Please help with this simple scenario

I have two tables in two different instances, these two are linked by database link.
table A, base table
table B, read_only view connected through link.
I need them to be semi parallel in this way:
user queries emp_id to query tableA, if emp_id is available in table A, then just display id and emp_name, if nothing found, check if available in table B, if so then insert it on table A. If not available in table B, then display message.
I have tried, cursors, selects into, etc etc and no luck!, please if you time allows, write a sample code if possible.
thanks a bunch!!
joey

Hi,
fallow this,
1) Create segment (WE31) Of course it will have naming convention for different company. Here are some tips: If you copy from existing or std segment eg: Z1E1EDP01_01. If not you can just put Z1u2026.but this is only the example.
2) Create IDOC Types (WE30)
3) Create message type (WE81)
4) Link message type with basic type (WE82)
5) Create FM In the FM all the attributes should be the same for Inbound or Outbound. Basically you can get an example from the std FM eg: Inbound - IDOC_INPUT_DELVRY Outbound - IDOC_OUTPUT_SHPMNT.
6) Create Process Code (Inbound - WE41/ Outbound - WE42) IMPORTANT: Before you key in the FM, you are required to add the FM in this table V_TBD51.
7) Link FM with Basic Type For testing go to WE19.
Regard's
Shaik.

Similar Messages

Please help in this simple scenario

Hi,
There is standard query with BI Content for Incoming Orders Analysis, but i like to go for my own report with less number of fields.
These are the SAP r/3 tables with fields which i like to make use of,
1.VBAK (VKORG, VTWEG, SPART, VBELN, AUART, VBTYP, ERDAT, AUDAT, ERNM, KUNNR, VDATU)
2.VBAP (VBELN, POSNR, NETWR)
3.VBEP (VBELN, EDATU)
4.VBUK (VBELN, GBSTK)
5. VBUP (VBELN, POSNR, GBSTA)
I found the corresponding InfoObjects for all, my questions:
1. Do i have to create only one InfoStructure(LIS) for all?
2. Any guideline which to decide as Characterstics and which as keyfigures?
3.Do i have to perform any transfer rule for any of field if you have idea?
Please help.........
Thanks

Hi,
I would like to suggest you one thing. First of all, go through the standard datasources linked in your infosource. If you get all the objects in them, that's fine (hoping that you already have the infrastructure). Else you need to perform all common tasks. You will have the feilds required by you in 2LIS structures.
Comming to the point of query, do 'save as' the standard query and reduce the no. of fields.

Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.

Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.

Hello Priyanks,
I found an article with steps you can take to troubleshoot issues with an iPhone not connecting to your car stereo:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Thank you for using Apple Support Communities.
Best,
Sheila M.

My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

Following the fix here worked for me:
https://discussions.apple.com/message/15680566#15680566
except my plist file was in ~/Library instead of /Library.
-Scott

Please help with this issue "To Run a SSIS Package outside of Server Data Tools You must install Drived Column of Integration sercvies of higher" From C# app

i have searched all over the google and here on MSDN(I have read all the threads related to my problem ) , i am new to SISS and doing my clg project ,
I have this package which loads data from dim tables to a fact table , my Package runs without any problem in BIDS (2012)
I have installed SQl Server integration services on SQL and service is also running in services.msc,
the problem comes when i execute my package using my C# application i am using MSDN Method to execute a SSIS package programmatically given here.
"http://msdn.microsoft.com/en-us/library/ms136090.aspx"
For loading my FactTable i have used a Derived columns and some lookups ,
Now if i don't use derived columns and looks ups and just use source and destination component then my package runs fine from my C# application but if i use derived columns or looks ups etc it gives the following error
"Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/SSIS.Pipeline: To Run a SSIS package outside of SQL Server Data Tools you must Install Derived Column of Integration services of higher"
I am searching and trying to resolve this issue from previous 2 days but without any luck please help or guide me what is solution to this problem ,,i will be very thankful
I have also found that integration services that are running on my system have version 10.0
but the BIDS have version Version 11.0.3402.0
IS this causing problem ? if yes then what i have to do ?

Hi BlaxButt,
The package is developed in SSDT installed by SQL Server 2012, so it is a SSIS 2012 package. However, the Integration Services you have installed is SQL Server 2008 R2 version. To run the package outside SSDT, you need SSIS 2012 installed. The reason why
the package runs fine with only Source and Destination components is that such a simple package can be executed by the DTExec utility installed by SQL Server 2012 Data base Engine or Client Tools (SQL Server Import and Export Wizard). To run a package that
uses other tasks/components outside SSDT/BIDS, the SSIS runtime is also required except the DTExec utility. To obtain the SSIS 2012 runtime, we have to install SSIS 2012 on the server where the package runs.
Reference:
http://stackoverflow.com/questions/19989099/getting-error-running-ssis-package-on-non-ssis-server
Regards,
Mike Yin
TechNet Community Support

Please help with this method

im creating a little animation of pacman, just an animation of it moving buy its self. im using the java elements package so this is all being shown in a drawing window.
ive made it move fine and go round the window abit eating dots but the code is a mess, and i know i could change some of the main part into a few simple methods and have tried but it seems to stop moving when i try
below is part of the code, the first three blocks are when its moving sideways with its mouth in three different states, and the bottom three blocks are it moving down with its mouth in three states again.
Arc pacarc = new Arc();
while (startmv++<stopmv)
pac1x += 4;
d.setForeground(Color.yellow);
pacarc = new Arc(pac1x,pac1y,pacsize1,pacsize2,pacmouth1,pacangle1);
d.fill(pacarc);
d.setForeground(Color.black);
waitNSeconds(1);
d.fill(pacarc);
pac1x += 4;
d.setForeground(Color.yellow);
pacarc = new Arc(pac1x,pac1y,pacsize1,pacsize2,pacmouth2,pacangle2);
d.fill(pacarc);
d.setForeground(Color.black);
waitNSeconds(1);
d.fill(pacarc);
pac1x += 4;
d.setForeground(Color.yellow);
pacarc = new Arc(pac1x,pac1y,pacsize1,pacsize2,pacmouth3,pacangle3);
d.fill(pacarc);
d.setForeground(Color.black);
waitNSeconds(1);
d.fill(pacarc);
while (startdwn++<stopdwn)
pac1y +=4;
d.setForeground(Color.yellow);
pacarc = new Arc(pac1x,pac1y,50,50,pacdwn1,pacdwnang1);
d.fill(pacarc);
d.setForeground(Color.black);
waitNSeconds(1);
d.fill(pacarc);
pac1y +=4;
d.setForeground(Color.yellow);
pacarc = new Arc(pac1x,pac1y,50,50,pacdwn2,pacdwnang2);
d.fill(pacarc);
d.setForeground(Color.black);
waitNSeconds(1);
d.fill(pacarc);
pac1y +=4;
d.setForeground(Color.yellow);
pacarc = new Arc(pac1x,pac1y,50,50,pacdwn3,pacdwnang3);
d.fill(pacarc);
d.setForeground(Color.black);
waitNSeconds(1);
d.fill(pacarc);
so for the first part i tried putting this into a method and running the program but where i had used the method the pacman shape just stayed still. any help please guys?
this is the code for the method i tried (this is just for thefirst state of the pacmans mouth while moving sideways)
public static void pacmve(int pactestx, int pactesty, int pacsizetest1, int pacsizetest2, int pacmouthtest, int pacangletest)
pactestx += 4;
Arc pacarc = new Arc();
d.setForeground(Color.yellow);
pacarc = new Arc(pactestx,pactesty,pacsizetest1,pacsizetest2,pacmouthtest,pacangletest);
d.fill(pacarc);
d.setForeground(Color.black);
waitNSeconds(1);
d.fill(pacarc);
this is the loop i where i was trying to use the method
while (startmv++<stopmv)
pacmve(20,20,50,50,45,270);
Edited by: jeffsimmo85 on Nov 22, 2007 1:18 AM

When you post a code on a public forum, the code must be:
1)Properly formatted using code tags.
2)Generally compilable and runnable for us casual forum viewers.
3)Reproducible of your problems when we run it.

I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect to my MacBook it erases everything on had on there. Can someone please help with this problem?

I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.

dwgar1322 wrote:
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
Yes, you have WD software installed REMOVE IT !!
WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
(also dont use WD drives anymore)
Read all about it here:
https://discussions.apple.com/thread/5475136?start=255&tstart=0
See their website on removing the destructive WD software here:
http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/

Please help with this error: "Your request could not be completed because of a disk error"

So photoshop cs6 was working fine a few weeks ago. After not using it for about 2 weeks, I try opening a RAW file and I get this error every time. JPGs open and work fine. I have extensively searched on the internet for solutions and have tried everything such as: disk checking, deframgenting, playing around with photoshop preferences, deleting temp files, resetting preferences, clearing disk space. I have assigned two hard drives for photoshop, one with 16 GB free and the other with 8 GB free. I am getting very frustrated. Please help!

mistahbo1 wrote:
…I have assigned two hard drives for photoshop, one with 16 GB free and the other with 8 GB free. I am getting very frustrated. Please help!
That's woefully inadequate for scratch file space.
The rule of thumb I follow says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open. I have seen the scratch file exceed 300 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
Additionally, if either one those two drives you mention with "16 GB free and the other with 8 GB free" happened to be your boot drive, you'd be in a heap of trouble because neither one of those drives has nearly enough space to accommodate the swap files of the OS and Photoshop's scratch.
As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS. I have 16 GB of RAM installed:

Please help with this method, cant get it to work correctly.

any suggestions AT ALL please, im really stuck with this.
im creating a little animation of pacman, just an animation of it moving buy its self. im using the java elements package so this is all being shown in a drawing window.
ive made it move fine and go round the window abit eating dots but the code is a mess, and i know i could change some of the main part into a few simple methods and have tried but it seems to stop moving when i try
import element.*;
import java.awt.Color;
static DrawingWindow d = new DrawingWindow(500,500);
 public static void wait1second()
 // pause for one tenth of a second second
 long now = System.currentTimeMillis();
 long then = now + 100; // 100 milliseconds
 while (System.currentTimeMillis() < then)
 public static void waitNSeconds(int number)
 int i;
 for (i = 0; i < number; i++) //allows you to determine how long to pause for
 wait1second();
public static void main(String[] args) {
 // declaring the variables
 int pacsize1 = 50, pacsize2 = 50;
 int pac1x = 20, pac1y = 20;
 int pacmouth1 = 45, pacangle1 = 270;
 int pacmouth2 = 25, pacangle2 = 320;
 int pacmouth3 = 6, pacangle3 = 348;
 int startmv = 0, stopmv = 33;
 d.setForeground(Color.black);
 Rect bkrnd = new Rect(0,0,500,500);
 d.fill(bkrnd);
 // while loop used to make the pacman shape move right across the screen with its mouth in three different states
Arc pacarc = new Arc();
 while (startmv++<stopmv)
 pac1x += 4;
 d.setForeground(Color.yellow);
 pacarc = new Arc(pac1x,pac1y,pacsize1,pacsize2,pacmouth1,pacangle1);
 d.fill(pacarc);
 d.setForeground(Color.black);
 waitNSeconds(1);
 d.fill(pacarc);
 pac1x += 4;
 d.setForeground(Color.yellow);
 pacarc = new Arc(pac1x,pac1y,pacsize1,pacsize2,pacmouth2,pacangle2);
 d.fill(pacarc);
 d.setForeground(Color.black);
 waitNSeconds(1);
 d.fill(pacarc);
 pac1x += 4;
 d.setForeground(Color.yellow);
 pacarc = new Arc(pac1x,pac1y,pacsize1,pacsize2,pacmouth3,pacangle3);
 d.fill(pacarc);
 d.setForeground(Color.black);
 waitNSeconds(1);
 d.fill(pacarc);
}so i tried making a method to make all the stuf in the while loop alot simpler but it just keeps making the pacman not move at all and im not sure why. heres the code i tried for the method:
public static void pacmve(int pactestx, int pactesty, int pacsizetest1, int pacsizetest2, int pacmouthtest, int pacangletest)
 pactestx += 4;
 Arc pacarc = new Arc();
 d.setForeground(Color.yellow);
 pacarc = new Arc(pactestx,pactesty,pacsizetest1,pacsizetest2,pacmouthtest,pacangletest);
 d.fill(pacarc);
 d.setForeground(Color.black);
 waitNSeconds(1);
 d.fill(pacarc);
 }it had no problems with the code, but it just doesnt seem to do anything when i call it in the while loop. heres how i used it to try and just make it move across with the mouth in one state:
while (startmv++<stopmv)
pacmve(20,20,50,50,45,270);
}any ideas?
Edited by: jeffsimmo85 on Nov 22, 2007 2:36 AM

the clock is still ticking while you do this:
while (System.currentTimeMillis() < then)
is that method your design? why not just call Thread.sleep()?
%

Please help with this slow internet

Can someone please help me with this slow internet. I have been looking on this forum for a while and have tried about everything I can do. I bought a new macbook, a new airport extreme base station, and have high speed internet. I can connect with a wire and it works great but wirelessly is slower than dial up. I am also not very good with computers so I am not sure how to do a lot of the things that many people say to do. I have comcast internet. If you need anymore information I will do my best to give it. Please help me fix this, remember it is the holiday season be a giver.
Thanks in advance for any help you can give.
Aaron

I believe there are several reasons for Leopard's networking issues.
I've heard it's worth a try to *turn off IPv6 in the OS network settings and your router* (if such an option exists in your router). IPv6 is the new addressing protocol which many consider to be overkill, seeing as it allows for approximately as many addresses as there are square centimeters of surface area on planet Earth (according to Wikipedia). It's also known to cause issues with Vista, which leads me to believe that the protocol is fundamentally flawed in some way.
Just a note, turning off IPv6 in the OS is easy, simply go to *System Preferences* > Network > select the *network type* you're using (i.e. Wi-fi, ethernet, FireWire). Then click the Advanced... button, go to the TCP/IP tab, and say *Configure IPv6: Off*.
Upgrading your router's firmware is worth a try, although such updates should only be performed through the ethernet connection, not over Wi-Fi (otherwise you could risk turning your router into a giant paperweight). You should also take note of your router settings prior to the firmware upgrade, because they will probably be reset with the upgrade.
Check your *Activity Monitor* in Applications under Utilities. Right-click (or control-click) on the *Activity Monitor* icon and tell the *Dock Icon* to *Show CPU Usage*. Keep an eye on the CPU usage in the dock and if it goes higher than expected, click on the icon and tell the window to *Show Active Processes*, and/or organize the processes by order of CPU usage.
Leopard doesn't have "nice" processes anymore and I find that some processes that like to use the network prevent other processes from using the network simultaneously. I think a lot of the network issues people are having are due to *Quick Look*, mdworker, and mds. These processes seem to like to go out on the network and make notes about every server available, however there doesn't seem to be any way to make these processes "nice" or kill them permanently without losing valuable system functions. It's interesting, at least, to see the probable cause of some of these networking problems, even if we can't fix them.
By now, I'm sure I sound like I'm babbling, but I hope at least some of this helps somebody out there.

Can someone help with this simple application

I am taking my first java class and there are limited resourses for the class as far as getting help with coding.
Any hoo if any one can point me in the correct direction from the following information listed below I would be greatfull. I am trying to use the set and get methods on the instance veriables and then I am goign to post the results once I get them workign to a JOption pane window.
examples are most welcome thanks
// Invoice.java
// Homework assignment 3.13
// Student Arthur Clark
public class Invoice // public class
String partNumber;// instance veriable quantity
String partDescription;// instance verialbe partDescription
//constructors
public void setpartNumber( String number, String description )
          partNumber = number; //initalize quantity
          partDescription = description; // initalize partDescription
     }// end constructors
//method getpartNumber
public String getpartNumber()
          return partNumber;
     }//end method getpartNumber
public String getpartDescription()
          return partDescription;
     }// end method getpartDescription
public void displayMessage()
     //this is the statement that calls getpartNumber
     System.out.printf(" part number # \n%s!\n the description", getpartNumber(), getpartDescription() );
} // method displaMessage
}// end method main
// Fig. 3.14 InvoiceTest.java
// Careate and manipulate an account object
import java.util.Scanner;
import javax.swing.JOptionPane;//import JOptionPane
public class InvoiceTest{
     // main method begins the exciution of the program
     public static void main ( String args [] )
          // create Scanner to obtain input from mommand window
          Scanner input = new Scanner ( System.in );
          // create a Invoice object and assig it to mymethod
          Invoice myMethod = new Invoice();
          Invoice myMethod2 = new Invoice();
          // display inital value of partName, partDescriptoin
          System.out.printf( "inital partname is %s\n\n", myMethod.getpartNumber() );
          // prompt for and read part name, partDescription
          System.out.println( "please enter the Part Number:" );
          String theNumber = input.nextLine(); // read a line of text
          myMethod.setpartNumber( theNumber ); // set the part name with in the parens
          System.out.println();// outputs blank line
          myMethod.displayMessage();
          System.out.println( "please enter the Part Description" );
          String theDescription = input.nextLine(); // read a line of text
          myMethod2.setpartDescription( theDescription );// set the part description
          System.out.println();// outputs blank line
          myMethod2.displayMessage();
     }// end main mehtod
}// end class

//constructors
public void setpartNumber( String number, String description )
          partNumber = number; //initalize quantity
          partDescription = description; // initalize partDescription
     }// end constructorsThe above code is not a constructor. You do not include a return type, void or anything else. Also, the constructor should be called the same as your class.
public Invoice( String number, String description )
          partNumber = number;
          partDescription = description;
     } Another thing, comments should only be used when it isn't bleedingly obvious what your code is doing.
P.S. is your middle initial C?

Please help with this part of error...

Hi all,
Please help me with this error. What i was trying to do is that when Server send a message to client, it print out on the screen what is sent to Client. For instance, if the Message is called FirstMessage sent to Client, the message FirstClient will display from server console with a specific message such as "First Message from server to client: first Message") and so on. I tried to implement the below code but when compiled it i got error message as follows :
C:\Java\bin>javac QuoteServer.java
QuoteServer.java:60: <identifier> expected
out.close();
^
QuoteServer.java:61: <identifier> expected
in.close();
^
QuoteServer.java:62: <identifier> expected
clientSocket.close();
^
QuoteServer.java:63: <identifier> expected
myserverSocket.close();
^
4 errors
Her is the Server side socket...
import java.net.*;
import java.io.*;
import java.util.*;
class QuoteServer
public static void main(String[] args) throws IOException
ServerSocket myserverSocket = null;
try
myserverSocket = new ServerSocket(4998);
} catch (IOException e)
 System.err.println("Could not listen on port: 4998.");
 System.exit(1);
Socket clientSocket = null;
try
clientSocket = myserverSocket.accept();
} catch (IOException e)
 System.err.println("Accept failed.");
 System.exit(1);
 PrintWriter out = new PrintWriter(clientSocket.getOutputStream(), true);
 BufferedReader in = new BufferedReader(
 new InputStreamReader(
 clientSocket.getInputStream()));
 String inputLine, outputLine;
 QuoteProtocol QP = new QuoteProtocol();
 outputLine = QP.processInput(null);
 Date current = new Date();
 out.println(outputLine);
 String ToClient;
 while ((inputLine = in.readLine()) != null )
 outputLine = QP.processInput(inputLine);
 out.println(outputLine);
 System.out.println(inputLine);
 System.out.println(current.toString());
 /* additional..if doesn't work delete this code*/
 while ((ToClient = in.readLine()) != null)
 System.out.println("Server: " + ToClient);
 if (ToClient.equals("Bye."))
 break;
 /* delete up to break*/
 if (outputLine.equals("Bye."))
 break;
out.close();
in.close();
clientSocket.close();
myserverSocket.close();
Could someone with the expertise advise me what shall i do?
Thank you very much.
Audrea.

Thanks for the quick reply...
Here is the code with correct open/close braces...
import java.net.*;
import java.io.*;
import java.util.*;
class QuoteServer
public static void main(String[] args) throws IOException
ServerSocket myserverSocket = null;
try
myserverSocket = new ServerSocket(4998);
} catch (IOException e)
 System.err.println("Could not listen on port: 4998.");
 System.exit(1);
Socket clientSocket = null;
try
clientSocket = myserverSocket.accept();
} catch (IOException e)
 System.err.println("Accept failed.");
 System.exit(1);
 PrintWriter out = new PrintWriter(clientSocket.getOutputStream(), true);
 BufferedReader in = new BufferedReader(
 new InputStreamReader(
 clientSocket.getInputStream()));
 String inputLine, outputLine;
 QuoteProtocol QP = new QuoteProtocol();
 outputLine = QP.processInput(null);
 Date current = new Date();
 out.println(outputLine);
 String ToClient;
 while ((inputLine = in.readLine()) != null )
 outputLine = QP.processInput(inputLine);
 out.println(outputLine);
 System.out.println(inputLine);
 System.out.println(current.toString());
 /* additional..if doesn't work delete this code*/
 while ((ToClient = in.readLine()) != null)
 System.out.println("Server: " + ToClient);
 if (ToClient.equals("Bye."))
 break;
 /* delete up to break*/
 if (outputLine.equals("Bye."))
 break;
out.close();
in.close();
clientSocket.close();
myserverSocket.close();
Line 60 starting from out.close(); onwards.
Please help..
Thanks a lot.
Audrea.

Please help with this com/apple/mrj/macos/carbon/CarbonLock

Can anyone help me with this error
java.lang.NoClassDefFoundError: com/apple/mrj/macos/carbon/CarbonLock
we have written a app that takes a digital photo with a web cam. Now get this on my macs
Please help any help Please
Craig

Thank I have seen that but thanks
I was hoping there is a way around it ??
I can not believe that Apple the makers of QuickTime don['t support Java 1.4.1
Craig

Please help with this bapi

Hi Experts!
I am trying to use 'BAPI_OUTB_DELIVERY_CONFIRM_DEC' for posting goods issue but could not succeed. I am getting the message 615 (Delivery item is not or only partially packed) when I test the same in SE37. However the same delivery, if I go to VL02n and issue post goods issue, it is succeeding. I think I am doing some mistake with the parameters to be passed to bapi. Please help me find the error as I am unable to find. I am stuck with this for pretty long time. Points assured for helpful answers.
Thanks for your time.
Krishen
DATA: itab_headerdata TYPE STANDARD TABLE OF bapiobdlvhdrcon WITH HEADER LINE.
DATA: itab_headercontrol TYPE STANDARD TABLE OF bapiobdlvhdrctrlcon WITH HEADER LINE.
DATA: itab_itemdata TYPE STANDARD TABLE OF bapiobdlvitemcon WITH HEADER LINE.
DATA: itab_itemcontrol TYPE STANDARD TABLE OF bapiobdlvitemctrlcon WITH HEADER LINE .
DATA: itab_bapiret2 TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
DATA: itab1_bapiret2 TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
DATA: itab3_bapiret2 TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
DATA: deliv_numb TYPE bapiobdlvhdrcon-deliv_numb.
Vbeln and posnr are coming from itab.
SELECT SINGLE * FROM likp
 WHERE vbeln = itab-vbeln.
SELECT SINGLE * FROM lips
WHERE vbeln = itab-posnr.
itab_headerdata-deliv_numb = likp-vbeln.
itab_headercontrol-deliv_numb = likp-vbeln.
itab_headercontrol-post_gi_flg = 'X'.
CLEAR deliv_numb.
deliv_numb = likp-vbeln.
itab_itemdata-deliv_numb = likp-vbeln.
itab_itemdata-deliv_item = lips-posnr.
itab_itemdata-dlv_qty = lips-lfimg.
itab_itemdata-sales_unit = lips-meins.
itab_itemdata-fact_unit_nom = lips-umvkz.
itab_itemdata-fact_unit_denom = lips-umvkn.
itab_itemcontrol-deliv_numb = likp-vbeln.
itab_itemcontrol-deliv_item = lips-posnr.
itab_itemcontrol-chg_delqty = 'X'.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
 EXPORTING
 header_data = itab_headerdata
 header_control = itab_headercontrol
 delivery = deliv_numb
TECHN_CONTROL =
 TABLES
HEADER_PARTNER =
HEADER_PARTNER_ADDR =
HEADER_DEADLINES =
 item_data = itab_itemdata
 item_control = itab_itemcontrol
ITEM_SERIAL_NO =
SUPPLIER_CONS_DATA =
HANDLING_UNIT_HEADER =
HANDLING_UNIT_ITEM =
HANDLING_UNIT_SERNO =
EXTENSION1 =
EXTENSION2 =
 return = itab_bapiret2.
TOKENREFERENCE =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 wait = 'X'
 IMPORTING
 return = itab1_bapiret2.

Hi Krishen
 Have done some modifications to your code. Highlighted below are the same. Please check if the same works for you.
DATA: itab_headerdata TYPE STANDARD TABLE OF bapiobdlvhdrcon WITH HEADER LINE.
DATA: itab_headercontrol TYPE STANDARD TABLE OF bapiobdlvhdrctrlcon WITH HEADER LINE.
DATA: itab_itemdata TYPE STANDARD TABLE OF bapiobdlvitemcon WITH HEADER LINE.
DATA: itab_itemcontrol TYPE STANDARD TABLE OF bapiobdlvitemctrlcon WITH HEADER LINE .
DATA: itab_bapiret2 TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
DATA: itab1_bapiret2 TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
DATA: itab3_bapiret2 TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
DATA: deliv_numb TYPE bapiobdlvhdrcon-deliv_numb.
Vbeln and posnr are coming from itab.
SELECT SINGLE * FROM likp
WHERE vbeln = itab-vbeln.
SELECT SINGLE * FROM lips
WHERE vbeln = itab-posnr.
select single kostk from vbuk into vbuk-kostk
 where vbeln = itab-vbeln
 and kostk = 'C'.
if sy-subrc ne 0.
message "Picking is not fully done
else.
itab_headerdata-deliv_numb = likp-vbeln.
itab_headercontrol-deliv_numb = likp-vbeln.
itab_headercontrol-post_gi_flg = 'X'.
CLEAR deliv_numb.
deliv_numb = likp-vbeln.
*itab_itemdata-deliv_numb = likp-vbeln.
*itab_itemdata-deliv_item = lips-posnr.
*itab_itemdata-dlv_qty = lips-lfimg.
*itab_itemdata-sales_unit = lips-meins.
*itab_itemdata-fact_unit_nom = lips-umvkz.
*itab_itemdata-fact_unit_denom = lips-umvkn.
*itab_itemcontrol-deliv_numb = likp-vbeln.
*itab_itemcontrol-deliv_item = lips-posnr.
*itab_itemcontrol-chg_delqty = 'X'.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
EXPORTING
header_data = itab_headerdata
header_control = itab_headercontrol
delivery = deliv_numb
TECHN_CONTROL =
TABLES
HEADER_PARTNER =
HEADER_PARTNER_ADDR =
HEADER_DEADLINES =
item_data = itab_itemdata
item_control = itab_itemcontrol
ITEM_SERIAL_NO =
SUPPLIER_CONS_DATA =
HANDLING_UNIT_HEADER =
HANDLING_UNIT_ITEM =
HANDLING_UNIT_SERNO =
EXTENSION1 =
EXTENSION2 =
return = itab_bapiret2.
TOKENREFERENCE =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'
IMPORTING
return = itab1_bapiret2.
endif.
Kind Regards
Eswar

Please help with this code....

I create a button with ActionListner and a writeCd method. Now I want everytime i push the button, it will read the writeCd method. I dont' know how to make it work. Please help me out as soon as possible. Thanks a lot. Below are the codes of the button and writeCd method.
class findCD implements ActionListener
public void actionPerformed(ActionEvent event)
//what do I need to put here to make the button work
//with method writeCD() below
public void writeCd() throws Exception
String outputFileName;
PrintWriter outputFile;
outputFileName = "D:\\cdoutput.txt";
outputFile = new PrintWriter(new FileWriter(outputFileName,true));
int loopTest;
do
String numStr = JOptionPane.showInputDialog("Please enter Index number");
int number = Integer.parseInt(numStr);
cC.setIndexNumber(number);
numStr = JOptionPane.showInputDialog("Please enter cd name");
number = Integer.parseInt(numStr);
cC.setCdName(number);
String message = cC.toString() +
"\nYour input is: ";
JOptionPane.showMessageDialog(null, message);
outputFile.println(numStr + "");
loopTest = JOptionPane.showConfirmDialog(null,"Do another?","",0,1);
while (loopTest == 0);
outputFile.close();

class findCD implements ActionListener
       public void actionPerformed(ActionEvent event)
            try
                 writeCd();
            } catch(Exception e){
                                    e.printStackTrace();
public void writeCd() throws Exception
      String outputFileName;
      PrintWriter outputFile;
      outputFileName = "D:\\cdoutput.txt";
outputFile = new PrintWriter(new
(new FileWriter(outputFileName,true));
         int loopTest;
         do
String numStr =
umStr = JOptionPane.showInputDialog("Please enter
Index number");
         int number = Integer.parseInt(numStr);
         cC.setIndexNumber(number);
numStr = JOptionPane.showInputDialog("Please
"Please enter cd name");
         number = Integer.parseInt(numStr);
         cC.setCdName(number);
         String message = cC.toString() +
                          "\nYour input is: ";
         JOptionPane.showMessageDialog(null, message);
        outputFile.println(numStr + "");
loopTest =
pTest = JOptionPane.showConfirmDialog(null,"Do
another?","",0,1);
         while (loopTest == 0);
       outputFile.close();
    }That should work. This also assumes that the method writeCd is in the class findCD.

Please help with this simple scenario

Similar Messages

Maybe you are looking for