.7 (addr 0xffffff7f81c80000, size 20480)
loaded kexts:
com.apple.filesystems.msdosfs 1.7.1
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleBluetoothMultitouch 70.12
com.apple.filesyst
Tue Sep 11 16:56:07 2012
Machine-check capabilities (cpu 2) 0x0000000000000c09:
family: 6 model: 42 stepping: 7 microcode: 26
Intel(R) Core(TM) i5-2400S CPU @ 2.50GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC6_ADDR(0x41a): 0x00000000749b3100
IA32_MC6_MISC(0x41b): 0x000004536e028086
IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
Package 0 logged:
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
panic(cpu 0 caller 0xffffff80002c4d65): "Machine Check at 0xffffff7f81c4d436, registersn" "CR0: 0x0000000080010033, CR2: 0x000000000742b000, CR3: 0x0000000017b2f056, CR4: 0x00000000000606e0\n" "RAX: 0x0000000000000001, RBX: 0x0000000000000000, RCX: 0x0000000000000001, RDX: 0x0000000000000000\n" "RSP: 0xffffff810d9ebbc0, RBP: 0xffffff810d9ebbf0, RSI: 0x0000000000000006, RDI: 0xffffff801213d400\n" "R8: 0xffffff8011d8b800, R9: 0xffffff801435c9c0, R10: 0xffffff810d9ebed8, R11: 0x0000000000000001\n" "R12: 0x0000000000000148, R13: 0xffffff8011e552c0, R14: 0xffffff8011d8b800, R15: 0x0000000000000001\n" "RFL: 0x0000000000000046, RIP: 0xffffff7f81c4d436, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-1699.26.8/osfmk/i386/trap_native.c:2 78
Backtrace (CPU 0), Frame : Return Address
0xffffff800081bd20 : 0xffffff8000220792
0xffffff800081bda0 : 0xffffff80002c4d65
0xffffff800081bf00 : 0xffffff80002daa9f
0xffffff810d9ebbf0 : 0xffffff7f81c3c2a5
0xffffff810d9ebcc0 : 0xffffff7f81c3dd9c
0xffffff810d9ebd70 : 0xffffff80002c63b2
0xffffff810d9ebd90 : 0xffffff800022d375
0xffffff810d9ebdd0 : 0xffffff800022e060
0xffffff810d9ebe30 : 0xffffff800022f413
0xffffff810d9ebe90 : 0xffffff800021587f
0xffffff810d9ebeb0 : 0xffffff800021bcda
0xffffff810d9ebf10 : 0xffffff80002af150
0xffffff810d9ebfb0 : 0xffffff80002da6ce
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelCPUPowerManagement(193. 0)[654D2ABC-8783-3A8C-ADAC-5B56A63ECDF4]@0xffffff7f81c3a000->0xffffff7f81c61fff
BSD process name corresponding to current thread: Google Chrome He
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 244553624109
last loaded kext at 22408368125: com.apple.driver.AppleBluetoothHIDKeyboard 160.7 (addr 0xffffff7f81c80000, size 20480)
last unloaded kext at 144820124811: com.apple.driver.AppleUSBUHCI 4.4.5 (addr 0xffffff7f80a45000, size 65536)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleBluetoothMultitouch 70.12
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleHDA 2.2.0f3
com.apple.driver.AppleMikeyDriver 2.2.0f3
com.apple.driver.AGPM 100.12.42
com.apple.kext.ATIFramebuffer 7.1.8
com.apple.driver.AppleSMCPDRC 5.0.0d0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.iokit.IOBluetoothSerialManager 4.0.5f11
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d0
com.apple.driver.AppleLPC 1.5.8
com.apple.driver.AppleBacklight 170.1.9
com.apple.ATIRadeonX3000 7.1.8
com.apple.driver.AppleIntelHD3000Graphics 7.1.8
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.5f11
com.apple.driver.AppleIRController 312
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.SCSITaskUserClient 3.2.0
com.apple.driver.AppleUSBCardReader 3.0.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.0.3
com.apple.AppleFSCompression.AppleFSCompressionTyp eDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTyp eZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AirPort.Atheros40 504.64.2
com.apple.iokit.AppleBCM5701Ethernet 3.1.2b2
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.8
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClien t 193.0.0
com.apple.driver.AppleAPIC 1.5
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.driver.AppleIntelCPUPowerManagement 193.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 160.7
com.apple.driver.AppleHIDKeyboard 160.7
com.apple.kext.triggers 1.0
com.apple.driver.AppleMultitouchDriver 231.4
com.apple.driver.IOBluetoothHIDDriver 4.0.5f11
com.apple.driver.DspFuncLib 2.2.0f3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.AppleHDAController 2.2.0f3
com.apple.iokit.IOHDAFamily 2.2.0f3
com.apple.iokit.IOAudioFamily 1.8.6fc17
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleSMC 3.1.3d8
com.apple.driver.IOPlatformPluginLegacy 5.0.0d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.IOPlatformPluginFamily 5.1.0d17
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.kext.ATI6000Controller 7.1.8
com.apple.kext.ATISupport 7.1.8
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.driver.AppleIntelSNBGraphicsFB 7.1.8
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleUSBBluetoothHCIController 4.0.5f11
com.apple.iokit.IOBluetoothFamily 4.0.5f11
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.2
com.apple.driver.AppleThunderboltDPInAdapter 1.8.2
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.2
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.4
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.0
com.apple.iokit.IOUSBMassStorageClass 3.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.0
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.driver.AppleThunderboltNHI 1.5.5
com.apple.iokit.IOThunderboltFamily 2.0.0
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.6
com.apple.iokit.IOStorageFamily 1.7.1
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
Process: WindowServer [106]
Path: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/WindowServer
Identifier: WindowServer
Version: ??? (???)
Code Type: X86-64 (Native)
Parent Process: launchd [1]
Date/Time: 2012-09-11 17:16:00.174 -0700
OS Version: Mac OS X 10.7.4 (11E53)
Report Version: 9
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00007fff5508a621
VM Regions Near 0x7fff5508a621:
MALLOC_SMALL 00007f86cc800000-00007f86cd000000 [ 8192K] rw-/rwx SM=PRV
-->
STACK GUARD 00007fff61bd4000-00007fff653d4000 [ 56.0M] ---/rwx SM=NUL stack guard for thread 0
Application Specific Information:
objc[106]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 com.apple.CoreGraphics 0x00007fff8b4671d8 _CGXRedrawWindow + 14075
1 com.apple.CoreGraphics 0x00007fff8b43377b CGXUpdateDisplay + 6311
2 com.apple.CoreGraphics 0x00007fff8b42aeed _CGXRunTimerPass + 439
3 com.apple.CoreGraphics 0x00007fff8b43d8e9 CGXRunOneServicesPass + 161
4 com.apple.CoreGraphics 0x00007fff8b44727f CGXServerLoop + 165
5 com.apple.CoreGraphics 0x00007fff8b993142 CGXServer + 1069
6 WindowServer 0x0000000105fd4f31 main + 9
7 WindowServer 0x0000000105fd4f20 start + 52
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x00007fff945367e6 kevent + 10
1 libdispatch.dylib 0x00007fff8e54278a _dispatch_mgr_invoke + 923
2 libdispatch.dylib 0x00007fff8e54131a _dispatch_mgr_thread + 54
Thread 2:
0 libsystem_kernel.dylib 0x00007fff9453467a mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff94533d71 mach_msg + 73
2 com.apple.CoreFoundation 0x00007fff92f8950c __CFRunLoopServiceMachPort + 188
3 com.apple.CoreFoundation 0x00007fff92f91c74 __CFRunLoopRun + 1204
4 com.apple.CoreFoundation 0x00007fff92f91486 CFRunLoopRunSpecific + 230
5 com.apple.CoreFoundation 0x00007fff92fa119f CFRunLoopRun + 95
6 com.apple.CoreGraphics 0x00007fff8b42722d eventThread + 410
7 libsystem_c.dylib 0x00007fff8a4328bf _pthread_start + 335
8 libsystem_c.dylib 0x00007fff8a435b75 thread_start + 13
Thread 3:: CoreAnimation render server
0 libsystem_kernel.dylib 0x00007fff9453467a mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff94533d71 mach_msg + 73
2 com.apple.QuartzCore 0x00007fff88caa2d9 CA::Render::ServYour first two kernel panic reports look very similar to Mac Pro kernel panics cause by uncorrected Memory errors.
The problem with that idea is that iMac processors do not support Error-Correcting Code (ECC) memory, and do not have the Error-correcting Hardware in the processor to generate this fault -- IF operating correctly.
I fear you have a very obscure fault in the processor chip, and that is causing an error that should never occur.
I hope you bought Applecare after your first memory replacement. In my opinion, you may need a new mainboard.
NB: I do not speak for Apple Computer, Inc. -
Please help with this registration code issue!
Hi,
I just purchased Quicktime Pro, and am trying to use it. For some reason when I am working with a video, my registration code is always showing in the window under the video.
Why is this, and how can I remove it so that it doesn't constantly show?
Thanks!If you do post a pic, blur out or hide your registration number.
Never heard of your type of issue either. -
Please help with the Universal Dock issue!!!
Hi,
I recently purchased a universal dock for my iphone 3g. It works great. I just had one question. When my iphone is sitting on it for lets say 20 - 30 minutes. Then if i press the buttons on the remote. nothing happens! If I then press the home button while it is on the cradle then, the remote, it plays music. There after lets say if I stop stop the music through the remote and again press the remote button after a few minutes it starts playing. So what happens after a long time. Why do i have to press the home button on the iphone for the remote to work. Is that how it is supposed to work???
Thanks,
SunilHello! Am i the only one facing this issue?????
-
Multi Camera Editing with Matrox CODEC ( VS4 ) Card
Hello All.
Setup
I am recording 4 inputs from the Matrox VS4 via Wirecast 4.2 and also tried 5.0
- 1080i @ 100Mbps
- All the video footage play perfectly with no problems what so ever
- I Have installed the Matrox VFW Software Codecs of a system which DOES NOT have the VS4 card
- I can edit 1 video with NO PROBLEM.
Problem
- Using Adobe Premiere 7.1 CC with multi camera editing, the footage is jittery after a few seconds.
- Using Adobe Premiere CS 6.0 with multi camera editing, the footage is jittery after a few seconds.
- I have tried with 2 cameras up to 4 cameras and I get the same problem.#
Other Test
- I have tried 12 x videos which are MP4 in multi camera editing with NO PROBLEMS!!!
- I am using 4 x 128GB SSD in RAID 0 ( 1450 MB/s) - Through put is not an issue.
- I have also reduced the MB/s on the ISO capture of 50MB/s
This is the CODEC you need to have installed on your computer in order to edit the view/edit the videos recorded by the Matrox VS4:
http://www.matrox.com/video/en/support/windows/vfw_software_codecs/downloads/softwares/ver sion1.0/
The Matrox Video for Windows (VFW) software codecs let you render and play back Matrox .avi files in your VFW programs without having Matrox video hardware installed. This version provides codecs that were previously available only on systems that have particular Matrox video hardware, such as Matrox Axio. This includes the Matrox DVCPRO HD codec, and "+ Alpha" versions of the Matrox uncompressed and MPEG-2 I-frame codecs. As well, the Matrox VFW MPEG-2 I-frame HD codec now lets you render and play back Matrox MPEG-2 I-frame .avi files in all HD formats (720p, 1440x1080i/p, and full-size 1080i/p).
The following VFW software codecs are provided for use on 32-bit and 64-bit Windows operating systems:
Matrox DV/DVCAM
Matrox DVCPRO
Matrox DVCPRO50
Matrox DVCPRO HD
Matrox MPEG-2 I-frame in SD and HD resolutions, with or without alpha
Matrox Uncompressed in SD and HD resolutions, with or without alpha
Matrox Offline HD
Matrox M-JPEG and HDV (playback only)
Is this an issue that is present the Premier 7.1 CC or the CODEC or even both?
Thank you all.Hello,
Please send me an email at;
[email protected]
I'll work with you to address your multicam performance issue with your VS4
Regards
W@ -
Need help with HD Multi-cam editing...
So it is my understanding that you can't view a multi-cam sequence unless the footage you are viewing is unrendered/unlimited...
So my question is... how do I take rendered footage and de-render it so its unlimited... I tried adding an effect but even color corrector just makes the footage go from rendered to "needs render" which is no good.
For those who understand multi-cam editing better... could you provide some pointers. Thanks!nvm i figured it out.
-
my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist, my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist ,please help me
uninstall all iTunes,5 programes,this worked for me after reinstall them
-
hi, when i am listening music and the screen goes to sleep my music stop playing.Please help with settings
No problem. And no worries, several people have made this same mistake!
Either way enjoy the iPod!
Brock
Maybe you are looking for
-
Problem in cacellation of credit memo via MR8M
Dear team, i have did an GR and posted one invoice with 40000 CHF. later the ggods were fiund defective. then i returend the goods using 122 movemnt type. then i posted credit memo for 30000 CHF. in the credait memo, i have given unplanned delivery c
-
How to merge data in BW from R3 and a legacy source
Hi I would like to combine data from R3 and from a legacy system in BW as follows: I have two similar info objects: One info object contains the stuff from R3 (which contains some history but basically the data is just really well maintained starting
-
When I try to combine two pdf's, it asks for a permission password and says the documents are protected; however, I didn't put any protection/security in the documents. I assume it is a default security under the enhanced security settings of the Ac
-
Can anyone please help me with the logic for this..
hi all, os has the value Windows 2000 IF os CP 'WINDOWS' OR os CP 'SUN'. OS1 = 'X'. ENDIF. (if i test this, os1 doesnot have any value, (should be x)). This doesnot work for me. Any suggestions. Regards, Sukumar.
-
Hello SDN, I am trying to create an authentication Web Dynpro DC. It would work as follows: Using an start plug in the main window it should receive two navigation parameters: login, and password. If authentication is ok, it should redirect to anothe