Please Help With My Headache

Hey there! Here's my problem:
We have an old mac pc, it's a G3 Blueberry that is running OS 8.6. The processor speed is 333mhz. Our objective is to insert a new memory module into the open slot for it, this is in order for us to be able to upgrade the computer to a more recent OS (10.2 Jaguar)as well as create enough availible memory to run comcast high speed access on it.
Upon the first trip to Microcenter we were sent home with a module that--despite being the correct type (128 DIMM PC-100)--was about twice as long as the module we needed to fit in the space provided. As you might assume, I'm a novice of sorts--okay, I don't no much of anything (especially macs).
Come to find out the next day that the module needed is--I was told--for a laptop model, hence half the size I suppose. The teenager at Microcenter told me to come back in a week and a half and they might have it then...a subsequent trip to CompUSA was even less helpful.
We know from the directions on the help menu for adding more memory that the module must be 128mb, no more no less. Seems like all we need is to slip this module right in and move on with our lives--does anybody know of a good merchant online that would be able to supply me with the correct module--though it's old, I know that it's out there. Obvioulsly, along with that, I'd like to be certain that what I get is the correct module for what I'm doing.
Sorry for the long post--if anyone know of an online merchant or has any helpful advice, it would be very humbly appreciated--thanks
L.C.

The iMac 333 uses 144-pin SO-DIMMs and has (2) memory slots, one of which is situated on the underside of the processor card. In order to access that slot, the processor card must be removed. Your iMac can accommodate a pair of 256 MB SO-DIMMs, for a total of 512 MBs of installed memory. Because one of the memory cards must be "low-profile" (referring to height), you're better off just getting the shorter height card, which can be used in either slot. The term "low-profile" has nothing to do with the SO-DIMM's overall length. If you need directions with photos of the memory upgrade, check out this Macworld how-to article. This memory dealer's iMac 333 memory can be found here. They are usually recommended for their quality of service and products.
Incidentally, you should post future questions about your iMac in its designated Expansion Forum, where you'll benefit from the collective expertise of other iMac users.

Similar Messages

  • HT5824 I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. Please help with turning my iMessage completely off..

    I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.

    If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it.  Also, try changing the password associated with the Apple ID that you were using for iMessage.

  • How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore. Please help with proper steps, if any.

    How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
    On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
    Please help with proper steps, if any.

    Also see... these 2 Links...
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141

  • Please help with "You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported." I have seen other responses on this but am not a techie and would not know how to start with that solution.

    Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
    I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
    Please help with what I need to type, how, where, etc.
    Many thanks
    AppleSueIn HunterCreek

    I am afraid there is no solution.
    PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
    You could contact the developers to see if they have an updated version in the pipeline.

  • Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be ab

    Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.

    Adobe - Lightroom : For Macintosh
    Hal

  • [ETL]Could you please help with a problem accessing UML stereotype attributes ?

    Hi all,
    Could you please help with a problem accessing UML stereotype attributes and their values ?
    Here is the description :
    -I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
    -Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
    -Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
    s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
    -However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
    Please help
    Thank you

    Hi Dimitris,
    Thank you , a minimal example is provided now.
    Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
    Instructions for reproducing the problem :
    1-Run the uml2etl.etl transformation with the supplied launch configuration.
    2-Open lqn.model.
    There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
    The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
    Thank you
    Mana

  • Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs

    Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs

    Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
    Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
    Thanks,
    Hussein

  • Welcome. At the outset, I'm sorry for my English :) Please help with configuration Photoshop CS6 appearance. How to disable the background of the program so you can see the desktop. (same menus and tools) Chiałbym to be the same effect as CS5.

    Welcome.
    At the outset, I'm sorry for my English
    Please help with configuration Photoshop CS6 appearance.
    How to disable the background of the program so you can see the desktop. (same menus and tools)
    i wantto be the same effect as CS5.

    Please try turning off
    Window > Application Frame

  • HT201210 cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

    cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

    If you mean updae server
    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem
    Otherwise what server are you talking about

  • HT3209 Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

    Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

    You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
    Regards.

  • Please help with slideshow problems!

    Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing.  Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened".  How can I save a
    slideshow inprogress and be able to reopen and continue to edit and make slideshow?  I want to thank anyone who can help me with this in advance as I
    have gotten so frustrated that I want to just scream.
    Thanks

    Thanks for the help, thought I had done so but maybe not.  Anyway will have another go at it, now may I ask another
    question?  I am trying to add audio to slideshow.  I have some music I purchased thru amazon as mp3 files but I get
    message no codec and when I try to add wmv I get same message.  What type of file do I need and how can I add
    multiple songs to one slideshow.   I have one little wmv file that will go in, but it just replicates itself multiple times until
    it fills slide show. 
    Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
    Date: Sun, 26 Dec 2010 20:34:32 -0700
    From: [email protected]
    To: [email protected]
    Subject: Please help with slideshow problems!
    You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
    Now you are most probably using only the Output command: that is what makes the wmv file.
    You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
    If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
    -- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
    -- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
    -- The 1st entry on that Shortcuts bar is "Save Project"
    It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing.  Save each Project with a unique name.
    After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
    Note:  you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
    >

  • Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.

    Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.

    Hello Priyanks,
    I found an article with steps you can take to troubleshoot issues with an iPhone not connecting to your car stereo:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

    My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

    Following the fix here worked for me:
    https://discussions.apple.com/message/15680566#15680566
    except my plist file was in ~/Library instead of /Library.
    -Scott

  • Ipod Nano 6th generation setting issue - hi, when i am listening music and the screen goes to sleep my music stop playing.Please help with settings

    hi, when i am listening music and the screen goes to sleep my music stop playing.Please help with settings

    No problem.   And no worries, several people have made this same mistake!
    Either way enjoy the iPod!
    Brock

  • Please help with Macbook Pro

    Please read my story because I really need some help...
    I've had my Macbook Pro for only a little over a year now but it has already given me tons of problems and headaches. I was very happy when I first got it but over the next few months I noticed strange things with it. For instance, the lid is slightly bent but not so much that it still looks ordinary when closed. I was annoyed with it but I tolerated it since it is not that disruptive. Then dust appeared underneath a small part of the screen, forming a rather conspiscuous, slightly discolored spot. Again I was annoyed but I just went with it. And then after only 5 months after purchase, something related to the hard drive broke. I think the ribbon cable that was connecting it to the motherboard died or something. It was still under warranty so it was easily fixed. A few months passed without incidents. Then a month after its warranty expired, it started to have kernel panics every single day. Most of the time the screen would just become a mass of messed up colors and nothing would respond. Sometimes the screen just went black and then the computer shuts itself down. Other times the computer just freezes with nothing responding and I have to force shut it down. I sent it to an Apple service center and had it diagnosed. The genius said that the hard drive is damaged and needs replacing but other components are still fine. So I bought a new hard drive and had it replaced. For a few weeks, the problem seem to have gone but soon, the kernel panics started again and occurred more frequently. After days of research I finally found out the problem is RAM related. I tested each stick and each slot and concluded that the bottom ram slot was busted. The Apple Service Center offered no help but to replace the motherboard (or logic board). I cannot go with this because I already spent a ton of money in purchasing the computer. I also could not get Apple Care because it is very expensive and I had no ability to spend more. So I resorted to just buying a single 4gb ram stick and tried to live with only one ram slot. I thought that I could finally relax and try to enjoy the computer even with all of its annoyances. But only a few days ago the Wifi just turned itself off and won't turn on. Only after a restart will it start working again. I tried to tolerate it but it keeps turning itself off just minutes after I turn the computer on. I suspect that it might be a hardware problem (again) because the same thing is also happening with my Bootcamp partition; wifi disconnects and will not reconnect. Bluetooth also is not working anymore. I know that this is a vague question but I'm desperate. Is there anything at all that I can do in order to fix all of the problems and prevent all sorts of headaches? I feel that I have tolrated enough and I just can't take it anymore. I want to have it replaced but I do not know how I am going to do that without Applecare (which again is very expensive for someone like me). Please help me. I do not want to go back to normal, less expensive PC's. If this keeps up then I will be forced to do so because it is very expensive to buy another macbook.

    Sorry to hear about your unfortunate experience but I do not think you can get AppleCare at this point in time.
    Can I purchase the AppleCare Protection Plan anytime?
    You can purchase the AppleCare Protection Plan anytime within the one-year limited warranty period. Your eligibility for coverage under the AppleCare Protection Plan starts from your hardware purchase date. Apple strongly recommends that you purchase the AppleCare Protection Plan when you purchase your Apple product to maximize the additional benefits provided under the plan.
    You will most likely need to try to sell the mac for a parts machine and consider a PC. You may wish to explore Apple refurbished Macs that have a warranty of a1 year.
    There are also many sellers of used Macs but since there aren't any extended warranties it is some what risky.

Maybe you are looking for

  • Align Columns?  using Acrobat Pro 9 to create pdf from text file(s)

    Hello, Every time that I have tried to create a PDF from a text file, the columns dont align.  The default Notepad setting I use to view a text file is Courier New which shows the columns aligned.  How can I set defaults in Acrobat Pro 9 to have colu

  • How to write list values to a text file?

    Hi. Does anyone know how to write values stored in a List to a text file? I have a program that asks the user to enter a name and stores it in a list. The number of names in the list depends on how many times the user wants to enter a name. The probl

  • BA00 - Sales Order Confirmation Printout

    Can anyone advise if it's possible to printout output tax condition MWST at both header and line level at the same time in the order confirmation form? Thanks Peter

  • SAP IdM / GRC 10 GRAC_REQUEST_STATUS_WS Table

    We are trying to find what tables in GRC provide the web services, like GRAC_REQUEST_STATUS_WS, their information.  We are seeing a situation where a GRC Access Request appears approved in GRC10 , but the status that gets read back into IDM (via the

  • Midi messages lost

    I'm developing an application which relies on sending and receiving sysex messages with another machine. Sometimes could happen that the other machine send a lot of messages in a very short time. In these cases I noticed that the midi device often do