Please help with this error: "Your request could not be completed because of a disk error"
So photoshop cs6 was working fine a few weeks ago. After not using it for about 2 weeks, I try opening a RAW file and I get this error every time. JPGs open and work fine. I have extensively searched on the internet for solutions and have tried everything such as: disk checking, deframgenting, playing around with photoshop preferences, deleting temp files, resetting preferences, clearing disk space. I have assigned two hard drives for photoshop, one with 16 GB free and the other with 8 GB free. I am getting very frustrated. Please help!
mistahbo1 wrote:
…I have assigned two hard drives for photoshop, one with 16 GB free and the other with 8 GB free. I am getting very frustrated. Please help!
That's woefully inadequate for scratch file space.
The rule of thumb I follow says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open. I have seen the scratch file exceed 300 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
Additionally, if either one those two drives you mention with "16 GB free and the other with 8 GB free" happened to be your boot drive, you'd be in a heap of trouble because neither one of those drives has nearly enough space to accommodate the swap files of the OS and Photoshop's scratch.
As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS. I have 16 GB of RAM installed:
Similar Messages
-
Post Author: sagimann
CA Forum: Deployment
Hello,
I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
My env is:
Solaris 10 64 bit
Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
Important bouser env:
ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
TNS_ADMIN=$ORACLE_HOME/network/admin
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
I reboot the box, then start BO like so:
cd /opt/reporting/bobje
. setup/env.sh
./mysqlstartup.sh
./startservers
./tomcatstartup
Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
Error:
Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
May 5 15:23:23 testbox1 boe_pagesd[3865]: [ID 253862 user.error] A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
pls advise,
thank you.The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
The explanation, from a comment in the above linked blog post:
"To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
Edited by: abirdman on Feb 3, 2012 9:49 PM -
All of a sudden Safari on my MacBook Air won't let me do anything. I have a Mac OS X Version 10.7.5.
As soon as I open Safari, a message comes up straight away saying 'Appliance Error (configuration error) Your request could not be processed because of a configuration error: account is disabled'.
I also can't check for system updates because of a 'network error' and can't connect to the App Store.
My internet is working fine and safari is working fine on both my iPhone and iPad.
I've never seen this message before and I'm not having much luck in searching for an answer.
This may be a silly question, I don't know, but does anyone have a solution?Back up all data.
From the menu bar, select
▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens. -
Hi there, i purchased an app called Top Movies. But when using it on my iPhone to buy movies, it gives me the error 'Your request could not be completed'. Please help.
Ok.. I see the app now in iTunes.
Best thing to do is email the developer of that app.
You can do that here > http://www.lymobilesoft.com/contact.html
Make sure and tell them exactly what the error says:
it gives me the error 'Your request could not be completed'.
Instead of using a third party app, you can download movies directly from the iTunes store. -
Exchange 2013 SP1 - Error: Your request could not be completed
When trying to log into the ECP I get an:
Error
Your request could not be completed. Please try again later.
When I check the event viewer I get:
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/6837052
Exception: System.ServiceModel.ServiceActivationException: The service '/ecp/DDI/DDIService.svc' cannot be activated due to an exception during compilation. The exception message is: This collection already contains an address with scheme http.
There can be at most one address per scheme in this collection. If your service is being hosted in IIS you can fix the problem by setting 'system.serviceModel/serviceHostingEnvironment/multipleSiteBindingsEnabled' to true or specifying 'system.serviceModel/serviceHostingEnvironment/baseAddressPrefixFilters'.
Parameter name: item. ---> System.ArgumentException: This collection already contains an address with scheme http. There can be at most one address per scheme in this collection. If your service is being hosted in IIS you can fix the problem by
setting 'system.serviceModel/serviceHostingEnvironment/multipleSiteBindingsEnabled' to true or specifying 'system.serviceModel/serviceHostingEnvironment/baseAddressPrefixFilters'.
Parameter name: item
at System.ServiceModel.UriSchemeKeyedCollection.InsertItem(Int32 index, Uri item)
at System.Collections.Generic.SynchronizedCollection`1.Add(T item)
at System.ServiceModel.UriSchemeKeyedCollection..ctor(Uri[] addresses)
at System.ServiceModel.ServiceHost..ctor(Type serviceType, Uri[] baseAddresses)
at Microsoft.Exchange.Management.ControlPanel.ServiceHostFactory.CreateServiceHost(Type serviceType, Uri[] baseAddresses)
at System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(ServiceActivationInfo serviceActivationInfo, EventTraceActivity eventTraceActivity)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
--- End of inner exception stack trace ---
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath, EventTraceActivity eventTraceActivity)
Process Name: w3wp
Process ID: 11124
I am trying to create a Send connector and it gets all the way through but then fails at Select Source Server. There are no source servers listed. Why does it not pick up itself?
As for the error I think this is related to IIS permissions somehow and here is how i have the bindings set:
Default Web Site:
http 80 *
net.msmq localhost
msmq.formatname localhost
net.tcp 808:*
net.pile )
https exssrv.cas.local
443 * (With the SSL cert being the Microsoft Exchange built in one)
Exchange Back End
http exssrv.cas.local
81 192.168.1.5
http exssrv
80 *
net.pipe *
https exssrv.cas.local 444
192.168.1.5 (Bound to Microsoft Exchange ssl)
I am connecting to the site internally from https://exssrv.cas.local/ecp
Thanks for any suggestions.. I think I am almost there on the install! Hoping!Hi ,
Thank you for your question.
This error was caused by the incorrect site binding, I will give a reference of my test Lab. We add two A records in DNS which the FQDN of CAS and Mailbox could resolve IP address.;
Default Web Site:
Exchange Back End:
Then IIS must be restarted.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim -
How do I load Citrix Receiver on my iMac? App Store search came up with zip. Tried from Citrix website, it tried to hook up with App Store snd I got this message: "your request could not be completed". Any ideas?
I see the same dialog and definitely can't locate the app on the App Store.
Try their support page > http://www.citrix.com/support -
hi to support
i want in the appstore with error
::your request could not be completed the item you are request in not currently available in the u.s store::
tanks fo supportYou aren't talking to Support here: this is a user-to-user forum. The message you see usually means that the item has been removed from the Store. If you want to follow this up go to https://expresslane.apple.com ; select 'iTunes' in the first column and then 'iTunes Store' in the second column.
-
"Your request could not be completed" (Clicking on Reviews)
A weird glitch in the App Store has suddenly appeared on my iTunes, in the last couple of days. Although selecting an app is possible, should you want to read the top 3 reviews underneath, it brings up this message:
*+"Your request could not be completed.+*
*+The item you've requested is not currently available in the US store."+*
This message used to be common when games were being altered, and were propagating in the system. It just took a while to come to the US store. But that's not what is happening. One can choose/download the game just fine, but the reviews and/or IDs of the reviewers are not accessible.
Anyone have an idea what's happening?Hi there. I'm having this same problem when trying to read reviews for my own programs, and people are receiving the message when trying to rate my programs that have been in the store and rated previously. As it stands it seems people are unable to rate my applications. This was first noticed a couple of weeks ago.
I did attempt to file a bug report with Apple and have not received a response. Very frustrating. -
Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error". This never happened b4. I tried rebooting and that didn't work. Any help would be appreciated. Thanks.
Hi ,
Thank you for your question.
This error was caused by the incorrect site binding, I will give a reference of my test Lab. We add two A records in DNS which the FQDN of CAS and Mailbox could resolve IP address.;
Default Web Site:
Exchange Back End:
Then IIS must be restarted.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim -
"Your request could not be completed" - Please help?
Trying to acquire a few board games - and this message keeps popping up. Can anyone help please?
I've tried the "Settings => General => .... " but I don't have "Reset" - so this approach unfortunately doesn't help me.... Some solid advice would be appreciated.Panamasteve-
It is hard to know whether to wrongly expect you to be experienced on the iPad, or to explain every detail and insult your intelligence!
Consider that the screen of the iPad is sometimes a window to a larger scene. To see the rest, you "scroll" by wiping your finger on the screen. Think of having a large sheet of paper that you can move with your finger. To scroll down, you move the paper up with your finger.
As far as your statement, "Your request could not be completed", it would help to know more details about what is going on when the message appears.
Fred -
2 errors: "Your iPhone could not be activated because the activation server is temporarily unavailable" and the sim says "searching" while iTunes says there is "No Sim installed" - but of course, there is! Any help please??
Hi Peter,
Thank you for the note - I have seen similar replies on other posting errors and I see how that could make sense. The thing is, my iPhone is not jailbroken - it is from an authorized distributor. However, when I told them about the "no service" problem on the sim, they were unable to assist. Then my phone messaged that an itunes restore was required - so I did that, several times, to the error message now noted on my post. I wonder if there is some other way to over-write this message? Thanks very much. -
no comment
When I open the store in general (from my PC - Windows Vista), I get a message saying "Your request could not be completed. The item you've requested is not currently available in the Canadian Store."
On my iPad, Apps opens, but I can't browse new apps listings, but not their details.
Help? -
Your request could not be completed error on the iPhone
Hi,
Since yesterday, without having changed anything on my iPhone 4S, when trying to go to the FEATURED apps on my iphone, I get the YOUR REQUEST COULD NOT BE COMPLETED error. All other tabs (top 25, search, updates, categories etc...) work. Only the FEATURED tab does not.
Apple genious bar says it's the carrier job to support. Carrier is not avaialble...
Have looked into the forum already and tried all the reset settings, ON, and OFF iPhone, login out and in with Apple ID for App Store etc... no luck.
Any idea please?
Thx
JP.Log out appstore, log in with US acc, open appstore, featured is fine. Back to setting, log out d US acc, login back with your original ID. Work with mine
-
After updating my iTunes to the newest I cannot access iTunes store.
When I pess the button "iTunes Store" I get the message: "Your request could not be completed. The item you've requested is not currently available in the U.S. store." Does anybody know what's going on???I have this issue too. I sent an email and got a link to visit the community and find my answer here. I'm NOT happy with the email I got. I've been able to see my appleid and then click on Music or Movies but I cannot go to the home screen of the Store. This is obviously something they will have to do an update for. We aren't the only ones with this same issue. I've seen more than one question/subject about this same thing.
-
A error message pops up when I try to click top singles "see all" saying "Your request could not be completed the item you've requested is not currently available in the US store" when a few minutes ago it allowed me to do so.
When I open the store in general (from my PC - Windows Vista), I get a message saying "Your request could not be completed. The item you've requested is not currently available in the Canadian Store."
On my iPad, Apps opens, but I can't browse new apps listings, but not their details.
Help?
Maybe you are looking for
-
How do I move my user folder back to my main drive
A while back, I bought a 265 GB SSD. It was too small to accommodate both the system and my user folder so I moved the user folder to another drive. Now that SSD prices have come down, I have purchased a larger SSD. I want to add this drive, install
-
Starting on 2/19/2013 each time my antivirus software scans my computer (Daily), various Firefox browser preferences are being reset. (It appears Firefox may be being reset to default.) My home page is being reset to mozilla etc... I have reset Firef
-
FireFox current tab loses scrolling when a .PDF file is opened in a new tab through a hyperlink
Hey, This is Praveen! I have a problem in FF 4.0 and even in the previous versions wherein when I open an .PDF file (in a new tab) from a link, the current tab loses scrolling until I switch over to the newly opened tab. Kindly address this issue. Th
-
Buttons within Complex Buttons
Hi all - i'm trying to create a navigation system fairly indentical to this one: http://www.thefieryfurnaces.com/ I am using a complex button with actionscript, however I can't get any of the navigation buttons to work on top of this. I'd like them t
-
List of CP with the Archiving flag
Please advise me the tables with the relationsips between them to get the list of the CPs whose status is set for archiving. Thanks for your help in advance and points will be rewarded. Regards Kiran