Please help with Printer problem on MBP

I am running 10.5.1 and am trying to install the software to enable me to scan. I have tried from the original CD, but it doesn't work (i assume this is because it was meant for 10.4). I have also tried downloading from the website but the download always says something like "19mb out of ?" and then eventually the downloads errors out.
Is there any way i can get the scanner to work? can anyone upload this software to me? I know its a lot to ask but im not sure what to do.

Don't know what to tell you, but I downloaded the file without any problem. Do you have enough space on your drive for the file? You may have a problem on your drive so you might consider doing the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger and Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Similar Messages

[ETL]Could you please help with a problem accessing UML stereotype attributes ?

Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank you

Hi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana

Please help with slideshow problems!

Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing. Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened". How can I save a
slideshow inprogress and be able to reopen and continue to edit and make slideshow? I want to thank anyone who can help me with this in advance as I
have gotten so frustrated that I want to just scream.
Thanks

Thanks for the help, thought I had done so but maybe not. Anyway will have another go at it, now may I ask another
question? I am trying to add audio to slideshow. I have some music I purchased thru amazon as mp3 files but I get
message no codec and when I try to add wmv I get same message. What type of file do I need and how can I add
multiple songs to one slideshow. I have one little wmv file that will go in, but it just replicates itself multiple times until
it fills slide show.
Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
Date: Sun, 26 Dec 2010 20:34:32 -0700
From: [email protected]
To: [email protected]
Subject: Please help with slideshow problems!
You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
Now you are most probably using only the Output command: that is what makes the wmv file.
You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
-- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
-- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
-- The 1st entry on that Shortcuts bar is "Save Project"
It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing. Save each Project with a unique name.
After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
Note: you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
>

I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect to my MacBook it erases everything on had on there. Can someone please help with this problem?

I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.

dwgar1322 wrote:
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
Yes, you have WD software installed REMOVE IT !!
WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
(also dont use WD drives anymore)
Read all about it here:
https://discussions.apple.com/thread/5475136?start=255&tstart=0
See their website on removing the destructive WD software here:
http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/

Please help, color printing problems.

I have snow leopard and just bought a new HP officejet 7500 wide format wireless all-in-one. The problem is when I Print from my boyfriend's PC, the pictures are fine but when I print from my imac, the image I see on the monitor isn't what is printed. The colors are off and the picture is way too dark. I've looked on the internet to try to find a solution but haven't really found one. Please help.

Hello
Driver from HP web site
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-86352-1 &cc=us&dlc=en&lc=en&os=219&product=4083652&sw_lang=
instruction for configurationn and use
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&tmp_task=setupCate gory&cc=us&dlc=en&lc=en&os=219&product=4083652&softwareitem=mp-86352-1&sw_lang=# N28
HP printer listing for os 10.6 support is not that clear but "HP Officejet Pro L7500 series" in on the list so you may not need to download driver from hp but only from apple
HTH
Pierre

Please help with ejecting disk from MBP that won't book

I was in the middle of installing a Leopard update when my MBP froze.
Since I had to tunr it off, it now won't start up.
I tried a friends OSX install disk to get it working and it won't install.
Please help me eject the disk.
No matter what I do I cannot get it out.
IS there a Terminal prompt to eject it.
The install disks won't allow the command under disk utilities because it is starting up with that disk.
PLease help.

hold down the trackpad button while rebooting the computer

Please help with AcroIEHelper problem

Hello,
I had perfectly running laptop. Now, with no reason every time I turn on my laptop I get a messege that Windows Installer is preparing to install something. Then Installer asks me to insert a disc with Adobe Acrobat 7.0 Pro. When I insert the disc installer tells me that it can not access a file. Exactly:
Adobe Acrobat 7.1.0 Professional
Error 1304: Error writing to file C:\Program Files\Adobe\Acrobat 7.0\ActiveX\AcroIEHelper.dll.
Verify that you have access to that directory.
I checked that directory and did not find such file. Sometimes, this messege appears when I try to open C: or folders on my Desktop but not always. Once it showed up when I tryed to start IE. Ater I uninstalled Adobe Acrobat this messege stopped showing up. But when I reinstalled Adobe Acrobat it started again.
I have tryed almost every anti-malware I could find - McAfee, Spybot, Spyware Doctor, Malwarebyte's Anti-Malware, Superantispyware, AVG 8.5, Dr. Web - all these programms I ran in both normal and safe modes. I even went to BIOS Setup and returned to factory settings. Nothing helped. I went to malware forum and people did not find any malware in my logs.
Then, I installed WinPatrol that seems to be able managing startup programs. After I desabled SC-Acrobat.exe and Adobe Gamma Loader I do not have this annoying Windows Installer for Adobe Acrobat warning any more when Windows starts. But it still shows up often, but not always when I open C: or folders on my Desktop. I have Windows Vista Home.
So could you please help me with this problem? Thank you.

MamaDragonBoy wrote:
It's already set to "mixed" wireless b and g... should I try setting it to all g? Both my laptop and my husband's are "g"
setting it to g certainly wont hurt anything.

Please help with printing from Thinkpad

I've spent the last couple of days reviewing similar posts, and tried suggestions within with no success. Here's my problem:
I have an older iMac running 10.3.9 wirelessly connected to the internet with an Airport Extreme I picked up about a year ago. Recently I decided to run my printer through the Airport. My Mac found the printer with no problem, and prints just fine.
I also have an IBM ThinkPad, running Windows XP. I have no trouble, after initial setup headaches, getting the ThinkPad to find the network and get online, but I can't print from the ThinkPad.
I used Bonjour to find the printer, an hp deskjet 940c, and the setup seemed to work. (I used the manufacturer's disk for the driver.) But everytime I try to print I get: "this document failed to print" error message. The ThinkPad is connected to the network and online.
I also wish the ThinkPad could find the iMac. Is this wishful thinking?
Any help would be greatly appreciated.

Dear snaggl2th,
Try this
pageFormat = pf
g = g2
g.translate((int)pageFormat.getImageableX(),(int)pageFormat.getImageableY());
int wPage = (int)pageFormat.getImageableWidth();
int hPage = (int)pageFormat.getImageableHeight();
g.setClip(0,0,wPage,hPage);Hope it helps
Joey

Please help with internet problems

Hi
I have just started having problems with my blackberry curve. When i go to internet and click on my bookmarks it opens up front page fine but when i try to click on pages to connect to from front page it kicks me out straight to bookmarks page. Please help ????????????> this has only started in last few days i.e i go to sky sports which it opens then trying to click on an item to read it kicks me straight to bookmarks page????????

Hi cp70uk
Welcome to BlackBerry Support Forums
Have you try Clearing your device Browser data ,you can try this and see if that helps ,For that Open your Browser > Press the Menu key > Scroll down to Clear Browser Data ( Mark all fiels ) then Clear Now .
Then perform a Battery Pull Restart like this device POWERED ON remove the battery wait for a min. then reinsert it back ,after reboot see if problem resolves.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Please Help with printer issues

I have an iMac intel and with OS 10.8.3. Since the last update about 2 days ago I have not been able to print though the printer is on the same wi-fi as iMac. I have restarted both but to no avail. I deleted all the printers I had to try and add the same printer and the iMac will not list this printer, so I do not have the opportunity to add it. I rely heavilly as this is my liveliihood to be able to scan and print docs. Was this caused by the last update or is there something else going on? Please help!!!

did a copy paste of HP OfficeJet Pro 8500A Plus into google
https://www.google.dk/search?client=opera&q=HP+OfficeJet+Pro+8500A+Plus&sourceid =opera&ie=utf-8&oe=utf-8&channel=suggest
first hit
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=dk&lc=da&dlc=da&tmp_geoLo c=true&product=4116838

PLEASE HELP WITH BATTERY PROBLEM!!

I recently swicthed from the 8830 which was a wonderfull phone. MY curve from sprint, 8330 is dead every day by 5 pm. I already exchanged the phone and had the battery replaced (third battery) I used my 8830 with the same applications and the most it would be by like 50-70 percent. I dont know what to do. The curve is SUPPOSED TO get better battery life! but actually is not. Its become a non realiable phone for me. Its still under my 30 days. Even though i already swaped it once. I do not want to get rid if this phone. I love the blackberry i just need the battery to last me either the same or better than the 8830 as blackberry promised....
I have read forums in closing the applications but even when i do its still the same. I occasionally do get the hour glass problem and it does lag quite a bit. Does any one know of a battery issue?? Has to be???
I let it die last night and recharged it completely - as some of you recommended. I will try it today but my hopes arent to high ....
Please help.
Thank you

Hi,
Excellent Post by JSANDERS
http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/
Thanks
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Please help with start problem of my new X61s

I baught my X61s 2 weeks ago. It was received with vista home installed. I downgraded it to XP myself 1 week ago and it was working very well. Today, when I turned on the machine, nothing appeared on the screen, and I only hear about 7 beeps. I tried to turn off and turn on the machine several times, but no difference. I don't know what happen.
Please help me! Thanks.

Per the magic beep decoder ring that might mean bad DIMM or system board.
I don't work for Lenovo. I'm a crazy volunteer!

Please help with namespace problem

Hello,
I am trying to display a gif image an I have a namespace problem.
Here is my xml document:
<?xml version='1.0'?>
<?xml-stylesheet type="text/xsl" href="authors.xsl"?>
<authors>
<author>
<name>Mike Galos</name>
<nationality>French</nationality>
</author>
<author>
<name>Cynthia Randall</name>
<nationality>Canadian</nationality>
</author>
</authors>
Here is my xsl stylesheet:
<?xml version='1.0'?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:template match="//author">
<image     xmlns:xlink="http://www.w3.org/1999/xlink"
               xlink:type="simple"
               xlink:href="logo.gif"
               xlink:show="embed"/>
</xsl:template>
</xsl:stylesheet>
I want the browser to diplay the gif image but it is only showing the image icon and not the actual gif image.
Can anyone please help??
Thanks in advance,
Balteo.

do you use a special browser?
if not, do you really expect a standard browser to understand this kind of non-HTML image tag?
<image xmlns:xlink="http://www.w3.org/1999/xlink" xlink:show="embed" xlink:href="logo.gif" xlink:type="simple">check HTML 4.0 (http://www.devguru.com/Technologies/html/quickref/html_img.html)
or XHTML(http://www.devguru.com/Technologies/xhtml/quickref/xhtml_img.html)
for the correct tag syntax.

Please help with some problems with my N96

Hi there,
I have spent a fair bit of money on my Nokia N96 and unfortunately it is out of its warranty etc.And I have few issues with it.
So can anyone advise me as to how about I can overcome some issues:
Firstly, in my message inbox only the numbers display instead of the names (e.g.. +447770260.. Instead of Peter), has anyone had this issue or can help with this? I have gone into the message setting and nothing sticks out and says click me for number or name to be displayed.
Secondly, the vibrating device doesn't seem to work at all some days and other days it seems fine? Is this a common fault or is it my phone. Also, is there anywhere on the phone to adjust the vibrating force which maybe getting in the way?
Many thanks for any advise or for merely looking, and grateful for any help.
Adam

/discussions/board/message?board.id=smartphones&message.id=112590&query.id=115949#M112590
read the above thread in regards to the contacts issue. it is a common issue for the s60 phones no fix as yet and it has been few years now.
there is no way you can adjust the vibration force. its either on or off. the vibration should work at all times if you have it set to work. it should not be random. you might want to take it to nokia care for them to have a look at it despite the fact that it is out of warranty.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Can someone help with print problem?

I have problem saving the printer driver settings in CS6, and not shure it is problem with my installation only. Can anyone check for simlar behaviour by selecting some printer driver settings that are not the default ones and see if those are saved when Done button in the Print dialog is pressed. Thank you!

There are only few threads describing the similar problem, I have been checking for meny years for that because it is nothing new to me I remember the same behaviour in CS and CS2, and allways wondered why there was no official fix for it. Actually, the reason to ask for help is not the bug itself, but rather the bizzare lack of user complaints in community forums, that would have eventually rised the program designers attention. Am I the only one out of maybe millions of Illustrator userrs that regularly prints from it?

Please help with Printer problem on MBP

Similar Messages

Maybe you are looking for