Please help with restoring different apps and their data between 2 iPads

I just bought a new iPad Air 2 . I currently have 2 iPads, 1st gen and iPad 2nd, each with its own set of apps and their data. I backed up each older iPad manually as a full backup. I created a separate library for one of them when doing this. Now I want to transfer iPad 1st gen apps and data to iPad 2nd, so I reset iPad 2nd to factory and then restored from the manual back up of the iPad 1st gen and it seems to work fine. Before that I had backed up iPad 2nd's current data. So now I now I want to transfer the iPad 2nd apps and data to the new iPad Air. I selected the backup by the time stamp that I had backed up iPad 2nd. I didn't know how to rename each iPad to something unique. It restored from backup, but it's all the apps and data from my iPad 1st gen backup, not iPad 2nd.
I'm utterly confused. Even when I have the separate iTunes library open it shows all the manual backups I performed, so it's not truly a separate library. Do I need to manually install/remove the various apps on the newer iPad?

If you only have 1 file per quarter, one obvious thing to do would be to edit out the time in between plays, the time-outs, and the like. That is easily done in iMovie.
Having said that, importing (and exporting) in high definition takes time, and your times do not seem unreasonable.
Message was edited by: AppleMan1958

Similar Messages

HT1553 Hi. My ipad froze with a message that iCloud hasn't been backed up in 11weeks. Please help with steps to unfreeze and back up the ipad.

Hi.
My iPad froze with a message "icloud backup" I clicked ok but it will not budge or unfreeze for me to do anything. I tried to power it off with no luck. Please someone help.

You posted in the wrong forum, Snow Leopard. You need to post in the iPad forums. It's where the iPad users hang out at.

When I try to sync photos, I followed all the steps, picked one folder. When I hit "apply" I get this error message: Are you sure you want to remove 30 apps from iPad. This will delete these apps and their data from the iPad. What have I done wrong

When I try to sync photos or music, I followed all the steps, picked onle folder, not the whole library. When I hit "apply" I got this message:
Are you sure you want to remove 30 apps from iPad. This will delete these apps and their data from the iPad" What can I change to just download the photos and not interfere with the apps?
(By the way, the memory is not even one quarter full)
Thanks for your help - Pat

I have the same problem. I updated my mac to 10.5, which then had me update apps like itunes, etc. then it wanted me to sync my purchased music to my ipad before i updated the ipad...which worked ok. then when i was syncing the photos i got the same message when i hit "apply" asking are you sure you want to delete the 12 apps from the ipad - clicked "no" and brought me back to the original screen. Got the same message when trying to move them from the hard drive to the ipad. WHat is going on and how do I correct this? Thanks

HT201272 Dear Apple – Please help me restoring my purched iTunes tracks on my iPad

Dear Apple – Please help me restoring my purched iTunes tracks on my ipad mini

We are fellow users here on these forums, you're not talking to iTunes Support or Apple.
Music can't currently be re-downloaded in all countries. If you are in a country where music can be redownloaded, and if it's still in the store, then it will show in the Purchased tab in the iTunes store app on your iPad. If some of your music purchases show there but not all, then check to see if any are hidden : http://support.apple.com/kb/HT4919
If you aren't in a country where you can re-download music, or if it's no longer in the store, then you will need to re-sync it from your copies on your computer's iTunes (or your backup of your downloads). If you haven't got a copy of your library anywhere then for the tracks that are still in the store you can try contacting iTunes Support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Trying to sync my iPad and get the message that "all existing apps and their data will be replaced"

Previously my Windows 7 laptop didn't recognise my iPad but I persevered and now am getting the message when trying to update the iOS that if I sync, "all existing apps and their data will be replaced" so I'll lose everything I've bought since I last synced (which is a while). How can I back up my apps before syncing fully and then updating. I have 'transferred purchases' using the File menu but still getting the message.
Message was edited by: annielevo

Sounds like you have created a new library somehow. Ideally you would restore your old library and the problem would go away. If that is not possible then you should be able to:
Backup the device to the computer
Transfer your purchases into an authorized library
Recover any other media using third party tools as suggested in this post from forum regular Zevoneer
Download remaining past purchases from iTunes in the Cloud, where available
Restore the device from the backup
This process should switch the association of the device to the new library, preserving the data and settings in your apps.
May also be prudent to attempt a backup to iCloud directly from the device before you start... Settings > iCloud > Storage & Backup > iCloud Backup > On. It won't save any media but it would preserve the general account settings and documents in case anything goes wrong while you are trying to extract your other data.
When you get it all fixed, make a backup!
tt2

I have just updated to the latest io5 and have lost apps and their data, can i reverse the new update to get back what i had on there?

i have just updated to the latest ios 5 and have lost apps and their data, can i reverse the new update to get back what i had on my ipad?

There is no need to do that, I had the same problem pal! Just do this and all should be fine!
Delete one of the app's and re-install it, then for some reason everythign is restored to as it was!
Hope you get on fine, let me know!
Thanks
Dan

HT1727 How do you transfer apps and their data (i.e. preferences, game saves etc.) from an old PC to a new Mac?

My iPhone 4 was originally synced with the PC and I'm now trying to migrate it all over to the Mac. Currently, every time I try to sync the iPhone with the new Mac, I get a message saying "All existing apps and their data will be replaced by apps on this computer". I've used the "Transfer Purchases" option so the apps on the phone are also on the Mac.

Migrate your library from the PC to the Mac. Normally all you need to do is copy teh entire iTunes folder from one machine to the other over a network or using an external drive.
If your PC is no longer functional see Recover your iTunes library from your iPod or iOS device.
tt2

Please help with restoring contacts on Iphone 4S

Still haven't gotten an answer to my question yet. I want to perform a complete restore on my 4S before upgrading to IOS 6. The only data I want transfered over are my contacts. Can I do this without restoring from a backup via Itunes on my PC? Someone told me awhile ago that the only way to get contacts back on your iphone is by restoring from a backup. Please help. Thanks

if you're in the UK try a company called fixmyiphone. I had the same issue - Apple told me it was not repairable. I tried the 'hairdryer trick' (look it up on youtube) but it did not work and finally I found this company - fixed it on the spot for £40. Highly recommend. An iPhone without wifi is called an iBrick.....

Please help with the FOR loop and the array..

I was trying to place some words in the Movie Clip
"TextPanel" and set a
random position to each of them.
But it's not working.
1) I created a Movie Clip "word" and inside that MC I created
a text field
and gave it an identifier "textFiled".
2) The linkage name for Movie Clip "word" I set to "word".
3) In the actionscript I created an Array called "aWords".
4) Then I created a FOR loop that should
place (attach) Movie Clips "word0", "word1", "word2" and
"word3" to the
movie clip TextPanel, and set the textField text for each of
them to the
text from the Array.
But the script attaches 4 Movie Clips with a name
"Undefined", instead of 4
different names (from the Array).
What is wrong with this script?
var aWords:Array = [apple,banana,orange,mango];
for(i=0;i<aWords.length;i++){
var v = TextPanel.attachMovie("word","word"+i,i);
v.textFiled.text = aWords
v._x = randomNumber(0,Stage.width);
v._y = randomNumber(0,Stage.height);
Thanks in advance

But in my Post I already wrote v.textFiled.text = aWords
so I don't understand what were you correcting..
And one more:
I have tested it by changing the
v.textFiled.text = aWords; to v.textFiled.text = "some
word";
and it's working fine.
So there is something wrong with the Array element, and I
don't know why..
"aniebel" <[email protected]> wrote in
message
news:ft2d5k$lld$[email protected]..
> Change:
> v.textFiled.text = aWords;
>
> to:
> v.textFiled.text = aWords
>
> It needs to know which element inside the array you want
to place in the
> textfield (or textfiled) :)
>
> If that doesn't work, double check that your instance
name is correct
> inside
> of "word".
>

"all existing apps and their data will be replaced with the apps from.....

..this library" i only have 3 apps showing in the "ipod touch apps" sidebar on the left, and i don't know if i click sync just to get them on the ipod touch, if they will replace EVERY other app on the ipod. before there used to be a list of all the apps i downloaded but its not showing now. and i cant even move around the apps on the screen on the right that shows what the ipod screen looks like.

Thanks MikePremium, but what happens after the sync is that I can see all the apps appear in the "Sync Apps" section, but grayed out, and then iTunes asks for my credentials but then it tells me it can't communicate with the store and to try again later.
If I try to check the "Sync Apps" box, it gives me the same warning message as before about how my apps will be replaced by the apps from "this library".
What do I do now? I synced to iTunes last week. Got a few new apps directly into my IPT since, but now I'm in the same situation as you guys. Now that I think of it, there may have been an iTunes update between the last time I synced and now. I subgrouped many apps and I can see the subgroups on the representation of my IPT in iTunes.
The drag about the message, is that if it DOES replace the apps, some new data in each of these apps will be lost.

Please help with correcting calling class and method errors

Hi All,
I have created a game (like battleship) for 2 tanks. I can't seem to connect the classes and methods to get the values for the last die face rolled; last direction rolled on a 4 headed dice; the x and y position for each tank; the armour value and the firePower (or hit value) to print.
Each row of these values is supposed to print 50 times using a while loop.
(N.B. The code is appended below my name.)
Could anyone please help me? I would be most grateful. Thank you.
Steve
import java.util.*;
class Client
static Die die;
static Direction dir;
static Tank tk1;
static Tank tk2;
public static final
void main( String[] argv)
die = new Die();
dir = new Direction();
tk1 = new Tank();
tk2 = new Tank();
int lastFace;
int setfaceLast;
int x;
int y;
int armourVal;
int firePower;
int battleNum=0;
int battles;
int moves = 0;
System.out.println("Tank");
System.out.println("'\t' Number");
System.out.println("'\t' Dir");
System.out.println("'\t' xValue");
System.out.println("'\t' yValue");
System.out.println("'\t' Armour");
System.out.println("Firepower"+'\n');
int i=0;
//int getLastFace();
//int LastDirName();
while (i <= 50);
int XPos;
int YPos;
Pos p = new Pos();
p.setXPos(x);
p.setYPos(y);
System.out.println ("'\t' Tank 1-");
//System.out.println ( die.getLastFace());
//System.out.println( dir.getLastDirName());
System.out.println(Pos(x));
System.out.println(Pos(y));
System.out.println(armourVal);
System.out.println(firePower+'\n');
System.out.println ("Tank 2-");
System.out.println ( lastFace);
//System.out.println(LastDir);
System.out.println(x);
System.out.println(y);
System.out.println(armourVal);
System.out.println(firePower+'\n');
moves++;
System.out.println(" '\n' + BATTLE");
class Tank
public static final int MINGRID;
public static final int MAXGRID;
static Die die = new Die();
static Direction dir = new Direction();
private static int battleCount;
private static int moveCount;
private int x;
private int y;
private int armourVal;
private int firePower;
public Tank()
int MINGRID=-10;
int MAXGRID=10;
battleCount=0;
moveCount=0;
x=0;
y=0;
armourVal=10;
firePower=1;
public
int getmove()
die.roll();
dir.roll();
dir.getLastDir();
die.getLastFace();
int x;
int y;
int Pos;
switch( dir.getLastDir() )
case Direction.UP:
y += die.getLastFace();
break;
case Direction.DOWN:
y -= die.getLastFace();
break;
case Direction.RIGHT:
x += die.getLastFace();
case Direction.LEFT:
x-= die.getLastFace();
break;
if ( x > MAXGRID )
x = (2 * MAXGRID) - x;
else if ( x < MINGRID )
x = (-2 * MINGRID) - x;
if ( y > MAXGRID )
y = (-2 * MAXGRID) - y;
else if ( y < MINGRID )
y = (-2 * MINGRID) - y;
if ( x == -3 && y == -3 )
firePower++;
System.out.println("Yipee - more firepower.");
if ( x == 3 && y == 3)
this.armourVal += 10;
System.out.println("Yipee - more armour.");
return Pos;
//printDetails();
public boolean getcontinueBattle(Tank tk2)
moveCount++;
if ( x == tk2.x && y == tk2.y)
battleCount++;
System.out.println("Battle");
tk2.armourVal -= firePower;
armourVal -= tk2.firePower;
if (tk2.armourVal < 0 )
int moveCount, battleCount;
return false;
if ( armourVal < 0 )
int moveCount, battleCount;
return false;
return true;
public int getprintDetails()
int ptDet;
return ptDet;
class Direction
private int lastFaceDir;
private Random rnd;
public static final int UP = 1;
public static final int DOWN = 2;
public static final int LEFT = 3;
public static final int RIGHT = 4;
String direction;
private
int getRandomNum()
int raw = rnd.nextInt();
raw = Math.abs( raw );
raw %= 4;
raw++;
return raw;
public
Direction()
rnd = new Random();
roll();
public
int roll()
lastFaceDir = getRandomNum();
if (lastFaceDir == UP)
direction = "up";
else if (lastFaceDir == DOWN)
direction= "down";
else if (lastFaceDir == LEFT)
direction = "left";
else if (lastFaceDir == RIGHT)
direction= "right";
return lastFaceDir;
public
int getLastFaceDir()
return lastFaceDir;
}// end class
class Die
private int lastFace;
private Random rnd;
private
int getRandomNum()
int raw = rnd.nextInt();
raw = Math.abs( raw );
raw %= 6;
raw++;
return raw;
public
Die()
rnd = new Random();
roll();
public
int roll()
lastFace = getRandomNum();
return lastFace;
public
int getLastFace()
return lastFace;
}// end class

I got this sorted!
I unzipped the JAR and loaded the classes individually - so now the "reference" issue went away. Instead I now have a new problem, but I will post that seperately.

Help with MIRO Badi's and Translation Date (Exchange Rate Date Reference)

Dear experts
This is a problem I have read a lot about, but none of the answers work properly and I wanted to create a new thread in order to try to compile a final answer for this problem (at least in version 6.0)
As you know Standar SAP uses posting date as translation date in MIRO for foreign currency.
This is not always true (imagine Crude Imports with 3 dates: Invoice date, posting date and Bill of Lading date. The last one happens to be the fiscal date for exchange rate in my county and the other two are also mandatory).
I am proposing thus to use 3 dates: Document date as invoice date; posting date as posting date and Invoice Receipt Date
(REINDAT - RBKP) as Bill of Lading date. I would like to implement this third date as translation date.
Lot of ways to do it, but none works properly as for the end user it is complicated to enter data in a certain way so that BADI's work properly. I have implemented note 574583 and only works with some restrictions.
I have also used some more BADI's like MRM_HEADER_CHECK, FI_TRANS_DATE_DERIVE, INVOICE_UPDATE,... and all of them have some restrictions (depending always in data header taps data introduction or saving the exchange rate properly in MM TABLES but not in FI TABLES).
I would really appreciate if anyone could help with this, ensuring that the Badi get's always the data and makes it work with no screen selection dependance.
Thanks in advance.

Dear All,
I have found the solution with the help of ABAPer. The system has a bug for which SAP has given a Sap Note no 22781.
Actually what happened in the Invoice is, the system by default fetched the exchange rate for the Exchange Rate Type 'M' for the rate last maintained. Since we were using different Exchange rate it did not match. Also we came to know about the difference only because off-late the users had stopped updating Exchange Rate 'M' .
The funny part is in the Invoice if we click on each tab at the header and come back to the first tab where we find the Exchange rate for accounting, the system picks up the actually rate as per the Exchange Rate maintained.
Regards,
Karthik.

How can I restore an app and its data from an old ipad to a new ipad without restoring from backup?

When I purachsed and iPad 2 to replace my old iPad I did not want to restore it from backup for obvious reasons. However, there are apps that have data stored in them that I have lost the data for, what can I do to get the app and data back on the new iPad without losing the data that was already in the app?

griffaroo wrote:
When I purachsed and iPad 2 to replace my old iPad I did not want to restore it from backup for obvious reasons.
The reasons may be obvious to you, but it makes no sense to me. I would think that you would want all of the content that you had transfered onto your new iPad.
However, there are apps that have data stored in them that I have lost the data for, what can I do to get the app and data back on the new iPad without losing the data that was already in the app?
If you lost the data in the apps, you can't get it back unless you restore from a backup - assuming that the backup DID have that data in the apps..
The only way that you can get the apps PLUS the app data onto the new iPad is to restore the new iPad from a backup of the original iPad and sync the apps back onto the new iPad if necessary.

How to transfer iPhone apps and their data to new MacBook Pro?

I just got the new Retina Macbook Pro. Before, I synced my iPhone with my iMac. Now I want to sync my iphone with my new RMBP instead. I transfered my music and applications to the new Mac. My music syncs to my iPhone just fine, however, if I click to check to sync my iPhone applications to this computer then a warning message pops up saying all my existing apps and data will be deleted. I aready clicked transfer purchases to my new Mac, so all my apps are already on the computer.
But how do I get my apps to sync with my new Mac, without deleting all my apps data?

Follow steps 1 ~ 9 here:
https://discussions.apple.com/docs/DOC-3141

Need a little help with Slimbox (Lightbox clone) and Spry data sets

Hello guys!
First of all let me say that I'm not a programmer in any way,
shape or form, and somehow I managed to build me a dynamic
thumbnail gallery that reads data from an XML file and displays it
on my webpage using a Spry data set and a slider widget (yay!)
This is of course only thanks to the many great examples
provided by the Adobe Spry team, and me being stubborn enough to
keep at it, even though I don't really understand what I'm doing :D
But I got to this point where I have basically everything
working, except that I can't get the Slimbox (Lightbox clone)
script to work with the Spry-generated thumbnail gallery.
From what I could understand from other threads on this
forum, is that I need to add an observer somewhere, only that I'm
not sure where and how (those threads are pretty old and the
examples aren't available anymore).
I'm sure you guys know what I'm talking about, anyway, here's
what I got so far:
http://www.riotdesign.com.ar/misc/gallery/test1.html
I have the thumbnail gallery populated from the external XML
file, a basic page navigation using the Sliding Panels widget, and
the Slimbox script which works only on the static test image.
Okay I guess that's it for now, sorry for the long post and
of course any help with this will be GREATLY appreciated :)
Thanks & bye!

Kev,
Where exactly does the .evalScripts = true; text need to go?
Does it go in the href call?
<a href="ManageNotes.asp" title="Manage Notes" onClick="this.blur();
Modalbox.show(this.href, {title: 'Manage Notes', width: 575}); return false;">View your notes.</a>
Thanks for any assistance.
J Bishop

Please help with restoring different apps and their data between 2 iPads

Similar Messages

Maybe you are looking for