Please help with the versioncue problem.

I know this is not the right place to post this but please, I need fast help. When I open a project in Photoshop CS3 it says "Cannot find the missing module blablabla versioncue.dll". I've searched around a little and found someone who said that 2 updates would fix it. I downloaded the updates but when I started to install it said "Can't find the product to update".
For some extra info, I just reformated comp and I've considered it might be something about missing files or something and if so, can someone add [email protected] and send to me because this is important. This is also because I have a schoolproject where Photoshop will be needed.
I'm also suspicious if I actually have the documents and settings files for CS3 since I only copied the whole files from programs when I reformated it.
Please help!

>since I only copied the whole files from programs when I reformated it.
you need to do a full install from the original discs david. simply copying the files won't do it.

Similar Messages

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be ab

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.

Adobe - Lightroom : For Macintosh
Hal

Urgent Please help with a Conferencing problem in CUCM 6.1

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
We have a configuration of CUCM 6.1. We have 24 voice ports (FXO) configured in H 323 registered with the call manger. A CUE 3.2 configured for IVR and mail box. Gateway is a Cisco 3845 and the IOS version is 12.4(15) T10
The problem is whenever a conference is configured with an outside number the FXO port is not releasing after the call disconnects. It is not FXO disconnect problem. This happens only when a conference is taking place. There is no problem with any other outside or inside calls.
I am attaching the configuration of Gateway. Please help me with the problem, I am very much thankful for you that.

The Family pack covers upto 5 computers, other Install Disc cover one computer only.

Please help with an RMI problem

Hi,
This is probably a really simple problem which i can't spot, but i have the folloing 'HelloWorld' RMI program:
The Client Program:
import java.rmi.*;
public class HelloClient {
     public static void main(String args[]) {
          if(System.getSecurityManager() == null) {
               System.setSecurityManager(new RMISecurityManager());
          try {
               HelloInterface obj = (HelloInterface)Naming.lookup("/HelloServer");
               String message = obj.sayHello();
               System.out.println(message);
               Thread.sleep(10000);
          } catch (Exception e) {
               System.out.println("HelloClient exception: " + e);
}The Remote Interface:
public interface HelloInterface extends java.rmi.Remote {
     public String sayHello() throws java.rmi.RemoteException;
}The Server Program:
import java.io.*;
import java.rmi.*;
import java.rmi.server.*;
import java.util.Date;
public class HelloServer extends UnicastRemoteObject implements HelloInterface {
     public HelloServer() throws RemoteException {
          super();
     public String sayHello() throws RemoteException {
          return "Hello World, the current system time is " + new Date();
}And finally the class which binds the object to the registery:
import java.rmi.*;
public class RegisterIt {
     public static void main(String args[]) {
          try {
               HelloServer obj = new HelloServer();
               System.out.println("Object instantiated: " + obj);
               Naming.rebind("/HelloServer", obj);
               System.out.println("HelloServer bound to registery");
          } catch (Exception e) {
               System.out.println(e);
}Now, this program works fine on my computer at home(XP!!!!!) but when i try to run it on the computers in college which run NT, it comes up with the following exceptions when i try to run RegisterIt:
Java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
Java.lang.ClassNotFoundException: HelloServer_StubThis is saying that it cannot find the stub which is generated, but i use the folloing .bat file to load up the program:
echo Creating remote object skelton classes....
rmic -d . HelloServer
start rmiregistry -J-Djava.security.policy=test.policy
start java RegisterIt
start java -Djava.security.policy=test.policy HelloClientThe stub is definitely created(it worked at home and i have checked in the directory and there are clearly the files HelloServer_Stub.class and HelloServer_Skel.class). The PATH is set correctly otherwise the registery would not be able to run correctly etc and therefore i am completely stuck as to why it doesn't work.
Please help as it is very important for me.
Many Thanks
Cath

I did not have any problem with Windows 2000 at all but only with Windows XP (and to think XP is a 2000 hybrid!).
I have the same error: a ClassNotFoundException on the stub file.
Any help will be appreciated. Thanks.

Please help with the GUI quiz question!

Hi Folks,
Please help me with the code for the following GUI.
The display window of the application should have two panels at the top level (you could have multiple panels contained within a top-level panel). The first top level panel should have a grid or a border layout and should include apart from various label objects: 1) a textfield to store the info entered, 2) a combobox 3) a combobox or a list box , 4) a radio-button group , 5) a combo box 6) checkboxes for additional accessories, and 7) checkboxes .
The second top-level panel that is placed at the bottom of the window should have a submit button, a clear button and a textarea for output.
Thanks a lot.

Please be a little more explicit about what you're doing, what you expect to happen, and what you actually observe.
Please post a short, concise, executable example of what you're trying to do. This does not have to be the actual code you are using. Write a small example that demonstrates your intent, and only that. Wrap the code in a class and give it a main method that runs it - if we can just copy and paste the code into a text file, compile it and run it without any changes, then we can be sure that we haven't made incorrect assumptions about how you are using it.
Post your code between [code] and [/code] tags. Cut and paste the code, rather than re-typing it (re-typing often introduces subtle errors that make your problem difficult to troubleshoot). Please preview your post when posting code.
Please assume that we only have the core API. We have no idea what SomeCustomClass is, and neither does our collective compiler.
If you have an error message, post the exact, complete error along with a full stack trace, if possible. Make sure you're not swallowing any Exceptions.
Help us help you solve your problem.

Can anyone please help with my G580 problems?

These days my IdeaPad G580 has been showing serious problems: 1) I can't shut down the laptop by clicking the desktop button. Sometimes I may succeed by pushing the hardware button, but very often this won't help either. 2) I can't open the Skype app. Everytime I click on the Skype tile it just displays the blue colour for some seconds and then returns to the start menu. I have to uninstall and then install the app again. Yet the next time I try to open the app, the same problem arises. I can't just keep uninstalling and installing the app. What's more, similar problems appear when I try to open a PDF file with the windows reader application. And of course I cannot uninstall and install the reader app, so what should I do? 3) The windows app market cannot do updates. 4) I have accidentally refreshed my laptop and then I tried to restore the system. The system has been restored to a point which is exactly before I did the refreshing. So almost all my programs have been recovered - except my AUTHENTIC MS Office (which was installed with a CD-ROM)!! That's insane. But I have left my whole MS Office pack in my homeland. What can I do with this?? Please give me your feedback asap. I just bought the laptop not even a month ago. It's silly that so many problems arise.

Have you looked under power options to see if it's configured to shut down when the button is pressed? You can assign different actions in this menu, it may have been accidentally changed somehow. Either that or a faulty power button?

Please help with Nokia N95 problem.

If anyone can help with this I’d be much appreciated, I have a N95 on contract with T-Mobile. When I try to play videos from myspace, or you tube etc… I get a message telling me the following.
“Hello, Either you either have JavaScript turned off or an old version of macromedia's flash player click here to get the latest flash player”.
I then get the option of clicking on a link within the previous sentence statement that directs me to acrobat downloads home page where I get the following message.
“We are unable to locate a web player that matches your platform and browser. Please visit our table of recommended web players”
This is deeply frustrating as in nearly every other way I feel the phone is perfect. If Any one can hep me fix this problem I’d be much appreciated.

daperk,
You should post this to board "Smartphones, Nseries and Eseries Devices".

Please help with column float problem in IE8

Hi there,
Sorry to be so pushy - but I am desperate for help!!
Having serious problems with my site in some PC's showing Internet Explorer 8. My right column floated right is moving down the page underneath the left column..
It shows fine on IE8 on my PC - however on my clients PC (vista with IE8) it is showing up as mentioned above. Is there a fix for this.
Here is my link http://www.dooks.com/pgs/welcome.html
The css is all there! If you need anything please let me know as I need to get this sorted - I have had serious issues with this site that I have never had before with other sites and am starting to think there is a bug in my software. I redid the index page and this one page (linked above) to see what my problems are - so help with query v appreciated.
Many thanks,
Karen

Lawrence_Cramer wrote:
A point to keep in mind is that IE8 is still in Beta.
Not anymore.
http://www.microsoft.com/Presspass/press/2009/mar09/03-18IE8AvailablePR.mspx
"REDMOND, Wash. — March 18, 2009 — Today Microsoft Corp. announced the availability of Windows Internet Explorer 8, the new Web browser that offers..."
Mark A. Boyd
Keep-On-Learnin' :-)

Please help with a display problem.

I plugged in an external projector. It is now disconnected but I can't get the screen to return to normal. Help please.

1. Attempt to put the system to sleep and wake it back up and see if that doesn't correct the issue
(Command + Option+ Eject)
2. If that doesn't work Click on the  in the upper left hand corner of the display and go to system preferences and check your display settings there.
3. If that doesn't work attempt to restart the machine with the projector not connected
I hope this helps!
GL!

Can anyone please help with the 2.3 update in UK?

Can anyone please help? I have an unbranded x10 in the UK. PC companion constantly tells me my phone software is up to date (with android 2.1) so I cannot upgrade to 2.3. I've tried all the tips on the SE support page like deleting the database content and looking for the setting to update the phone next time it's connected which doesn't exist (very informative SE!). I'm not keen on this independent software installation through the rapidshare download, it seems full of glitches looking at the forums. http://www.sonyericsson.com/update/?lc=en&cc=gb&pid=xperiax10 This link clearly tells us the update is available through PC companion, no joy for me though. Any help is welcome.

Have a look at this and check your version number see if its listed
http://forum.xda-developers.com/showthread.php?t=1186045
As for generic roms you have probable read about custom roms
See this thread it is a stock SE rom not a custom rom and will give you just that a stock SE rom if you want
http://talk.sonyericsson.com/thread/19762

Please, help with this strange problem

Hi,
I'm trying to get the serial value of a informix serial column after inserting a record. I'm using the ifxjdbc driver for Informix (v 2.2).
I've written the code below:
Connection conn = null;
PreparedStatement st = null;
try
conn = ds.getConnection();
st = conn.prepareStatement("INSERT INTO Comunicats (vchTitle) "+
"VALUES (?)");
st.setString(1,vchTitle);
if (st.executeUpdate() != 1) throw new EJBException();
/** Now getting the Primary key inserted **/
long sCodCom = ((IfmxStatement)st).getSerial();
st.close();
conn.close();
where I'm getting the connection from a datasource (ds) connected to a Informix pool using that driver (com.informix.jdbc.ifxDriver)
This code inserts the row but fails getting the serial value. The error message is:
"java.lang.ClassCastException: weblogic.jdbc.rmi.SerialPreparedStatement (...) "
Obviously, the cast ((IfmxStatement)st) doesn't work.
If I change how to get the connection, and I use the DriverManager and declare a Statement st variable (instead of a preparedStatement variable):
conn = DriverManager.getConnection(Informix_Url);
Statement st = conn.createStatement();
int nRet = st.executeUpdate("INSERT INTO ...");
Then it works.
But I don't wanna use the DriverManager. I wanna use my pool and datasource to get the connection.
Has anybody tried something similar successfully?
Thanks a lot.
Joan.

Hello jbalaguero,
We are now facing the same problem ie. it works with DriverManager connection but not with Weblogic Connection Pool connection!
Where you able to solve this problem? If yes please tell how!
Thanks.
Hi,
I'm trying to get the serial value of a informix
serial column after inserting a record. I'm using the
ifxjdbc driver for Informix (v 2.2).
I've written the code below:
Connection conn = null;
PreparedStatement st = null;
try
conn = ds.getConnection();
st = conn.prepareStatement("INSERT INTO Comunicats
(vchTitle) "+
"VALUES (?)");
st.setString(1,vchTitle);
if (st.executeUpdate() != 1) throw new
EJBException();
/** Now getting the Primary key inserted **/
long sCodCom = ((IfmxStatement)st).getSerial();
st.close();
conn.close();
where I'm getting the connection from a datasource
(ds) connected to a Informix pool using that driver
(com.informix.jdbc.ifxDriver)
This code inserts the row but fails getting the serial
value. The error message is:
"java.lang.ClassCastException:
weblogic.jdbc.rmi.SerialPreparedStatement (...) "
Obviously, the cast ((IfmxStatement)st) doesn't work.
If I change how to get the connection, and I use the
DriverManager and declare a Statement st variable
(instead of a preparedStatement variable):
conn = DriverManager.getConnection(Informix_Url);
Statement st = conn.createStatement();
int nRet = st.executeUpdate("INSERT INTO ...");
Then it works.
But I don't wanna use the DriverManager. I wanna use
my pool and datasource to get the connection.
Has anybody tried something similar successfully?
Thanks a lot.
Joan.

Please help with card deck problem

the class is supposed to create a shuffled deck of 52 cards
it first is supposed to make an ordered deck of cards and then pull cards out of it and into another deck at random. when a card has been pulled, it is supposed to be taken out of the ordered deck. I say supposed to because for some reason a test of the class gives a strange runtime error:
Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 1 >= 1
at java.util.Vector.elementAt(Vector.java:427)
at Deck.<init>(Deck.java:17)
at testDeck.main(testDeck.java:5)
the following is the code:
import java.util.*;
public class Deck
private Vector orderedDeck = new Vector(52);
private Vector deck = new Vector(52);
public Deck()
    //creates an ordered deck where rank and suit are the rank and suit of a Card variable
    for(int rank=0; rank<=12; rank++)
      for(int suit=0; rank<=3; rank++)
        this.orderedDeck.addElement(new Card(rank,suit));
    //supposed to shuffle the ordered deck into a final deck
    for(int i=0; i<53; i++)
      int randomNum = (int) (Math.random()*(this.orderedDeck.size()+1));
      this.deck.addElement(orderedDeck.elementAt(randomNum));
      this.orderedDeck.removeElementAt(randomNum);
}please help me figure out my problem

     for(int i=0; i<53; i++)This should be:
     for(int i=0; i<52; i++)because you declared your array of size 52.
-Eric

Please help with another card problem

this one is a strange one(if you saw the other one you might understand this better) in any case, i am getting a error and i do not see the reason
here is the code
public Card getCard(int i)
    switch(i)
      case 1: return (Card) card1;
      case 2: return (Card) card2;
      case 3: return (Card) card3;
      case 4: return (Card) card4;
      case 5: return (Card) card5;
}the compiler says that there is no return statement. i don not see the problem as there are five of them and all seem to be accessable.
please tell me if i am not seeing something or have it all wrong.
btw card1,card2,etc. are Card variables so that is not the problem. this method is supposed to return one of five cards according to the int that is passed to it.
please help me!

public Card getCard(int i)
switch(i)
case 1: return (Card) card1;
case 2: return (Card) card2;
case 3: return (Card) card3;
case 4: return (Card) card4;
case 5: return (Card) card5;
}No, no, no. It's really very simple. Imagine this:
Card c = getCard(42);
c.someMethod();What is the value of 'c' after calling getCard()? And what happens when c.someMethod() is called?
You see, the getCard() method does not have a return statement in all cases. A method that returns a value either must be absolutely guaranteed to execute a return statement in all cases, unless an exception in thrown.
So the simplest thing you can do (or an array of cards might be in order here) is just add a default: case that throws an exception.
   public Card getCard(int i)
     switch(i)
       case 1: return (Card) card1;
       case 2: return (Card) card2;
       case 3: return (Card) card3;
       case 4: return (Card) card4;
       case 5: return (Card) card5;
       default: throw new IllegalArgumentException("Invalid card number " + i);
Or, if you expect that in normal operation you'll be passing in values other than 1-5, instead of throwing an exception you could return null. But it sounds to me like in your case, it is a bug if a value other that 1-5 is ever passed in.

Please help with data action problems

Ok, this is driving me nuts, every example I try seems to work half the time...and I can't figure out why.
I'm using JDeveloper 10g, ADF/UIX/Struts.
All I want to do is:
Access the application module for my project in a struts data action.
a) To manipulate view object where clauses based on request parameters.
b) Call application module custom methods.
c) Access request values.
Sometime the following works after I've been playing around:
findForward(DataActionContext ctx)
ViewObject vo = ctx.getBindingContainer().getApplicationModule.findViewObject("myViewObject");
//whatever with the vo from here
MOST of the time, I get 500 Server Errors. They state:
java.lang.NullPointerException
     at mypackage4.DataActi1Action.findForward(DataActi1Action.java:10)
     at oracle.adf.controller.struts.actions.DataAction.findForward(DataAction.java:575)
     at oracle.adf.controller.lifecycle.PageLifecycle.handleLifecycle(PageLifecycle.java:152)
     at oracle.adf.controller.struts.actions.DataAction.handleLifecycle(DataAction.java:233)
     at oracle.adf.controller.struts.actions.DataAction.execute(DataAction.java:163)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:509)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
I believe this has to do with there not being a binding container for the Data Action. However, I can drag custom methods and view object methods (create/delete...) from the data control palette onto it all I want, and I still get the same errors. I thought I read that it generates one, from the long document:
Oracle ADF Data Binding Primer and ADF/Struts Overview
Basically, I read through and am still confused on how I can access the application module reliably. I have some pages that it's work for, but I can't figure out why it doesn't work for others.
Could someone clear this up for me please?

I've tried using getBindingContext, get BindingContainer, and a host of others. I can assign iterators to he UI model, the cpx file, but I still can't seem to figure this out.
I don't see a comparable example in the ones I've downloaded from otn either. Thanks for any help.

Please help with the URL class

Hello,
I am trying to write a Java app that will take a url and download it.
I believe you can do this with the URL class but I don't understand how to. For example, if the http url location points to a picture file, how would I code the app to retrieve this picture and save it to a specified directory?
Also, is there a way that my java app could open another program, let's say Microsoft Internet Explorer?
Please be as specific as possible, thanks!

You'll see below an example to download a file
private static String copyFile (String url, String nomFichier){
     // construction du fichier de sortie
     File outputFile = new File(repertoire + "\\fichiers\\" + nomFichier);
     // si le fichier existe d�j�, il ne sert � rien de le t�l�charger !
if (outputFile.exists())
     return "fichiers/" + nomFichier;
          try {
     HttpURLConnection connect = (HttpURLConnection)new URL(url).openConnection();
boolean connected = false;
while (!connected){
try {
connect.connect();
connected = true;
     catch (java.io.IOException e1) { System.out.print("...Tentative de connection"); }
DataInputStream reader = new DataInputStream(
connect.getInputStream());
     FileOutputStream out = new FileOutputStream(outputFile);
     int length = 1024;
     byte[] buf = new byte[length];
     int offset = 0;
     long offsetCourant = 0;
     int nb=0;
     while ((nb=reader.read(buf,offset,length))!= -1) {
          out.write(buf,0,nb);
     out.close();
     catch (java.net.MalformedURLException e) { System.out.println("pb d'url"); }
     catch (java.io.IOException e1) { System.out.println(e1.getMessage()); }
     return "fichiers/" + nomFichier;
}

Please help with the versioncue problem.

Similar Messages

Maybe you are looking for