Please help with printer setup
I cant seem to get my new canon mp530 printer to work via airport extreme or express. I have downloaded the driver software on both powerbooks, and have been able to print when the usb is plugged in directly.I am replacing a hp1600 that worked over this network. Thank You...the error message i get is"error :300.the printer does not respond.make sure that the printer is powered on and properly connected to your computer.
Message was edited by: lawrence gelman
Were you actually able to print successfully over the wireless connection? My printer responds wirelessly-- the print try opens, the paper feeder turns, but then I get a 306 error.
I spent hours with tech support yesterday-- two different guys-- and both said I am trying to do the impossible. They say the Base Stations are only designed to deal with printers via USB.
But I don't see why the Base Station should care whether the wireless device is a printer or xbox or what have you, if it is wireless enabled.
It's all very frustrating.
Similar Messages
-
Need help with Printer Setup conventions
I can't get my Brother printer to print from one computer--but it prints okay from the other computer on my network. I need to know the conventions for the Printer Setup Utility.
There's a checkbox by every printer on the list. What does it mean when the checkbox is grayed out?
Some printer names appear in bold. What does that mean?
Thanx.Thank you for your reply. I appreciate your help in this and just want to understand what you're saying.
As I say, the printer is displayed in the print dialog box but the checkbox is grayed out. I'm assuming that when you say "...it can't find/see them now," you mean the print dialogue can't see them (the drivers). Your last sentence confuses me. You say, "Do you maybe have Printer Sharing enabled & they aren't actually directly connected? If so you have to reboot after turning it off." A little confusion about your antecedents here. What isn't actually connected? The printer? So I have to reboot after turning it off, "it" I suppose is the printer, is that right? I will try that. So turn printer off, reboot, turn printer on. Right?
I will describe my problem. l thought that if I understood why the checkbox was grayed out I might see what my problem was. If you want me to start another topic I can do that.
Problem: I have a network with 2 computers and the Brother
multifunction fax/printer. I'm using an Apple airport hub. The printer
and one computer (Mac tower) are connected to the airport base via
ethernet. The 2nd computer (Apple laptop) is on the wireless network.
Until recently i could print from both computers. Now I can't print from
the tower. But I can still print from the laptop.
When I try to print from the tower I get an error message that says, "Cannot print from current printer." I have rebooted, reinstalled printer drivers, checked cables, deleted printer from printer list and re-added printer all to no avail. But as I say, I can still print from the laptop which is using Airport. So the printer prints, the hub connects to the printer okay (ethernet) and I know the tower connects to the hub (I can ping the printer okay from the tower.)
I am conversing to Brother support via email and their first suggestions I have already tried. Perhaps there's some problem in the network, but I can't figure it out. Worse yet, now when I go to the Network preferences I get an error message which says, "Your network settings have been changed by another application." THIS ERROR MESSAGE WON'T GO AWAY! I can click 'okay' but it reappears. I have to force quit the System Preferences to get out. If you can help with any of these problems I surely appreciate it. -
Please Help with printer issues
I have an iMac intel and with OS 10.8.3. Since the last update about 2 days ago I have not been able to print though the printer is on the same wi-fi as iMac. I have restarted both but to no avail. I deleted all the printers I had to try and add the same printer and the iMac will not list this printer, so I do not have the opportunity to add it. I rely heavilly as this is my liveliihood to be able to scan and print docs. Was this caused by the last update or is there something else going on? Please help!!!
did a copy paste of HP OfficeJet Pro 8500A Plus into google
https://www.google.dk/search?client=opera&q=HP+OfficeJet+Pro+8500A+Plus&sourceid =opera&ie=utf-8&oe=utf-8&channel=suggest
first hit
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=dk&lc=da&dlc=da&tmp_geoLo c=true&product=4116838 -
Can Someone Please Help with Email Setup!
I know it maybe a sin, but I have a hotmail account, I been trying to on my Iphone. It doesn't seem to be working, can some please help me out
you cant set it up in your mail app on your iphone to my understanding... Microsoft did not make this easy, since it needs a plug in on your computer to work and does not use standard pop3 protocals. Blame Microsoft not Apple on this one
My suggestion
Bookmark and use http://mobile.live.com to check your Hotmail account, it is designed for mobile phones and loads quick -
Please help with printing from Thinkpad
I've spent the last couple of days reviewing similar posts, and tried suggestions within with no success. Here's my problem:
I have an older iMac running 10.3.9 wirelessly connected to the internet with an Airport Extreme I picked up about a year ago. Recently I decided to run my printer through the Airport. My Mac found the printer with no problem, and prints just fine.
I also have an IBM ThinkPad, running Windows XP. I have no trouble, after initial setup headaches, getting the ThinkPad to find the network and get online, but I can't print from the ThinkPad.
I used Bonjour to find the printer, an hp deskjet 940c, and the setup seemed to work. (I used the manufacturer's disk for the driver.) But everytime I try to print I get: "this document failed to print" error message. The ThinkPad is connected to the network and online.
I also wish the ThinkPad could find the iMac. Is this wishful thinking?
Any help would be greatly appreciated.Dear snaggl2th,
Try this
pageFormat = pf
g = g2
g.translate((int)pageFormat.getImageableX(),(int)pageFormat.getImageableY());
int wPage = (int)pageFormat.getImageableWidth();
int hPage = (int)pageFormat.getImageableHeight();
g.setClip(0,0,wPage,hPage);Hope it helps
Joey -
Please help with printing issues...
I used the "Real estate" template for newsletters in Pages '08, and the newsletter looks great, but when I print it out, the top box, the "real estate" box, prints just a blue box...not at all what I am looking at on the screen, everything else is great, and even when I click on preview after print, it looks great, but does not print out the right box...I even printed just the pages template, wondering if I had edited something wrong, but even the pages template does not print the top box as shown...I have also had a difficult time printing out coupons with bar codes on them...I know it is not the printer, as it is shared with a pc, and the coupon and pdf file print fine thru the pc...what am I doing, or is there a setting I have missed?? Thanks so much.
If its a problem printing from program AND Preview, that might imply a system problem, not a program issue. You said it was one of the template files.
Send me an email this weekend (so I can get your email without posting it up here). I will produce a pdf from my machine of the same template and email it back to you. See if that one prints correctly.
If it does, then we eliminated Preview or the printing subsystem as the problem, it is with Pages producing the pdf.
If it still prints bad, then its a system issue.
I see you have printed over and over with different methods, but I don't think I saw if you exported as a pdf and printed that. have you?
Get in touch and we can try it to help narrow down your search of where the problem resides,
Jason -
Please help with Ir setup.
I have 845 PE Max motherboard with 5 pin Ir conector, my Ir have 5 pin (straight) conector which I used on old 815 6337 Le5 motherboard.
How now I can conect on new motherboard?
Thanks
ScenicNow I conect 4 wires on my motherboard Ir conector lik write in Manuals but I stil can't use my
Actisys Ir 210 L .
It sems to me that is problem in Bios setings.
I use:
Port 2F8/com2
and ASKIR - is this corect? it could be IrDa, HPSIR
Please if enyone can help me with this problem.
Otherwise the Motherboard is good and works wery stabil.
Scenic ?( ?( -
we need to set a print to file printer. wich are the settings we need to use?
Were you actually able to print successfully over the wireless connection? My printer responds wirelessly-- the print try opens, the paper feeder turns, but then I get a 306 error.
I spent hours with tech support yesterday-- two different guys-- and both said I am trying to do the impossible. They say the Base Stations are only designed to deal with printers via USB.
But I don't see why the Base Station should care whether the wireless device is a printer or xbox or what have you, if it is wireless enabled.
It's all very frustrating. -
Please help with Printer problem on MBP
I am running 10.5.1 and am trying to install the software to enable me to scan. I have tried from the original CD, but it doesn't work (i assume this is because it was meant for 10.4). I have also tried downloading from the website but the download always says something like "19mb out of ?" and then eventually the downloads errors out.
Is there any way i can get the scanner to work? can anyone upload this software to me? I know its a lot to ask but im not sure what to do.Don't know what to tell you, but I downloaded the file without any problem. Do you have enough space on your drive for the file? You may have a problem on your drive so you might consider doing the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger and Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
I can't set up a bellsouth account on ipad, using info from Outlook that works fine on a pc
you cant set it up in your mail app on your iphone to my understanding... Microsoft did not make this easy, since it needs a plug in on your computer to work and does not use standard pop3 protocals. Blame Microsoft not Apple on this one
My suggestion
Bookmark and use http://mobile.live.com to check your Hotmail account, it is designed for mobile phones and loads quick -
Please help my printer talk to my computer. An error message pops up whenever I try to print. I have tried the firefox self-help on this topic and it doesn't work. I need direct help with this problem.
message is: "an unknown error occurred while printing" with the yellow icon and exclamation point. this is all it says every time.
-
I need help with printing labels. please
I need help with printing labels. thanks in advance
Welcome to Apple Support Communities.
In Address Book, first select a name or group of names to print.
Then File, Print, select Style, Mailing Labels, then Layout to select a specific target label (such as an Avery number), or define your own... -
Error with printer setup but everyhing seems to be fine
Hi @W6YUM , and welcome to the HP Forums!
I see you are getting an error, but everything seems to work. I would like to try and assist.
Before we start, what error are you getting?
Are you connected wirelessly, or USB?
Is the on the printer or computer?
Please let me know. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
Help with Print Layout Designer
Hi all,
I'm not sure if I should post this here or not, I already posted it in the Business One Forum. Moderator(s) if this is not the proper place please delete it and let me know that it is not the appropriate venue.
I need some help with Print Layout Designer. I am running 2005A SP01, and my customer wants a modification to the Sales Backorder Report. They want to add the column "In Stock" to both the report as displayed on the screen and the printed document. The report rendered to the screen has the In Stock, but it is not checked as visible. I check it and In Stock shows up as designed. The part I am having problems with is the printed document. I opened the PLD from the Backorder Report, and saved it under a different name. I resized some of the columns in the repetitive area (header and data) to make room for the In Stock column. I CAN add the text field Instock as free text and enter "In Stock" as the content. I looked at the "backorder" column in the PLD, and it is a text field with the source System Variable and the variable is 109. I would assume that all I need to do in my added column is to set the source to System Variable and enter the variable number. That is the problem; I can't find the variable number for that column. I looked on the report rendered to the screen with system information on and the variable is "3 #000027825,OnHand". I looked at the Back Order column of the report rendered to the screen and the variable is "3 #000028725,OpenCreQty". I found a spreadsheet that is supposed to contain a list of system variables for 2007A, but the document type for this report is BRDR and that document type does not appear in the list of document types in that spreadsheet. I looked for a similar spreadsheet for 2005A SP01 but didn't find one. I DID find a document "How To Customize Printing Templates with the Print Layout Designer". According to that document, I should be able to get the system variable from the report rendered to the screen with System Information turned on. Can anyone help?
TIA,
SteveI haven't dealt with this before so I can't be certain, but here are my thoughts.
The Backordered Qty is probably a calculated field, so that's why it's a system variable. The In Stock is a defined field, so you probably can use the file and field number, OITM, OnHand. I would look at maybe the stock number or description to see how those are setup on the form instead of the backordered qty field. -
Please help with SIP configuration on 2801 router
Hi All.
Please help me to setup a SIP account. I’m already struggling to do that for a few days, and can’t find out how to finish that. We have 2xISDN lines running, so I need to add a SIP trunk to existing config.
The information from our SIP provider:
We have issued the following DDI range: 018877000 – 99
There is no need to register the DDI’s as these will be offered to your PABX IP address provided to in the completed SIP trunking form.
Configuration details are as follows:
Our Primary Proxy:- 99.234.56.78
Codec supported:- G711Alaw, G729 (G711Alaw is the preferred codec)
Fax Support:- T38 and G711Alaw
DTMF:- RFC2833 and INFO
CLI Method:- Remote-Party-ID
Trunk doesn’t require registration; you just need to send Invite. In cisco this is done through Dial-peer session-target command. We are authenticating your IP address for outgoing calls and incoming calls we then forward to the IP mentioned in the sip form.
This is a SIP configuration on Cisco2801 router (I used outgoing calls only):
translation-rule 10
Rule 0 ^90 0
Rule 1 ^91 1
Rule 2 ^92 2
Rule 3 ^93 3
Rule 4 ^94 4
Rule 5 ^95 5
Rule 6 ^96 6
Rule 7 ^97 7
Rule 8 ^98 8
Rule 9 ^99 9
interface FastEthernet0/0.1
description ***DATA VLAN***
encapsulation dot1Q 1 native
ip address 10.1.1.101 255.255.255.0
interface FastEthernet0/0.2
description ***VOICE VLAN***
encapsulation dot1Q 2
ip address 192.168.22.1 255.255.255.0
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
call start slow
sip
bind control source-interface FastEthernet0/0.2
bind media source-interface FastEthernet0/0.2
registrar server expires max 36000 min 600
voice class codec 1
codec preference 1 g729r8
codec preference 2 g711ulaw
codec preference 3 g711alaw
dial-peer voice 1 pots
description ### External Dialling via BRI ###
preference 7
destination-pattern 9T
translate-outgoing called 10
direct-inward-dial
port 0/0/0
forward-digits all
dial-peer voice 2 pots
description ### External Dialling via BRI ###
preference 2
destination-pattern 9T
translate-outgoing called 10
direct-inward-dial
port 0/0/1
forward-digits all
dial-peer voice 9000 voip
description ** Outgoing calls to SIP **
preference 1
destination-pattern 9T
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target ipv4:99.234.56.78:5060
dtmf-relay rtp-nte
codec g711alaw
no vad
sip-ua
timers connect 100
sip-server ipv4:99.234.56.78
I used debugging commands to troubleshoot the calls.
2801(config-dial-peer)#
094509: Jan 24 09:27:06.204: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=211, Called Number=, Voice-Interface=0x65FA35B4,
Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
094510: Jan 24 09:27:06.204: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=20018
094511: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9, Peer Info Type=DIALPEER_INFO_SPEECH
094512: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9
094513: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094514: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094515: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90, Peer Info Type=DIALPEER_INFO_SPEECH
094516: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90
094517: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094518: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094519: Jan 24 09:27:06.912: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908, Peer Info Type=DIALPEER_INFO_SPEECH
094520: Jan 24 09:27:06.912: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908
094521: Jan 24 09:27:06.916: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094522: Jan 24 09:27:06.916: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094523: Jan 24 09:27:07.012: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086, Peer Info Type=DIALPEER_INFO_SPEECH
094524: Jan 24 09:27:07.012: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086
094525: Jan 24 09:27:07.016: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094526: Jan 24 09:27:07.016: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094527: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862, Peer Info Type=DIALPEER_INFO_SPEECH
094528: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862
094529: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094530: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094531: Jan 24 09:27:07.212: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908621, Peer Info Type=DIALPEER_INFO_SPEECH
094532: Jan 24 09:27:07.212: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908621
094533: Jan 24 09:27:07.216: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094534: Jan 24 09:27:07.216: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094535: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086215, Peer Info Type=DIALPEER_INFO_SPEECH
094536: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086215
094537: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094538: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094539: Jan 24 09:27:07.412: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157, Peer Info Type=DIALPEER_INFO_SPEECH
094540: Jan 24 09:27:07.412: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157
094541: Jan 24 09:27:07.416: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094542: Jan 24 09:27:07.416: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094543: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908621577, Peer Info Type=DIALPEER_INFO_SPEECH
094544: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908621577
094545: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094546: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094547: Jan 24 09:27:07.612: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086215777, Peer Info Type=DIALPEER_INFO_SPEECH
094548: Jan 24 09:27:07.612: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086215777
094549: Jan 24 09:27:07.616: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094550: Jan 24 09:27:07.616: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094551: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094552: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094553: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094554: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094555: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774T, Peer Info Type=DIALPEER_INFO_SPEECH
094556: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774T
094557: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094558: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094559: Jan 24 09:27:10.711: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=90862157774, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094560: Jan 24 09:27:10.711: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094561: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094562: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094563: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
094564: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
094565: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094566: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094567: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094568: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094569: Jan 24 09:27:10.719: fb_get_reject_cause_code: ERROR cause_code NULL
094570: Jan 24 09:27:10.727: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam " <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:10 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397230
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094571: Jan 24 09:27:11.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:11 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397231
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094572: Jan 24 09:27:12.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam " <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:12 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397232
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094573: Jan 24 09:27:14.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam" <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:14 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397234
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
I made some changes in the router configuration.
I removed FA0/0.2 Voice interface from Voice service voip configuration (bind control source-interface FastEthernet0/0.2 and bind media source-interface FastEthernet0/0.2). And now it’s using ip address 10.1.1.101 (data ip).
The debugging is changed now. I can send and receive a respond from SIP server. But It shows an error: SIP/2.0 404 Not Found
Then it moves to ISDN line, and use this line to make a call.
102988: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774T, Peer Info Type=DIALPEER_INFO_SPEECH
102989: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774T
102990: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
102991: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
102992: Jan 24 14:45:47.290: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=90862157774, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
102993: Jan 24 14:45:47.290: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
102994: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
102995: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
102996: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
102997: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
102998: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
102999: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
103000: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
103001: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
103002: Jan 24 14:45:47.298: fb_get_reject_cause_code: ERROR cause_code NULL
103003: Jan 24 14:45:47.310: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK4875CB9
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Seam" <sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 14:45:47 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 3989446920-1171263969-2466545983-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327416347
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 2438 9821 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 19412 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
103004: Jan 24 14:45:47.354: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 404 Not Found
From: "Sam "<sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>;tag=7fad61f03708-100007f-13c4-55013-a0142-10fd12c8-a0142
Call-ID: [email protected]
CSeq: 101 INVITE
Via: SIP/2.0/UDP 10.1.1.101:5060;received=88.99.77.44;branch=z9hG4bK4875CB9
Content-Length: 0
103005: Jan 24 14:45:47.362: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK4875CB9
From: "Sam " <sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>;tag=7fad61f03708-100007f-13c4-55013-a0142-10fd12c8-a0142
Date: Tue, 24 Jan 2012 14:45:47 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
103006: Jan 24 14:45:47.374: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0/1, TEI 96 changed to up
103007: Jan 24 14:45:51.313: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=, Called Number=211, Peer Info Type=DIALPEER_INFO_SPEECH
103008: Jan 24 14:45:51.313: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=211
103009: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
103010: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=20018
103011: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=, Called Number=0862157774, Peer Info Type=DIALPEER_INFO_SPEECH
103012: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=0862157774
103013: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)
103014: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
Result=NO_MATCH(-1)
103015: Jan 24 14:46:08.815: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0/1, TEI 96 changed to down
2801(config-dial-peer)#
Then I removed SIP-UA as I was told there is no registration necessary, only Dial-peer configuration.
But it didn’t affect anything.
Then I add translate-outgoing called 10 command to dial-peer 9000, nothing happened.
Really stuck and don't know where to look at.
Any help will be highly appreciated.
Thanks.Hi Dan.
Yes, I saw that RTP debugging, but what can I change there? Maybe I need to open more ports on ASA for RTP like 19412?
I use Cisco ASDM for ASA to make changes.
There are static NAT rules for: Server source IPs(10.1.1.100) to Outside(translated IPs, 88.99.77.44) for a few ports.
Also I added Security policy access rules for LAN: Any to SIP, and Outside: SIP to any.
For NAT:
I can't add this: for LAN: STATIC ROUTER IP 10.1.1.101 (AS SOURCE) UDP 5060 TO OUTSIDE IP 88.99.77.44
(AS TRANSLATED) UDP 5060
Because there is already translation for the Server.
Debugging looks like that now. There is no Received: SIP/2.0, but I can make an outside call with no audio.
116013: Jan 25 15:28:25.584: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
116014: Jan 25 15:28:25.584: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
116015: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
116016: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
116017: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
116018: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
116019: Jan 25 15:28:25.588: fb_get_reject_cause_code: ERROR cause_code NULL
116020: Jan 25 15:28:25.600: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:25 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505305
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116021: Jan 25 15:28:26.096: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:26 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505306
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116022: Jan 25 15:28:27.096: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:27 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505307
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116026: Jan 25 15:28:57.092: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam" ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:57 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389preference 1771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505337
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
I'll add Incoming dial-peer now.
Not sure what kind of NAT rule should I put into ASA to allow in and out sip traffic.
Appretiate your help.
Thanks a mill.
Maybe you are looking for
-
Adding wireless capability to HP Laserjet Pro M1536DNF
I presently have an Hp Laserjet 3052 to which I do not believe I can add wireless capability. I am considering a Laserjet M1535DNF. The spec sheet says that wireless can be added by using a separate accessory. Is this a reasonable purchase if I must
-
Leopard, Time Machine, D-Link Dir 655, 1.5TB Ext.HD
Alright as you see in my title Thats what i have from a Macbook Pro & Windows Vista. I want to be able to Backup thru both the OS. 1. Do I need to partition the drives to NTFS (Vista OS) and MAC OS Journaled (Time Machine)? 2. Is the setup possible?
-
DVD looks great on CRT... awful on Plasma
Is it possible to write video to a DVD that will look good on both CRT and Plasma/LCD televisions? When burning a recent video (24pA, anamorphic, SD) to DVD, the result looks fantastic on an old 13-inch CRT I have, but it looks absolutely awful on my
-
Solaris 10 U8 autofs homes not working
On three fresh installs of U8, home directories are not automounting. Has this been changed in any way? This is using files based users. Autofs shows online and there are no errors in the SMF log. Any ideas? Charles
-
NFR Agent Crashes Halts Server
I've had a NFR server running for a couple of months now and keep experiencing a server seizure that the only way that I can mange to fix it is to restart the server. Novell File Reporter as installed by a consultant and operationally it runs fantast