Please help with the Universal Dock issue!!!

Hi,
I recently purchased a universal dock for my iphone 3g. It works great. I just had one question. When my iphone is sitting on it for lets say 20 - 30 minutes. Then if i press the buttons on the remote. nothing happens! If I then press the home button while it is on the cradle then, the remote, it plays music. There after lets say if I stop stop the music through the remote and again press the remote button after a few minutes it starts playing. So what happens after a long time. Why do i have to press the home button on the iphone for the remote to work. Is that how it is supposed to work???
Thanks,
Sunil

Hello! Am i the only one facing this issue?????

Similar Messages

Please share your experience with the universal dock for iphone 3g

Hi There,
1. Can people share their experience of the universal dock with the iphone 3g adapter. My concern is that does the tight fit scratch the black lower back of the iphone plastic everytime we remove it or put it in? OR is there enough gap for the iphone to slip in and out without scratching.
2. Anyone having issues with the universal dock or does it work fine for most?
thanks in advance,
cheers,
Sunil

Thanks for your advice.
I recently purchased a universal dock for my iphone 3g. It works great. I just had one question. When my iphone is sitting on it for lets say 20 - 30 minutes. Then if i press the buttons on the remote. nothing happens! If I then press the home button while it is on the cradle then, the remote, it plays music. There after lets say if I stop stop the music through the remote and again press the remote button after a few minutes it starts playing. So what happens after a long time. Why do i have to press the home button on the iphone for the remote to work. Is that how it is supposed to work???
Thanks

Can you view the iPod menus on your television with the Universal Dock?

I recently bought a decent universal dock knock off for my iPod, but one of my biggest gripes is that I am not able to view my iPod menus screen on my television. Does the Apple Universal Dock give you this ability?

Hello there,
No, there is no such feature with the universal dock. If you wish to a have a dock with this kind of functionality, maybe check out this one below.
http://www.amazon.com/DLO-009-9765-HomeDock-Deluxe-iPod/dp/B000ELDX2W
Or this one.
http://www.amazon.com/Ipod-Ready-Pioneer-Elite-Receivers/dp/B000IWL77U
Hope this helps.
B-rock

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be ab

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.

Adobe - Lightroom : For Macintosh
Hal

Does Av digital adapter works with the universal dock for remote control?

if I only connect the Lightning to 30 pin adapter to the universal dock for remote control it works so good with music, spotify, Netflix, YouTube etc.
but if I add the av digital lightning adapter to watch on Tv, the dock and remote control don't work anymore what can I do? I want to watch stuff on tv and use the IR dock for remote control please help me what's going wrong?

Thanks for your advice.
I recently purchased a universal dock for my iphone 3g. It works great. I just had one question. When my iphone is sitting on it for lets say 20 - 30 minutes. Then if i press the buttons on the remote. nothing happens! If I then press the home button while it is on the cradle then, the remote, it plays music. There after lets say if I stop stop the music through the remote and again press the remote button after a few minutes it starts playing. So what happens after a long time. Why do i have to press the home button on the iphone for the remote to work. Is that how it is supposed to work???
Thanks

Apple Composite AV cables with the universal dock

Hi,
I have a classic iPod 80gb w/video (i think it's 5th generation)
I recently purchased the Apple composite AV cables to listen to my ipod via the RCA inputs on my stereo's receiver. This works well.
It also has a USB cable attached so I can charge the ipod while I listen to music.
I wanted to purchase the universal dock so I can replace my old CD changer and have a nice looking iPod sitting in a nice dock where the cd changer used to be. Plus the remote would come in handy.
Since my composite cables play music and charge I figured I'd just plug the 30-pin adapter into the back of the dock and pop my ipod into the dock (i realize I'll probably need a dock apadter for my classic ipod) and i'd be able to play music and charge the ipod.
I spoke with an Apple salesmen who says that this woun't work, I need to buy a headphone (3.5 mm) to RCA adapter cable for the audio and the USB 30pin plug is only for charging.
But right now, without the dock it does both, so does anyone know if this sales person is correct? They had to do a lot of research so I know he didn't know first-hand.
Has anyone tried this?
I'd hate to have to buy a 3.5 mm to rca cord and then not use the 39 cables I just purchased.
Thanks so much for any help.

Your 3 rca connector comes with video (yellow) and audio (red and white) and the other one is usb which you can use for charging if you plug the charger on it. no need to plug 3.5mm mono jack.

Can anyone help with the java applet issue

Hello everyone,
This is my first thread in this forum,
I need a little help with the form developer...
I have oracle 9i db , 9i form developer
I don't want to run the form i created as a java applet
HOW IS THAT DONE i.e NOT IN THE INTERNET EXPLORER?????????
***IF ITS POSSIBLE

Hello,
I don't want to run the form i created as a java applet
No chance, because the Web Forms client is an applet and cannot be anything else.
Francois

Please help with the GUI quiz question!

Hi Folks,
Please help me with the code for the following GUI.
The display window of the application should have two panels at the top level (you could have multiple panels contained within a top-level panel). The first top level panel should have a grid or a border layout and should include apart from various label objects: 1) a textfield to store the info entered, 2) a combobox 3) a combobox or a list box , 4) a radio-button group , 5) a combo box 6) checkboxes for additional accessories, and 7) checkboxes .
The second top-level panel that is placed at the bottom of the window should have a submit button, a clear button and a textarea for output.
Thanks a lot.

Please be a little more explicit about what you're doing, what you expect to happen, and what you actually observe.
Please post a short, concise, executable example of what you're trying to do. This does not have to be the actual code you are using. Write a small example that demonstrates your intent, and only that. Wrap the code in a class and give it a main method that runs it - if we can just copy and paste the code into a text file, compile it and run it without any changes, then we can be sure that we haven't made incorrect assumptions about how you are using it.
Post your code between [code] and [/code] tags. Cut and paste the code, rather than re-typing it (re-typing often introduces subtle errors that make your problem difficult to troubleshoot). Please preview your post when posting code.
Please assume that we only have the core API. We have no idea what SomeCustomClass is, and neither does our collective compiler.
If you have an error message, post the exact, complete error along with a full stack trace, if possible. Make sure you're not swallowing any Exceptions.
Help us help you solve your problem.

Can anyone please help with the 2.3 update in UK?

Can anyone please help? I have an unbranded x10 in the UK. PC companion constantly tells me my phone software is up to date (with android 2.1) so I cannot upgrade to 2.3. I've tried all the tips on the SE support page like deleting the database content and looking for the setting to update the phone next time it's connected which doesn't exist (very informative SE!). I'm not keen on this independent software installation through the rapidshare download, it seems full of glitches looking at the forums. http://www.sonyericsson.com/update/?lc=en&cc=gb&pid=xperiax10 This link clearly tells us the update is available through PC companion, no joy for me though. Any help is welcome.

Have a look at this and check your version number see if its listed
http://forum.xda-developers.com/showthread.php?t=1186045
As for generic roms you have probable read about custom roms
See this thread it is a stock SE rom not a custom rom and will give you just that a stock SE rom if you want
http://talk.sonyericsson.com/thread/19762

Please help with an urgent purchase issue

Hello all
I have finally decided that since I am planning a trip to US it would be a wonderful opportunity to purchase a Mac and fulfill my dream!
Despite the fact that I was thinking of purchasing an iMac for a desktop computer (my office laptop is a windows 8) I ended up in selecting a MacBook Pro 15 retina as a desktop replacement combining increased portability and enhanced specifications. The use is strictly personal meaning transferring and listening to music, home movies editing, watching movies, Internet and generally transferring all my home staff to apple ecosystem using also external drives.
Now the serious staff: since I have a one time opportunity ( the trip is not repetitive) I would extremely appreciate your help in the following:
- my current selection is with 2,7 ghz quad core i7 with 8 gb ram and 512 flash. How is this configuration compared to the basic one? Basically I chose the 2.7 because of the relatively small price difference and the increased hard drives because of future programs installations (all storage will be done in time capsule and external drives)
- since I have to purchase it now when Mavericks are released will the update require payment (based on your experience from the past)
- how do the above compare to the new MacBook Air (if it is worthwhile I would go to an enhanced version of the 13")
My true apologies for the length of my message but any help is invaluable to solve my confusion
Many thanks in advance.

- my current selection is with 2,7 ghz quad core i7 with 8 gb ram and 512 flash. How is this configuration compared to the basic one? Basically I chose the 2.7 because of the relatively small price difference and the increased hard drives because of future programs installations (all storage will be done in time capsule and external drives)
- since I have to purchase it now when Mavericks are released will the update require payment (based on your experience from the past)
- how do the above compare to the new MacBook Air (if it is worthwhile I would go to an enhanced version of the 13")
My true apologies for the length of my message but any help is invaluable to solve my confusion
Many thanks in advance.
We do not know yet what Mavericks will cost or what machines Apple will update for free but based on past experience it will probably not be a free update unless you purchase the computer after Mavericks has been released to the public. As recent operating system upgrades have been relatively inexpensive - Mountain Lion was $20 - I wouldn't worry a lot about this.
I agree with your choice of the 512GB SSD. The bigger the better as application files and data are only going to get larger. The faster processor may not make enough difference for your intended uses to make it worth the extra money however.
The retina display on the MacBook Pro is quite a bit better than the MacBook Air.
Best of luck.

Please help with the URL class

Hello,
I am trying to write a Java app that will take a url and download it.
I believe you can do this with the URL class but I don't understand how to. For example, if the http url location points to a picture file, how would I code the app to retrieve this picture and save it to a specified directory?
Also, is there a way that my java app could open another program, let's say Microsoft Internet Explorer?
Please be as specific as possible, thanks!

You'll see below an example to download a file
private static String copyFile (String url, String nomFichier){
     // construction du fichier de sortie
     File outputFile = new File(repertoire + "\\fichiers\\" + nomFichier);
     // si le fichier existe d�j�, il ne sert � rien de le t�l�charger !
if (outputFile.exists())
     return "fichiers/" + nomFichier;
          try {
     HttpURLConnection connect = (HttpURLConnection)new URL(url).openConnection();
boolean connected = false;
while (!connected){
try {
connect.connect();
connected = true;
     catch (java.io.IOException e1) { System.out.print("...Tentative de connection"); }
DataInputStream reader = new DataInputStream(
connect.getInputStream());
     FileOutputStream out = new FileOutputStream(outputFile);
     int length = 1024;
     byte[] buf = new byte[length];
     int offset = 0;
     long offsetCourant = 0;
     int nb=0;
     while ((nb=reader.read(buf,offset,length))!= -1) {
          out.write(buf,0,nb);
     out.close();
     catch (java.net.MalformedURLException e) { System.out.println("pb d'url"); }
     catch (java.io.IOException e1) { System.out.println(e1.getMessage()); }
     return "fichiers/" + nomFichier;
}

Please help with the query (INSERT RETURNING BULK COLLECT INTO)

I am trying to write a query inside the C# code where I would insert values into a table in bulk using bind variables. But I also I would like to receive a bulk collection of generated sequence number IDs for the REQUEST_ID. I am trying to use RETURNING REQUEST_ID BULK COLLECT INTO :REQUEST_IDs clause where :REQUEST_IDs is another bind variable
Here is a full query that use in the C# code
INSERT INTO REQUESTS_TBL(REQUEST_ID, CID, PROVIDER_ID, PROVIDER_NAME, REQUEST_TYPE_ID, REQUEST_METHOD_ID, SERVICE_START_DT, SERVICE_END_DT, SERVICE_LOCATION_CITY, SERVICE_LOCATION_STATE, BENEFICIARY_FIRST_NAME,
BENEFICIARY_LAST_NAME, BENEFICIARY_DOB, HICNUM, CCN, CLAIM_RECEIPT_DT, ADMISSION_DT, BILL_TYPE,
LANGUAGE_ID, CONTRACTOR_ID, PRIORITY_ID, UNIVERSE_DT, REQUEST_DT, BENEFICIARY_M_INITIAL,
ATTENDING_PROVIDER_NUMBER, BILLING_NPI, BENE_ZIP_CODE, DRG, FINAL_ALLOWED_AMT, STUDY_ID, REFERRING_NPI)
VALUES
(SQ_CDCDATA.NEXTVAL, :CIDs, :PROVIDER_IDs, :PROVIDER_NAMEs, :REQUEST_TYPE_IDs,
:REQUEST_METHOD_IDs, :SERVICE_START_DTs, :SERVICE_END_DTs, :SERVICE_LOCATION_CITYs,
:SERVICE_LOCATION_STATEs, :BENEFICIARY_FIRST_NAMEs, :BENEFICIARY_LAST_NAMEs, :BENEFICIARY_DOBs,
:HICNUMs, :CCNs, :CLAIM_RECEIPT_DTs, :ADMISSION_DTs, :BILL_TYPEs, :LANGUAGE_IDs,
:CONTRACTOR_IDs, :PRIORITY_IDs, :UNIVERSE_DTs, :REQUEST_DTs, :BENEFICIARY_M_INITIALs,
:ATTENDING_PROVIDER_NUMBERs, :BILLING_NPIs, :BENE_ZIP_CODEs, :DRGs, :FINAL_ALLOWED_AMTs,
:STUDY_IDs, :REFERRING_NPIs) RETURNING REQUEST_ID BULK COLLECT INTO :REQUEST_IDs
However, when I run this query, it gives me a strange error ORA-00925: missing INTO keyword. I am not sure what that error means since I am not missing any INTOs
Please help me resolve this error or I would appreciate a different solution
Thank you

You cannot use (and do not want to in this case) the BULK COLLECT.
create table for_testing
   the_id      number not null primary key,
   some_data   number
declare
   l_return_value for_testing.the_id%type;
begin
4
   insert into for_testing
      the_id,
      some_data
   values
      1,
      5
   returning the_id into l_return_value;
   dbms_output.put_line('the return values is ' || l_return_value);
end;
20 /
the return values is 1
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.02
TUBBY_TUBBZ?Is a simple example. In the future, please use the tags to preserve formatting on your code like i have so it remains readable .

Please help with the versioncue problem.

I know this is not the right place to post this but please, I need fast help. When I open a project in Photoshop CS3 it says "Cannot find the missing module blablabla versioncue.dll". I've searched around a little and found someone who said that 2 updates would fix it. I downloaded the updates but when I started to install it said "Can't find the product to update".
For some extra info, I just reformated comp and I've considered it might be something about missing files or something and if so, can someone add [email protected] and send to me because this is important. This is also because I have a schoolproject where Photoshop will be needed.
I'm also suspicious if I actually have the documents and settings files for CS3 since I only copied the whole files from programs when I reformated it.
Please help!

>since I only copied the whole files from programs when I reformated it.
you need to do a full install from the original discs david. simply copying the files won't do it.

Please help with the understanding of aspect ratio!!!

Hi all,
I'm trying to get my head around the 'aspect ratio' thing if anyone can help.
To give an example, I have imported footage in FCE and in the details of the file it states:
Pixel Aspect: PAL - CCIR 601
Frame size: 720 x 576
What exactly can I earn from the above information?
I gather this is not widescreen but I would like the end film to be. Do I have to 'crop' this? If so, how!?
And how do I make sure the picture looks right on a widescreen TV (so the people don't look squashed, say)?
Many thanks in advanced for the wisdom passed on!
Adam
Oh and should i be thinking about this before I'm about to import from a Mini DV cam? As in settings...
Message was edited by: Vegas Superstar

If you check the anamorphic box on a 4:3 clip you will see some kind of distortion.
In general you choose your setup accordingly with the way your footage has been shot.
In the article you found that iDVD doesn't recognize the "anamorphic" flag that your footage can have in FCE.
Therefore your exported material must be "arranged" so that you tell iDVD you have a 16:9 movie.
When you work entirely in anamorphic 16:9 in FCE (your footage was shot in 16:9 and have the anamorphic flag on), when you export the sequence using export to quick time movie, you'll get a 720x576 PAL movie. Because iDVD will not translate the anamorphic flag, you have to manually change the movie size to 1024x576 for PAL, so that your resultant movie will be keeping the 16:9 aspect ratio.
The native widescreen doesn't use such flag and the video is already at 16:9 aspect ratio.
That's has to deal with pixel that are rectangular and not square as computer uses.
I guess someone else will be more specific and detailed on this.
Regards,
Armando.

Please help with the sql logic

The below is going to be a record set from for a view from the FROM CLAUSE
1. Find component DOCUMENT where the document type = Square Metres (DOC.UOM_STD_ID = 'METR_MTR) If any components are found, retrieve the Document records for these components ONLY.
2. Otherwise, if no components exist with a Document type = Square Metres, look for components with a Document type of Acres (DOC.UOM_STD_ID = 'ACRE'). If found, retrieve the Space Lease records for these components ONLY.
3. Otherwise, if the Document does not have components with a type = Square Metres or Acres, look for components with the type of (DOC.UOM_STD_ID = 'PARK'). Then retrieve the departments associated with these parking components.
For Space Lease records above, retrieve the associated Org ID (SPACE.SPORG).
Return all departments where
the associated Org Type (ORG.ORGCLASS) = 'NON'
or the associated Org Type (ORG.ORGCLASS) = 'GD'
Thank you

maybe something like:
SQL> select emp.empno, emp.ename, emp.deptno
2    from emp,
3         (select case when (select 1 from emp where deptno = 10 and rownum = 1) = 1 then 1
4                      when (select 2 from emp where deptno = 60 and rownum = 1) = 2 then 2
5                      else 3
6                 end case_col
7            from dual) d1
8   where deptno = decode(d1.case_col,1,10,
9                                     2,60,
10                                     3,70);
     EMPNO ENAME          DEPTNO
      7839 KING               10
      7782 CLARK              10
      7934 MILLER             10
SQL> in you code it will be something like:
select ...
   from document t1,
        (select case when (select 1 from document doc where DOC.UOM_STD_ID = 'METR_MTR' and rownum = 1) = 1 then 1
                     when (select 1 from document doc where DOC.UOM_STD_ID = 'ACRE' and rownum = 1) = 2 then 2
                     else 3
                end case_col
           from dual) d1
where t1.uom_std_id = decode(d1.case_col,1,'METR_MTR',
                                         2,'ACRE',
                                         3,'PARK',
                                           null);note: untested

Please help with the Universal Dock issue!!!

Similar Messages

Maybe you are looking for