Please help with this script, AS3 to AS2(preloader)

Hi. Ive made a flash banner for my client. It have two scenes, preloader (with percentage and animation (in 100 frame)) and the main scene. Preloader uses AS3. I need this convert to AS2. How to do this? The code:
import flash.events.ProgressEvent;
function update(e:ProgressEvent):void
var percent:Number = Math.floor( (e.bytesLoaded*100)/e.bytesTotal );
if(preloaderMC is MovieClip){
preloaderMC.gotoAndStop(percent);
preload_txt.text = String(percent) + "%";
if(percent == 100){
play();
loaderInfo.addEventListener(ProgressEvent.PROGRESS, update);
// Extra test for IE
var percent:Number = Math.floor( (this.loaderInfo.bytesLoaded*100)/this.loaderInfo.bytesTotal );
if(percent == 100){
nextFrame();
stop();
The full FLA: http://www.agroinvent.eu/briklis.fla, if someone can repair(make) it, pls send me the corrected fla file.
BIG THANKS. BEST REGARDS. Zolee

use:
var tl:MovieClip=this;
function update():Void
var percent:Number = Math.floor( (tl.getBytesLoaded()*100)/tl.getBytesTotal() );
preloaderMC.gotoAndStop(percent);
preload_txt.text = String(percent) + "%";
if(percent == 100){
clearInterval(preloadI);
tl.play();
clearInterval(preloadI);
preloadI = setInterval(update,100);
stop();

Similar Messages

  • Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.

    Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.

    Hello Priyanks,
    I found an article with steps you can take to troubleshoot issues with an iPhone not connecting to your car stereo:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

    My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

    Following the fix here worked for me:
    https://discussions.apple.com/message/15680566#15680566
    except my plist file was in ~/Library instead of /Library.
    -Scott

  • I need help with this script please ASAP

    So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
    The script (Sorry if it's a bit long):
    #------------Startup-------------
    display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
    set Lolz to (button returned of the result)
    if Lolz is "Cyaaaa" then
    killapp()
    else if Lolz is "Take the Quiz" then
              do shell script "say -v samantha Ok starting in 3…2…1…GO!"
    #------------Question 1-----------
              display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
              set A1 to (button returned of the result)
              if A1 is "Apprentices" then
                        do shell script "say -v samantha Correct Answer"
              else
                        do shell script "say -v samantha Wrong Answer"
      #----------Question 2--------
                        display dialog "Most children were taught
    to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
                        set A2 to (button returned of the result)
                        if A2 is "Bible" then
                                  do shell script "say -v samantha Correct Answer"
                        else
                                  do shell script "say -v samantha Wrong Answer"
      #------------Question 3---------
                                  display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
                                  set A3 to (button returned of the result)
                                  if A3 is "Great Awakening" then
                                            do shell script "say -v samantha Correct Answer"
                                  else
                                            do shell script "say -v samantha Wrong Answer"
      #-----------Question 4--------
                                            display dialog "_______ was
    a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
                                            set A4 to (button returned of the result)
                                            if A4 is "Ben Franklin" then
                                                      do shell script "say -v samantha Correct Answer"
                                            else
                                                      do shell script "say -v samantha Wrong Answer"
      #----------Question 5-------
                                                      display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
                                                      set A5 to (button returned of the result)
                                                      if A5 is "Land" then
                                                                do shell script "say -v samantha Correct Answer"
                                                      else
                                                                do shell script "say -v samantha Wrong Answer"
      #---------Question 6--------
                                                                display dialog "The first step toward guaranteeing these rights came in 1215. That
    year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
                                                                set A6 to (button returned of the result)
                                                                if A6 is "Magna Carta" then
                                                                          do shell script "say -v samantha Correct Answer"
                                                                else
                                                                          do shell script "say -v samantha Wrong Answer"
      #----------Question 7--------
                                                                          display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
                                                                          set A7 to (button returned of the result)
                                                                          if A7 is "Parliament" then
                                                                                    do shell script "say -v samantha Correct Answer"
                                                                          else
                                                                                    do shell script "say -v samantha Wrong Answer"
      #--------Question 8-----
                                                                                    display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
                                                                                    set A8 to (button returned of the result)
                                                                                    if A8 is "King James II" then
                                                                                              do shell script "say -v samantha Correct Answer"
                                                                                    else
                                                                                              do shell script "say -v samantha Wrong Answer"
      #--------Question 9------
                                                                                              display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
                                                                                              set A9 to (button returned of the result)
                                                                                              if A9 is "William/Mary/Glorius Revolution" then
                                                                                                        do shell script "say -v samantha Correct Answer"
                                                                                              else
                                                                                                        do shell script "say -v samantha Wrong Answer"
      #---------Question 10-----
                                                                                                        display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
                                                                                                        set A10 to (button returned of the result)
                                                                                                        if A10 is "Rights" then
                                                                                                                  do shell script "say -v samantha Correct Answer"
                                                                                                        else
                                                                                                                  do shell script "say -v samantha Wrong Answer"
      #---------Question 11------
                                                                                                                  display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
                                                                                                                  set A11 to (button returned of the result)
                                                                                                                  if A11 is "Ohio" then
                                                                                                                            do shell script "say -v samantha Correct Answer"
                                                                                                                  else
                                                                                                                            do shell script "say -v samantha Wrong Answer"
      #------Question 12---------
                                                                                                                            display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
                                                                                                                            set A12 to (button returned of the result)
                                                                                                                            if A12 is "George Washington" then
                                                                                                                                      do shell script "say -v samantha Correct Answer"
                                                                                                                            else
                                                                                                                                      do shell script "say -v samantha Wrong Answer"
      #---------Question 13-------
                                                                                                                                      display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
                                                                                                                                      set A13 to (button returned of the result)
                                                                                                                                      if A13 is "Ben Franklin" then
                                                                                                                                                do shell script "say -v samantha Correct Answer"
                                                                                                                                      else
                                                                                                                                                do shell script "say -v samantha Wrong Answer"
      #--------Question 14------
                                                                                                                                                display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
                                                                                                                                                set A14 to (button returned of the result)
                                                                                                                                                if A14 is "" then
                                                                                                                                                          do shell script "say -v samantha Correct Answer"
                                                                                                                                                else
                                                                                                                                                          do shell script "say -v samantha Wrong Answer"
      #-------Question 15-------
                                                                                                                                                          display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
                                                                                                                                                          set A15 to (button returned of the result)
                                                                                                                                                          if A15 is "Command an attack against French" then
                                                                                                                                                                    do shell script "say -v samantha Correct Answer"
                                                                                                                                                          else
                                                                                                                                                                    do shell script "say -v samantha Wrong Answer"
      #------TheLolQuestion-----
                                                                                                                                                                    display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
                                                                                                                                                                    set LOOL to (button returned of the result)
                                                                                                                                                                    if LOOL is "Mr.White" then
                                                                                                                                                                              do shell script "say -v samantha Congratulations…you…have…common…sense"
                                                                                                                                                                    else
                                                                                                                                                                              do shell script "say -v alex Do…you…have…eyes?"
                                                                                                                                                                              #------END------
                                                                                                                                                                              display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
                                                                                                                                                                              set endmenu to (button returned of the result)
                                                                                                                                                                              if endmenu is "I did!" then
                                                                                                                                                                                        do shell script "say -v samantha Your awesome"
                                                                                                                                                                              else
                                                                                                                                                                                        do shell script "say -v alex Go outside and run a lap"
                                                                                                                                                                              end if
                                                                                                                                                                    end if
                                                                                                                                                          end if
                                                                                                                                                end if
                                                                                                                                      end if
                                                                                                                            end if
                                                                                                                  end if
                                                                                                        end if
                                                                                              end if
                                                                                    end if
                                                                          end if
                                                                end if
                                                      end if
                                            end if
                                  end if
                        end if
              end if
    end if

    Use code such as:
    display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
    set A1 to (button returned of the result)
    if A1 is "Apprentices" then
    do shell script "say -v samantha Correct Answer"
    else
    do shell script "say -v samantha Wrong Answer"
    return
    end if
    #----------Question 2--------
    display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
    set A2 to (button returned of the result)
    if A2 is "Bible" then
    do shell script "say -v samantha Correct Answer"
    else
    do shell script "say -v samantha Wrong Answer"
    return
    end if
    (90444)

  • Please help with this issue "To Run a SSIS Package outside of Server Data Tools You must install Drived Column of Integration sercvies of higher" From C# app

     i have searched all over the google and here on MSDN(I have read all the threads related to my problem ) , i am new to SISS and doing my clg project ,
    I have this package which loads data from  dim tables to a fact table , my Package runs without any problem in BIDS (2012)
    I have installed SQl Server integration services on SQL and service is also running in services.msc,
    the problem comes when i execute my package using my C# application i am using MSDN Method to execute a SSIS package programmatically given here.
    "http://msdn.microsoft.com/en-us/library/ms136090.aspx"
    For loading my FactTable i have used a Derived columns  and some lookups , 
    Now if i don't use derived columns and looks ups and just use source and destination component then my package runs fine from my C# application but if i use derived columns or looks ups etc it gives the following error
    "Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/SSIS.Pipeline: To Run a SSIS package outside of SQL Server Data Tools you must Install Derived Column of Integration services of higher"
    I am searching and trying to resolve this issue from previous 2 days but without any luck please help or guide me what is solution to this problem ,,i will be very thankful
    I have also found that integration services that are running on my system have version  10.0
    but the BIDS have version Version 11.0.3402.0
    IS this causing problem ?  if yes then what i have to do  ?

    Hi BlaxButt,
    The package is developed in SSDT installed by SQL Server 2012, so it is a SSIS 2012 package. However, the Integration Services you have installed is SQL Server 2008 R2 version. To run the package outside SSDT, you need SSIS 2012 installed. The reason why
    the package runs fine with only Source and Destination components is that such a simple package can be executed by the DTExec utility installed by SQL Server 2012 Data base Engine or Client Tools (SQL Server Import and Export Wizard). To run a package that
    uses other tasks/components outside SSDT/BIDS, the SSIS runtime is also required except the DTExec utility. To obtain the SSIS 2012 runtime, we have to install SSIS 2012 on the server where the package runs.
    Reference:
    http://stackoverflow.com/questions/19989099/getting-error-running-ssis-package-on-non-ssis-server
    Regards,
    Mike Yin
    TechNet Community Support

  • I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect to my MacBook it erases everything on had on there. Can someone please help with this problem?

    I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.

    dwgar1322 wrote:
    I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
    Yes, you have WD software installed  REMOVE IT !! 
    WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
    (also dont use WD drives anymore)
    Read all about it here:
    https://discussions.apple.com/thread/5475136?start=255&tstart=0
    See their website on removing the destructive WD software here:
    http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
    Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
    http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/

  • Please help with this error: "Your request could not be completed because of a disk error"

    So photoshop cs6 was working fine a few weeks ago. After not using it for about 2 weeks, I try opening a RAW file and I get this error every time. JPGs open and work fine. I have extensively searched on the internet for solutions and have tried everything such as: disk checking, deframgenting, playing around with photoshop preferences, deleting temp files, resetting preferences, clearing disk space. I have assigned two hard drives for photoshop, one with 16 GB free and the other with 8 GB free. I am getting very frustrated. Please help!

    mistahbo1 wrote:
    …I have assigned two hard drives for photoshop, one with 16 GB free and the other with 8 GB free. I am getting very frustrated. Please help!
    That's woefully inadequate for scratch file space.
    The rule of thumb I follow says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open.  I have seen the scratch file exceed 300 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
    Additionally, if either one those two drives you mention with "16 GB free and the other with 8 GB free" happened to be your boot drive, you'd be in a heap of trouble because neither one of those drives has nearly enough space to accommodate the swap files of the OS and Photoshop's scratch.
    As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS.  I have 16 GB of RAM installed:

  • Please help with this slow internet

    Can someone please help me with this slow internet. I have been looking on this forum for a while and have tried about everything I can do. I bought a new macbook, a new airport extreme base station, and have high speed internet. I can connect with a wire and it works great but wirelessly is slower than dial up. I am also not very good with computers so I am not sure how to do a lot of the things that many people say to do. I have comcast internet. If you need anymore information I will do my best to give it. Please help me fix this, remember it is the holiday season be a giver.
    Thanks in advance for any help you can give.
    Aaron

    I believe there are several reasons for Leopard's networking issues.
    I've heard it's worth a try to *turn off IPv6 in the OS network settings and your router* (if such an option exists in your router). IPv6 is the new addressing protocol which many consider to be overkill, seeing as it allows for approximately as many addresses as there are square centimeters of surface area on planet Earth (according to Wikipedia). It's also known to cause issues with Vista, which leads me to believe that the protocol is fundamentally flawed in some way.
    Just a note, turning off IPv6 in the OS is easy, simply go to *System Preferences* > Network > select the *network type* you're using (i.e. Wi-fi, ethernet, FireWire). Then click the Advanced... button, go to the TCP/IP tab, and say *Configure IPv6: Off*.
    Upgrading your router's firmware is worth a try, although such updates should only be performed through the ethernet connection, not over Wi-Fi (otherwise you could risk turning your router into a giant paperweight). You should also take note of your router settings prior to the firmware upgrade, because they will probably be reset with the upgrade.
    Check your *Activity Monitor* in Applications under Utilities. Right-click (or control-click) on the *Activity Monitor* icon and tell the *Dock Icon* to *Show CPU Usage*. Keep an eye on the CPU usage in the dock and if it goes higher than expected, click on the icon and tell the window to *Show Active Processes*, and/or organize the processes by order of CPU usage.
    Leopard doesn't have "nice" processes anymore and I find that some processes that like to use the network prevent other processes from using the network simultaneously. I think a lot of the network issues people are having are due to *Quick Look*, mdworker, and mds. These processes seem to like to go out on the network and make notes about every server available, however there doesn't seem to be any way to make these processes "nice" or kill them permanently without losing valuable system functions. It's interesting, at least, to see the probable cause of some of these networking problems, even if we can't fix them.
    By now, I'm sure I sound like I'm babbling, but I hope at least some of this helps somebody out there.

  • Please help with this part of error...

    Hi all,
    Please help me with this error. What i was trying to do is that when Server send a message to client, it print out on the screen what is sent to Client. For instance, if the Message is called FirstMessage sent to Client, the message FirstClient will display from server console with a specific message such as "First Message from server to client: first Message") and so on. I tried to implement the below code but when compiled it i got error message as follows :
    C:\Java\bin>javac QuoteServer.java
    QuoteServer.java:60: <identifier> expected
    out.close();
    ^
    QuoteServer.java:61: <identifier> expected
    in.close();
    ^
    QuoteServer.java:62: <identifier> expected
    clientSocket.close();
    ^
    QuoteServer.java:63: <identifier> expected
    myserverSocket.close();
    ^
    4 errors
    Her is the Server side socket...
    import java.net.*;
    import java.io.*;
    import java.util.*;
    class QuoteServer
    public static void main(String[] args) throws IOException
    ServerSocket myserverSocket = null;
    try
    myserverSocket = new ServerSocket(4998);
    } catch (IOException e)
                        System.err.println("Could not listen on port: 4998.");
                        System.exit(1);
    Socket clientSocket = null;
    try
    clientSocket = myserverSocket.accept();
    } catch (IOException e)
                        System.err.println("Accept failed.");
                        System.exit(1);
                   PrintWriter out = new PrintWriter(clientSocket.getOutputStream(), true);
                   BufferedReader in = new BufferedReader(
                   new InputStreamReader(
                   clientSocket.getInputStream()));
                   String inputLine, outputLine;
                   QuoteProtocol QP = new QuoteProtocol();
                   outputLine = QP.processInput(null);
                   Date current = new Date();
                   out.println(outputLine);
                   String ToClient;
                   while ((inputLine = in.readLine()) != null )
                             outputLine = QP.processInput(inputLine);
                             out.println(outputLine);
                             System.out.println(inputLine);
                             System.out.println(current.toString());
                             /* additional..if doesn't work delete this code*/
                             while ((ToClient = in.readLine()) != null)
                                  System.out.println("Server: " + ToClient);
                                  if (ToClient.equals("Bye."))
                                  break;
                   /* delete up to break*/
                        if (outputLine.equals("Bye."))
                             break;
    out.close();
    in.close();
    clientSocket.close();
    myserverSocket.close();
    Could someone with the expertise advise me what shall i do?
    Thank you very much.
    Audrea.

    Thanks for the quick reply...
    Here is the code with correct open/close braces...
    import java.net.*;
    import java.io.*;
    import java.util.*;
    class QuoteServer
    public static void main(String[] args) throws IOException
    ServerSocket myserverSocket = null;
    try
    myserverSocket = new ServerSocket(4998);
    } catch (IOException e)
                        System.err.println("Could not listen on port: 4998.");
                        System.exit(1);
    Socket clientSocket = null;
    try
    clientSocket = myserverSocket.accept();
    } catch (IOException e)
                        System.err.println("Accept failed.");
                        System.exit(1);
                   PrintWriter out = new PrintWriter(clientSocket.getOutputStream(), true);
                   BufferedReader in = new BufferedReader(
                   new InputStreamReader(
                   clientSocket.getInputStream()));
                   String inputLine, outputLine;
                   QuoteProtocol QP = new QuoteProtocol();
                   outputLine = QP.processInput(null);
                   Date current = new Date();
                   out.println(outputLine);
                   String ToClient;
                   while ((inputLine = in.readLine()) != null )
                             outputLine = QP.processInput(inputLine);
                             out.println(outputLine);
                             System.out.println(inputLine);
                             System.out.println(current.toString());
                             /* additional..if doesn't work delete this code*/
                             while ((ToClient = in.readLine()) != null)
                                  System.out.println("Server: " + ToClient);
                                  if (ToClient.equals("Bye."))
                                  break;
                   /* delete up to break*/
                        if (outputLine.equals("Bye."))
                             break;
    out.close();
    in.close();
    clientSocket.close();
    myserverSocket.close();
    Line 60 starting from out.close(); onwards.
    Please help..
    Thanks a lot.
    Audrea.

  • Please help with this com/apple/mrj/macos/carbon/CarbonLock

    Can anyone help me with this error
    java.lang.NoClassDefFoundError: com/apple/mrj/macos/carbon/CarbonLock
    we have written a app that takes a digital photo with a web cam. Now get this on my macs
    Please help any help Please
    Craig

    Thank I have seen that but thanks
    I was hoping there is a way around it ??
    I can not believe that Apple the makers of QuickTime don['t support Java 1.4.1
    Craig

  • Please help with this bapi

    Hi Experts!
    I am trying to use 'BAPI_OUTB_DELIVERY_CONFIRM_DEC' for posting goods issue but could not succeed. I am getting the message 615 (Delivery item is not or only partially packed) when I test the same in SE37. However the same delivery, if I go to VL02n and issue post goods issue, it is succeeding. I think I am doing some mistake with the parameters to be passed to bapi. Please help me find the error as I am unable to find. I am stuck with this for pretty long time. Points assured for helpful answers.
    Thanks for your time.
    Krishen
    DATA: itab_headerdata TYPE STANDARD TABLE OF bapiobdlvhdrcon WITH HEADER LINE.
    DATA: itab_headercontrol TYPE STANDARD TABLE OF bapiobdlvhdrctrlcon WITH HEADER LINE.
    DATA: itab_itemdata TYPE STANDARD TABLE OF bapiobdlvitemcon WITH HEADER LINE.
    DATA: itab_itemcontrol TYPE STANDARD TABLE OF bapiobdlvitemctrlcon WITH HEADER LINE .
    DATA: itab_bapiret2 TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
    DATA: itab1_bapiret2 TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
    DATA: itab3_bapiret2 TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
    DATA: deliv_numb TYPE bapiobdlvhdrcon-deliv_numb.
    Vbeln and posnr are coming from itab.
      SELECT SINGLE * FROM likp
        WHERE vbeln = itab-vbeln.
      SELECT SINGLE * FROM lips
      WHERE vbeln = itab-posnr.
      itab_headerdata-deliv_numb = likp-vbeln.
      itab_headercontrol-deliv_numb = likp-vbeln.
      itab_headercontrol-post_gi_flg = 'X'.
      CLEAR deliv_numb.
      deliv_numb = likp-vbeln.
      itab_itemdata-deliv_numb = likp-vbeln.
      itab_itemdata-deliv_item = lips-posnr.
      itab_itemdata-dlv_qty = lips-lfimg.
      itab_itemdata-sales_unit = lips-meins.
      itab_itemdata-fact_unit_nom = lips-umvkz.
      itab_itemdata-fact_unit_denom = lips-umvkn.
      itab_itemcontrol-deliv_numb = likp-vbeln.
      itab_itemcontrol-deliv_item = lips-posnr.
      itab_itemcontrol-chg_delqty = 'X'.
      CALL FUNCTION 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
        EXPORTING
          header_data                = itab_headerdata
          header_control             = itab_headercontrol
          delivery                   = deliv_numb
      TECHN_CONTROL              =
        TABLES
      HEADER_PARTNER             =
      HEADER_PARTNER_ADDR        =
      HEADER_DEADLINES           =
       item_data                  = itab_itemdata
       item_control               = itab_itemcontrol
      ITEM_SERIAL_NO             =
      SUPPLIER_CONS_DATA         =
      HANDLING_UNIT_HEADER       =
      HANDLING_UNIT_ITEM         =
      HANDLING_UNIT_SERNO        =
      EXTENSION1                 =
      EXTENSION2                 =
          return                = itab_bapiret2.
      TOKENREFERENCE             =
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait   = 'X'
        IMPORTING
          return = itab1_bapiret2.

    Hi Krishen
       Have done some modifications to your code. Highlighted below are the same. Please check if the same works for you.
    DATA: itab_headerdata TYPE STANDARD TABLE OF bapiobdlvhdrcon WITH HEADER LINE.
    DATA: itab_headercontrol TYPE STANDARD TABLE OF bapiobdlvhdrctrlcon WITH HEADER LINE.
    DATA: itab_itemdata TYPE STANDARD TABLE OF bapiobdlvitemcon WITH HEADER LINE.
    DATA: itab_itemcontrol TYPE STANDARD TABLE OF bapiobdlvitemctrlcon WITH HEADER LINE .
    DATA: itab_bapiret2 TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
    DATA: itab1_bapiret2 TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
    DATA: itab3_bapiret2 TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
    DATA: deliv_numb TYPE bapiobdlvhdrcon-deliv_numb.
    Vbeln and posnr are coming from itab.
    SELECT SINGLE * FROM likp
    WHERE vbeln = itab-vbeln.
    SELECT SINGLE * FROM lips
    WHERE vbeln = itab-posnr.
    <b>select single kostk from vbuk into vbuk-kostk
           where vbeln = itab-vbeln
           and   kostk = 'C'.
    if sy-subrc ne 0.
    message "Picking is not fully done
    else.</b>
    itab_headerdata-deliv_numb = likp-vbeln.
    itab_headercontrol-deliv_numb = likp-vbeln.
    itab_headercontrol-post_gi_flg = 'X'.
    CLEAR deliv_numb.
    deliv_numb = likp-vbeln.
    <b>*itab_itemdata-deliv_numb = likp-vbeln.
    *itab_itemdata-deliv_item = lips-posnr.
    *itab_itemdata-dlv_qty = lips-lfimg.
    *itab_itemdata-sales_unit = lips-meins.
    *itab_itemdata-fact_unit_nom = lips-umvkz.
    *itab_itemdata-fact_unit_denom = lips-umvkn.
    *itab_itemcontrol-deliv_numb = likp-vbeln.
    *itab_itemcontrol-deliv_item = lips-posnr.
    *itab_itemcontrol-chg_delqty = 'X'.</b>
    CALL FUNCTION 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
    EXPORTING
    header_data = itab_headerdata
    header_control = itab_headercontrol
    delivery = deliv_numb
    TECHN_CONTROL =
    TABLES
    HEADER_PARTNER =
    HEADER_PARTNER_ADDR =
    HEADER_DEADLINES =
    item_data = itab_itemdata
    item_control = itab_itemcontrol
    ITEM_SERIAL_NO =
    SUPPLIER_CONS_DATA =
    HANDLING_UNIT_HEADER =
    HANDLING_UNIT_ITEM =
    HANDLING_UNIT_SERNO =
    EXTENSION1 =
    EXTENSION2 =
    return = itab_bapiret2.
    TOKENREFERENCE =
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
    wait = 'X'
    IMPORTING
    return = itab1_bapiret2.
    <b>endif.</b>
    Kind Regards
    Eswar

  • Help with this script

    When I run this script from within the applescript edito I get the popup dialog. For some reason it is not finding the file. I know it exists.
    try
      tell application "Finder"
        if exists file "SavedIP.log" in "/Library/Logs" then
          set savedIP to do shell script "cat /Library/Logs/SavedIP.log"
        end if
      end tell
    on error errmsg
      display dialog errmsg
    end try
    Thank you for any help.

    While it's often a good idea to check for files before reading them, it can cause confusion especially when trying to mix Mac-style (colon-delimited) and UNIX-style (slash-delimited) paths, as you've seen.
    An alternative is to not bother checking - just read the file and catch any errors that occur (such as the file not existing):
    try
      set SavedIP to do shell script "cat /Library/Logs/SavedIP.log"
    on error
      -- file does not exist
    end try
    In this case the assumption is that the file does exist, but if it doesn't (or if some other error occurs) then you can trap that case in the 'on error' block, and deal with it accordingly.

  • Please help with this method

    im creating a little animation of pacman, just an animation of it moving buy its self. im using the java elements package so this is all being shown in a drawing window.
    ive made it move fine and go round the window abit eating dots but the code is a mess, and i know i could change some of the main part into a few simple methods and have tried but it seems to stop moving when i try
    below is part of the code, the first three blocks are when its moving sideways with its mouth in three different states, and the bottom three blocks are it moving down with its mouth in three states again.
    Arc pacarc = new Arc();
    while (startmv++<stopmv)
    pac1x += 4;
    d.setForeground(Color.yellow);
    pacarc = new Arc(pac1x,pac1y,pacsize1,pacsize2,pacmouth1,pacangle1);
    d.fill(pacarc);
    d.setForeground(Color.black);
    waitNSeconds(1);
    d.fill(pacarc);
    pac1x += 4;
    d.setForeground(Color.yellow);
    pacarc = new Arc(pac1x,pac1y,pacsize1,pacsize2,pacmouth2,pacangle2);
    d.fill(pacarc);
    d.setForeground(Color.black);
    waitNSeconds(1);
    d.fill(pacarc);
    pac1x += 4;
    d.setForeground(Color.yellow);
    pacarc = new Arc(pac1x,pac1y,pacsize1,pacsize2,pacmouth3,pacangle3);
    d.fill(pacarc);
    d.setForeground(Color.black);
    waitNSeconds(1);
    d.fill(pacarc);
    while (startdwn++<stopdwn)
    pac1y +=4;
    d.setForeground(Color.yellow);
    pacarc = new Arc(pac1x,pac1y,50,50,pacdwn1,pacdwnang1);
    d.fill(pacarc);
    d.setForeground(Color.black);
    waitNSeconds(1);
    d.fill(pacarc);
    pac1y +=4;
    d.setForeground(Color.yellow);
    pacarc = new Arc(pac1x,pac1y,50,50,pacdwn2,pacdwnang2);
    d.fill(pacarc);
    d.setForeground(Color.black);
    waitNSeconds(1);
    d.fill(pacarc);
    pac1y +=4;
    d.setForeground(Color.yellow);
    pacarc = new Arc(pac1x,pac1y,50,50,pacdwn3,pacdwnang3);
    d.fill(pacarc);
    d.setForeground(Color.black);
    waitNSeconds(1);
    d.fill(pacarc);
    so for the first part i tried putting this into a method and running the program but where i had used the method the pacman shape just stayed still. any help please guys?
    this is the code for the method i tried (this is just for thefirst state of the pacmans mouth while moving sideways)
    public static void pacmve(int pactestx, int pactesty, int pacsizetest1, int pacsizetest2, int pacmouthtest, int pacangletest)
    pactestx += 4;
    Arc pacarc = new Arc();
    d.setForeground(Color.yellow);
    pacarc = new Arc(pactestx,pactesty,pacsizetest1,pacsizetest2,pacmouthtest,pacangletest);
    d.fill(pacarc);
    d.setForeground(Color.black);
    waitNSeconds(1);
    d.fill(pacarc);
    this is the loop i where i was trying to use the method
    while (startmv++<stopmv)
    pacmve(20,20,50,50,45,270);
    Edited by: jeffsimmo85 on Nov 22, 2007 1:18 AM

    When you post a code on a public forum, the code must be:
    1)Properly formatted using code tags.
    2)Generally compilable and runnable for us casual forum viewers.
    3)Reproducible of your problems when we run it.

  • Please help with this code....

    I create a button with ActionListner and a writeCd method. Now I want everytime i push the button, it will read the writeCd method. I dont' know how to make it work. Please help me out as soon as possible. Thanks a lot. Below are the codes of the button and writeCd method.
    class findCD implements ActionListener
    public void actionPerformed(ActionEvent event)
    //what do I need to put here to make the button work
    //with method writeCD() below
    public void writeCd() throws Exception
    String outputFileName;
    PrintWriter outputFile;
    outputFileName = "D:\\cdoutput.txt";
    outputFile = new PrintWriter(new FileWriter(outputFileName,true));
    int loopTest;
    do
    String numStr = JOptionPane.showInputDialog("Please enter Index number");
    int number = Integer.parseInt(numStr);
    cC.setIndexNumber(number);
    numStr = JOptionPane.showInputDialog("Please enter cd name");
    number = Integer.parseInt(numStr);
    cC.setCdName(number);
    String message = cC.toString() +
    "\nYour input is: ";
    JOptionPane.showMessageDialog(null, message);
    outputFile.println(numStr + "");
    loopTest = JOptionPane.showConfirmDialog(null,"Do another?","",0,1);
    while (loopTest == 0);
    outputFile.close();

    class findCD implements ActionListener
           public void actionPerformed(ActionEvent event)
                try
                     writeCd();
                } catch(Exception e){
                                        e.printStackTrace();
      public void writeCd() throws Exception
          String outputFileName;
          PrintWriter outputFile;
          outputFileName = "D:\\cdoutput.txt";
    outputFile = new PrintWriter(new
    (new FileWriter(outputFileName,true));
             int loopTest;
             do
    String numStr =
    umStr = JOptionPane.showInputDialog("Please enter
    Index number");
             int number = Integer.parseInt(numStr);
             cC.setIndexNumber(number);
    numStr = JOptionPane.showInputDialog("Please
    "Please enter cd name");
             number = Integer.parseInt(numStr);
             cC.setCdName(number);
             String message = cC.toString() +
                              "\nYour input is: ";
             JOptionPane.showMessageDialog(null, message);
            outputFile.println(numStr + "");
    loopTest =
    pTest = JOptionPane.showConfirmDialog(null,"Do
    another?","",0,1);
             while (loopTest == 0);
           outputFile.close();
        }That should work. This also assumes that the method writeCd is in the class findCD.

  • Please help with this method, cant get it to work correctly.

    any suggestions AT ALL please, im really stuck with this.
    im creating a little animation of pacman, just an animation of it moving buy its self. im using the java elements package so this is all being shown in a drawing window.
    ive made it move fine and go round the window abit eating dots but the code is a mess, and i know i could change some of the main part into a few simple methods and have tried but it seems to stop moving when i try
    import element.*;
    import java.awt.Color;
    static DrawingWindow d = new DrawingWindow(500,500);  
       public static void wait1second()
        //  pause for one tenth of a second second
            long now = System.currentTimeMillis();
            long then = now + 100; // 100 milliseconds
            while (System.currentTimeMillis() < then)
        public static void waitNSeconds(int number)
            int i;
            for (i = 0; i < number; i++) //allows you to determine how long to pause for
                wait1second();
    public static void main(String[] args) {
        //  declaring the variables
        int pacsize1 = 50, pacsize2 = 50;
        int pac1x = 20, pac1y = 20;
        int pacmouth1 = 45, pacangle1 = 270;
        int pacmouth2 = 25, pacangle2 = 320;
        int pacmouth3 = 6, pacangle3 = 348;
        int startmv = 0, stopmv = 33;
        d.setForeground(Color.black);
        Rect bkrnd = new Rect(0,0,500,500);     
        d.fill(bkrnd);
       // while loop used to make the pacman shape move right across the screen with its mouth in three different states
    Arc pacarc = new Arc();
         while (startmv++<stopmv)
            pac1x += 4;
            d.setForeground(Color.yellow);
            pacarc = new Arc(pac1x,pac1y,pacsize1,pacsize2,pacmouth1,pacangle1);
            d.fill(pacarc);
            d.setForeground(Color.black);
            waitNSeconds(1);
            d.fill(pacarc);
            pac1x += 4;
            d.setForeground(Color.yellow);
            pacarc = new Arc(pac1x,pac1y,pacsize1,pacsize2,pacmouth2,pacangle2);
            d.fill(pacarc);
            d.setForeground(Color.black);
            waitNSeconds(1);
            d.fill(pacarc);
            pac1x += 4;
            d.setForeground(Color.yellow);
            pacarc = new Arc(pac1x,pac1y,pacsize1,pacsize2,pacmouth3,pacangle3);
            d.fill(pacarc);
            d.setForeground(Color.black);
            waitNSeconds(1);
            d.fill(pacarc);
    }so i tried making a method to make all the stuf in the while loop alot simpler but it just keeps making the pacman not move at all and im not sure why. heres the code i tried for the method:
    public static void pacmve(int pactestx, int pactesty, int pacsizetest1, int pacsizetest2, int pacmouthtest, int pacangletest)
            pactestx += 4;
            Arc pacarc = new Arc();
            d.setForeground(Color.yellow);
            pacarc = new Arc(pactestx,pactesty,pacsizetest1,pacsizetest2,pacmouthtest,pacangletest);
            d.fill(pacarc);
            d.setForeground(Color.black);
            waitNSeconds(1);
            d.fill(pacarc);
            }it had no problems with the code, but it just doesnt seem to do anything when i call it in the while loop. heres how i used it to try and just make it move across with the mouth in one state:
    while (startmv++<stopmv)
    pacmve(20,20,50,50,45,270);
    }any ideas?
    Edited by: jeffsimmo85 on Nov 22, 2007 2:36 AM

    the clock is still ticking while you do this:
    while (System.currentTimeMillis() < then)
    is that method your design? why not just call Thread.sleep()?
    %

Maybe you are looking for

  • Select query performance improvement - Index on EDIDC table

    Hi Experts, I have a scenario where in I have to select data from the table EDIDC. The select query being used is given below.   SELECT  docnum           direct           mestyp           mescod           rcvprn           sndprn           upddat     

  • Oracle 11g Express for Ubuntu Linux

    Just like Oracle provided express edition for linux for 10g, will there be an easy to install express edition of 11g for linux? I mean via apt-get or debs or synaptic. Of course, synaptic being the easiest I have EVER seen oracle install on linux. I

  • Add ical events everyday except one day?

    Hi appl support community. This is my first questions on here so forgive me for any faults. I wanted to know if there is away, either first party or third party, to add an event to ical for everday except one or two days. Like making an event every m

  • Sliding panels all visible. Help!

    OK- I just can't figure this one out. I am a first timer with the spry widgets not built into Dreamweaver. I've added a sliding panel widget, I want to break a story into two parts without adding a second page. When I open in a browser, both panels a

  • N96 video

    Hi.I was format my n96 and all of my video are deleting.Is there any body to send the videos for memp4)