Please help with new iphone

I have none contacts on my older mbp, though on my new iphone.
what happens really on syncing? will my contacts on my iphone been lost?

wjosten wrote:
From your initial post:
I have none contacts on my older mbp
From your second post:
there are three entries in my address book, we are speaking about address book on mbp
Which is it? Do you have entries in Address Book on your Mac or not? If you already have entries, when you do sync you will get a merge or replace prompt. Select Merge.
Which is it?
I have not used address book really, therefore; so the latter info -from today- is right.
I will try iSync, or would you check another application in this „special case“ of unexperienced users?
I have no idea what you are talking about here. Contact syncing is selected in iTunes.
› Before syncing with a supported contact application on your computer, …
My failure again, I thaught, for this special case to use another app;
now you and everyone know that I have my first iphone since hours.
Have a nice day,
Karl

Similar Messages

  • HT3209 Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

    Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

    You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
    Regards.

  • Please help with updated iphone

    I updated my iphone 4 to the IOS 5 on Saturday, and now I can't receive any texts but can send them. Also under my messages it says that it can only be received to my email and my phone number is still verifying. Can someone please help me?

    Settings>General>International.
    Set the calendar to "Gregorian". You have it set to Buddhist.

  • Help with New iPhones

    We've recently gotten iPhones for the first time and need help!  Which forums would be the best place to ask questions.  The problem is, when i received our two phones, I set them up but there was no way to see which phone was for my phone number or the one for my husband's so both phones got set up with my information (but separate phone humbers). 
    What we are struggling to do is figure out how he can access whatever location he needs to access to change the information so that it reflect him, not me...so that he can, if he wants to, change the password for his access to the App  Store, and to be able to log into his Facebook page.
    Well, there, I've asked it here, and don't even know if this is the right place! ;-)  HELP!!

    These forums are dedicated to Residential products and services offered by Verizon.
    For help on Verizon Wireless issues, please post your topic on the Verizon Wireless community.
    Thank you
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

  • Please help with my iphone 4 ipod app?

    Hi everyone, I am having problems with playing podcasts and music on my iphone 4 (IOS 4.3.5 8L1). The symptom is that the podcast skips or doesn't play at all. Music is similar.
    I have had the phone replaced by Apple once, and have been to the genius bar 3 times and spent hours on the phone to Apple support.
    I have done DFU restores on the phone and downloaded the entire IOS update several times, the firewall, AV and ad aware all disabled on the computer (windows 7 BTW) during the download of both the IOS and subsequent podcasts.
    Directly after a DFU and with no apps installed, sample podcasts (that had experienced problems) seem to be OK. I then installed the apps one at a time and tested the podcasts in between, I installed the 6 apps I find most useful. I then downloaded more podcasts and the problem returned after the ipod app on the phone "lost" some podcasts that were shown as being on the phone in iTunes. Resyncing meant that the podcasts were shown but the problem of skipping etc. had returned.
    Today I went through the same process and got the same result, but with different podcasts. Similarly, the ipod app "lost" some podcasts before resyncing corrected that part but started the "skipping" fault.
    Other things I have done:
    The podcasts all play correctly on iTunes, and also on my iPod.
    I have downloaded the entire podcast library several times to eliminate the remotest possibility that they are corrupt (this would manifest by them not playing correctly in iTunes/iPod I would imagine as well).
    I have had a iPhone 3GS for a while and also an iPod, so I am familiar with the products, and never had a problem.
    I have logged a case with Apple and am now at my wits end, because it seems that getting any sort of ownership is a real problem.
    Any suggestions on what else I can do?
    Many Thanks,
    Neil
    BTW: iTunes 10.4.1.10

    Hi there MeMeGuidry,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Display image issues
    This can include bright or dark pixels, lines in video, or sections of video missing.
    Try turning iPhone off and then on again.
    Verify the issue is not content related, by viewing different content.
    If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaper and slide the slider.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    -Griff W. 

  • Urgent, Please help with new MIDI pedal

    I just got an old awesome MIDI pedal the X-15 Ultrafoot. The pedal has two expression pedals and 10 pushbuttons/pushpads (as well as two buttons to scroll through banks, and a "mode" and "bypass" button).
    What I want to is assign each pushbutton to a different parameter. I then want the expression pedal to be activated to whatever parameter I have selected. The problem is I do not know how to make the expression pedal exclusively control only the last parameter that was selected.
    If somebody could help me with this I will be eternally grateful

    Hi Harm,
    I tried moving the BCLK slider up to 140 in the following application provided by asus (its easier than in the BIOS) and the CPU went up from about 3450mhz to 3780mhz. The DRAM only went up to 562.  I dont think im understanding what you mean by 2:10 mermory timings and getting the memory up to 1800, becuase it seems that i would need to increase BCLK to much higher than it is in order to get the DRAM from 562 to 1800? Shall I try push the BCLK up higher to 150 (is it safe?)
    Below is the result of moving the BCLK slider from 130 to 140. It only moved to 562 Mhz ? Please can you explain how one gets this figure to be in the range of 1800mhz to 2000mhz

  • Hello, please help with my iphone 4s.

    Hello, my iphone4s 's 7 months old, 2 days ago when the battery came to notify me at 10% i stopped using it and later it was turned off by itself. When i got home and plugged it in the charger it couldn't start up at all.I tried to press "HOME" and the "POWER" buttons for 10-20s but it couldn't start up or show anything. I bought my phone to apple store, the technician just checked( i don't know how he did but in just 30s) and he told me that there was proof that there was water in my phone and asked me if i wanted to change the phone then i had to pay 199 euro. I didn't accept that because the phone's never ever been in water intentionally or accidentally. He tried to hold the "HOME" and "POWER" buttons pressed but the screen was still blank later on the way home i found that the screen came with notification of low battery and symbol of charger but when i plugged in the charger the phone couldn't charge.
    The day after i came to apple store again the technician checked again for 20s and he said something in my phone was red and he said there must have been water in the phone. I explained to him that the phone's never been in water and i told him that i still used the phone until its battery went flat and couldn't start up or charge.
    I have a doubt about the battery and hereafter are symtoms of my phone before it became a brick.
    Symtoms : 1. i had to charge it 2, sometimes 3 times a day.
                     2. The night before it couldn't start up, it was fully charged and in the morning it was 67% with wifi on in sleep mode.
    I'm wondering if it's my fault or the product's itself and as the phone's just 7 months old do i have to pay 199 euro for the new one or it's apple's responsibility to change a new one for me without paying?
    Thank you for reading, hope you could help me with this.
    Have a nice day!

    Unfortuantely it sounds like some humidity issue has caused some liquid damage, possibly in your charger port area.  Have you ever had the phone in bathroom with you when having a bath?
    I had poor battery issues with my phone and the first thing they did when I got to Genius bar was check for water damage (luckily that was all fine).  After that, because of the issue with not being able to power off and poor battery they replaced my phone. They wouldn't ask for the money unless there is water damage there.  Water damage doesn't necessarily mean you soaked it in water, just a few droplets from somewhere have entered the port.  Unfortunately, according to warranty terms and conditions if you want it replacing you will probably have to pay them.

  • Please help with new install

    Superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem and not SWAP or UFS or something else, then the superblock is corrupt and you might try running e2sck with and alternate superblock: e2sck -b 8193 <device>
    I get this error after a new install and reboot, any idea what this mean and how to fix it.
    Appreciate all the help.
    This is a AMD 1.8mgz and 1 gig of ram on Asus mb.

    I just downloaded the image archlinux 2009.02 core i686 and was able to install with no issues.  I was able to reboot successfully.  It appears to be an issue with the newest installer specificly.  turtle, try the old installer and see if you can't get things working.  This should work for the OP too. 
    I got it to boot after an install for the first time using this older install image.
    I wasted 8 freaking hours trying to figure out the problem and the answer is as simple as use the older installer.  Shesh.
    I was wrong.  I installed once successfully in one of the computers on an 80 gb hard drive.  When trying to reinstall on two different 120 gig hard drives the error repeated itself.  I'm spent on this.  I'm going to have to try another distro.
    After two more installs I can get it to load but I'm now having a superblock last load time is in the future error.
    Used fsck on all my partitions to fix the problem and now I have a successfully booting arch system.  Guess I won't have to jump ship just yet.
    ------update, maybe this will help somebody----------
    I'm not sure why but the partitions on my first disk are all referred to as sda and not hda even though all my hard drives are IDE (via command 'df', fstab has them listed by UID). 
    Even weirder, when I installed a new hard drive into the machine, I had to format it and mount it by referring to /dev/sdb and not /dev/hdb like I expected.  This is odd as I don't even have any sata connections in my machine.  Could someone tell me why this is happening.  Is it a 'feature' or a 'bug' of arch?
    lldmer,  I wish I had listened to you when I was trying to install over and over the day before yesterday.  Looks like you hit the nail on the head on this one.  I wish I had tried what you suggested.  The weird thing is that when I was originally having problems, the fstab did have the drives listed by UID.  I wonder if changing those UID entries to /dev/sda style entries would have fixed my problems. 
    If I install arch again, I'll have to try that.
    Last edited by bodyhead (2009-10-26 14:55:14)

  • Please help with new Ipad4

    Hi,  I can't get my Ipad4 to do anything.  I set it up on Christmas when I was out of state at my mom's.  Now it won't do anything at home.  I can't even get the home page with the icons.  Thanks for your help! 

    Disabled as in
    http://support.apple.com/kb/HT1212
    No other way disabling is a security feature
    Lesson
    keep kids away from iPads and backup in future
    Oh and you will lose any data not backed up

  • Please help with new update

    cant read text with ios7 even if i move slider up to full i had old style prob 48 or 56 please help

    Make sure router is up to date. Reboot (ATV, router, computer). Check istumbler for interference.

  • Please help with new iMac

    hello,
    I just bought the imac yesterday, the baseline version.   I use flash based adobe applications quite a bit and I now see that the imac doesnt have this.  Is this an option for me to install on my own?  if so, what site should i use to download?  and is it safe to do so?   thank you. 

    Download flash player from adobe
    http://www.adobe.com/products/flashplayer.html
    Perfectly safe to do so.

  • How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore. Please help with proper steps, if any.

    How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
    On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
    Please help with proper steps, if any.

    Also see... these 2 Links...
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141

  • HT5824 I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. Please help with turning my iMessage completely off..

    I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.

    If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it.  Also, try changing the password associated with the Apple ID that you were using for iMessage.

  • Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

    Subject:
    Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

    Settings>General>International.
    Set the calendar to "Gregorian". You have it set to Buddhist.

  • HT4061 need help with my iphone 4 i try to update last five  days but after updating to 6.1.2  it says that    We're sorry, we are unable to continue with your activation at this time. Please try again later, or c

    need help with my iphone 4 i try to update last five  days but after updating to 6.1.2  it says that
    We're sorry, we are unable to continue with your activation at this time. Please try again later, or c

    If the iPhone was hacked and unlocked via unofficial means, it has become locked again. Insert original SIM in the phone to activate with iTunes.

Maybe you are looking for

  • How can i get the music ive copied from cd onto my new computer

       how can i get the music that i have copied from cd's on to my new computer.(the computer my phone was sync to blew up)  if i sync to the newit i will all the music  thats on my phone, 

  • Route Pattern issue

    I am running Cisco Unified Communications Manager Version 8.6 and I am trying to add a route pattern that I can not get to work. I am copying an existing route pattern that works and only changing the prefix. i.e. 9.331XXXX copied and changed to 9.55

  • CSS not rendering in preview

    I am creating a website that uses a stylesheet for viewing on the web and one for print. For web viewing the link tag is link rel=stylesheet href=styleweb.css media=screen. For print the link tag is link rel=stylesheet href=styleweb.css media=screen.

  • Low FPS when accesing iPhone video output image buffer

    2 down vote favorite Hi, I'm trying to do some image processing on iPhone. I'm using http://developer.apple.com/library/ios/#qa/qa2010/qa1702.html to capture the camera frames. My problem is that when I'm trying to access the captured buffer, the cam

  • Labview absolute time waveform chart to excel

    Hi everyone, I have a bit confusing on absolute time waveform chart. My problem is when I want to export to excel, the data duplicate nearly 30 times for each second. My project is about collect temperature from serial port and plot it in waveform ch